Products

• Fluid: GX Cool 2192BU, Liquid, 5 gal Pail
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Spiral Flute Tap: #8-36, UNF, 3 Flute, Semi-Bottoming, 3B Class of Fit, High Speed Steel-E-PM, TiCN Finish Right Hand Flute, Right Hand Thread, Series 224
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Turning Insert: 3QP-TPMN322 BX930, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMN
• Turning Insert: 3QP-TPMN321 BX930, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMN
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Turning Insert: 3QP-TPMN321 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMN
• Masking Tape: 60 mm Wide, 55 m Long, 5.9 mil Thick, Tan Crepe Paper, Rubber Adhesive, 27 lb/in Tensile Strength
• Turning Insert: 3QP-TPMW331 BX930, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Turning Insert: 3QP-TPMW331 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Polytetrafluroethylene Film Tape: 3/4″ Wide, 36 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Turning Insert: 3QP-TPMW332 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Spiral Flute Tap: M2.6 x 0.35, MF, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D3, Series B0501000
• Turning Insert: 3QP-TPMW332 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide Spiral Flute, Series SCD
• Turning Insert: 3QP-TPMW32.51 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Turning Insert: 3QP-TPMW32.51 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide Spiral Flute, Series SCD
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide Spiral Flute, Series SCD
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Turning Insert: 3QP-TPMW331 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Slitting & Slotting Saw: 1-3/4″ Dia, 1/16″ Thick, 1/2″ Arbor Hole, 24 Teeth, Solid Carbide Bright/Uncoated
• Turning Insert: 3QP-TPMW32.51 BX930, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Turning Insert: 3QP-TPMW332 BX930, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Turning Insert: 3QP-TPMW32.52 BX310, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMW
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Polyimide Film Tape: 1/2″ Wide, 36 yd Long, 3 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 356 ° F
• Ball End Mill: 0.1181″ Dia, 0.0945″ LOC, 2 Flute, Solid Carbide 63 mm OAL, 6 mm Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Way Oil: WL-32, 5 gal Pail
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Ball End Mill: 0.1875″ Dia, 0.285″ LOC, 6 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlTiN Nano Coated, Single End
• Square End Mill: 1/8'' Dia, 3/16'' LOC, 1/4'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 3/32'' Dia, 9/64'' LOC, 1/4'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Ball End Mill: 0.118″ Dia, 1.42″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Roughing End Mills; Mill Diameter (mm): 6.00; Mill Diameter (Decimal Inch): 0.2360; Number of Flutes: 4; Pitch: Close; Length of Cut (mm): 15.0000; Shank Diameter (mm): 6.0000; Material: Solid Carbide; Finish/Coating: TiAlSiN; Overall Length (mm): 57.0000
• Roughing End Mills; Mill Diameter (mm): 6.00; Mill Diameter (Decimal Inch): 0.2360; Number of Flutes: 4; Pitch: Close; Length of Cut (mm): 13.0000; Shank Diameter (mm): 6.0000; Material: Solid Carbide; Finish/Coating: TiAlSiN; Overall Length (mm): 57.0000
• Roughing End Mills; Mill Diameter (mm): 6.00; Mill Diameter (Decimal Inch): 0.2360; Number of Flutes: 4; Pitch: Close; Length of Cut (mm): 11.0000; Shank Diameter (mm): 6.0000; Material: Solid Carbide; Finish/Coating: TiAlSiN; Overall Length (mm): 57.0000
• Tool Pouches & Holsters
• Guhring Roughing End Mill for High Tensile Materials 8.00mm Diameter 8.0mm Shank 19.00mm Length of Cut 63mm Overall
• Guhring Roughing End Mill for Tough Materials 8.00mm Diameter 8.0mm Shank 19.00mm Length of Cut 63mm Overall
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Ball End Mill: 0.078″ Dia, 0.117″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Ball End Mill: 0.093″ Dia, 1.4″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Ball End Mill: 0.375″ Dia, 4 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Swivel Top Plate Caster: Phenolic, 6″ Wheel Dia, 1-3/4″ Wheel Width, 772 lb Capacity, 7-15/16″ OAH 3.3125″ Plate Length, 4.5″ Plate Width, No Brake
• Ball End Mill: 0.02″ Dia, 0.2″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Spiral Point Tap: M16 x 2, Metric, 3 Flutes, Plug, 6H, Black Oxide Finish 2.087″ Thread Length, 4.3307″ OAL, Right Hand, Series PRO-961SP
• 3/8″ Diam 6-Flute 35/38° Solid Carbide 0.06″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 7/8″ LOC, 2-3/4″ OAL, 3/8″ Shank Diam, Centercutting, Standard Length
• 3/8″ Diam 6-Flute 35/38° Solid Carbide 0.09″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 7/8″ LOC, 2-3/4″ OAL, 3/8″ Shank Diam, Centercutting, Standard Length
• 3/8″ Diam 6-Flute 35/38° Solid Carbide 0.01″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 7/8″ LOC, 2-3/4″ OAL, 3/8″ Shank Diam, Centercutting, Standard Length
• 3/8″ Diam 6-Flute 35/38° Solid Carbide 0.015″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 7/8″ LOC, 2-3/4″ OAL, 3/8″ Shank Diam, Centercutting, Standard Length
• 3/8″ Diam 6-Flute 35/38° Solid Carbide 0.02″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 7/8″ LOC, 2-3/4″ OAL, 3/8″ Shank Diam, Centercutting, Standard Length
• 3/8″ Diam 6-Flute 35/38° Solid Carbide 0.03″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 7/8″ LOC, 2-3/4″ OAL, 3/8″ Shank Diam, Centercutting, Standard Length
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, 2-3 P, 3B Class of Fit, High Speed Steel-E, GLT-1 Finish 3.937″ OAL, Left Hand Flute, Left Hand Thread, X, Series Enorm Z
• Pipe Wrench: 10-1/2″ OAL, Steel 2-5/8″ Max Pipe Capacity
• Spiral Flute Tap: BSP, 3 Flute, 2-3 P, High Speed Steel-E, Steam Oxide Finish Right Hand Flute, Right Hand Thread, Series 5732
• Turning Insert: 2QP-CCGT32.52HP BXM10, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: 2QP-CCGT21.51HP BXM10, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: 2QP-CCGT32.51HP BXM10, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: 2QP-CCGT32.51HP BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: 2QP-CCGT21.51HP BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: 2QP-CCGT32.52HP BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: 2QP-DCGT32.52HP BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: 2QP-DCGT32.51HP BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: 2QP-DCGT21.51HP BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: CCGW3255FNA4Q CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: 2QP-CCGT21.51HP BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: 2QP-DCGT32.52HP BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: 2QP-DCGT32.52HP BXM10, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: 2QP-DCGT21.51HP BXM10, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: 2QP-CCGT32.52HP BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Drawer Pulls; Handle Diameter: 0.4898; Width (Decimal Inch): 4.8980; Width (mm): 120.00; Length (Inch): 4-23/32; Projection: 1.1; Center to Center: 4-1/4; Thread Size: 5; Finish/Coating: Mirror; Material Grade: 304; Additional Information: Heigth: 27 mm;
• Turning Insert: 2QP-DCGT32.51HP BXM10, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Electronic Outside Micrometer: 1″, Solid Carbide Measuring Face 0.00005″ Resolution, Ratchet & Friction Thimble
• Screw Machine Length Drill Bit: 0.281″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Corner Radius End Mill: 7/16″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 7/16″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Woodruff Keyseat Cutter: 0.375″ Cut Dia, 0.045″ Cut Width, 3/8″ Shank Dia, Straight Tooth 2-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 0.375″ Cut Dia, 0.05″ Cut Width, 3/8″ Shank Dia, Straight Tooth 2-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Finish
• Spiral Flute Tap: 1/4-28, LK, Modified Bottoming, LK Class of Fit, Cobalt, TICN Finish 0.669″ Thread Length, 3.15″ OAL, Right Hand Flute, Right Hand Thread, BT, Series BU459600
• Ball End Mill: 0.4375″ Dia, 4 Flute, Solid Carbide 4″ OAL, 7/16″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Turning Insert: LNMN381232S15015, Ceramic AlTiN Finish, Neutral, N/A Rectangle, Series LNMN
• Woodruff Keyseat Cutter: 0.375″ Cut Dia, 0.06″ Cut Width, 3/8″ Shank Dia, Straight Tooth 2-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Finish
• Turning Insert: LNMN381232P20015, Ceramic AlTiN Finish, Neutral, N/A Rectangle, Series LNMN
• Clear Double-Sided Acrylic Tape: 1″ Wide, 2 yd Long, 20 mil Thick, Acrylic Adhesive
• Woodruff Keyseat Cutter: 0.375″ Cut Dia, 0.156″ Cut Width, 3/8″ Shank Dia, Straight Tooth 2-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Finish
• Screw Machine Length Drill Bit: 0.277″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Turning Insert: CCGW32.51FN_A4 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: SCGW32.52FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 90.0 &deg N/A Square, Series SCGW
• Turning Insert: SCGW32.53FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0472″ Corner Radius, 90.0 &deg N/A Square, Series SCGW
• Internal Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Left Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• Turning Insert: DCGT21.5.5FNA4 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: SCGW32.51FN_A4 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 90.0 &deg N/A Square, Series SCGW
• Internal Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Right Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Right Hand Cut, Carbide 2.4409″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Left Hand Cut, Carbide 2.4409″ OAL, 0.0039″ Corner Radius
• Turning Insert: 2QP-CCGW32.52-WL BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9907; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: 2QP-CCGW32.52-WL BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: 2QP-CCGW32.51-WL BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Square End Mill: 5/16'' Dia, 7/8'' LOC, 5/16'' Shank Dia, 3-1/4'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6485
• Masking Tape: 60 yd Long, 6.7 mil Thick, White Paper, Rubber Adhesive, 20 lb/in Tensile Strength
• Electromagnet Lock Accessories; Type: Door Cord; For Use With: Access Control; Material: Brass; Material: Brass; For Use With: Access Control; Type: Door Cord; Accessory Type: Door Cord; Type: Door Cord
• Double Angle Milling Cutter: 90 °, 3/8″ Cut Dia, 1/4″ Cut Width, 3″ Shank Dia, Solid Carbide 2-1/2″ OAL, AlTiN Coated, 6 Teeth
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Combo Drill & Countersink:120 ™, Solid Carbide Coated Finish, 27″ OAL, Right Hand Cut, Series V95
• Polytetrafluroethylene Film Tape: 2″ Wide, 5 yd Long, 10 mil Thick 60 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Glass Cloth Tape; Width (Inch): 1; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 3.0000; Tensile Strength (Lb./Inch): 70.00; Maximum Operating Temperature (F): 500.000
• Jobber Length Drill Bit: 0.404″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, 2-3 P, 6HX Class of Fit, TiN Finish Right Hand Flute, Right Hand Thread, D5, Series Enorm
• Square End Mill: 21mm LOC, 8mm Shank Dia, 80mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6481
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 5.5; Width (Inch): 0.14; Color: Yellow
• Corner Radius End Mill: 3/8″ Dia, 3/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 5.5; Width (Inch): 0.14; Color: Fluorescent Orange
• Spiral Point Tap: 7/16-20, UNF, 3 Flutes, Plug, VC-10 Finish 0.858″ Thread Length, 3.93″ OAL, Right Hand, H4, Series 316TI
• Spiral Point Tap: 7/16-20, UNF, 3 Flutes, Plug, VC-10 Finish 0.858″ Thread Length, 3.93″ OAL, Right Hand, H3, Series 316TI
• Double Angle Milling Cutter: 90 °, 3/8″ Cut Dia, 1/4″ Cut Width, 3″ Shank Dia, Solid Carbide 2-1/2″ OAL, Uncoated, 6 Teeth
• Ball End Mill: 0.015″ Dia, 0.022″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Internal Boring Bar: 0.315″ Min Bore, 1.063″ Max Depth, Left Hand Cut, Carbide 2.0472″ OAL, 0.0079″ Corner Radius
• Guhring Roughing End Mill for Tough Materials 6.00mm Diameter 6.0mm Shank 13.00mm Length of Cut 57mm Overall
• Corner Radius End Mill: 3/8″ Dia, 1-1/2″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1/32″ Dia, 3/32″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Diamond Coated, Corner Radius End, Centercutting
• Internal Boring Bar: 0.315″ Min Bore, 1.063″ Max Depth, Left Hand Cut, Carbide 2.0472″ OAL, 0.0039″ Corner Radius
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Diamond Coated, Corner Radius End, Centercutting
• Double Angle Milling Cutter: 90 °, 5/16″ Cut Dia, 1/8″ Cut Width, 5/16″ Shank Dia, Solid Carbide 3″ OAL, AlTiN Coated, 6 Teeth
• Internal Boring Bar: 0.315″ Min Bore, 1.063″ Max Depth, Right Hand Cut, Carbide 2.0472″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 1.063″ Max Depth, Right Hand Cut, Carbide 2.0472″ OAL, 0.0079″ Corner Radius
• Ball End Mill: 0.375″ Dia, 5 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Ball End Mill: 0.375″ Dia, 4 Flute, Solid Carbide 5″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Ball End Mill: 0.015″ Dia, 0.023″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Ball End Mill: 0.047″ Dia, 0.071″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Ball End Mill: 0.015″ Dia, 0.045″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Milling Inserts; Insert Style: XBAD; Insert Size: 250; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XBAD; Coating/Finish: DLC; Width (D
• Door Closer Accessories; Type: Door Position Switch; For Use With: Metal Doors & Frames; Color: White; Type: Door Position Switch; Accessory Type: Door Position Switch; For Use With: Metal Doors & Frames
• 145° 2-1/2″ OAL 2-Flute Solid Carbide Spotting Drill AlTiN Finish, 3/8″ Shank Diam, RH Cut, Series 200S
• Milling Inserts; Insert Style: XRAD; Insert Size: 25010; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XRAD; Coating/Finish: DLC; Width
• Turning Insert: 2QP-DCGW32.52 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Milling Inserts; Insert Style: XRAD; Insert Size: 25020; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XRAD; Coating/Finish: DLC; Width
• Milling Inserts; Insert Style: XRAD; Insert Size: 25005; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XRAD; Coating/Finish: DLC; Width
• Turning Insert: CCGW21.5.5FNA2 CTDCD10, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: 2QP-CCGW32.52 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGT3251FNA4CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: DCGT3251FNA4CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Corner Radius End Mill: 1/2″ Dia, 3/4″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.01″ Dia, 0.015″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Milling Insert: XOHX 254050-MR2 CTPP211, CTPP211, Solid Carbide N/A Finish, 1.0000″ OAW
• Door Closer Accessories; For Use With: Yale 51 Series Door Closer; Finish/Coating: Sprayed Bronze; For Use With: Yale 51 Series Door Closer
• Door Closer Accessories; For Use With: Yale 51 Series Door Closers; Finish/Coating: Sprayed Aluminum; For Use With: Yale 51 Series Door Closers
• Spiral Flute Tap: M16 x 1.50, Metric Fine, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Drill Mills; Mill Diameter (Inch): 3/8; Mill Diameter (Decimal Inch): 0.3750; Length of Cut (Inch): 7/8; Number Of Flutes: 4; End Mill Material: Solid Carbide; Shank Diameter (Inch): 3/8; Shank Diameter (Decimal Inch): 0.3750; Point Angle: 100.00; Overall
• Spiral Flute Tap: 9/16-18, UNF, 3 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 0392
• Glass Cloth Tape; Width (Inch): 3; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 10.0000; Tensile Strength (Lb./Inch): 225.00; Maximum Operating Temperature (F): 500.000
• Spiral Flute Tap: 7/16-20, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 1.614″ Thread Length, 3.937″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• 4' x 1/4″ x 150' Heavy-Duty Fire-Retardant Multi-Purpose Net Polyethylene, Orange
• Screw Machine Length Drill Bit: 0.3897″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• Clear Double-Sided Acrylic Tape: 3/4″ Wide, 40 mil Thick, Acrylic Adhesive
• Duct Tape: 4″ Wide, 4 mil Thick, Aluminum Foil Acrylic Adhesive, 16 lb/in Tensile Strength
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 3/8; Mill Diameter (Decimal Inch): 0.3750; Length of Cut (Inch): 0.4880; Connection Type: E10; Overall Length (Inch): 0.9290; Flute Type: Spiral; Material Grade: WJ30RA; Helix Angle: 50;
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 10.00; Mill Diameter (Decimal Inch): 0.3940; Length of Cut (mm): 12.4000; Connection Type: E10; Overall Length (mm): 23.6000; Flute Type: Spiral; Material Grade: WJ30RA; Helix Angle: 50; C
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 3/8; Mill Diameter (Decimal Inch): 0.3750; Length of Cut (Inch): 0.4880; Connection Type: E10; Overall Length (Inch): 0.9290; Flute Type: Spiral; Material Grade: WJ30RD; Helix Angle: 50;
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 10.00; Mill Diameter (Decimal Inch): 0.3940; Length of Cut (mm): 12.4000; Connection Type: E10; Overall Length (mm): 23.6000; Flute Type: Spiral; Material Grade: WJ30RD; Helix Angle: 50; C
• Spiral Flute Tap: M16 x 2.00, Metric Coarse, 4 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal, Steam Oxide Finish 0.64″ Thread Length, 3.8125″ OAL, Right Hand Flute, Right Hand Thread, D7, Series 717
• Corner Radius End Mill: 1/2″ Dia, 7/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 0.5″ Dia, 4 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Ball End Mill: 0.047″ Dia, 0.57″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 283
• Electromagnet Lock Accessories; Type: Wire Harness; For Use With: McKinney QC Concealed Circuit Electric Hinges; Material: Plastic; Material: Plastic; For Use With: McKinney QC Concealed Circuit Electric Hinges; Type: Wire Harness; Accessory Type: Wire Ha
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.02″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Milling Insert: KDMB25M0ERGP, KCPK10, Cast Iron & Steel N/A Finish, 0.9843″ OAW
• Duct Tape: 3″ Wide, 2.6 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Polyimide Film Tape: 1″ Wide, 36 yd Long, 2.6 mil Thick 32 Lb/In Tensile Strength, Silicone Adhesive, -40 to 365 ° F
• Corner Radius End Mill: 0.1181″ Dia, 5 Flutes, Solid Carbide 30 ° Helix, WXS Coated, Series 4572
• High Speed Steel Solid Pilot Counterbore Bright (Polished), 0.4925″ Diam Straight Shank, 0.5122″ Pilot Diam, 100mm OAL
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 1.26
• Spiral Flute Tap: 1/2-13, UNC, 4 Flute, Semi-Bottoming, High Speed Steel-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H11, Series TC117
• Corner Radius End Mill: 0.1969″ Dia, 0.5118″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Ball End Mill: 0.1181″ Dia, 0.315″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Corner Chamfer End Mill: 0.4724″ Dia, 1.4173″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.74 mm OAL, AlTiN Coated
• Ball End Mill: 0.7874″ Dia, 1.4961″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Milling Insert: WMP45G, Solid Carbide N/A Finish,
• Corner Chamfer End Mill: 0.5512″ Dia, 1.6535″ LOC, 5 Flute, 0.0157″ Chamfer Width, Solid Carbide 4.13 mm OAL, AlTiN Coated
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated
• Corner Chamfer End Mill: 0.3125″ Dia, 0.9375″ LOC, 4 Flute, 0.0064″ Chamfer Width, Solid Carbide 3″ OAL, 5/16″ Shank Dia, AlTiN Coated, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 9/16″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Ball End Mill: 0.1181″ Dia, 0.315″ LOC, 2 Flute, Solid Carbide Uncoated
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Spiral Flute Tap: M10 x 1.00, Metric Fine, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4637
• Chamfer Mill: 0.375″ Dia, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, Nano-A Coated
• Boring Bar: 0.49″ Min Bore, 2-1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/2″ Shank Dia, 4″ OAL, 0.006″ Corner Radius
• Polyimide Film Tape: 1/2″ Wide, 36 yd Long, 2.5 mil Thick 35 Lb/In Tensile Strength, Silicone Adhesive, 356 ° F
• Glass Cloth Tape; Width (Inch): 3/4; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 5.0000; Tensile Strength (Lb./Inch): 120.00; Maximum Operating Temperature (F): 500.000
• Brackets; Type: Folding Bracket; Length (mm): 430.80; Width (mm): 77.00; Height (mm): 50.0000; Load Capacity (Lb.): 132.000; Finish/Coating: Black; Minimum Order Quantity: Aluminum; Material: Aluminum
• Drawer Slides; Type: Soft-Close Drawer Slide; Extension Style: Full; Slide Length: 600.00; Travel Length: 600.00; Load Capacity (Lb.): 73.000; Width (Inch): 0.5; Additional Information: Mounting Type: Side; Slide Length: 600.00; Material: Stainless Steel;
• 1-49/64 Inch Long, Swing Friction Hook 17.00 Load Capacity
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, TICN Finish 3.543″ OAL, Right Hand Flute, Right Hand Thread, H5, Series BU979000
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, Bright/Uncoated
• Spiral Point Tap: M14 x 2, Metric, 3 Flutes, Plug, HSSE Finish 24 mm Thread Length, 110 mm OAL, Right Hand, D7, Series 346
• Spiral Point Tap: M14 x 1.5, Metric, 3 Flutes, Plug, HSSE Finish 24 mm Thread Length, 100 mm OAL, Right Hand, D6, Series 346
• Square End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4720; Number of Flutes: 6; Length of Cut (mm): 14.5000; Connection Type: E12; Overall Length (mm): 28.3000; Material: Solid Carbide; Finish/Coating: AlTiN/ZrN; Cutting Direc
• Spiral Flute Tap: M10 x 1.00, Metric Fine, 3 Flute, Semi-Bottoming, 6GX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D7 & D8, Series 4628
• Ball End Mill: 0.01″ Dia, 0.008″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Square End Mill: 1/2'' Dia, 2'' LOC, 1/2'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/2'' Dia, 2'' LOC, 1/2'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Polytetrafluroethylene Film Tape: 2″ Wide, 5 yd Long, 4 mil Thick 19 Lb/In Tensile Strength, Rubber Adhesive, 500 ° F
• Ball End Mill: 0.125″ Dia, 0.187″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.1562″ Dia, 0.234″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 35 ° Helix, Uncoated, Single End
• Impact Socket: 1″ Drive 6-Point
• Ball End Mill: 0.031″ Dia, 0.047″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Combo Drill & Countersink: #3, 1/4″ Body Dia, 118 ™, Solid Carbide Bright (Polished) Finish, 7/64″ Point Dia, 2″ OAL, Right Hand Cut, Series 8105
• Clear Double-Sided Acrylic Tape: 3/4″ Wide, 20 mil Thick, Acrylic Adhesive
• Polyimide Film Tape: 1/2″ Wide, 36 yd Long, 2.7 mil Thick 33 Lb/In Tensile Strength, Silicone Adhesive, -99.4 to 500 ° F
• Ball End Mill: 0.1875″ Dia, 0.15″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Nano Coated, Single End
• Turning Insert: VCGT220.5FN_A5 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Turning Insert: VCGT220FN_A5 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 1/2; Mill Diameter (Decimal Inch): 0.5000; Length of Cut (Inch): 0.5710; Connection Type: E12; Overall Length (Inch): 1.1140; Flute Type: Spiral; Material Grade: WJ30TF; Helix Angle: 50;
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Semi-Bottoming, High Speed Steel-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H11, Series TC117
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4720; Length of Cut (mm): 14.5000; Connection Type: E12; Overall Length (mm): 28.3000; Flute Type: Spiral; Material Grade: WJ30TF; Helix Angle: 50; C
• Ball End Mill: 0.02″ Dia, 0.16″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Ball End Mill: 0.25″ Dia, 0.2″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Straight Flutes Tap: Metric, 5 Flutes, Bottoming, 6HX, Powdered Metal High Speed Steel, TiAlN Finish Right Hand, Series MTS
• Polyimide Film Tape: 2″ Wide, 5 yd Long, 2.76 mil Thick 329.9 Lb/In Tensile Strength, Silicone Adhesive, -99.4 to 500 ° F
• Duct Tape: 4″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Straight Flutes Tap: Metric, 5 Flutes, Modified Bottoming, 6HX, Powdered Metal High Speed Steel, TiAlN Finish Right Hand, Series MTS
• Chamfer Mill: 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, AlTiN Coated
• Ball End Mill: 0.118″ Dia, 0.094″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Square End Mill: 1/4'' Dia, 2'' LOC, 1/4'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, Upcut Flute, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.125″ Dia, 0.188″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Ball End Mill: 0.093″ Dia, 0.14″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 1.57