Products

• Spiral Flute Tap: 5/8-18, UNF, 4 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, Bright/Uncoated 1″ Thread Length, 3.8125″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 774
• Turning Insert: DCGW32.51FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW32.5.5FNA5 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGT32.5.5FNA5 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: DCGT32.51FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: TCGW18152FNA3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGT18151FNA10 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Turning Insert: TCGW18152FNA10 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Brackets; Type: Shelf Bracket; Length (mm): 318.00; Width (mm): 23.00; Height (mm): 378.0000; Load Capacity (Lb.): 143.000; Finish/Coating: White; Minimum Order Quantity: Steel; Material: Steel
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Nano Coated, Single End
• Turning Insert: TCGW32.53FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0472″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: CNGA433FN_A6 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Square End Mill: 1/4'' Dia, 1-1/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 6 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 12 ° Helix, RH Cut, RH Flute
• Ball End Mill: 0.25″ Dia, 0.2″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Jobber Length Drill Bit: 0.3346″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 3/8'' Dia, 1/2'' LOC, 3/8'' Shank Dia, 4'' OAL, 4 Flutes, Solid Carbide Single End, Duarise Finish, Straight Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 8230
• Milling Insert: KDMB1000M0ERHC, KCPK25, Cast Iron & Steel N/A Finish, 1.0000″ OAW
• Milling Insert: KDMB25M0ERHC, KCPK25, Cast Iron & Steel N/A Finish, 0.9843″ OAW
• Ball End Mill: 0.1875″ Dia, 0.15″ LOC, 2 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 45 ° Helix, TiB2 Coated, Single End
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Turning Insert: WNGA432SN009CM3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Tapered End Mill: 5 ° per Side, 3/32″ Small Dia, 3 Flutes, Solid Carbide, Square End 1/4″ Shank Dia, 4″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Square
• Turning Insert: WNGA432SN009BM3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA432SN013EM3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Undercutting End Mills; Mill Diameter (Inch): 3/16; Overall Length (Inch): 3; Radius: 0.0938; Flute Direction: Right Hand; Cutting Direction: Right Hand; Variable Helix: No; Variable Index: No; Neck Length (Decimal Inch): 1.2500; Shank Diameter (Inch): 3/
• Turning Insert: WNGA432SN009DM3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA431SN009DM3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA431SN009CM3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA432SN016EM3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA431SN011DM3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA432SN014FM3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Milling Insert: KDMT1615SRHF, KCPK25, Cast Iron & Steel N/A Finish, 0.6299″ OAW
• Turning Insert: WNGA431SN011EM3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA431SN009DM3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA433SN011DM2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA432TN009CM3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA433SN014GM2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA433SN011EM2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: WNGA433SN014FM2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• O-Ring: 0.489″ ID x 0.629″ OD, 0.07″ Thick, Dash 014, Kalrez 6230 Round Cross Section
• Black Double-Sided Polyethylene Foam Tape: 1″ Wide, 72 yd Long, 31 mil Thick, Acrylic Adhesive
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1; Length (yd): 5.00; Thickness (mil): 10.0000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 500.000; Color: Clear; Liner Material: Kraft Paper; Series: F9
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Corner Radius End
• Electromagnet Lock Accessories; Type: Armor Door Loop; For Use With: Electric Locks; Material: Aluminum; Material: Aluminum; For Use With: Electric Locks; Type: Armor Door Loop; Accessory Type: Armor Door Loop; Type: Armor Door Loop
• Warehouse Labels, Magnetic Strips, 3″ x 3″, White, 25/Case
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Turning Insert: TPGN320.5DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGN
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Diamond Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.5″ Dia, 5 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• 6, 7 Pin Best I/C Core Rim Cylinder Brass, Dark Bronze Finish
• 6, 7 Pin Best I/C Core Rim Cylinder Brass, Satin Chrome Finish
• 6, 7 Pin Best I/C Core Rim Cylinder Brass, Satin Chrome Finish
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 25; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 1.23
• Milling Insert: KDMB1000M0ERGP, KCPK10, Cast Iron & Steel N/A Finish, 1.0000″ OAW
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 3.0200; Material: Steel
• Corner Chamfer End Mill: 0.375″ Dia, 0.75″ LOC, 4 Flute, Cobalt 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, TiCN Coated, Centercutting
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 0.98
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 10; Overall Length: 1.57
• Ball End Mill: 0.315″ Dia, 0.748″ LOC, 2 Flute, Solid Carbide Uncoated
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.125″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.047″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Square End Mill: 0.4724'' Dia, 1.5748'' LOC, 1 Flute, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, RH Cut, RH Flute
• UHMW Film Tape: 3″ Wide, 5 yd Long, 10 mil Thick 80 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Screw Machine Length Drill Bit: 0.2087″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series DC160
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Clear Double-Sided Acrylic Tape: 3/4″ Wide, 2 yd Long, 20 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 0.2362″ Dia, 0.012″ Radius, 5 Flutes, Solid Carbide 35 ° Helix, Corner Radius End, Series MD133
• Corner Radius End Mill: 0.2362″ Dia, 0.012″ Radius, 5 Flutes, Solid Carbide 35 ° Helix, Corner Radius End, Series MD133
• Spiral Flute Tap: 1/2-20, UNF, 3 Flute, Modified Bottoming, VC-10, V Finish 0.614″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 317Ti
• Spiral Flute Tap: 1/2-20, UNF, 3 Flute, Modified Bottoming, VC-10, V Finish 0.614″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 317Ti
• Glass Cloth Tape; Width (Inch): 3/4; Material Type: Fiberglass; PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 4.7000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• Milling Insert: KDMB16M0ERGP, KCU15, N/A Finish, 0.6300″ OAW
• Spiral Flute Tap: 7/16-20, UNF, 3 Flute, Semi-Bottoming, High Speed Steel-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H11, Series TC117
• Chucking Reamer: 0.261″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 38 ° Helix, ALtima Blaze Coated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.01″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 38 ° Helix, ALtima Blaze Coated, Corner Radius End
• Square End Mill: 15mm LOC, 10mm Shank Dia, 60mm OAL, 8 Flutes, Solid Carbide Single End, Duarise Finish, Straight Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 8235
• Turning Insert: TPGW73YDIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 3.0200; Material: Steel
• Turning Insert: TPGW731DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Turning Insert: CCGW21.5VDIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0020″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CPGA31.50.5DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CPGA
• Turning Insert: DCGW21.51DIA DX140, Polycrystalline Diamond Uncoated Finish, Right Hand, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW21.50.5DIA DX120, Polycrystalline Diamond Uncoated Finish, Right Hand, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW21.50.5DIA DX140, Polycrystalline Diamond Uncoated Finish, Right Hand, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: TPGW2.521DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Turning Insert: TPGW2.520.5DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Catches; Type: Heavy-Duty Push to Open Door Latch; Length (mm): 87.00; Height (mm): 22.0000; Width (mm): 39.00; Finish/Coating: White; Strike Length: 49.00; Strike Width: 15.00; Magnetic Force: 6.6; Minimum Order Quantity: Zinc Alloy; Material: Zinc Alloy
• Turning Insert: DCGW21.5VDIA DX140, Polycrystalline Diamond Uncoated Finish, Right Hand, 1/4″ Inscribed Circle, 0.0020″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCMT32.50.5DIA DX120, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Turning Insert: CCMT21.50.5DIA DX120, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Turning Insert: CCMT21.51DIA DX120, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Drawer Slides; Type: Soft-Close Drawer Slide; Extension Style: Full; Slide Length: 450.00; Travel Length: 450.00; Load Capacity (Lb.): 79.000; Width (Inch): 0.5; Additional Information: Mounting Type: Side; Slide Length: 450.00; Material: Stainless Steel;
• Turning Insert: DCMT21.50.5DIA DX120, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMT
• Turning Insert: DCMT21.51DIA DX120, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMT
• Turning Insert: CPGA31.51DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CPGA
• Turning Insert: CCGW32.50.5DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: TPGA221DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGA
• Catches; Type: Heavy-Duty Push to Open Door Latch; Length (mm): 87.00; Height (mm): 22.0000; Width (mm): 39.00; Finish/Coating: Black; Strike Length: 49.00; Strike Width: 15.00; Magnetic Force: 6.6; Minimum Order Quantity: Zinc Alloy; Material: Zinc Alloy
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Chucking Reamer: 0.252″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Spiral Flute Tap: 5/8-11, UNC, 4 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, Bright/Uncoated 1″ Thread Length, 3.8125″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 774
• Slitting & Slotting Saw: 4″ Dia, 5/32″ Thick, 1″ Arbor Hole, 40 Teeth, High Speed Steel TiN Finish, Straight
• Turning Insert: LNMX 30 19 40-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1575″ Corner Radius, N/A Series LNMX-PM
• Turning Insert: LNMX 30 19 40-PR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1575″ Corner Radius, N/A Series LNMX-PR
• Turning Insert: LNUX 30 19 40-PR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1575″ Corner Radius, N/A Series LNUX-PR
• Chucking Reamer: 0.252″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 2; End Mill Material: Solid Carbide; Overall Length: 1.57
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 25; Centercutting: No; Flute Type: Spiral; Number Of Flutes: 5; End Mill Material: Solid Carbide; Overall Length: 3.44
• Corner Rounding End Mill: 0.13″ Radius, 0.3125″ Diam, 4 Flutes, Solid Carbide 2.5″ OAL, 5″ Shank Dia, Bright/Uncoated, Double End
• CNC Storage Accessories; For Use With: Safe Tool Holder Fixture; Description: 1 pce. Holder jowl for 7 pcs. OZ 8-40 collets
• Woodruff Keyseat Cutter: 0.375″ Cut Dia, 0.062″ Cut Width, 3/8″ Shank Dia, Straight Tooth 2-1/2″ OAL, 8 Teeth, Solid Carbide
• Square End Mill: 3/8'' Dia, 2'' LOC, 3/8'' Shank Dia, 4'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Spiral Flute Tap: M14 x 2.00, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D9 & D10,Series 0393
• Duct Tape: 2″ Wide, 6.3 mil Thick, Lead Foil Rubber Adhesive, 15 lb/in Tensile Strength
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.02″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• White Double-Sided Foam Tape: 1″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Spiral Flute Tap: M10 x 1.25, Metric Fine, 3 Flute, Semi-Bottoming, 6HX Class of Fit, PM-HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4635
• Chamfer Mill: 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, AlTiN Coated
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU99C410
• Duct Tape: 3″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Turning Insert: CCGT3255FNA2QCB2, Polycrystalline Diamond Diamond Coating Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Spiral Flute Tap: MJ4 x 0.70, MJ, 3 Flute, Modified Bottoming, 4H Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, ACN Finish Right Hand Flute, Right Hand Thread, Series MTH
• Corner Radius End Mill: 0.0787″ Dia, 4 Flutes, Solid Carbide 30 ° Helix, WXS Coated, Series 4572
• Ball End Mill: 0.25″ Dia, 1.125″ LOC, 4 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Single End, Series XPVSB
• Spiral Flute Tap: 1/2-13, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Double Angle Milling Cutter: 60 °, 3/8″ Cut Dia, 0.082″ Cut Width, 3/8″ Shank Dia, Solid Carbide 2-1/2″ OAL, Uncoated, 6 Teeth
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel-E-PM, TiCN Finish Right Hand Flute, Right Hand Thread, Series 224
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• Milling Inserts; Insert Style: XRAD; Insert Size: 32010; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2500 to 0.3500; Length Range (Decimal Inch): 0.9000 to 1.0000; Series: XRAD; Coating/Finish: DLC; Width
• Milling Inserts; Insert Style: XRAD; Insert Size: 32020; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2500 to 0.3500; Length Range (Decimal Inch): 0.9000 to 1.0000; Series: XRAD; Coating/Finish: DLC; Width
• Milling Inserts; Insert Style: XBAD; Insert Size: 320; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2500 to 0.3500; Length Range (Decimal Inch): 0.9000 to 1.0000; Series: XBAD; Coating/Finish: DLC; Width (D
• Milling Inserts; Insert Style: XRAD; Insert Size: 32005; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2500 to 0.3500; Length Range (Decimal Inch): 0.9000 to 1.0000; Series: XRAD; Coating/Finish: DLC; Width
• Screw Machine Length Drill Bit: Solid Carbide Coated, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series 2XDCS
• Spiral Flute Tap: M7 x 1.00, DIN 371, 3 Flute, Semi-Bottoming, 6HX Class of Fit, High Speed Steel-E-PM, TiAlN Finish Right Hand Flute, Right Hand Thread, Series T300
• Ball End Mill: 0.125″ Dia, 0.188″ LOC, 2 Flute, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Hook & Loop; Shape: Square; Tape Width: 1.00 in; Color: Black; Piece Length (Inch): 1; Component Type: Hook & Loop; Number Of Pieces: 100.000
• Damping Stays; Type: Lid Stay; Capacity: 33.000; Overall Length (mm): 331.0000; Thickness (mm): 27; Width (mm): 26.50; Side: Universal; Maximum Opening: 120.000; Finish/Coating: Satin; Mounting Hole Size Diameter: 4.500; Material: 304 Stainless Steel; Cap
• Hook & Loop; Shape: Roll; Color: Black; Roll Length (Feet): 75.00; Component Type: Hook & Loop
• CNC Storage Accessories; For Use With: Tool Holder Cart; Description: 5 pcs. Tool holder twice (hook 50mm long x 40mm wide)
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.0312″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 6″ OAL, 1/4″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Spiral Flute Tap: 5/16-18, UNJC, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Turning Insert: CCGT3255FNA5CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Spiral Flute Tap: MF8 x 1.00, MF, 3 Flute, Modified Bottoming, 6HX Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Turning Insert: VCGT220.5FN_A6 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Jobber Length Drill Bit: 0.3543″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Turning Insert: CCGT3251FNA4CB3, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Screw Machine Drill Bit *31/32 HS L.H. SCREW MACHINE DRILL
• Turning Insert: VCGT220FN_A6 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0039″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Spiral Flute Tap: #2-56, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Spiral Flute Tap: M12 x 1.75, Metric, 3 Flute, Semi-Bottoming, 6H + 0.1 Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D14 & D15, Series 4627
• Turning Insert: CCGT2151FNA2CB1, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: CCGT2155FNA2CB1, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Spiral Flute Tap: M16 x 2.00, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Double Angle Milling Cutter: 60 °, 3/8″ Cut Dia, 0.082″ Cut Width, 3/8″ Shank Dia, Solid Carbide 2-1/2″ OAL, AlTiN Coated, 6 Teeth
• Ball End Mill: 0.078″ Dia, 0.062″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.093″ Dia, 0.074″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Square End Mill: 1/4'' Dia, 5/16'' LOC, 1/4'' Shank Dia, 4'' OAL, 5 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series VGM5-LN
• Impact Socket: 1″ Drive 6-Point
• Square End Mill: 3/8'' Dia, 1-1/4'' LOC, 3/8'' Shank Dia, 3'' OAL, 7 Flutes, Solid Carbide AlCrN Finish, 45 ° Helix, Centercutting, Series SM7F
• Internal Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Left Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• UHMW Film Tape: 1″ Wide, 5 yd Long, 10.2 mil Thick 30 Lb/In Tensile Strength, Rubber Adhesive, 225 ° F
• Internal Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Right Hand Cut, Carbide 2.4409″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 1.4567″ Max Depth, Right Hand Cut, Carbide 2.4409″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Right Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 1.4567″ Max Depth, Left Hand Cut, Carbide 2.4409″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 1.4567″ Max Depth, Right Hand Cut, Carbide 2.4409″ OAL, 0.0039″ Corner Radius
• Back Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Left Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 1.4567″ Max Depth, Left Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 1.4567″ Max Depth, Right Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Left Hand Cut, Carbide 2.4409″ OAL, 0.0039″ Corner Radius
• Back Boring Bar: 0.2756″ Min Bore, 1.4567″ Max Depth, Right Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 1.4567″ Max Depth, Left Hand Cut, Carbide 2.4409″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 1.4567″ Max Depth, Right Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• Ball End Mill: 0.125″ Dia, 0.125″ LOC, 3 Flute, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4630
• Internal Boring Bar: 0.315″ Min Bore, 1.4567″ Max Depth, Left Hand Cut, Carbide 2.4409″ OAL, 0.0079″ Corner Radius
• White Double-Sided Urethane Foam Tape: 1″ Wide, 5 yd Long, 250 mil Thick, Acrylic Adhesive
• Damping Stays; Type: Lid Stay; Capacity: 66.000; 30; Overall Length (mm): 259.5000; Thickness (mm): 32; Width (mm): 32.60; Side: Universal; Maximum Opening: 80.000; Finish/Coating: Plain; Mounting Hole Size Diameter: 5.100; Stroke: 1-49/64; Stroke: 1-49/6
• Latches; Type: Bar Latch; Length (mm): 100.00; Width (mm): 80.00; Height (mm): 25.5000; Finish/Coating: Polished; Distance Between Mounting Hole Centers: 66; Series: BLT; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Descript
• Brackets; Type: Folding Bracket; Length (mm): 275.90; Width (mm): 77.00; Height (mm): 50.0000; Load Capacity (Lb.): 121.000; Finish/Coating: Black; Minimum Order Quantity: Aluminum; Material: Aluminum
• Drawer Slides; Type: Soft-Close Drawer Slide; Extension Style: Full; Slide Length: 500.00; Travel Length: 500.00; Load Capacity (Lb.): 77.000; Width (Inch): 0.5; Additional Information: Mounting Type: Side; Slide Length: 500.00; Material: Stainless Steel;
• Brackets; Type: Angle Bracket; Length (mm): 150.00; Width (mm): 20.00; Height (mm): 150.0000; Load Capacity (Lb.): 22.000; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 4 Flutes, Solid Carbide 45 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.4724″ Dia, 0.4724″ LOC, 2 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 5/16″ Dia, 15/16″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 5/16″ Dia, 15/16″ LOC, 0.02″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 1/4″ Dia, 1/4″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 2024
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.062″ Cut Width, 1/4″ Shank Dia, Staggered Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Spiral Point Tap: 3/8-24, UNF & DIN/ANSI, 3 Flutes, Plug, HSS-E, TiAlN Finish 20 mm Thread Length, 90 mm OAL, Right Hand, H11, Series TC217
• Transparent Envelope Mailer: 8-3/4″ OAW, 11-3/4″ OAL
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 3.0200; Material: Steel
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.062″ Cut Width, 1/4″ Shank Dia, Staggered Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.125″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Turning Insert: TPGW32.50.5DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Turning Insert: TPGW32.52DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 3.543″ OAL, Right Hand Flute, Right Hand Thread, H4, Series BU99C400
• Turning Insert: TPGA320.5DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGA
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 3.543″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU99C410
• translucent Double-Sided Foam Tape: 6″ Wide, 5 yd Long, 25 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 3/16" Dia, 5/16" LOC, 0.0150" Radius, 5 Flute, Solid Carbide
• White Double-Sided Urethane Foam Tape: 1″ Wide, 3 yd Long, 125 mil Thick, Acrylic Adhesive
• FEP Film Tape: 2″ Wide, 5 yd Long, 3.5 mil Thick 8 Lb/In Tensile Strength, Silicone Adhesive, -100 to 400 ° F
• Ball End Mill: 0.031″ Dia, 0.046″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Turning Insert: TCGT3251FNA5CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 3/8; Mill Diameter (Decimal Inch): 0.3750; Connection Type: E10; Overall Length (Decimal Inch): 1.1575; Centercutting: Yes; Corner Radius (Decimal Inch): 0.0300; Minimum Helix Angle: 48;
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 3/8; Mill Diameter (Decimal Inch): 0.3750; Connection Type: E10; Overall Length (Decimal Inch): 1.1575; Centercutting: Yes; Corner Radius (Decimal Inch): 0.0300; Minimum Helix Angle: 48;
• Square End Mill: 5/16'' Dia, 1-1/4'' LOC, 5/16'' Shank Dia, 3'' OAL, 6 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 37 ° Helix, RH Cut, RH Flute, Series VGM6
• Fluid: GX Cool 5250TF, Liquid, 55 gal Drum
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 10.00; Mill Diameter (Decimal Inch): 0.3937; Length of Cut (mm): 12.0000; Connection Type: E10; Overall Length (mm): 29.9000; Centercutting: Yes; Corner Radius (mm): 0.50; Minimum Helix An
• Plug Thread Gage: M16x1.50 Thread, 6H Class, Go
• 120° 16mm Diam 200mm OAL Cobalt Spotting Drill Bright/Uncoated, 35mm Flute Length, 16mm Shank Diam
• Plug Thread Gage: M14x1.50 Thread, 6H Class, Go
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 10.00; Mill Diameter (Decimal Inch): 0.3937; Length of Cut (mm): 12.0000; Connection Type: E10; Overall Length (mm): 29.9000; Centercutting: Yes; Corner Radius (mm): 0.50; Minimum Helix An
• Plug Thread Gage: M16x1.50 Thread, 6H Class, No Go
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 10.00; Mill Diameter (Decimal Inch): 0.3937; Length of Cut (mm): 12.0000; Connection Type: E10; Overall Length (mm): 29.9000; Centercutting: Yes; Corner Radius (mm): 1.00; Minimum Helix An
• Plug Thread Gage: M14x1.50 Thread, 6H Class, No Go
• Impact Socket: 6-Point
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 10.00; Mill Diameter (Decimal Inch): 0.3937; Length of Cut (mm): 12.0000; Connection Type: E10; Overall Length (mm): 29.9000; Centercutting: Yes; Corner Radius (mm): 2.00; Minimum Helix An
• Plug Thread Gage: M16x2.00 Thread, 6H Class, No Go
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 10.00; Mill Diameter (Decimal Inch): 0.3937; Length of Cut (mm): 12.0000; Connection Type: E10; Overall Length (mm): 29.9000; Centercutting: Yes; Corner Radius (mm): 2.50; Minimum Helix An
• Plug Thread Gage: M16x2.00 Thread, 6H Class, Go
• Electromagnet Lock Accessories; Type: Wire Harness; For Use With: McKinney QC Concealed Circuit Electric Hinges; Material: Plastic; Material: Plastic; For Use With: McKinney QC Concealed Circuit Electric Hinges; Type: Wire Harness; Accessory Type: Wire Ha
• Square End Mill: 0.4724'' Dia, 0.9843'' LOC, 0.4724'' Shank Dia, 2.9134'' OAL, 5 Flutes, Solid Carbide AlCrN Finish, 45 ° Helix, Centercutting, Series MSM5F
• Square End Mill: 0.4724'' Dia, 0.9843'' LOC, 0.4724'' Shank Dia, 2.9134'' OAL, 5 Flutes, Solid Carbide AlTiN Finish, 45 ° Helix, Centercutting, Series MSM5F-NB
• Spiral Flute Tap