Products

• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5069; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• 5/8″ Diam 6-Flute 35/38° Solid Carbide 0.03″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 1-1/4″ LOC, 3-1/2″ OAL, 5/8″ Shank Diam, Centercutting, Standard Length
• Corner Chamfer End Mill: 0.1181″ Dia, 0.315″ LOC, 3 Flute, 0.0012″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5068; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• 5/8″ Diam 6-Flute 35/38° Solid Carbide 0.09″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 1-1/4″ LOC, 3-1/2″ OAL, 5/8″ Shank Diam, Centercutting, Standard Length
• Corner Chamfer End Mill: 0.1181″ Dia, 0.315″ LOC, 3 Flute, 0.0012″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Corner Rounding End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; Shank Type: Straight; Flute Type: Straight; Overall Length: 2.87
• 5/8″ Diam 6-Flute 35/38° Solid Carbide 0.03″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 1-1/4″ LOC, 3-1/2″ OAL, 5/8″ Shank Diam, Centercutting, Standard Length
• Corner Rounding End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; Shank Type: Straight; Flute Type: Straight; Overall Length: 2.52
• 5/8″ Diam 6-Flute 35/38° Solid Carbide 0.02″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 1-1/4″ LOC, 3-1/2″ OAL, 5/8″ Shank Diam, Centercutting, Standard Length
• Corner Rounding End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; Shank Type: Straight; Flute Type: Straight; Overall Length: 2.87
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4062; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• 5/8″ Diam 6-Flute 35/38° Solid Carbide 0.09″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 1-1/4″ LOC, 3-1/2″ OAL, 5/8″ Shank Diam, Centercutting, Standard Length
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4065; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.449″ Dia, 124 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• 5/8″ Diam 6-Flute 35/38° Solid Carbide 0.12″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 1-1/4″ LOC, 3-1/2″ OAL, 5/8″ Shank Diam, Centercutting, Standard Length
• Screw Machine Length Drill Bit: 0.469″ Dia, 124 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Screw Machine Length Drill Bit: 0.445″ Dia, 124 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Screw Machine Length Drill Bit: 0.4688″ Dia, 124 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Helical & Parabolic Flute, Straight-Cylindrical Shank, Series 131N
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4103; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Electric Strikes; Power Type: Electric; Strike Material: Steel; Finish/Coating: Brass; Voltage: 8; Material: Steel; Type of Power: Electric; Finish: Brass
• Electric Strikes; Power Type: Electric; Strike Material: Steel; Finish/Coating: Brass; Voltage: 24; Material: Steel; Type of Power: Electric; Finish: Brass
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 8; Width (Inch): 0.3; Color: Black
• Clear Double-Sided Polyethylene Foam Tape: 12″ Wide, 5 yd Long, 2 mil Thick, Acrylic Adhesive
• Electromagnet Lock Accessories; Type: Asset Tag; For Use With: RoamAlert Door Controller; Material: Plastic; Material: Plastic; For Use With: RoamAlert Door Controller; Type: Asset Tag; Accessory Type: Asset Tag; Type: Asset Tag
• Slitting & Slotting Saw: 6″ Dia, 1/16″ Thick, 48 Teeth, High Speed Steel TiN Finish, Straight
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4109; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Square End Mill: 1/8'' Dia, 1/8'' LOC, 1.5'' OAL, 1 Flute, Brazed Solid Carbide Single End, Polycrystaline Diamond Finish, Straight Flute, Centercutting, RH Cut, RH Flute
• Spiral Flute Tap: M18 x 1.50, Metric Fine, 3 Flute, 2-3 P, 6HX Class of Fit, TiN Finish 4.3307″ OAL, Right Hand Flute, Right Hand Thread, D6, Series Enorm
• Spiral Flute Tap: 7/8-14, UNF, 4 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, TICN Finish 1.024″ Thread Length, 4.921″ OAL, Right Hand Flute, Right Hand Thread, H4, Series CU459611
• Pipe Thread Plug Gage: Straight, 1-11-1/2
• Spiral Flute Tap: 1/2-13, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, TiAlN Finish 1.535″ Thread Length, 4.3307″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4118; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 11/16-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Teeth per Inch: 24; Teeth
• Spiral Flute Tap: 1/2-20, UNF, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, TiAlN Finish 1.535″ Thread Length, 4.3307″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 11/16-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Teeth per Inch: 24; Tee
• 5/8″ Diam, 1-1/4″ Length of Cut, 5/8″ Shank Diam, 3-1/2″ OAL, 4 Flute Solid Carbide Square End Mill Single End, TiAlN Finish, Spiral Flute, 30° Helix Angle, Regular Length
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 13/16-20; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Teeth p
• Ring Pipe Thread Gages; Thread Size: 3/8-18; Classification: L1; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: ANPT; Additional Information: Specification Met: SAE AS71051; Thread Size (Inch): 3/8-18
• Pipe Thread Plug Gage: Straight, 1-11-1/2
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 11/16-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Teeth p
• Spiral Flute Tap: M20 x 2.50, Metric, 4 Flute, Modified Bottoming, 6HX Class of Fit, HSS-E, TiN Finish 5.5118″ OAL, Right Hand Flute, Right Hand Thread, D7
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 11/16-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Teeth per
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4141; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: M24 x 3.00, Metric, 3 Flute, 1.5-2 P, 6H Class of Fit, HSS-E, Bright/Uncoated Right Hand Flute, Right Hand Thread, D8
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 13/16-20; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Teeth p
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4147; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Point Tap: 1/2-13, UNC, 4 Flutes, Gunnose, 2B, High Speed Steel, TiCN Finish 29/32″ Thread Length, 4.331″ OAL, Right Hand, Series 22267
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 13/16-20; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Teeth per
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4146; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 13/16-20; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Teeth per
• Screw Machine Length Drill Bit: 0.453″ Dia, 124 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4145; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Turning Insert: DNGA432-DIA DX140, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Ball End Mill: 0.625″ Dia, 4 Flute, Solid Carbide 4″ OAL, 5/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4154; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 5/8″ Dia, 1-3/4″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 5/8″ Dia, 1-3/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4157; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 5/8″ Dia, 1-3/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1/4″ Dia, 5/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 48 ° Helix, TiAlN Coated, Corner Radius End, Series CoroMill Plura
• Polyimide Film Tape: 3/4″ Wide, 36 yd Long, 2.5 mil Thick 35 Lb/In Tensile Strength, Silicone Adhesive, 356 ° F
• 120° 4″ OAL 2-Flute Solid Carbide Spotting Drill Bright/Uncoated, 1-3/4″ Flute Length, 3/4″ Shank Diam, RH Cut
• Corner Radius End Mill: 1/4″ Dia, 5/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 48 ° Helix, TiAlN Coated, Corner Radius End, Series CoroMill Plura
• Spiral Flute Tap: 9/16-12, UNC, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 4.331″ OAL, Right Hand Flute, Right Hand Thread, H4, Series CU50C310
• Corner Radius End Mill: 0.236″ Dia, 0.02″ Radius, 4 Flutes, Solid Carbide 48 ° Helix, TiAlN Coated, Corner Radius End, Series CoroMill Plura
• Corner Radius End Mill: 0.236″ Dia, 0.039″ Radius, 4 Flutes, Solid Carbide 48 ° Helix, TiAlN Coated, Corner Radius End, Series CoroMill Plura
• Screw Machine Length Drill Bit: 0.4531″ Dia, 135 °, Solid Carbide TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: M12 x 1.50, Metric Fine, 3 Flute, 2-3 P, 6HX Class of Fit, TiN Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, D6, Series Enorm
• Corner Radius End Mill: 3/8″ Dia, 0.149″ LOC, 5 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 30 ° Helix, WXS Coated, Series 4472
• Square End Mill: 1/2'' Dia, 3'' LOC, 1/2'' Shank Dia, 6'' OAL, 5 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 38 ° Helix, Centercutting, RH Cut, RH Flute
• Jobber Length Drill Bit: 85 °, Micron Grain Carbide Diamond Finish, 3.23″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series UDR5P1AA
• Ball End Mill: 0.125″ Dia, 0.187″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4125; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• 3/16″ Radius, 2-3/4″ Cut Diam, 3/8″ Circle Diam, 5/8″ Cut Width, 1″ Arbor Concave Radius Cutter High Speed Steel, TiN Finish, 5/8″ OAL, 12 Teeth, Form Relieved
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Square End Mill: 3/8'' Dia, 1'' LOC, 3/8'' Shank Dia, 3-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6485
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.1685; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #3-48; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: High
• Pipe Thread Plug Gage: 3/4-14
• Ball End Mill: 0.078″ Dia, 0.406″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Corner Radius End Mill: 1/2″ Dia, 2″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/2″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #4-40; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High Spe
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #4-40; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #3-56; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High Sp
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #4-40; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High Spe
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4131; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Square End Mill: 5/8'' Dia, 1-5/8'' LOC, 5/8'' Shank Dia, 3-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlCrN Finish, 45 ° Helix, Centercutting, RH Cut, Series SM5F
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #3-56; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #4-48; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Material: High Speed Steel; Teet
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #3-56; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High Sp
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #4-48; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: High Spe
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 23/32 in; Die Diameter: 23/32 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (I
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #4-48; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Material: High Speed Steel; Teeth p
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 11/16 in; Die Diameter: 11/16 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (I
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #4-40; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High
• Pipe Thread Plug Gage: 3/4-14
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4133; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 21/32 in; Die Diameter: 21/32 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (I
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4134; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #3-56; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #5-40; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High Spe
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #4-48; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: High
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 5/8 in; Die Diameter: 5/8 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (Inch)
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #3-48; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: High Sp
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #5-40; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 19/32 in; Die Diameter: 19/32 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (I
• Ball End Mill: 0.75″ Dia, 3″ LOC, 2 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 9/16 in; Die Diameter: 9/16 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (Inc
• Screw Machine Length Drill Bit: 0.205″ Dia, 124 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 17/32 in; Die Diameter: 17/32 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (I
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 1/2 in; Die Diameter: 1/2 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (Inch)
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 15/32 in; Die Diameter: 15/32 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (I
• Side Chip Saw: 4″ Blade Dia, 1/4″ Blade Thickness, 1″ Arbor Hole Dia, 32 Teeth, Cobalt Uncoated, Staggered Tooth
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4150; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 7/16 in; Die Diameter: 7/16 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (Inc
• Screw Machine Length Drill Bit: 0.197″ Dia, 124 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Side Chip Saw: 4″ Blade Dia, 1/8″ Blade Thickness, 1″ Arbor Hole Dia, 32 Teeth, Cobalt TiN Finish, Staggered Tooth
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 13/32 in; Die Diameter: 13/32 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (I
• Screw Machine Length Drill Bit: 0.209″ Dia, 124 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 3/8 in; Die Diameter: 3/8 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (Inch)
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4170; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4633
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4160; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 11/32 in; Die Diameter: 11/32 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (I
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4462; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.2283″ Dia, 124 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 5/16 in; Die Diameter: 5/16 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (Inc
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4399; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Spiral Flute Tap: M11 x 1.50, M, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D5, Series C0503000
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 9/32 in; Die Diameter: 9/32 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (Inc
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4386; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Electromagnet Lock Accessories; Type: Electrical Power Transfer; For Use With: Exit Devices; Material: Stainless Steel; Material: Stainless Steel; For Use With: Exit Devices; Type: Electrical Power Transfer; Accessory Type: Electrical Power Transfer; Type
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4133; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.4219″ Dia, 135 °, Solid Carbide TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ironworker Punch & Die Sets; Set Type: Punch & Die; Shape: Oblong; Punch/Die Shape: Oblong; Die Length: 2 in; Die Width: 1/4 in; Die Diameter: 1/4 in; Punch Length: 3.31 in; Punch Width: 1 in; Punch Diameter: 1 in; Number Of Pieces: 1; Punch Length (Inch)
• Glass Cloth Tape; Width (Inch): 1-1/2; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 3.0000; Tensile Strength (Lb./Inch): 70.00; Maximum Operating Temperature (F): 500.000
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4266; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Chucking Reamer: 0.3937″ Dia, 5.2362″ OAL, 1.4961″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4370; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Turning Insert: LNMM401224L-HX TT8125, Solid Carbide TiCN, Al2O3 & TiN Finish, Left Hand, 1.5740″ Long, 1″ Inscribed Circle, 0.0940″ Corner Radius, 80.0 &deg N/A Rectangle, Series LNMM
• Spiral Flute Tap: M10 x 1.50, DIN 371, 3 Flute, Semi-Bottoming, 6HX Class of Fit, High Speed Steel-E-PM, TiAlN Finish Right Hand Flute, Right Hand Thread, Series T300
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4355; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4102; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Ball End Mill: 0.4375″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 7/16″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4279; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 121
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.1552; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4595; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.015″ Radius, 2 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 121
• Square End Mill: 1/2'' Dia, 3'' LOC, 1/2'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 45 ° Helix, Centercutting, RH Cut, Series SM5F-NB
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4475; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Chamfer End Mill: 0.315″ Dia, 0.9449″ LOC, 4 Flute, 0.0063″ Chamfer Width, Solid Carbide 2.76 mm OAL, AlTiN Coated, Centercutting
• Spiral Flute Tap: M24 x 3.00, M, Modified Bottoming, 6G Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D12, Series C0503020
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4493; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.52″ OAL, 0.315″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4297; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.52 mm OAL, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4088; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Chamfer End Mill: 0.2362″ Dia, 0.7087″ LOC, 4 Flute, 0.0047″ Chamfer Width, Solid Carbide 2.44 mm OAL, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4550; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Slitting & Slotting Saw: 4″ Dia, 5/32″ Thick, 40 Teeth, High Speed Steel Bright/Uncoated, Straight
• Corner Radius End Mill: 0.2362″ Dia, 0.5118″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4529; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.386″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Corner Radius End Mill: 7/16″ Dia, 3″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 7/16″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4210; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4253; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4177; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4516; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Guhring Universal Roughing End Mill 6.00mm Diameter 6.0mm Shank 10.00mm Length of Cut 65mm Overall
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4220; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4546; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4217; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.158″ Dia, 124 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4061; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4283; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4420; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.159″ Dia, 124 °, Solid Carbide Coated, Right Hand Cut, Helical & Parabolic Flute, Straight-Cylindrical Shank, Series 131N
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4368; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4270; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4181; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4324; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4100; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4128; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Replacement Handle for #2024630, #20243580, #20243531, #20242996
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4564; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Replacement Handle for #20243671, #20243663, #20243564, #20243523, #20242988, #20242962
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4134; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4596; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4267; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Replacement Handle for #20243556, #20243044, #20243069, #20242970
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4121; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9465; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4490; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4457; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Turning Insert: NUDCGA21.51 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0984″ Long, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series NCB100
• Turning Insert: VCGT2205FNA5CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Jobber Length Drill Bit: 0.3032″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4204; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Turning Insert: NUCCGA21.51 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0984″ Long, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4387; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.165″ Dia, 124 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Spiral Flute Tap: 1/2-13, UNC, 4 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel-E-PM, TiCN Finish Right Hand Flute, Right Hand Thread, Series 224
• Jobber Length Drill Bit: 0.25″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4223; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Ball End Mill: 0.2362″ Dia, 0.5118″ LOC, 2 Flute, Solid Carbide Uncoated
• Internal Boring Bar: 0.3543″ Min Bore, 0.4724″ Max Depth, Neutral, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Ball End Mill: 0.1969″ Dia, 0.5118″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4476; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Ball End Mill: 0.2362″ Dia, 0.5118″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Internal Boring Bar: 0.3543″ Min Bore, 0.9449″ Max Depth, Neutral, Carbide 2.0472″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4583; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Ball End Mill: 0.1969″ Dia, 0.5118″ LOC, 2 Flute, Solid Carbide Uncoated
• Internal Boring Bar: 0.3937″ Min Bore, 0.4724″ Max Depth, Neutral, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4254; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Internal Boring Bar: 0.3937″ Min Bore, 0.9449″ Max Depth, Neutral, Carbide 2.0472″ OAL, 0.0079″ Corner Radius
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4040; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4285; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Internal Boring Bar: 0.3937″ Min Bore, 0.9449″ Max Depth, Neutral, Carbide 2.0472″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4308; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9332; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Internal Boring Bar: 0.3937″ Min Bore, 0.4724″ Max Depth, Neutral, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4504; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1334; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Internal Boring Bar: 0.3543″ Min Bore, 0.4724″ Max Depth, Neutral, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4481; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Jobber Length Drill Bit: 0.2992″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.2441″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Internal Boring Bar: 0.3543″ Min Bore, 0.9449″ Max Depth, Neutral, Carbide 2.0472″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4147; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Jobber Length Drill Bit: 0.2559″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Internal Boring Bar: 0.3543″ Min Bore, 0.9449″ Max Depth, Neutral, Carbide 2.0472″ OAL, 0.0079″ Corner Radius
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3696; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4428; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Internal Boring Bar: 0.3543″ Min Bore, 0.4724″ Max Depth, Neutral, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4463; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Jobber Length Drill Bit: 0.2657″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3691; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Internal Boring Bar: 0.3937″ Min Bore, 0.4724″ Max Depth, Neutral, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4152; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Internal Boring Bar: 0.3937″ Min Bore, 0.9449″ Max Depth, Neutral, Carbide 2.0472″ OAL, 0.0079″ Corner Radius
• Ball End Mill: 0.5″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4630
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4343; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4374; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability