Products

• Electronic Caliper: 0 to 8″, 0.0005″ Resolution, IP40 0.0010″ Accuracy, Data Output
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3347; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Spiral Point Tap: 5/8-18, UNF, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 3.937″ OAL, Left Hand, X, Series Rekord B
• Jobber Length Drill Bit: 0.3937″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3348; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: PTCGW18151SN011CC2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3215; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• UHMW Film Tape: 1-1/2″ Wide, 5 yd Long, 15.2 mil Thick 55 Lb/In Tensile Strength, Rubber Adhesive, 225 ° F
• Turning Insert: PTCGW2152SN014EC2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3213; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: PTCGW18155SN011CC3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3344; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: PTCGW18151ENC2 CTBH15C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3211; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9598; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3212; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XP
• Polytetrafluroethylene Film Tape: 4″ Wide, 5 yd Long, 5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3346; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Chamfer Mill: 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2876; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2874; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2877; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Warehouse Labels, Magnetic Rolls, 1″ x 100', Orange, 1/Case
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2879; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3200; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Square End Mill: 5/8'' Dia, 1-1/2'' LOC, 5/8'' Shank Dia, 5'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6485
• Spiral Flute Tap: 1/2-20, UNF, 3 Flute, 2-3 P, 2B Class of Fit, HSS-E, TICN Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H5
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3282; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.25″ Dia, 0.375″ LOC, 2 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2878; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.1875″ Dia, 0.281″ LOC, 4 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Nano Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3400; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.25″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Nano Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3283; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3300; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Spiral Point Tap: Metric, 4 Flutes, Gunnose, 6HX, High Speed Steel, TiCN Finish 0.709″ Thread Length, 3.937″ OAL, Right Hand, Series 212661
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3100; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Chamfer Mill: 0.75″ Dia, 4 Flutes, Solid Carbide 4″ OAL, 3″ Shank Dia, AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3284; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/8″ Dia, 0.844″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2929; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.52 mm OAL, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3260; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3240; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Spiral Flute Tap: M12 x 1.50, Metric Fine, 3 Flute, Semi-Bottoming, 6HX Class of Fit, PM-HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4637
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3028; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Chamfer End Mill: 0.2362″ Dia, 0.7087″ LOC, 5 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.44 mm OAL, AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2928; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Chamfer End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3159; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill Power Series; Number Of Flutes: 4; Overall Length: 1.26
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3026; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3025; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Chamfer End Mill: 0.3937″ Dia, 1.1811″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.23 mm OAL, AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3158; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 1.26
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2922; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 0.2362″ Dia, 0.5118″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Straight Flutes Tap: 1-1/8-12, UNF, 4 Flutes, Taper, 2B & 3B, High Speed Steel, Bright/Uncoated 2-9/16″ Thread Length, 5-7/16″ OAL, Right Hand, H4, Series 726
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3286; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 0.2362″ Dia, 0.5118″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3153; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2921; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3152; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3285; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Spiral Flute Tap: M18 x 1.50, Metric Fine, Modified Bottoming, 6HX Class of Fit, HSS-E, TiN Finish 4.3307″ OAL, Right Hand Flute, Right Hand Thread, D6
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3329; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Plug Thread Gage: M2x0.40 Thread, 6H Class, No Go
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3000; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Plug Thread Gage: M2x0.40 Thread, 6H Class, Go
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2872; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Plug Thread Gage: M2.2x0.45 Thread, 6H Class, Go
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2871; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Plug Thread Gage: M2.2x0.45 Thread, 6H Class, No Go
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2875; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2927; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: LNMX 50 14 32-XH 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1250″ Corner Radius, N/A Series LNMX-XH
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3331; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3250; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3029; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill Heads; Mill Diameter (mm): 16.00; Mill Diameter (Decimal Inch): 0.6299; Number of Flutes: 4; Length of Cut (mm): 16.0000; Connection Type: E16; Overall Length (mm): 35.6000; Material: Solid Carbide; Finish/Coating: SIRON-A; Cutting Direction
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3280; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3021; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 20.00; Mill Diameter (Decimal Inch): 0.7874; Length of Cut (mm): 11.0000; Connection Type: E20; Overall Length (mm): 40.7000; Centercutting: Yes; Corner Radius (mm): 1.00; Minimum Helix An
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2923; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 20.00; Mill Diameter (Decimal Inch): 0.7874; Length of Cut (mm): 11.0000; Connection Type: E20; Overall Length (mm): 40.7000; Centercutting: Yes; Corner Radius (mm): 0.50; Minimum Helix An
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3290; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 3/4; Mill Diameter (Decimal Inch): 0.7500; Connection Type: E20; Overall Length (Decimal Inch): 1.6024; Centercutting: Yes; Corner Radius (Decimal Inch): 0.0300; Minimum Helix Angle: 48;
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 3/4; Mill Diameter (Decimal Inch): 0.7500; Connection Type: E20; Overall Length (Decimal Inch): 1.6024; Centercutting: Yes; Corner Radius (Decimal Inch): 0.0300; Minimum Helix Angle: 48;
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3154; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3287; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3024; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2926; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Polyimide Film Tape: 5″ Wide, 100' x 1 mil Thick Non-Adhesive, -40 to 450 ° F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3157; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3156; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3023; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.4375″ Dia, 3 Flute, Solid Carbide 4″ OAL, 7/16″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3289; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Straight, 3/4-14
• Ball End Mill: 0.5″ Dia, 2″ LOC, 5 Flute, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2925; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Straight, 3/4-14
• Pipe Thread Plug Gage: Straight, 1-11-1/2 Handle Size 5
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3027; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Straight, 1-11-1/2 Handle Size 5
• Square End Mill: 1/2'' Dia, 1-1/2'' LOC, 1/2'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3230; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Spiral Flute Tap: M20 x 1.00, MF, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D6, Series C0503000
• Jobber Length Drill Bit: 85 °, Micron Grain Carbide Diamond Finish, 3.23″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series UDR5P1AA
• Spiral Flute Tap: M14 x 1.25, MF, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D5, Series C0503000
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3288; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3022; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3270; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2924; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Polyimide Film Tape: 12″ Wide, 1' x 3.3 mil Thick Acrylic Adhesive, -40 to 450 ° F
• Turning Insert: DCGT2151FNA2CB1, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Guhring Roughing End Mill for High Tensile Materials 14.00mm Diameter 14.0mm Shank 26.00mm Length of Cut 83mm Overall
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3155; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: DCGT2151FNA2CB2, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series DCGT
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3207; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3338; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Duct Tape: 4″ Wide, 3.5 mil Thick, Aluminum Foil Silicone Adhesive, 20 lb/in Tensile Strength
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3205; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5013; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3204; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Boring Bar: 0.49″ Min Bore, 3″ Max Depth, Right Hand Cut, Solid Carbide 1/2″ Shank Dia, 6″ OAL, 0.006″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3337; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5019; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3339; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5017; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3333; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5018; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Square End Mill: 28mm LOC, 14mm Shank Dia, 100mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6480
• Catches; Type: Sealed Magnetic Catch with Switch; Length (mm): 74.00; Height (mm): 14.0000; Width (mm): 30.00; Finish/Coating: Black; Strike Length: 82.00; Strike Width: 16.00; Magnetic Force: 6.6; Minimum Order Quantity: Polycarbonate; Material: Polycarb
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3332; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0571; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3203; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5022; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3210; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Square End Mill: 5/8'' Dia, 1-5/8'' LOC, 5/8'' Shank Dia, 3-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 38 ° Helix, Centercutting, RH Cut, RH Flute
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5023; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3336; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Duct Tape: 6″ Wide, 7.2 mil Thick, Aluminum Foil Acrylic Adhesive, 59 lb/in Tensile Strength
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3202; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Boring Bar: 5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, CBN 5 mm Shank Dia, 58.10 mm OAL, 0.04 mm Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3220; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2108
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3335; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5027; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: 7/16-14, UNC, 3 Flute, 2-3 P, 2B Class of Fit, HSS-E, TICN Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H5
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3201; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5024; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 12; Length (yd): 5.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 46
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 6; Length (yd): 5.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 468
• Spiral Flute Tap: 5/8-11, UNC, 4 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 4.331″ OAL, Right Hand Flute, Right Hand Thread, H6, Series CU99C400
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 4.5700; Material: Steel
• Screw Machine Length Drill Bit: 0.429″ Dia, 124 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1249; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Screw Machine Length Drill Bit: 0.4095″ Dia, 124 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Helical & Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Screw Machine Length Drill Bit: 0.4062″ Dia, 124 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Helical & Parabolic Flute, Straight-Cylindrical Shank, Series 131N
• Warehouse Labels, Magnetic Rolls, 1″ x 50', Blue, 1/Case
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5071; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Turning Insert: VCGW333FN_A5 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0472″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Jobber Length Drill Bit: 0.4646″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.4724″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Electromagnet Lock Accessories; Type: Wireless Transmitter & Receiver; For Use With: Wireless Activation Doors; Material: Plastic; Material: Plastic; For Use With: Wireless Activation Doors; Type: Wireless Transmitter & Receiver; Accessory Type: Wireless
• Spiral Flute Tap: 3/4-16, UNF, 4 Flute, Modified Bottoming, VC-10, V Finish 0.799″ Thread Length, 4.33″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 317
• Jobber Length Drill Bit: 0.4409″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.25″ Dia, 0.375″ LOC, 2 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Jobber Length Drill Bit: 0.4567″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: 3/4-10, UNC, 4 Flute, Modified Bottoming, VC-10, V Finish 0.799″ Thread Length, 4.92″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 317
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5078; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Jobber Length Drill Bit: 0.4688″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.65″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5076; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Jobber Length Drill Bit: 0.4488″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: 3/4-16, UNF, 4 Flute, Modified Bottoming, VC-10, V Finish 0.799″ Thread Length, 4.33″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 317
• Jobber Length Drill Bit: 0.437″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: 3/4-10, UNC, 4 Flute, Modified Bottoming, VC-10, V Finish 0.799″ Thread Length, 4.92″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 317
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 2; Length (yd): 60.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 300.000; Color: Clear; Liner Material: Kraft Paper; Series: 94
• Jobber Length Drill Bit: 0.4375″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.65″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5084; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Jobber Length Drill Bit: 0.4688″ Dia, 120 °, Cobalt V Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1700
• Jobber Length Drill Bit: 0.4606″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 36.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Dec
• UHMW Film Tape: 1″ Wide, 36 yd Long, 10 mil Thick 80 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5081; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Jobber Length Drill Bit: 0.4685″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 1; Mill Diameter (Decimal Inch): 1.0000; Length of Cut (Inch): 1.0080; Connection Type: E25; Overall Length (Inch): 1.9530; Flute Type: Spiral; Material Grade: WJ30TF; Helix Angle: 50; C
• Jobber Length Drill Bit: 0.4527″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 1; Mill Diameter (Decimal Inch): 1.0000; Length of Cut (Inch): 1.0080; Connection Type: E25; Overall Length (Inch): 1.9530; Flute Type: Spiral; Material Grade: WJ30TF; Helix Angle: 50; C
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 4 HSK-125; Type: Shelf; Type: Shelf
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5082; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• White Double-Sided Foam Tape: 3/4″ Wide, 25 mil Thick, Acrylic Adhesive
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 4 HSK-A/C 100; Type: Shelf; Type: Shelf
• Electromagnet Lock Accessories; Type: Wire Harness; For Use With: McKinney QC Concealed Circuit Electric Hinges; Material: Plastic; Material: Plastic; For Use With: McKinney QC Concealed Circuit Electric Hinges; Type: Wire Harness; Accessory Type: Wire Ha
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 4 HSK-A/C/E 63
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 4 SK50/BT50/CAT50
• 8.3mm Head Diam, 15/64″ Shank Diam, 90° Solid Carbide Countersink 1-3/4″ OAL, Single End, Straight Shank, Right Hand Cut
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 4 SK40/BT40/CAT40
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 12 SK40/BT40/CAT40
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 12 SK30/BT30/CAT30
• Square End Mill: 5/8'' Dia, 1-1/4'' LOC, 5/8'' Shank Dia, 4'' OAL, 6 Flutes, Solid Carbide Single End, 50 ° Helix, RH Cut, RH Flute
• Square End Mill: 5/8'' Dia, 1.624'' LOC, 5/8'' Shank Dia, 4'' OAL, 6 Flutes, Solid Carbide Single End, 50 ° Helix, RH Cut, RH Flute
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5087; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Chamfer End Mill: 0.75″ Dia, 0.9375″ LOC, 4 Flute, 0.015″ Chamfer Width, Solid Carbide 3″ OAL, 3/4″ Shank Dia, AlTiN Coated, Centercutting
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5051; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 12 HSK-A/C/E 63
• Dial Calipers; Accuracy (Decimal Inch): +/-.001; Maximum Measurement (Inch): 6; Jaw Length (mm): 40.00; Measures: Outside Measurement; Step Measurement; Inside Measurement; Depth Measurement; Range Per Revolution (Decimal Inch): 0.100; Caliper Material: S
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5052; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5055; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Chamfer Mill: 10 mm Dia, 6 Flutes, Solid Carbide 100 mm OAL, 6 mm Shank Dia, TiAlN Coated
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5056; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 5 F80 Makino
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5053; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 12 PSC 50
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5054; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 12 PSC 32
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5059; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 12 PSC 40
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf to holf 3 Balancing adapter
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 18; Width (Inch): 0.19; Color: Red
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5058; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 16 HSK-A/C/E 32; Type: Shelf; Type: Shelf
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 5 HSK-A/C 100; Type: Shelf; Type: Shelf
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 18; Width (Inch): 0.19; Color: Gray
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Shelf for 4 compartment vertical cabinet to hold 5 HSK-A/C/E 80; Type: Shelf; Type: Shelf
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 17; Width (Inch): 0.5; Color: Natural
• Ball End Mill: 0.1969″ Dia, 0.5118″ LOC, 2 Flute, Solid Carbide Uncoated
• Ball End Mill: 0.1181″ Dia, 0.315″ LOC, 2 Flute, Solid Carbide Uncoated
• Ball End Mill: 0.1575″ Dia, 0.4331″ LOC, 2 Flute, Solid Carbide Uncoated
• Corner Chamfer End Mill: 0.0787″ Dia, 0.2756″ LOC, 3 Flute, 0.0008″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Corner Chamfer End Mill: 0.0787″ Dia, 0.2756″ LOC, 3 Flute, 0.0008″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 4 Flute, 0.0118″ Chamfer Width, Solid Carbide 2.87 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5067; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Chamfer End Mill: 0.1969″ Dia, 0.5118″ LOC, 3 Flute, 0.002″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Corner Chamfer End Mill: 0.1969″ Dia, 0.5118″ LOC, 3 Flute, 0.002″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Ball End Mill: 0.0984″ Dia, 0.2756″ LOC, 2 Flute, Solid Carbide Uncoated
• Ball End Mill: 0.126″ Dia, 0.315″ LOC, 2 Flute, Solid Carbide Uncoated
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5065; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Chamfer End Mill: 0.1575″ Dia, 0.4331″ LOC, 3 Flute, 0.0016″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• 5/8″ Diam 6-Flute 35/38° Solid Carbide 0.06″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 1-1/4″ LOC, 3-1/2″ OAL, 5/8″ Shank Diam, Centercutting, Standard Length
• Corner Chamfer End Mill: 0.1575″ Dia, 0.4331″ LOC, 3 Flute, 0.0016″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• 5/8″ Diam 6-Flute 35/38° Solid Carbide 0.06″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 1-1/4″ LOC, 3-1/2″ OAL, 5/8″ Shank Diam, Centercutting, Standard Length