Products

• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 4.500; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 4.500; Number of Walls: 0
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 4.500; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 4.500; Number of Walls: 0
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.4013; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: CNMG433FM KCP25C, Carbide
• Threaded Ring Gage: 1-7/16-12 Thread, UNF, Class 2A, Go & No Go
• Wire Shelving; Shelving Type: Mobile Wire Shelving; Shelf Type: Adjustable; Adjustment Type: Split Sleeve; Shelf Capacity: 800; Mobility: Mobile; Depth (Inch): 24; Height (Inch): 74; Width (Inch): 36; Wire Shelving Material: Steel
• Threaded Ring Gage: 1-7/16-12 Thread, UNF, Class 3A, Go & No Go
• Wire Shelving; Shelving Type: Mobile Upright with Polymer Mat; Shelf Type: Adjustable; Adjustment Type: Split Sleeve; Shelf Capacity: 800; Mobility: Mobile; Depth (Inch): 18; Height (Inch): 74; Width (Inch): 48; Wire Shelving Material: Steel
• Wire Shelving; Shelving Type: Mobile Wire Shelving; Shelf Type: Adjustable; Adjustment Type: Split Sleeve; Shelf Capacity: 600; Mobility: Mobile; Depth (Inch): 24; Height (Inch): 74; Width (Inch): 60; Wire Shelving Material: Steel
• Truck Ramps; For Use With: Trailers; Length (Inch): 144; Width (Inch): 16; Load Capacity (Lb.): 12000.000; Material: Aluminum; Color: Silver; Finish Coating: None
• Metal Tube; Tube Type: Welded; Material: Stainless Steel; Outside Diameter (Inch): 1/2; Inside Diameter (Decimal Inch): 0.4590
• Paints; 1GAL EXT FLAT XTRA WHT ACRYLIC LATEX
• Turning Insert: CCMH21.50.5MV MP3025, Cermet
• Ball End Mill: 2 Flute(s), Solid Carbide
• Jobber Length Drill Bit: 0.7874″ Dia, 147 °, Solid Carbide TiAlSiN, TiSiN Finish, 6.0236″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Round Linear Shafting; Shaft Type: Standard; Diameter (mm): 16.0000; Diameter (Decimal Inch): 0.6250; Diameter (Inch, Fraction): 5/8; Shaft Diameter: 16.000; Material: Steel; Minimum Diameter Tolerance: 15.989 mm
• Pipe Thread Plug Gage: Tapered, 3-8
• Adjustable Stop Countersink Cage
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2498; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Micro Drill Bit: 0.0135" Dia, 130 deg, Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.5142; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Adjustable Stop Countersink Cage
• Door Damper: 12.3″ Closer Body Length Aluminum Finish, Non-Handed
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-3/8-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Material:
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-3/8-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Material:
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Office Cubicle Partitions; Office Cubicle Partition Type: Modular Wall Room Divider; Color: Gray, Black, Frosted; Material: Aluminum; Mount Type: Freestanding; Height (Inch): 70; Width (Inch): 53; Thickness (Inch): 1-3/4
• B-33 Engine Degreaser: 18.00, Aerosol Can
• Automotive Fuel System & Restoration Kits; Type: B-12 Chemtool Fuel Injector Cleaner For Trucks & SUV's; Contents: 21 oz Pour Can; Number Of Pieces: 1; Container Type: Can
• Brake Parts Cleaner (Non-Chlorinated): 14.00, Aerosol Can
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Tire Puncture Sealant; Compatible Tire Type: Car; Sealant Type: Heavy-Duty Tire Sealant, Premium Tire Sealant, Liquid Ballast, Bicycle Tire Sealant, Non-Flammable Instant Tire Repair, Liquid Ballast Tire Sealant; Container Size: 32 oz; Container Type: Bot
• Power Steering Fluid; Type: Power Steering Conditioner & Leak Stop; Container Size: 1 gal; Container Type: Plastic Bottle; Performance Rating: Domestic/Import Power Steering Systems; Color: Yellow; Flammability: Non-Flammable
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Turning Insert: NPDCGW21.51-SE2 MB4120, Cubic Boron Nitride (CBN)
• Automotive Penetrants & Lubricants; Product Type: Penetrant & Lubricant, Penetrating Oil, Lubricant; Container Type: Aerosol
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Compression Tube Cap Insert: 25" Tube ID
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2973; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• B-12 Chemtool Carburetor Cleaner - Consumer Size: 10.00, Aerosol Can
• Engine Additives; Engine Additive Type: Oil Change Flush; Container Size: 16 fl oz; Color: Yellow; Boiling Point: 300 - 1400 F
• Compression Tube Tube Nut: 14" Tube ID
• Electromagnet Locks; Average Magnetic Pull (Lb.): 1200.000; 1200.0 lb; Timer: No; LED: Yes; Finish: Aluminum; Features: Bond Sensor, Door Status Sensor; Finish/Coating: Aluminum; Led Included: Yes; Average Magnetic Pull: 1200.0 lb
• Threaded Ring Gage: 1-3/8-18 Thread, UNEF, Class 2A, Go & No Go
• Garden Hose Fittings & Repair Kits; Kit Type: Long Shank Complete Hose Coupling; Connector Type: Male, Female; Compatible Hose Diameter: 0.75; Thread Size (Inch): 3/4 x 3/4; Thread Type: GHT; Material: Stainless Steel; Inside Diameter (Inch): 3/4; Color:
• Ring Pipe Thread Gages; Thread Size: 3/8-19; Classification: System A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: BSPP; Additional Information: Set: 2 Pc.; Go ™No ™Go: Go/No Go; Thread Size (Inch): 3/8-19
• TIG Torch Nozzles; Nozzle Size: #8; For Use With: 20H-320; PTW-20; PTA-9; Standards: 53N615
• Threaded Ring Gage: 1-3/8-18 Thread, UNEF, Class 3A, Go & No Go
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9611; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6755; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/2-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material:
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/2-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material:
• Ring Pipe Thread Gages; Thread Size: 2-1/2-8; Classification: L2; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: ANPT; Additional Information: Specification Met: SAE AS71051; Thread Size (Inch): 2-1/2-8
• Disposable Coveralls: Particle Protection Protection, Size X-Large, Tyvek 400 SFR, Storm Flap, Zipper & Serged Closure
• Disposable Coveralls: Particle Protection Protection, Size Large, Tyvek 400 SFR, Storm Flap, Zipper & Serged Closure
• Stationary Work Bench: 24″ Wide, 54″ Deep, 37″ High
• Stationary Work Bench: 24″ Wide, 54″ Deep, 30″ High
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 48; Control Circuit Voltage: 48 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 3750; Socket Connection Type: Flat Pin; Amperage: 15; Number Of Pins: 14
• Square End Mill: 1'' Dia, 2'' LOC, 1'' Shank Dia, 6'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6485
• Grooving Insert: A4G 6 GUP KCU10B, Carbide
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 1.500; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 0; Post Consumer Recycled Content
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 1.500; Number of Walls: 0
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 1.500; Number of Walls: 0
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 230; Control Circuit Voltage: 230 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 1500; Socket Connection Type: Flat Pin; Amperage: 6; Number Of Pins: 14
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 230; Control Circuit Voltage: 230 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Circular Pin Terminals; Amperage: 10; Numb
• Spiral Band: Aluminum Oxide, 180 Grit, Very Fine Grade
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 110; Control Circuit Voltage: 110 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 3750; Socket Connection Type: Flat Pin; Amperage: 15; Number Of Pins: 14
• Utility Utility Cart: 36" Long, 36" Wide, Steel, 600 lb Capacity, Black
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9622; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• CNC Storage Accessories; For Use With: Tool Holder Cart; Description: 8 pcs. Tool holder carrier for tool holder rack with recess to hold 4 BT40 per carrier
• 30 x 68″ Aluminum Shadow Board 1 Panel, Green/White
• Ball End Mill: 3.00 mm Dia, 2.30 mm LOC, 2 Flute, Solid Carbide
• 30 x 68″ Aluminum Shadow Board 1 Panel, Yellow/White
• 30 x 68″ Aluminum Shadow Board 1 Panel, Red/Black
• 30 x 68″ Aluminum Shadow Board 1 Panel, Green/Black
• Corner Radius End Mill: 3/8″ Dia, 1-7/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, Helix, DG Diamond Coated, Corner Radius End, Centercutting, Series 7470
• Spiral Flute Tap: 1-5/8-8, UN, 5 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish Right Hand Flute, Right Hand Thread, H5, Series CU50C310
• Ball End Mill: 0.625″ Dia, 0.875″ LOC, 2 Flute, Polycrystalline Diamond 3-1/2″ OAL, 5/8″ Shank Dia, 0 ° Helix, Polycrystaline Diamond Coated, Single End, Series DEB
• Corner Radius End Mill: 3/8″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, Helix, DG Diamond Coated, Corner Radius End, Centercutting, Series 7470
• Corner Radius End Mill: 3/8″ Dia, 3/8″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 6″ OAL, Helix, DG Diamond Coated, Corner Radius End, Centercutting, Series 7470
• Engine Additives; Engine Additive Type: High-Mileage Oil System Rejuvenator; Container Size: 15 fl oz; Color: Yellow; Boiling Point: 480 - 1100 F
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 60; Control Circuit Voltage: 60 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.12; Maximum Power Rating (VA): 1500; Socket Connection Type: Flat Pin; Amperage: 6; Number Of Pins: 8
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Single or Multiple Components Within an Access Control System; Material: Steel; Material: Steel; For Use With: Single or Multiple Components Within an Access Control System; Type: Power Sup
• Vertical Bandsaw: Variable Speed Pulley Drive, 6″ Height Capacity 12″ Table Length, 11-3/4″ Table Width
• Jointers; Maximum Cutting Width (Inch): 6; Maximum Cutting Depth (Inch): 3/8; Cutter Head Speed (RPM): 3600.00; Table Depth (Inch): 7 (Out Feed Table); 9-1/2 (In Feed Table); Number of Cutting Knives: 4; Fence Length (Inch): 26-3/4; Fence Thickness (Inch)
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 1/4″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SAP-NB
• Turning Insert: CCGT21.50.5MRSN MS6015, Carbide
• Paints; 1GAL WHT SEMI GLOSS DIRECT TO METAL ENAMEL
• Mobile Battery Lift Table: 1,100 lb Capacity, 15-1/2 to 35″ Lift Height, 19-3/4″ Platform Width, 32-1/2″ Platform Length 15-1/2″ to 35″ Lift Height, 32-1/2″ Platform Length x 19-3/4″ Platform Width
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 1.1; Control Circuit Voltage: 24 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.05; Maximum Power Rating (VA): 1250; Socket Connection Type: Faston Pin; Amperage: 5; Number Of Pins: 8
• Turning Insert: VCGT332FN_A2 CTDMD05, Polycrystalline Diamond Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• FEP Film Tape: 3″ Wide, 36 yd Long, 3.5 mil Thick 8 Lb/In Tensile Strength, Silicone Adhesive, -100 to 400 ° F
• Combo Horizontal & Vertical Bandsaw 0.33 hp, 110/220 Volts
• Adjustable Stop Countersink Cage
• Rotary Drill/Hammer Drill Bits; Drill Bit Size (Inch): 3/16; Shank Type: Hex; Drill Bit Material: Carbide-Tipped; Shank Diameter (Inch): 1/4
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7076; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 1/2″ Radius, 4-1/4″ Cut Diam, 1″ Circle Diam, 9/16″ Cut Width, 1-1/4″ Arbor Concave Radius Cutter High Speed Steel, TiN Finish, 1-9/16″ OAL, 10 Teeth, Form Relieved
• Electromagnet Lock Accessories; Type: Electronic Horn; For Use With: Interior Applications; Material: Plastic; Material: Plastic; For Use With: Interior Applications; Type: Electronic Horn; Accessory Type: Electronic Horn; Type: Electronic Horn
• 60-12000FPM 8.3L XENON STROBOSCOPE&EU PLUG - Stroboscope Universal Power; EU connector
• Deep Standard Ratchet&Socket Set Socket Set: 36 Pc, 0.25 to 1" Socket
• SafeGuard 360 Certified HEPA Filter Cartridge, 1 gal Capacity
• 60-12000FPM 8.3L XENON STROBOSCOPE Stroboscope Universal Power
• Polytetrafluroethylene Film Tape: 3/4″ Wide, 36 yd Long, 6.7 mil Thick 40 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Jobber Length Drill Bit: 45 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 45 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Precision Compression Spring: 0.8200" OD, 2-1/4" Free Length
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8024; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Jobber Length Drill Bit: 0.748″ Dia, 140 °, Solid Carbide TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.20 mm Dia, 0.15 mm LOC, 2 Flute, Solid Carbide
• Corner Radius End Mill: 0.6299″ Dia, 5 Flutes, Solid Carbide 25 ° Helix, DLC Coated, Centercutting End, Series 2963
• Corner Radius End Mill: 0.6299″ Dia, 2 Flutes, Solid Carbide 25 ° Helix, DLC Coated, Centercutting End, Series 2963
• Corner Radius End Mill: 0.6299″ Dia, 2 Flutes, Solid Carbide 25 ° Helix, DLC Coated, Centercutting End, Series 2963
• Square End Mill: 1'' Dia, 4'' LOC, 1'' Shank Dia, 7'' OAL, 5 Flutes, Solid Carbide Single End, Duarise Finish, 0 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Powder Actuated Pins & Threaded Studs; Type: Drive Pin; Shank Length (Inch): 3/4; Shank Diameter (Decimal Inch): 0.1450; Head Diameter (Decimal Inch): 0.3000; Material: Steel
• Grooving Insert: GBA 43 , PR2025, Carbide
• Borescopes & Borescope Kits; Kit Type: Video Borescope; Magnification: 0x; Field Of View: 87.1 degree; Scope Diameter: 10 mm; Scope Length: 82.02 ft; Adjustable Focus: No
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Jobber Length Drill Bit: 0.75″ Dia, 85 °, Micron Grain Carbide Diamond Finish, 6.02″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series UDR5P1AA
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 1.1; Control Circuit Voltage: 24 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.5; Maximum Power Rating (VA): 2500; Socket Connection Type: Faston Pin; Amperage: 10; Number Of Pins: 5
• Polytetrafluroethylene Film Tape: 3″ Wide, 36 yd Long, 3.7 mil Thick 22 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Milling Machine Power Feed: 140 in/lb Max Peak Torque, 100 in/lb Max Continuous Torque 37″ Max Feed Rate per min, 37″ Traversing Speed per min
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6439; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ring Pipe Thread Gages; Thread Size: 2-11-1/2; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Pitch Diameter: 2.2944-2.2882; Go ™No ™Go: Go; Specification Met:
• Ring Pipe Thread Gages; Thread Size: 2-11-1/2; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Pitch Diameter: 2.2944-2.2882; Go ™No ™Go: No Go; Specification M
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 1.1; Control Circuit Voltage: 120 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.5; Maximum Power Rating (VA): 2500; Socket Connection Type: Faston Pin; Amperage: 10; Number Of Pins: 5
• Electromagnet Locks; Average Magnetic Pull (Lb.): 650.0 lb; 650.000; Timer: No; LED: No; Finish: Aluminum; Features: Door Status Switch; Finish/Coating: Aluminum; Led Included: No; Average Magnetic Pull: 650.0 lb
• Glass Cloth Tape; Width (Inch): 6; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 5.0000; Tensile Strength (Lb./Inch): 120.00; Maximum Operating Temperature (F): 500.000
• Ring Pipe Thread Gages; Thread Size: 1-1/2-11-1/2; Classification: L2; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: ANPT; Additional Information: Specification Met: SAE AS71051; Thread Size (Inch): 1-1/2-11-
• Cut-Resistant Gloves: Tuff N Lite GL 668, Size Medium, ANSI Cut A6, ANSI Puncture 0, Rubber, HPPE
• Ring Pipe Thread Gages; Thread Size: 3-8; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Pitch Diameter: 3.3862-3.3786; Go ™No ™Go: Go; Handle: 7; Specificatio
• Ring Pipe Thread Gages; Thread Size: 3-8; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Pitch Diameter: 3.3862-3.3786; Handle: 7; Go ™No ™Go: No Go; Specifica
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Electric Strikes; Electro Magnetic Locks; Material: Steel; Material: Steel; For Use With: Electric Strikes; Electro Magnetic Locks; Type: Power Supply; Accessory Type: Power Supply; Type: P
• Airflow Meters & Thermo-Anemometers; Maximum Air Velocity ft/min (Feet): 5906; Min Air Velocity ft/min (Feet): 79; Resolution: 0.1 m/s, km/h, mph, knot, 1 fpm; Maximum Measuring Range (Deg F): 122.000; Measures or Tests: Temperature; Air Velocity; Accurac
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 1.1; Control Circuit Voltage: 24 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.5; Maximum Power Rating (VA): 2500; Socket Connection Type: Faston Pin; Amperage: 10; Number Of Pins: 5
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-7/16-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Addi
• Ring Pipe Thread Gages; Thread Size: 1-11-1/2; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Handle: 5; Pitch Diameter: 1.2369-1.2311; Set: 2 Pc.; Specificati
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-7/16-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Addi
• Knob Locksets; Type: Dormitory; Tumbler; Door Thickness: 1 3/4 - 2 1/8; Back Set: 2-3/4; Material: Brass; Finish/Coating: Satin Chrome; Antimicrobial Coated; Compatible Door Thickness: 1 3/4 - 2 1/8; Material: Brass; Design/Shape: Ball Knob; Additional In
• Knob Locksets; Type: Dormitory; Tumbler; Door Thickness: 1 3/4 - 2 1/8; Back Set: 2-3/4; Material: Brass; Finish/Coating: Satin Chrome; Antimicrobial Coated; Compatible Door Thickness: 1 3/4 - 2 1/8; Material: Brass; Design/Shape: Ball Knob; Additional In
• Knob Locksets; Type: Entrance; Tumbler; Door Thickness: 1 3/4 - 2 1/8; Back Set: 2-3/4; Material: Brass; Finish/Coating: Satin Chrome; Antimicrobial Coated; Compatible Door Thickness: 1 3/4 - 2 1/8; Material: Brass; Design/Shape: Ball Knob; Additional Inf
• Knob Locksets; Type: Tumbler; Classroom; Door Thickness: 1 3/4 - 2 1/8; Back Set: 2-3/4; Material: Brass; Finish/Coating: Satin Chrome; Antimicrobial Coated; Compatible Door Thickness: 1 3/4 - 2 1/8; Material: Brass; Design/Shape: Ball Knob; Additional In
• Disposable Coveralls: Particle Protection Protection, Size Medium, Tyvek 400 SFR, Storm Flap, Zipper & Serged Closure
• Disposable Coveralls: Particle Protection Protection, Size 7X-Large, Tyvek 400 SFR, Storm Flap, Zipper & Serged Closure
• Disposable Coveralls: Particle Protection Protection, Size 6X-Large, Tyvek 400 SFR, Storm Flap, Zipper & Serged Closure
• Disposable Coveralls: Particle Protection Protection, Size 5X-Large, Tyvek 400 SFR, Storm Flap, Zipper & Serged Closure
• Disposable Coveralls: Particle Protection Protection, Size 4X-Large, Tyvek 400 SFR, Storm Flap, Zipper & Serged Closure
• Disposable Coveralls: Particle Protection Protection, Size 3X-Large, Tyvek 400 SFR, Storm Flap, Zipper & Serged Closure
• Corner Radius End Mill Head: 1″ Dia, 3″ LOC, 7 Flutes Solid Carbide, nano-A Coated, Series 6998
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 60; Control Circuit Voltage: 60 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Circular Pin Terminals; Amperage: 10; Number
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 48; Control Circuit Voltage: 48 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Flat Pin; Amperage: 10; Number Of Pins: 14
• Profiling Insert: NPR51 KCP25C
• Hydraulic Filter Element: 10 µ
• Ring Pipe Thread Gages; Thread Size: 1/4-19; Classification: System A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: BSPP; Additional Information: Set: 2 Pc.; Go ™No ™Go: Go/No Go; Thread Size (Inch): 1/4-19
• Guhring Roughing End Mill for Aluminum 20.00mm Diameter 20.0mm Shank 38.00mm Length of Cut 104mm Overall with Coolant Thru
• Jobber Length Drill Bit: 0.5000″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Modular Tool Holding System Adapter: 3.1102″ Projection, Through Coolant
• Deburring Wheel: 2-1/2" Dia, 1/8" Face Width, 1/4" Hole, Aluminum Oxide
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Turning Insert: TCMT32.52FP6 WPP20G, Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8068; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Abrasive Belt: 3/4" Wide, 20-1/2" OAL, Aluminum Oxide
• Turning Insert: CNMG433MM MC7025, Carbide
• 1/2″ x 2-1/4″ 4FL EXOCARB DG-EML long neck corner radius carbide end mill engineered to achieve high-efficiency and high precision milling in high-hardness steels.
• Electromagnet Locks; Average Magnetic Pull (Lb.): 1200.000; 1200.0 lb; Timer: No; LED: No; Finish: Aluminum; Finish/Coating: Aluminum; Led Included: No; Average Magnetic Pull: 1200.0 lb
• Single Point Threading Tools; Thread Type: Internal, External; Material: Solid Carbide; Profile Angle: 60; Threading Diameter (Decimal Inch): 0.2420; Cutting Depth (Decimal Inch): 1.0000; Maximum Threads Per Inch: 24
• Ball End Mill: 2.00 mm Dia, 2.00 mm LOC, 2 Flute, Solid Carbide
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 4.500; Number of Walls: 0
• Corner Radius End Mill: 3/16" Dia, 3/4" LOC, 0.0100" Radius, 3 Flute, Solid Carbide
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 4.500; Number of Walls: 0
• Turning Insert: NP-DNGA432-TA2 MB8130, Cubic Boron Nitride (CBN)
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 4.500; Number of Walls: 0
• Woodruff Keyseat Cutter: 24.00 mm Cut Dia, 3.00 mm Cut Width, 12.70 mm Shank Dia, Straight Tooth
• Jobber Length Drill Bit: 0.1772″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-08-A1
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.03″ Radius, 4 Flutes 6″ OAL, 1″ Shank Dia, 50 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SR4F
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 1.1; Control Circuit Voltage: 24 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.5; Maximum Power Rating (VA): 2500; Socket Connection Type: Faston Pin; Amperage: 10; Number Of Pins: 5
• Pry Bars; Prybar Type: Claw Bar; End Angle: Gooseneck; End Style: Curved, Claw; Material: Steel; Bar Shape: Flat
• Electromagnet Locks; Average Magnetic Pull (Lb.): 1600.0 lb; 1600.000; Length (Inch): 11 in; Timer: No; LED: No; Finish: Aluminum; Features: Door Position Switch; Finish/Coating: Aluminum; Overall Length: 11 in; Led Included: No; Average Magnetic Pull: 16
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Compression Tube Straight: 3/8-18, M22x1.5, 15" Tube ID, 15 mm Tube OD, Tube OD
• Compression Tube Straight: 1/4-19, M16x1.5, 10" Tube ID, 10 mm Tube OD, Tube OD
• Square End Mill: 4 Flute, Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6681; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball End Mill: 1.20 mm Dia, 3.00 mm LOC, 2 Flute, Solid Carbide
• Ball End Mill: 1.00 mm Dia, 0.75 mm LOC, 2 Flute, Solid Carbide
• Turning Insert: NP-CPGB2.51.51-GS2, Cubic Boron Nitride (CBN)
• Polyimide Film Tape: 6″ Wide, 36 yd Long, 3 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 311 ° F
• Vibration Isolators; Isolator Type: Plate/Plate; Insert Material: Stainless Steel; Isolator Material: Natural Rubber; Maximum Load Capacity: 3460.00 N; Top Diameter: 50.00; Bottom Diameter: 50; Thread Size: M10x1.5; Overall Width: 50 mm
• Pipe Thread Plug Gage: Tapered, 1-1/4-11-1/2, Double End
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 24; Control Circuit Voltage: 24 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Flat Pin; Amperage: 10; Number Of Pins: 14
• Turning Insert: NP-TNGA333-TA3 MB8130, Cubic Boron Nitride (CBN)
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-3/8-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material:
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-3/8-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material:
• Chalk Line Reels; Type: Compact; Line Length: 100 ft; Chalk Capacity: 4; Case Color: Silver; Line Material: Polymer; Line Structure: Twisted; Housing Material: Aluminum
• Chalk Line Reels; Type: Compact; Line Length: 100 ft; Chalk Capacity: 4; Chalk Color: Red; Case Color: Silver; Line Material: Polymer; Line Structure: Twisted; Housing Material: Aluminum
• Hand Hex & Torx Bit Sockets; Hex Size (mm): 9.520; Hex Size (Inch): 3/8
• Electronic Inside Micrometer: 2.5 to 3″ Range 0.00005″ Resolution, 0.00020″ Accuracy, Micro USB Output
• Electronic Inside Micrometer: 2 to 2.5″ Range, IP54 0.00005″ Resolution, 0.00020″ Accuracy, Micro USB Output
• Stationary Work Bench: 24″ Wide, 48″ Deep, 30″ High
• Helmet Cooling Liner: Size Universal, Blue, Hook & Loop Closure
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 12; Control Circuit Voltage: 12 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.12; Maximum Power Rating (VA): 1500; Socket Connection Type: Flat Pin; Amperage: 6; Number Of Pins: 8
• Stationary Work Bench: 24″ Wide, 48″ Deep, 37″ High
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 24; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 5.00; Maximum Torque (Ft/Lb): 36.00; Overall Length (Decimal Inch): 12.4000; Head Type: Interchageable; Head Shape: Rect
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7723; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Nm; Minimum Torque (Nm): 8.000; Maximum Torque (Nm): 40.000; Overall Length (Decimal Inch): 8.8000; Head Type: Interchageable; Head Shape: Rectangular; Insulate
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 110; Control Circuit Voltage: 110 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Flat Pin; Amperage: 10; Number Of Pins: 14
• Nail & Framing Hammers; Claw Style: Curved; Head Weight (Oz): 12; Head Material: Steel; Handle Material: Steel; Face Surface: Smooth
• Ball End Mill: 0.30 mm Dia, 0.24 mm LOC, 2 Flute, Solid Carbide
• Jobber Length Drill Bit: 0.3228″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-08-A1
• Turning Insert: CCMT21.51LM MC7025, Carbide
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 6.000; Number of Walls: 0
• Turning Insert: DCGW32.51FLA3Q CTDMD05, Polycrystalline Diamond Left Hand, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 6.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 6.000; Number of Walls: 0
• Electromagnet Lock Accessories; Type: Weatherized Door Propped Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Weatherized Door Propped Alarm; Accessory Type: Weatherized D
• Mobile Battery Lift Table: 1,000 lb Capacity, 30 to 47-1/2″ Lift Height, 18″ Platform Width, 36″ Platform Length 30″ to 47-1/2″ Lift Height, 36″ Platform Length x 18″ Platform Width
• 321 Stainless Steel Round Rod: 2-1/4" Dia, 6' Long
• Ball End Mill: 1″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 1″ Shank Dia, Variable ° Helix, AlCrN Coated, Single End
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Polytetrafluroethylene Film Tape: 6″ Wide, 36 yd Long, 3.7 mil Thick 22 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Laser & Ultrasonic Distance Finders; Minimum Distance: 82; Maximum Distance (Meters): 262; Maximum Distance (Feet): 262; Maximum Distance: 262; Distance Meter Functions: Align; Plumb; Level; Accuracy: +/-1/8 ™; Minimum Distance (Feet): 82; Accuracy (Decim
• Electromagnet Lock Accessories; Type: Proximity Card Reader; For Use With: Access Control Panel; Material: Polycarbonate; Material: Polycarbonate; For Use With: Access Control Panel; Type: Proximity Card Reader; Accessory Type: Proximity Card Reader; Type
• Locker:
• Electromagnet Lock Accessories; Type: Proximity Card Reader; For Use With: Access Control Panel; Material: Polycarbonate; Material: Polycarbonate; For Use With: Access Control Panel; Type: Proximity Card Reader; Accessory Type: Proximity Card Reader; Type
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-14; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNS; Handle Size: 4; Material: High
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 110; Control Circuit Voltage: 110 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Flat Pin; Amperage: 10; Number Of Pins: 14
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-14; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNS; Handle Size: 4; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material: High
• Ring Pipe Thread Gages; Thread Size: 3-8; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Pitch Diameter: 3.3862-3.3786; Set: 2 Pc.; Handle: 7; Specification Me
• Multi-Purpose Fence & Net; Type: Loading Dock Safety Netting; Mesh Size: 6 in; Color: Safety Orange; Material: Polyester
• Guhring Roughing End Mill for High Tensile Materials 25.00mm Diameter 25.0mm Shank 45.00mm Length of Cut 121mm Overall
• Spiral Flute Tap: 2 to 4-1/2, UNC, 5 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 9.843″ OAL, Right Hand Flute, Right Hand Thread, H9, Series CU50C300
• Jobber Length Drill Bit: 0.6250″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Electric Strikes; Electro Magnetic Locks; Material: Steel; Material: Steel; For Use With: Electric Strikes; Electro Magnetic Locks; Type: Power Supply; Accessory Type: Power Supply; Type: P
• FlexC 42 Quick-Change Collet 30mm Hex Serrated
• Milling Insert: SDMT120408E-K PR1810, Carbide