Products

• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1285; Drill Bit Size (Wire): #30; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal Inch
• Turning Insert: CCGW3252TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1250; Drill Bit Size (Inch): 0.1250; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal I
• Indexable Drill Insert: 13 BK79, Carbide TiAlN Finish, Trigon
• Turning Insert: TCGW18151TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.0938; Drill Bit Size (Inch): 0.0937; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal I
• Turning Insert: TCGW2151TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.0980; Drill Bit Size (Wire): #40; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal Inch
• Ball Grip Quick-Release Pin: Ring Handle, 5/8″ Pin Dia, 1″ Usable Length 2.84″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Turning Insert: CCGW2151TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Sheet: SBR Rubber, 12″ Wide, 36″ Long, Black Durometer 75, Plain Backing
• Push-To-Connect Tube Fitting: Connector, 1/2″ Thread, 3/8″ OD Kynar, 250 psi
• Turning Insert: DCGW21.5.5FNA4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW21.51FN_A4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Arc Flash Clothing Kit: Size X-Large, Cotton, Coat, Hoods & Leggings
• Turning Insert: CCGW21.5.5FNA3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0396MC
• Striping Spray Paint: Red
• Turning Insert: CCGW21.51FN_A3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class C, 4-Point Suspension White, HDPE, Vented, Slotted
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7641; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: CCGW32.52FN_A3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Drywall & Hollow Wall Anchors; Thread Size (Inch): #8; Anchor Material: Zinc; Minimum Workpiece Thickness: 0.375 in; Maximum Load Capacity: 65.0 lb
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class C, 4-Point Suspension Blue, HDPE, Vented, Slotted
• Turning Insert: TCGW21.5.5FNA4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class E & G, 6-Point Suspension White, HDPE, Slotted
• Turning Insert: TCGW21.52FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Hex Lock Nut: 3/8-16, Grade 9 Steel, Cadmium-Plated with Wax 0.328″ High, 9/16″ Width Across Flats, Right Hand Thread
• Arc Flash Clothing Kit: Size Large, Cotton, Bib Overalls, Hoods & Jacket
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class E & G, 6-Point Suspension Orange, HDPE, Slotted
• Turning Insert: CCGW32.52FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 30' Long x 6' Wide, 12 mil Polyethylene, Rectangle
• Corner Chamfer End Mill: 4.00 mm Dia, 8.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Turning Insert: CCGW432FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Filtered Enclosure Cooling Blowers & Accessories; Accessory Type: Exhaust Grille; Accessory Type: Exhaust Grille; Overall Width/Diameter (Inch): 4; 4 in; Overall Width: 4 in; Overall Height: 0.9000 in; Overall Height (Inch): 0.9000 in; 0.9000; For Use Wit
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class C, 4-Point Suspension Yellow, HDPE, Vented, Slotted
• Turning Insert: CCGW21.5.5FNA3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Electrical Protection Gloves & Leather Protectors; Size: 2X-Large; X-Large; Primary Material: Polyester; Material: Polyester; Lining Material: Unlined; Length (Inch): 14.00; Back Material: None; Color: White; Grip Surface: Smooth; Men's Size: X-Large; Cuf
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class E & G, 6-Point Suspension Blue, HDPE, Slotted
• Turning Insert: TCGW18155TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Electrical Protection Gloves & Leather Protectors; Size: Large; X-Large; Primary Material: Polyester; Material: Polyester; Lining Material: Unlined; Length (Inch): 14.00; Back Material: None; Color: White; Grip Surface: Smooth; Men's Size: Large; Cuff Sty
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class C, 4-Point Suspension Orange, HDPE, Vented, Slotted
• Turning Insert: DCGW2155TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Electrical Protection Gloves & Leather Protectors; Size: Medium; Large; Primary Material: Polyester; Material: Polyester; Lining Material: Unlined; Length (Inch): 14.00; Back Material: None; Color: White; Grip Surface: Smooth; Men's Size: Medium; Cuff Sty
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class E & G, 6-Point Suspension Yellow, HDPE, Slotted
• Electrical Protection Gloves & Leather Protectors; Size: Small; Medium; Primary Material: Polyester; Material: Polyester; Lining Material: Unlined; Length (Inch): 14.00; Back Material: None; Color: White; Grip Surface: Smooth; Men's Size: Small; Cuff Styl
• Turning Insert: TCGW2151TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGW2152TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: DCGW2151TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Plastic Sheet: Acetal, 1/16″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Turning Insert: DCGW2152TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Plastic Sheet: Acetal, 1/16″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Hydraulic Chuck Sleeves; Inside Diameter (mm): 16; Outside Diameter (mm): 32
• Turning Insert: DCGW3251TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Fixture Accessories; Type: Indexing Key; For Use With: Zero Point System Clamping Modules
• Ball End Mill: 2.00 mm Dia, 2.00 mm LOC, 2 Flute, Solid Carbide
• Turning Insert: DCGW2152TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• 3/8″ Screw 1-1/4″ OAL 0.38″ ID x 3/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Turning Insert: DCGW3255TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Tap Set: UNC, 3 Flute, Bottoming Plug & Taper, High Speed Steel, Bright Finish 1.8125″ OAL, 2B & 3B Class of Fit, Right Hand, 3 Pc
• Earmuffs: 27 dB NRR Over the Head
• Turning Insert: DCGW3251TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Sheet: Silicone Rubber, 12″ Wide, 12″ Long, Semi-Clear Durometer 60, Plain Backing
• Indexable Drill Insert: TPMX28RBG IC908, Carbide Coated
• Chucking Reamer: 0.1095″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Cable Tools & Kits; Tool Type: Blade; Number of Pieces: 1.000; Case Type: None; Additional Information: 1 Year Limited Warranty; For Use With: ™Compatible with the M12 ™ and M18 ™ Cable Strippers
• Chucking Reamer: 0.1405″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Diamond Pattern Router Bit: 1″ LOC, 1/8″ Shank Dia, End Mill 2-1/2″ OAL, Solid Carbide, Amorphous Diamond Finish
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Corner Chamfer End Mill: 5.00 mm Dia, 9.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Wrenches For Indexables; Wrench Type: Hex Wrench; Indexable Tool Type: Toolholder; Drive Type: Hex; Toolholder Style Compatibility: H00-2009-33; Hardware Compatibility: Toolholder; Overall Length: 8.07; Tool Material: Steel; Wrench Size: 2.00 mm; Series:
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1960; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Size L Hi-Viz Yellow High Visibility Short Sleeve T-Shirt 44″ Chest, 1 Pocket, Polyester
• Wrenches For Indexables; Wrench Type: Hex Wrench; Indexable Tool Type: Toolholder; Drive Type: Hex; Toolholder Style Compatibility: H00-1505-27; Hardware Compatibility: Toolholder; Overall Length: 8.46; Tool Material: Steel; Wrench Size: 1.50 mm; Series:
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2160; Maximum Bore Depth (Decimal Inch): 0.4000; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Hex Head Cap Screw: M14 x 1.50 x 100 mm, Grade 8.8 Steel, Uncoated Partially Threaded, 22 mm Hex, DIN 960 & ISO 8676
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2160; Maximum Bore Depth (Decimal Inch): 0.8000; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Wrenches For Indexables; Wrench Type: Hex Wrench; Indexable Tool Type: Toolholder; Drive Type: Hex; Toolholder Style Compatibility: H00-2512-40; Hardware Compatibility: Toolholder; Overall Length: 8.07; Tool Material: Steel; Wrench Size: 2.50 mm; Series:
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0050; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Round Die: #5-40, High Speed Steel
• Wrenches For Indexables; Wrench Type: Hex Wrench; Indexable Tool Type: Toolholder; Drive Type: Hex; Toolholder Style Compatibility: H00-4020-60; Hardware Compatibility: Toolholder; Overall Length: 8.46; Tool Material: Steel; Wrench Size: 4.00 mm; Series:
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Black Reducing Coupling: 1-1/4″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0050; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.7289; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 70, Plain Backing
• Round Die: #4-40, High Speed Steel
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0050; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Fiber Disc: 5″ Disc Dia, 36 Grit, VICTOGRAIN
• Corner Chamfer End Mill: 6.00 mm Dia, 10.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Trade Hammers; Handle Material: Ash
• Round Die: #3-48, High Speed Steel
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.03″ Groove Width
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.02″ Groove Width
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2447; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Ball End Mill: 0.375″ Dia, 1″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, Uncoated, Single End, Series 2015
• Plastic Bar: Polycarbonate, 1/4″ Thick, Clear
• Corner Chamfer End Mill: 8.00 mm Dia, 12.00 mm LOC, 4 Flute, 0.12 mm Chamfer Width, Solid Carbide
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Earplug: 32dB, Polyurethane, Bullet, Roll Down, Uncorded Orange, 250 Pairs per Pack
• Taper Length Drill Bit: 0.2126″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Pedestrian Barrier Kits; Chain Material: Polyethylene; Post Material: HDPE; Surface Pattern: Solid Color; Chain Color: Yellow; Post Color: Yellow; Chain Trade Size: 8; Inside Link Length: 1.32 in; Inside Link Width: 0.47
• Cable Support Grips; Cable Support Grip Type: Universal Eye; Maximum Cable Diameter (Decimal Inch): 0.5600 in; Minimum Cable Diameter: 0.4300 in; Overall Diameter: 0.5600 in; Breaking Strength: 550 lb; Overall Diameter (Decimal Inch): 0.5600 in; Resistanc
• Precision Compression Spring: 0.8200" OD, 9-1/2" Free Length
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Smoke Lenses, Full-Framed Black Frame, Wraparound, Adjustable
• Ball Grip Quick-Release Pin: L-Handle, 8 mm Pin Dia, 20 mm Usable Length 52.3 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Hex Head Cap Screw: 7/16-14 x 3-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Chucking Reamer: 0.373″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, Cobalt 6 Flute
• Corner Chamfer End Mill: 0.1378″ Dia, 4 Flute, Solid Carbide 54 mm OAL, 6 mm Shank Dia, AlTiN Coated, Centercutting
• #2 Screw 15/16″ OAL 0.09″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Corner Chamfer End Mill: 0.0787″ Dia, 4 Flute, Solid Carbide 57 mm OAL, 6 mm Shank Dia, AlTiN Coated, Centercutting
• #6 Screw 15/16″ OAL 0.14″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Traffic Barrels, Delineators & Posts; Type: Vertical Panel; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 14-3/4; Additional Information: Stripe Width: 4 in; Series: 4100; Subbrand: Gemstone ™; Sheeting Grade: High Intensity Pri
• Corner Chamfer End Mill: 0.0984″ Dia, 4 Flute, Solid Carbide 57 mm OAL, 6 mm Shank Dia, AlTiN Coated, Centercutting
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide TiCN Finish, 3.00 mm TPI, Series 25665
• 0.233″ ID x 5/16″ OD, Nylon Tube 250 psi, Natural (Color), -65 to 200°F
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide TiCN Finish, 2.00 mm TPI, Series 25665
• Square End Mill: 7/32'' Dia, 5/8'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Chamfer End Mill: 10.00 mm Dia, 15.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide TiCN Finish, 1.25 mm TPI, Series 25665
• Square End Mill: 0.0157'' Dia, 0.0236'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Hex Head Cap Screw: 3/8-24 x 1″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide TiCN Finish, 3.00 mm TPI, Series 25664
• Milling Insert: XOHX 163030-FM2 CTPP216, CTPP216, Solid Carbide N/A Finish, 1.0000″ OAW
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide TiCN Finish, 1.00 mm TPI, Series 25664
• Slitting & Slotting Saw: 5″ Dia, 5/64″ Thick, 1″ Arbor Hole, 40 Teeth, High Speed Steel Bright/Uncoated, Straight
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Black Union: 3/4″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Taper Length Drill Bit: 0.3860″ Dia, 118 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5536
• Ball End Mill: 0.375″ Dia, 1″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 37 ° Helix, Uncoated, Single End, Series 2045
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Taper Length Drill Bit: 0.3770″ Dia, 118 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5536
• Trade Hammers; Handle Material: Ash
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 17.00; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 18; Shank Diameter (mm): 6.0000; Overall Length (Decimal Inch): 42.20000; Maximum Reach (mm): 16.00
• Ball Grip Quick-Release Pin: T-Handle, 3/4″ Pin Dia, 1″ Usable Length 2.72″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Plastic Sheet: Acetal, 3/8″ Thick, Black Rockwell M-90
• Plastic Rod: 120" Long, 2.25" Dia, Natural Color, Opaque, 5000 - 1000 psi Tensile Strength
• Plastic Sheet: Acetal, 1/4″ Thick, White Rockwell M-90
• Ball Grip Quick-Release Pin: T-Handle, 3/4″ Pin Dia, 3/4″ Usable Length 2.47″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Ball Grip Quick-Release Pin: T-Handle, 3/4″ Pin Dia, 1/2″ Usable Length 2.22″ OAL, 17-4 Stainless Steel, Aluminum Handle
• #4-40, 1.437″ OAL, 3/16″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/4″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 6/6, Uncoated
• Ink: Magenta Use with PIXMA TS9120 Gray Wireless Inkjet All-In-One Home Printer
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 3; Threading Diameter (mm): 6.30; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 1.50; Maximum Pitch (mm): 1.50; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 5.80; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 0.75; Maximum Pitch (mm): 0.75; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 3; Threading Diameter (mm): 6.50; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 1.50; Maximum Pitch (mm): 1.50; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 10.70; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 18; Shank Diameter (mm): 6.0000; Overall Length (Decimal Inch): 42.20000; Maximum Reach (mm): 16.00
• Turning Insert: DCMT32.50.5FW4 WSM20S, Carbide
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 6.50; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 1.25; Maximum Pitch (mm): 1.25; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Standard Knurl Wheel: 1″ Dia, 90 ° Tooth Angle, 16 TPI, Straight, High Speed Steel 3/8″ Face Width, 5/16″ Hole, Series O
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 6.20; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 48; Minimum Threads Per Inch: 16; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.50; Manufactur
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 5.60; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 0.75; Maximum Pitch (mm): 0.75; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, SUPER-B Finish 5.1″ Thread Length, 3.15″ OAL, Right Hand Flute, Right Hand Thread, H3, Series E812
• Flexible Cylinder Hone: 180 Grit, Silicon Carbide Coarse Grade, 7-7/8″ OAL
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 6.30; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 1.00; Maximum Pitch (mm): 1.00; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Tank Flanges; Overall Height (Inch): 3/4
• Flexible Cylinder Hone: 120 Grit, Silicon Carbide Coarse Grade, 7-7/8″ OAL
• Duct Tape: 2″ Wide, 5 mil Thick, Stainless Steel Acrylic Adhesive, 150 lb/in Tensile Strength
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 6.50; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 28; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.50; Manufacturer's Part Number: M659TH28WL16
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 5.40; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 0.50; Maximum Pitch (mm): 0.50; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Stainless Steel Pipe Nipple: Grade 304 & 304L Schedule 40
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 635.00; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 1.25; Maximum Pitch (mm): 1.25; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.35; Manufacturer's P
• Abrasive Belt: 25" Wide, 48" OAL, 150 Grit, Aluminum Oxide
• Plastic Sheet: Polyvinylchloride, 3/16″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 11.50; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 19; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.50; Manufacturer's Part Number: M659TH19WL1
• Corner Radius End Mill: 0.1406″ Dia, 0.22″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 6.10; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 27; Shank Diameter (mm): 6.0000; Overall Length (Decimal Inch): 42.20000; Maximum Reach (mm): 16.00;
• Plastic Bar: Cast Acrylic, 1/4″ Thick, Clear Rockwell M-95
• Corner Radius End Mill: 0.1406″ Dia, 0.425″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 6.30; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 1.00; Maximum Pitch (mm): 1.00; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Black 45 ° Elbow: 1/4″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Plastic Bar: Cast Acrylic, 1/4″ Thick, Clear Rockwell M-95
• ER40 Slotted Collet Nut
• Cleaner: 5 gal Bucket Concentrated, Lemon Scent
• Corner Chamfer End Mill: 12.00 mm Dia, 18.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Ball End Mill: 0.0394″ Dia, 0.0394″ LOC, 2 Flute, Solid Carbide 57 mm OAL, 6 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Strip: Neoprene Rubber, 3/4″ Wide, 120″ Long, Black Durometer 70, Acrylic Adhesive Backing
• 6' Cable Length, Combination Laptop Lock Cable Lockout Steel Cable, Steel Sleeve
• Chucking Reamer: 0.0465″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Extra Length Drill Bit: 0.1929″ Dia, 120 °, Cobalt WXL Finish, Spiral Flute, Straight-Cylindrical Shank, Series 1750
• FlexC 42 Quick-Change Collet 31mm Hex Serrated
• Duct Tape: 1″ Wide, 3.6 mil Thick, Aluminum Foil Silicone Adhesive, 20 lb/in Tensile Strength
• Ball End Mill: 0.1563″ Dia, 0.5″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Black Tee: 2-1/2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Spot Welder Tips; Tip Type: Double Bend Tip D Nose (Offset); Material: RWMA Class 2 - C18200; Type: Double Bend Tip D Nose (Offset)
• Arc Flash Clothing Kit: Size Large, Cotton, Bib Overalls, Hoods & Jacket
• Welding Gloves: HeatArmor™ Size 2X-Large, Goatskin Leather, Pair, for MIG
• Grooving Tool: Internal Solid Carbide
• Twist Lock Receptacles; Receptacle/Part Type: Receptacle; Gender: Female; NEMA Configuration: L19-20R; Flange Style: Flanged; Amperage: 20 A; Number Of Poles: 4; Number Of Wires: 4; Maximum Cord Diameter: 29.20 mm; Resistance Features: Impact-Resistant; N
• Grooving Tool: Internal Solid Carbide
• Die Drill Bit: 19/64″ Dia, 135 °, Solid Carbide Uncoated, 3/4″ Flute, 2-1/2″ OAL, Series 200
• Plastic Bar: Acetal, 1/4″ Thick, Black Rockwell M-90
• Traffic Barrels, Delineators & Posts; Type: Open Top Delineator; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 4-5/8; Additional Information: Series: 6828; Sheeting Grade: Diamond; Stripe Color: White; Post Diameter: 4 in; Numbe
• Linear Motion Systems; Type: Linear Guide; Linear Motion Type: Linear Guide; Overall Width (Decimal Inch): 2.5200; Overall Length (mm): 19.0500
• Mud Flaps; Fits Vehicle Make: All Makes & Models; Year: All; Location: Rear; Material: Rubber; Material: Rubber
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Clear Lenses, Frameless, UV Protection Charcoal Frame, Single, Adjustable
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Blue Mirror Lenses, Full-Framed Black Frame, Wraparound, Adjustable
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Blue Mirror Lenses, Full-Framed Black Frame, Wraparound, Adjustable
• Open Cell Polyurethane Foam: Gray Adhesive Backing
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Fire Mirror Lenses, Full-Framed Black Frame, Wraparound, Adjustable
• #2 Screw 7/32″ OAL 0.09″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 60, Plain Backing
• Turning Insert: NPCCGW21.51-GA2 MB8120, Cubic Boron Nitride (CBN)
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Fire Mirror Lenses, Full-Framed Black Frame, Wraparound, Adjustable
• #4 Screw 7/32″ OAL 0.115″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Toilet Seats; Type: Closed Front Lift w/ Cover; Style: Elongated; Material: Plastic; Color: White; Outside Width: 15; Inside Width: 0; Length (Inch): 18.675; Minimum Order Quantity: Plastic; Material: Plastic
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Blue Mirror Lenses, Full-Framed Black Frame, Wraparound, Adjustable
• Plastic Bar: Polyvinylchloride, 3/4″ Thick, Dark Gray
• Hex Head Cap Screw: 7/16-20 x 2-1/2″, Grade 5 Steel, Zinc-Plated Partially Threaded, ASME B18.2.1
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Smoke Lenses, Full-Framed Black Frame, Wraparound, Adjustable
• Corner Radius End Mill: 5/16″ Dia, 15/32″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Jobber Drill: #54, 118 deg Point, High Speed Steel
• Keys & Drivers For Indexables; Drive Type: Torx Plus; Indexable Tool Type: Toolholder; Torx Size: T8; Fastener Type: Torx ™ Plus; Overall Length (Decimal Inch): 2.36220; Package Quantity: 1
• Corner Radius End Mill: 5/16″ Dia, 15/32″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 8' Long x 6' Wide, 12 mil Polyethylene, Rectangle
• Jobber Drill: #53, 118 deg Point, High Speed Steel
• Plastic Bar: Acetal, 3/4″ Thick, White
• Milling Insert: WNMU080608EN-SM PR1825, Carbide
• Notebook & Notepad: 1,200 Sheets, Plain Ruled Pink Cover
• Plastic Bar: Acetal, 3/4″ Thick, White
• Ball Grip Quick-Release Pin: T-Handle, 10 mm Pin Dia, 15 mm Usable Length 51.8 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Notebook & Notepad: 1,200 Sheets Blue Cover
• Ink: Cyan Use with PIXMA MG6822 White, Silver Wireless, PIXMA MG7720 Red Wireless & PIXMA TS6020 Printer Black
• Ball Grip Quick-Release Pin: T-Handle, 10 mm Pin Dia, 10 mm Usable Length 46.8 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Notebook & Notepad: 1,200 Sheets Green Cover
• Taper Length Drill Bit: 0.1935″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Toilet Seats; Type: Open Front w/o Cover; Style: Round; Material: Plastic; Color: Bone; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Panel Meters; Panel Meter Type: Panel Meter; Power Measurement Type: DC Voltmeter; Panel Meter Display Type: Digital LCD; Maximum Input Voltage: 5
• Micro Drill Bit: 0.0453″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Toilet Seats; Type: Open Front w/ Cover and Self-Sustaining; Style: Round; Material: Plastic; Color: Biscuit; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Arc Flash Clothing Kit: Size 4X-Large, Cotton, Jacket, Pants & Hoods
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Clear Lenses, Frameless, UV Protection Charcoal Frame, Single
• Sponges & Scouring Pads; Pad Type: Scouring Pad; Scour Type: Clean; Material: Synthetic Fiber; Color: White; Width (Inch): 6; Length (Inch): 9; Thickness (Decimal Inch - 4 Decimals): 0.4000; Length (Decimal Inch - 4 Decimals): 9.0000; Width (Decimal Inch
• Die Drill Bit: 0.1910″ Dia, 135 °, Solid Carbide Uncoated, 5/8″ Flute, 2″ OAL, Series 200
• Forkliftable Towable Order Picking Utility Cart: 53-1/2" Long, 24" Wide, Steel, 2000 lb Capacity, Gray