Products

• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6809; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill: 3/16" Dia, 3/8" LOC, 0.50 mm Radius, 4 Flute, Solid Carbide
• Corner Radius End Mill: 5/16″ Dia, 1″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Plastic Bar: Polycarbonate, 1/2″ Thick, Clear
• Corner Radius End Mill: 3/16" Dia, 3/8" LOC, 0.0100" Radius, 4 Flute, Solid Carbide
• Free Standing Flashlight: LED AAA Rechargeable Batteries Included
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Corner Chamfer End Mill: 18.00 mm Dia, 32.00 mm LOC, 5 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Arc Flash Clothing Kit: Size Large, Cotton, Coveralls & Hoods
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Arc Flash Clothing Kit: Size Small, Cotton, Coat, Hoods & Leggings
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Label Maker Label: White, Nomex, 250 per Roll
• Arc Flash Clothing Kit: Size 3X-Large, Cotton, Coveralls & Hoods
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Jacket, Pants & Hoods
• Label Maker Label: White, Polyolefin, 200" OAL
• Corner Chamfer End Mill: 19.00 mm Dia, 38.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Label Maker Label: White, Polyolefin, 200" OAL
• Taper Length Drill Bit: 0.1770″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Corner Radius End Mill: 0.095″ Dia, 0.285″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Taper Length Drill Bit: 0.1520″ Dia, 118 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5537
• Door Closer Accessories; For Use With: LCN 8310 Power Operator Actuators; For Use With: LCN 8310 Power Operator Actuators
• Black Coupling: 3″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Scissors, Forceps & Tweezers; Product Type: Forceps; Overall Length: 7.00 in; Blade Material: Stainless Steel; Handle Material: Stainless Steel; Tip Shape: Straight; Blade Style: Straight; Disposable: No; Color: Silver
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Taper Length Drill Bit: 0.1590″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Taper Length Drill Bit: 0.1730″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Abrasive Belt: 6" Wide, 48" OAL, 60 Grit, Zirconia Alumina
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Corner Radius End Mill: 0.085″ Dia, 0.255″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Modular Reamer Drive Pin
• Grooving Tool: Undercut Solid Carbide, 5/16″ Shank Dia, 0.062″ Groove Width
• Corner Radius End Mill: 0.065″ Dia, 0.195″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Black Tee: 1-1/2 x 1-1/4 x 3/4″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Electromagnet Lock Accessories; Type: Hardwired Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Hardwired Exit Alarm; Accessory Type: Hardwired Exit Alarm; Type: Hardw
• Spade Drill Insert: 11/16″ Dia, Series 0, 132 ° Point AM200 Finish, Series 0
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Indexable Drill Insert: 03 BK8425, Carbide TiAlN & TiN Finish, Trigon
• Paper Towels: Continuous Roll, 8 Rolls, Roll, 2 Ply, Recycled Fiber, White 11″ Wide, 64' Roll Length, 156 Sheets
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 20.00 mm Dia, 38.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Corner Radius End Mill: 0.085″ Dia, 0.255″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Metal Push-To-Connect Tube Fittings; Fitting Type: CONN; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/2″; Tube Outside Diameter: 5/8; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Overall Length
• Flexible Coupling: Sinter Carbon Steel
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Corner Radius End Mill: 0.055″ Dia, 0.165″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Ink Cartridge: Black Use with Brother MFC-J5830DW, J5930DW, J6535DW, J6935DW
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Encapsulated Suits: 5X-Large, Orange, Multi-Layer Non-Woven Barrier Laminate Fabric, N/AClosure, Taped & Welt, Yes
• M4x0.7, 17.53mm OAL, 8mm Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 8mm Body Length, 9.53mm Thread Length, 4.1mm Thread Depth, Grade T-3, Uncoated
• 1/2-13, 1-1/8″ Flange Diam, 11/16″ High, 7/8″ Across Flats, Flange Nut Grade 303 Stainless Steel, 3/16″ Flange Height
• Corner Radius End Mill: 0.055″ Dia, 0.083″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Flash Drive: Use with Mac & Windows
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.04″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 25 mm Dia, 45.00 mm LOC, 3.00 mm Radius, 8 Flute, Solid Carbide
• Corner Radius End Mill: 0.04″ Dia, 0.032″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Push-To-Connect Tube to Male & Tube to Male NPTF Tube Fitting: 1/2″ Thread, 3/8″ OD Brass, 250 psi
• Corner Radius End Mill: 0.031″ Dia, 3/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Ring Pipe Thread Gages; Thread Size: 2-11-1/2; Classification: L2; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: ANPT; Additional Information: Specification Met: SAE AS71051; Thread Size (Inch): 2-11-1/2
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Black 90 ° Street Elbow: 1-1/2 x 1-1/4″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• #6-32, 3/4″ OAL, 3/16″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 1/2″ Body Length, 1/4″ Thread Length, 1/4″ Thread Depth, Grade 6/6, Uncoated
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.01″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End
• #10-32, 3/4″ OAL, 1/2″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 3/8″ Body Length, 3/8″ Thread Length, 3/16″ Thread Depth, Grade 12L14, Zinc-Plated
• #6-32, 0.656″ OAL, 1/4″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 0.406″ Body Length, 1/4″ Thread Length, 1/4″ Thread Depth, Grade 6/6, Uncoated
• Corner Radius End Mill: 0.109″ Dia, 0.327″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Chamfer End Mill: 19.50 mm Dia, 38.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
• #8-32, 0.781″ OAL, 1/4″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 0.406″ Body Length, 3/8″ Thread Length, 1/4″ Thread Depth, Grade 6/6, Uncoated
• Extra Length Drill Bit: 0.2031″ Dia, 130 °, High Speed Steel Uncoated, 5.315″ Flute Length, 7.677″ OAL, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• #4-40, 3.6869″ OAL, 1/4″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 3-1/2″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade T-3, Uncoated
• Indexable Drill Insert: 4T, Carbide AM485 Finish
• Extra Length Drill Bit: 0.2559″ Dia, 130 °, High Speed Steel Uncoated, Parabolic Flute, Straight-Cylindrical Shank, Series 524
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• #8-32, 1″ OAL, 3/8″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 5/8″ Body Length, 3/8″ Thread Length, 3/8″ Thread Depth, Grade 360, Zinc-Plated
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.01″ Radius, 7 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End
• O-Ring: 2.6″ ID x 2.887″ OD, 0.139″ Thick, Dash 231, Kalrez 4079 Round Cross Section
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Die Drill Bit: 0.2992″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Power Pallet Truck: 5,500 lb Capacity, 27″ OAW, 27″ Forks 3″ Min Lift Height, 48″ Fork Length x 27″ Fork Width, 27″ Overall Width
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Adjustable Stop Countersink Cage
• Compression Packing; Material: PTFE; Size: 1/4; Spool Length: 5; Color: White; Maximum Working Pressure (psi): 1000; 1000.0 psi; PSC Code: 5330; Color: White; Material: PTFE; Maximum Working Pressure: 1000.0 psi; Material: PTFE
• Jobber Length Drill Bit: 0.9646″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 7.087″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Jobber Length Drill Bit: 0.9055″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.811″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Jobber Length Drill Bit: 0.8858″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.811″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Toilet Seats; Type: Baby Bowl w/o Cover; Style: Elongated; Material: Plastic; Color: White; Outside Width: 14-1/2; Inside Width: 0; Length (Inch): 18.6; Minimum Order Quantity: Plastic; Material: Plastic
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Jobber Length Drill Bit: 0.8661″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.535″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Plastic Bar: Polyvinylchloride, 2″ Thick, Dark Gray
• Jobber Length Drill Bit: 0.8268″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.535″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Plastic Sheet: Chlorinated Polyvinyl Chloride, 1/16″ Thick, Gray, 7,500 psi Tensile Strength Rockwell R-115
• Jobber Length Drill Bit: 0.9843″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 7.087″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Step Drill Bits; Tool Material: High Speed Steel; Shank Type: Hex Shank; Hole Diameter: 1/2 in; Series: 6 Steps; Overall Length (Inch): 3-3/8; Minimum Hole Diameter (Inch): 1/4; Maximum Hole Diameter (Inch): 1/2; Shank Diameter (Decimal Inch): 1/4; Step L
• Jobber Length Drill Bit: 0.9449″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.811″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.8465″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.535″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• UHMW Film Tape: 1″ Wide, 36 yd Long, 5 mil Thick 40 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Upright Dustpan: Polypropylene Body, 31″ Aluminum Handle 13″ Wide, Green
• O-Ring: 1.6″ ID x 1.56″ OD, 1/4″ Thick, FEP-Encapsulated Viton Round Cross Section
• 400 Grit Silicon Carbide Square Polishing Stone Super Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• Hex Head Cap Screw: 1/4-20 x 1″, Grade 9 Alloy Steel, Zinc-Plated
• Size 2XL Hi-Vis Orange High Visibility Short Sleeve Polo Shirt 52″ Chest, 1 Pocket, Polyester
• Cord Stock; Shape: Round; System of Measurement: Inch; Diameter (Decimal Inch): 0.1390; Tensile Strength (psi): 725; Coil Length (Feet): 10; Durometer: 70; Maximum Temperature (F): 350.000; Durometer (Shore A): 70A; Standard; Hardness: Standard
• Grooving Tool: Internal Solid Carbide
• Ink Cartridge: Black Use with Epson WorkForce WF-2630, WF-2650, WF-2660 & Expression XP-420
• Laundry Detergent; Form: Powder; Container Type: Packet; Container Size (oz.): 31.7; Container Size: 31.7; Harshness: Moderate; Features: Nontoxic; Four-Enzyme; Scent: Unscented
• Grooving Tool: Internal Solid Carbide
• Stationary Work Bench: 30″ Wide, 60″ Deep, 30″ High
• Latches; Type: Corner Fastener with Flat Counterplate; Length (mm): 56.00; Width (mm): 39.00; Height (mm): 52.0000; Finish/Coating: Polished; Distance Between Mounting Hole Centers: 25; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless
• Grooving Tool: Internal Solid Carbide
• Trade Hammers; Handle Material: Fiberglass
• Stationary Work Bench: 30″ Wide, 60″ Deep, 37″ High
• Grooving Tool: Internal Solid Carbide
• Arc Flash Clothing Kit: Size 4X-Large, Cotton, Jacket, Pants & Hoods
• Thread Forming Tap: #2-56, UNC, Modified Bottoming, High Speed Steel-CO, TiCN Finish 0.437″ Thread Length, 1.75″ OAL, H9, Series 14001
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 20.00; Groove Width (mm): 2.00; Shank Diameter (mm): 20.0000; Overall Length (mm): 20.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 1.900;
• Arc Flash Clothing Kit: Size 5X-Large, Cotton, Coveralls & Hoods
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE RUN SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 1/4; Fitting Shape: Tee; Maximum Working Pressure (Psi
• Pipe Fitting: 1-1/2 x 1-1/2″ Fitting, 316 Stainless Steel 150 psi
• Jobber Length Drill Bit: 45 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 4.20; Groove Width (mm): 1.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 1.900; Ma
• Thread Forming Tap: #2-56, UNC, Modified Bottoming, High Speed Steel-CO, TiCN Finish 0.437″ Thread Length, 1.75″ OAL, H8, Series 14001
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 4.20; Groove Width (mm): 0.79; Shank Diameter (mm): 4.0000; Overall Length (mm): 45.7000; Material Grade: Submicron; Maximum Hole Depth (mm): 25.00; Projection (mm): 1.960; Ma
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Jobber Length Drill Bit: 45 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Behold Furniture Polish Lemon, 12 oz, RTU, 6/CT 6
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Reduced Shank Drill Bit: 9/16'' Dia, 1/2'' Shank Dia, 118 ™, High Speed Steel 6'' OAL, 3'' Flute Length, Bright/Uncoated Finish, Reduced with Flat Shank, Series 620
• Arc Flash Clothing Kit: Size Medium, Cotton, Coat, Hoods & Leggings
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Plastic Rod: 96" Long, 0.3750" Dia, Natural Color, Opaque, 5000 psi Tensile Strength
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 3.000; Number of Walls: 0
• Safety Goggles: Chemical Splash Dust & Particulates, Anti-Fog, Clear Polycarbonate Lenses Indirect Vent, Gray Frame, Size Universal
• M5x0.8 Coarse 12mm Long Pozi Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 3.000; Number of Walls: 0
• Single Pole Protective Caps; Gender: Male; NEMA Rating: 3R, 4X, 12; For Use With: Male Plug; Standards Met: UL; cUL Listed
• 8-1/2″ OAL, 1-1/4″ ID, 550 Max psi, Flexible Metal Hose Assembly 1-1/4″ Fitting, Male Pipe x Male Pipe End Connections, Carbon Steel Fitting, Stainless Steel Hose
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Jacket, Pants & Hoods
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Vacuum Cleaner Attachments & Hose; Attachment Type: Upholstery Tool; For Use With: Wet/Dry Vacs; ESD Safe: No; Accessory Kit Contents: Utility Nozzle; Single or Double Edge: Single; Number of Pieces: 1.000; Acid Resistant: No
• TIG Torch Parts & Accessories; Type: Power Cable Adapter; Length (Inch): 2; For Use With: 26; For Use With: 26; PSC Code: 3438; For Use With: 26; Type: Power Cable Adapter
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6578; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Arc Flash Clothing Kit: Size Medium, Cotton, Jacket, Pants & Hoods
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/8-7; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 4; Material: H
• 36 x 12 x 1/8″ Gray Pressed Wool Felt Sheet Plain Backing, 400 psi Tensile Strength, 2 Lb/Sq Yd, SAE Grade F-3
• 4″ Long x 4-1/2″ Wide Grade 1 304 Stainless Steel Full Mortise Commercial Hinge Satin Stainless Steel Finish, 5 Knuckles, 8 Holes
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/8-7; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 4; Material: H
• Turning Insert: CCGW32.51FN_A3 CTBH21U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Pipe Thread Plug Gage: Tapered, 3-8
• Pipe Fitting: 1 x 1/4″ Fitting, 316 Stainless Steel 150 psi
• Turning Insert: CCGW2152TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Pipe Thread Plug Gage: Tapered, 3-8
• Turning Insert: TCGW18155FNA4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Arc Flash Clothing Kit: Size 4X-Large, Cotton, Coat, Hoods & Leggings
• Pipe Wrenches; Wrench Type: Heavy-Duty Pipe, Offset; Maximum Pipe Capacity (Inch): 2; Overall Length (Inch): 14; Material: Ductile Iron, Alloy Steel, Chromium-Vanadium Steel; Jaw Texture: Serrated
• Turning Insert: TCGW21.51FN_A4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Bib Overalls, Hoods & Jacket
• Annular Cutter: 11/16″ Dia, 1″ Depth of Cut, High Speed Steel 3/4″ Shank Dia, Weldon Flat Shank, 2 Flats, Bright/Uncoated
• Arc Flash Clothing Kit: Size Large, Cotton, Coat, Hoods & Leggings
• Turning Insert: CCGW2152TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW32.51FN_A4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Arc Flash Clothing Kit: Size X-Large, Cotton, Jacket, Pants & Hoods
• Arc Flash Clothing Kit: Size 4X-Large, Cotton, Jacket, Pants & Hoods
• #2 Screw 9/32″ OAL 0.09″ ID x 3/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Turning Insert: DCGW21.51FN_A4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Arc Flash Clothing Kit: Size X-Large, Cotton, Jacket, Pants & Hoods
• M3x0.50, 55.76mm OAL, 6mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 51mm Body Length, 4.76mm Thread Length, 6.4mm Thread Depth, Grade 303, Uncoated
• Plastic Sheet: Polyvinylchloride, 3/16″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Turning Insert: DCGW21.5.5FNA4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• #4 Screw 7/32″ OAL 0.115″ ID x 3/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Metal Push-To-Connect Tube Fittings; Fitting Type: 45 ™ EL; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/2″; Tube Outside Diameter: 3/4; Fitting Shape: 45 ™ Elbow; Maximum Working Pressure (Psi
• Plastic Bar: Acetal, 1/4″ Thick, Black Rockwell M-90
• Arc Flash Clothing Kit: Size X-Large, Cotton, Coat, Hoods & Leggings
• Turning Insert: DCGW21.52FN_A3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW32.52FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW32.51FN_A4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Taper Length Drill Bit: 0.1405″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Plastic Bar: Polytetrafluoroethylene, 3/16″ Thick, White
• Keys & Drivers For Indexables; Drive Type: Torx Plus; Indexable Tool Type: Toolholder; Torx Size: T7; Fastener Type: Torx ™ Plus; Overall Length (Decimal Inch): 2.36220; Package Quantity: 1
• Taper Length Drill Bit: 0.1470″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Turning Insert: DCGW21.52FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• M2.5 Screw 25mm OAL 2.7mm ID x 4.5mm OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Disposable Coveralls: Size 3X-Large, 0.5216 oz, Microporous Polypropylene Laminate Non-Woven, 2-Way Zipper with Storm Flap Closure
• Turning Insert: DCGW21.51FN_A4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Cut, Puncture & Abrasive-Resistant Gloves: Size M, ANSI Cut A5, ANSI Puncture 1, Nitrile, HPPE Black, Palm Coated, HPPE Lined, HPPE Back, Nitrile Dipped Grip, ANSI Abrasion 6
• Turning Insert: CCGW32.52FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW21.52FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Back Supports; Type: Belt w/ Detachable Shoulder Straps; Support Type: Belt with Detachable Shoulder Straps; Belt Closure Type: Hook & Loop; Belt Material: Elastic Nylon; Size: Small; Fits Maximum Waist Size (Inch): 33; 33 in; Fits Minimum Waist Size (Inc
• Turning Insert: DCGW32.5.5FNA4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Back Supports; Support Type: Belt with Detachable Shoulder Straps; Belt Closure Type: Hook & Loop; Belt Material: Elastic Nylon; Size: Large; Fits Maximum Waist Size (Inch): 44 in; Fits Minimum Waist Size (Inch): 35 in; Belt Width (Inch): 9; Color: Black;
• Corner Chamfer End Mill: 20.00 mm Dia, 38.00 mm LOC, 5 Flute, 0.30 mm Chamfer Width, Solid Carbide
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0787; Drill Size (Metric): 2.000; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 20.00; Depth of Cut (Metric): 20.00; Number of Flutes: 1; Coolant Hole Configura
• Turning Insert: TCGW21.51FN_A4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0945; Drill Size (Metric): 2.400; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 24.00; Depth of Cut (Metric): 24.00; Number of Flutes: 1; Coolant Hole Configura
• Power Saw Accessories; Accessory Type: Guide Rail Non-Slip Replacement Strip; For Use With: Makita Track saw guide; Material: Rubber
• Turning Insert: CCGW432TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0906; Drill Size (Metric): 2.300; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 23.00; Depth of Cut (Metric): 23.00; Number of Flutes: 1; Coolant Hole Configura
• Wall & Dimmer Light Switches; Switch Type: NonDimmer; Switch Operation: Rocker; Color: White; Color: White; Grade: Commercial; Number of Poles: 1; Amperage: 20 A; Number Of Poles: 1; Overall Height: 4.1600 in; Overall Width: 1.6600 in; Minimum Operating T
• Turning Insert: CCGW3251TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0827; Drill Size (Metric): 2.100; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 21.00; Depth of Cut (Metric): 21.00; Number of Flutes: 1; Coolant Hole Configura
• Pipe 90 ° Street Elbow: 2″ Fitting, 316 Stainless Steel FNPT x MNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0866; Drill Size (Metric): 2.200; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 22.00; Depth of Cut (Metric): 22.00; Number of Flutes: 1; Coolant Hole Configura
• Turning Insert: CCGW431TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0984; Drill Size (Metric): 2.500; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 25.00; Depth of Cut (Metric): 25.00; Number of Flutes: 1; Coolant Hole Configura
• Miniature Manual Ball Valve: Full Port, Brass 2-Way Flow & In-Line, Tube x Tube, 1,000 psi WOG
• Turning Insert: CCGW3252TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2151TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Ball End Mill: 10.00 mm Dia, 14.00 mm LOC, 2 Flute, Solid Carbide
• Turning Insert: CCGW2155TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW3255TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Metal Push-To-Connect Tube Fittings; Fitting Type: BULKHEAD; Connection Type: Push-to-Connect; Material: Brass; Tube Outside Diameter: 5/8; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards: DOT; End Connections: Pus
• Turning Insert: CCGW431TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Turning Insert: TCGW2152TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Ball End Mill: 2.00 mm Dia, 1.60 mm LOC, 3 Flute, Solid Carbide
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use T
• Turning Insert: TCGW18155TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Corner Chamfer End Mill: 3.00 mm Dia, 5.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7504; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: TCGW18151TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Turning Insert: TCGW2155TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• FRL Accessories; Type: Pressure Gauge; Accessory Type: Pressure Gauge; For Use With: Compact, Miniature Regulators; Material: PC+ABS; Port Size: 1/8; Pressure Range (psi): 0 - 140; Width (Decimal Inch): 1.1800; Height (Inch): 1.18; Port Size: 1/8
• Turning Insert: TCGW2151TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use T
• M5x0.8 Coarse 25mm Long 6-Lobe Pin Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Turning Insert: CCGW2155TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Turning Insert: CCGW3251TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW