Products

• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0989; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Proportioner Accessories; Type: E-Z Fill Container; Number of Products Accommodated: 1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0856; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0723; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Bar: Polycarbonate, 3/8″ Thick, Clear
• ER: ER40, 0.875″ 46mm OAL, 41mm Overall Diam, 0.0004″ TIR
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0941; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Milling Chuck Collets; Outside Diameter (Inch): 3/4; Overall Length: 2.09 in; Length Under Head: 1.93 in; PSC Code: 5136; Overall Length (Decimal Inch): 2.09 in
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1394; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• ER: ER40, 26 mm 46mm OAL, 41mm Overall Diam, 0.0004″ TIR
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1261; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• ER: ER40, 0.5″ 46mm OAL, 41mm Overall Diam, 0.0004″ TIR
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1230; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1043; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Single Angle Collet: TG/PG 150 2.001″ Body Dia, 3″ OAL, 0.0004″ TIR
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1176; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Indexable Drill Insert: 0T-A, Cobalt Coated, 90 °
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0859; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• ER16 Slotted Collet Nut Through Coolant
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0726; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Milling Chuck Collets; Inside Diameter (Inch): 3/16; Outside Diameter (Inch): 3/4; Through Coolant: No
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1314; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• ER: ER40, 0.375″ 46mm OAL, 41mm Overall Diam, 0.0004″ TIR
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1229; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1228; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• ER: ER40, 14 mm 46mm OAL, 41mm Overall Diam, 0.0004″ TIR
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1311; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal In
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0909; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1359; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal In
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1226; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1008; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3220; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3220; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal In
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1182; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1313; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2800; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal In
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 1/4; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch)
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1097; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal In
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0998; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Taper Length Drill Bit: 0.1200″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0865; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3220; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal In
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0732; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal In
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1181; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0790; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1096; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal In
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0779; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 1-1/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0864; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Dead Centers; Center Type: Half Center; Shank Type: Morse Taper; Shank Taper Size: MT4; Point Style: Center; Carbide-Tipped: No; Head Diameter (Decimal Inch): 1.2400; Overall Length (mm): 160.00; Included Angle: 60; Overall Length: 160 mm
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0997; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Flexible Coupling: Sinter Carbon Steel, 7/16″ Pipe, 1.06″ OAL
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0731; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Flexible Coupling: Sinter Carbon Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1312; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Flexible Coupling: Sinter Carbon Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1227; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Flexible Coupling: Sinter Carbon Steel
• Hook Up Wire; Wire Size (AWG): 30; Wire Size (sq mm): 30 AWG; Number of Strands: 1; Jacket Color: Green; Overall Length: 100 ft; Maximum Operating Temperature: 221 ™F; Jacket Material: Kynar; Standards Met: UL 1423; Overall Length (Feet): 100 ft; Maximum
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1317; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Flexible Coupling: Sinter Carbon Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1009; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Flexible Coupling: Sinter Carbon Steel, 11/16″ Pipe, 1.06″ OAL
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1231; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1018; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1321; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1019; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Strip: Silicone Rubber, 2″ Wide, 36″ Long, Red Durometer 70, High Temperature Adhesive Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1104; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1237; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1322; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0917; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Adhesive Backed Sanding Sheets
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1149; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1234; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1016; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1367; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1101; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1017; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1368; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0918; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Hex Head Cap Screw: M20 x 2.50 x 200 mm, Grade 10.9 Steel, Zinc-Plated Partially Threaded, 30 mm Hex, DIN 931
• Indexable Broaching Accessories; Accessory Type: Torx Driver; For Use With: Size 6 & 8 Tool Holder; Additional Information: T-15
• Ball Grip Quick-Release Pin: Button Handle, 6 mm Pin Dia, 40 mm Usable Length 62.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1235; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1102; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0955; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0737; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0822; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1054; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1272; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1103; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1187; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Replacement Suspensions; Hard Hat Compatibility: MSA; Material: Nylon; Adjustment: Ratchet; Color: Black; Suspension: 4-Point; Suspension: 4-Point
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1369; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 1.1; Control Circuit Voltage: 230 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.5; Maximum Power Rating (VA): 2500; Socket Connection Type: Faston Pin; Amperage: 10; Number Of Pins: 5
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1236; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0956; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0738; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1273; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1055; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• ER: ER11 1″ OAL, ″ Overall Diam
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1110; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• ER: ER11 1″ OAL, ″ Overall Diam
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0953; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1185; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, Clear Rockwell M-95
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1052; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Black Tee: 1-1/2 x 1 x 1-1/4″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0868; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0735; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0821; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0954; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0736; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0869; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1053; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1271; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0826; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Twist Lock Receptacles; Receptacle/Part Type: Receptacle; Gender: Female; NEMA Configuration: ML-2R; Flange Style: Flanged; Amperage: 15 A; Voltage: 125 V ac; Number Of Poles: 2; Number Of Wires: 3; Maximum Cord Diameter: 15.90 mm; Resistance Features: Im
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0959; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Pipe 90 ° Street Elbow: 2″ Fitting, 304 Stainless Steel FNPT x MNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1276; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• ER: ER11 1″ OAL, ″ Overall Diam
• Sheet: Silicone Rubber, 12″ Wide, 12″ Long, Red Durometer 70, High Temperature Adhesive Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0911; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Sheet: Acetal, 1/2″ Thick, Black Rockwell M-90
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1140; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1361; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1143; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0912; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1058; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• 16 oz Spray Bottle White, Polyethylene, Propropylene
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0827; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1011; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Acorn Nuts; System of Measurement: Inch; Material: Nylon; Thread Size: #6 - 32; Thread Standard: UNC
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1277; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1144; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Diamond Pattern Router Bit: 30 mm LOC, 10 mm Shank Dia, Burr Micro Grain Carbide, Diamond Finish
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1186; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• 400 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 48; Control Circuit Voltage: 48 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Circular Pin Terminals; Amperage: 10; Number
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1188; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Leak Diverters; Diverter Type: Roof Leak Diverter; Shape: Rectangular; Length (Feet): 7.00; Width (Feet): 3; Material: Polyethylene; Thickness (mil): 10 mil; Height (Inch): 0.01 in; Height (Feet): 0.01 in; Thickness: 10 mil; Overall Length: 7.00; Overall
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0823; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Leak Diverters; Diverter Type: Roof Leak Diverter; Shape: Rectangular; Length (Feet): 7.00; Width (Feet): 3; Material: Polyethylene; Thickness (mil): 10 mil; Height (Inch): 0.01 in; Height (Feet): 0.01 in; Thickness: 10 mil; Overall Length: 7.00; Overall
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1013; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1170; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1146; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1279; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1364; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0829; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0914; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Taper Length Drill Bit: 0.2205″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1012; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Black Tee: 1-1/4 x 1/2 x 1-1/4″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1160; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1363; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1145; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1278; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0828; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0913; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Taper Shank Drill Bit: 0.6094″ Dia, 2MT, 118 °, High Speed Steel Oxide Finish, 8.75″ OAL, Spiral Flute
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1015; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1190; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• #2 Screw 9/16″ OAL 0.09″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1366; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• #6 Screw 9/16″ OAL 0.14″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1233; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0916; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Sheet: Neoprene Rubber, 12″ Wide, 24″ Long, Black Durometer 45 to 55
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1148; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Sheet: Neoprene Rubber, 12″ Wide, 24″ Long, Black Durometer 50 to 60
• #10-32, 7/8″ OAL, 1/2″ Across Flats, Aluminum Female Hex Circuit Board Standoff Fully Threaded, Grade T-3, Uncoated
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1014; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Lockout & Do Not Operate Tag: Rectangle, 1.75″ High, Paper, ″Out of Service;Danger/Warning″ - English
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1180; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Button Handle, 8 mm Pin Dia, 25 mm Usable Length 48.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1147; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1232; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1365; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0915; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Black Tee: 1-1/4 x 1 x 3/4″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0772; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Buna-N Foam: 12″ Wide, 24″ Long, Black Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0720; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Extra Length Drill Bit: 0.185″ Dia, 130 °, High Speed Steel Uncoated, 4.9213″ Flute Length, 7.2835″ OAL, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1316; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Polypropylene Disposable 100 Micron Filter Cartridge
• Die Drill Bit: 0.1520″ Dia, 135 °, Solid Carbide Uncoated, 5/8″ Flute, 2″ OAL, Series 200
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1401; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• 150 Grit Silicon Carbide Rectangular Polishing Stone Very Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0771; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0710; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1315; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0992; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0740; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Metal Push-To-Connect Tube Fittings; Fitting Type: 45 ™ EL SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 5/8; Fitting Shape: 45 ™ Elbow; Maximum Working Pressure (Psi
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1091; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Metal Push-To-Connect Tube Fittings; Fitting Type: 45 ™ EL SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/2″; Tube Outside Diameter: 5/8; Fitting Shape: 45 ™ Elbow; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Stand
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1318; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0774; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0773; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Welded Bandsaw Blade: 7' 9-1/2″ Long, 1/4″ Wide, 0.025″ Thick, 4 TPI Carbon Steel, Toothed Edge
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0991; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0730; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1059; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1150; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1362; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0872; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0873; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0788; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0963; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0878; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1195; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1062; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 6; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1196; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 6; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1063; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0961; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 8; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0743; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0876; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Flap Disc: 7/8″ Hole, 120 Grit, Ceramic, Compact Coated, Fiber-Backed, 13,300 RPM
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 8; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1281; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1193; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Book Ends & Book Supports; Clip Board Type: Bookends; Size: 5-1/2x4-3/4x6; Color: Gray; Size: 5-1/2x4-3/4x6
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0744; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1