Products

• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0895; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Sheet: Nylon 6/6, 3/8″ Thick, Black Rockwell M-85
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0894; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0761; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Pipe Fitting: 2″ Fitting, 316 Stainless Steel 150 psi
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1218; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Disc Backing Pad: 4-1/2″ Dia, Disc Backing Pad 13,300 Max RPM
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1303; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0850; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1305; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Cut, Puncture & Abrasive-Resistant Gloves: Size M, ANSI Cut A5, ANSI Puncture 3, Leather Natural, HPPE Lined, Thermoplastic Elastomer Back, ANSI Abrasion 3
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0830; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Downlights; Overall Width/Diameter (Decimal Inch): 6.46; Housing Type: Aluminum; Standard; Insulation Contact Rating: NonIC Rated; Lamp Type: LED; Voltage: 120; Overall Width/Diameter (Inch): 6.46
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1219; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0892; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1304; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• M6x1, 26.7mm OAL, 13mm Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 14mm Body Length, 12.7mm Thread Length, 8.2mm Thread Depth, Grade T-3, Uncoated
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0840; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Jackets & Coats; Garment Style: Jacket; Size: X-Large; Gender: Men's; Material: 150D Polyester; PVC; Closure Type: Snaps; Seam Style: Sealed; Material Weight: 13 oz; Features: Flame ™Resistant; Chemical Resistant; Waterproof; Mildew Resistant; Soft; Suppl
• CD & DVD Case: Use with CD & DVD
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0893; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0903; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0818; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1353; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1268; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Deep Groove Ball Bearing: Bearing Number R20-X54-2RS
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1135; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• DOT Conspicuity Tape; Color: White; Tape Material: Reflective Sheeting; Width (Inch): 3; Length (Feet): 15
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1002; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 4.20; Groove Width (mm): 1.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Material Grade: Submicron; Maximum Hole Depth (mm): 10.00; Projection (mm): 1.900; Ma
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0904; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 4.20; Groove Width (mm): 1.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Material Grade: Submicron; Maximum Hole Depth (mm): 10.00; Projection (mm): 1.900; Ma
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1269; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 4.20; Groove Width (mm): 0.79; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Material Grade: Submicron; Maximum Hole Depth (mm): 10.00; Projection (mm): 1.960; Ma
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1348; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 120; Control Circuit Voltage: 120 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Flat Pin; Amperage: 10; Number Of Pins: 14
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0819; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Black Countersunk Square Plug: 1-1/4″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1221; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1354; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 48; Control Circuit Voltage: 48 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Flat Pin; Amperage: 10; Number Of Pins: 14
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1136; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Taper Length Drill Bit: 0.2402″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1003; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Masking Tape: 144 mm Wide, 55 m Long, 4.4 mil Thick, Tan Crepe Paper, Rubber Adhesive, 19 lb/in Tensile Strength
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1215; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Taper Length Drill Bit: 0.3740″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0901; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1266; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Tool & Cutter Grinding Wheels; Wheel Type: Cup Wheel; Wheel Diameter (Inch): 4 in; Abrasive Material: Diamond; Grade: Super Fine; Grit: 0; Maximum Rpm: 15000.000; Face Width (Inch): 0.75 in; Hole Thread Size: 5/8-11
• Sheet: SBR Rubber, 6″ Wide, 24″ Long, Black Durometer 60, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1399; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0949; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0816; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Bar: Acrylonitrile Butadiene Styrene, 3/4″ Thick, Beige Rockwell R-105
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1048; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Bar: Acrylonitrile Butadiene Styrene, 3/4″ Thick, Beige Rockwell R-105
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1351; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1280; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0902; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1049; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Sheet: Acetal, 1/2″ Thick, 6″ Long, Black, 8,500 psi Tensile Strength Rockwell M-90
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0817; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Oxygen/Acetylene Torch Tips; Type: Cutting Tip; Tip Number: 0; Model Compatibility: C-9 Tip Cleaner; V-Series and Victor Style Torches; Gas Type: Acetylene; Nozzle Type: One Piece; Type: Cutting Tip; Tip Type: Cutting Tip; Compatible Gas: Acetylene
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1133; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1267; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1001; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1007; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Sheet: Garolite, 1/4″ Thick, 6″ Long, Green, 37,000 psi Tensile Strength Rockwell M-110
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1358; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0905; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1137; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1004; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1355; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1005; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0906; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1223; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1356; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Button Handle, 5 mm Pin Dia, 70 mm Usable Length 91.1 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1138; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0943; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0725; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0858; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1222; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0908; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1225; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1175; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1042; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1393; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1224; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0907; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1220; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0944; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0811; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1357; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1006; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1139; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1352; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 2.0000; Outside Diameter: 4.0000; Wall Thickness (Inch): 1/32; Material: Santoprene; Standard Coil Length (Feet): 25; Maximum Working Pressure (psi): 15; Hardness: 55A; Maximum Temperature (F) ( - 0
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1134; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 230; Control Circuit Voltage: 230 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.17; Maximum Power Rating (VA): 2500; Socket Connection Type: Flat Pin; Amperage: 10; Number Of Pins: 14
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1290; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Push-to-Connect x MNPT & Tube to Male NPT Tube Fitting: Male Elbow, 1/16″ Thread, 1/8″ OD Nickel-Plated Brass, 300 psi
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1347; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• 3/8″ Screw 1/4″ OAL 0.38″ ID x 3/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1214; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Hex Head Cap Screw: 9/16-12 x 3-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0891; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1129; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Face Solid Carbide, 3/16″ Shank Dia, 0.025″ Groove Width
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0820; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Face Solid Carbide, 1/8″ Shank Dia, 0.03″ Groove Width
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0900; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1217; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• #8 Stud, 22 to 18 AWG Compatible, Partially Insulated, Crimp Connection, Locking Fork Terminal Nylon Insulation, Red, 600 Volts, Copper Contacts
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1302; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0810; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0800; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1301; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1349; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1216; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1085; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Hand Hex & Torx Bit Sockets; Socket Type: Hex Bit Socket; Tool Type: Hex Bit Socket; Hex Size (mm): 14.000; Bit Length (Inch): 2-3/4; Bit Length: 2.75 in; Insulated: No; Material: Steel; Finish: Chrome-Plated; Overall Length (Inch): 2-3/4 in; Non-sparking
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1200; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Buna-N Foam: 2″ Wide, 120″ Long, Black Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0777; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Way Oil: 55 gal Drum SAE 80, ISO 68
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0862; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Traffic Barrels, Delineators & Posts; Type: Vertical Panel; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 14-3/4; Additional Information: Sheeting Grade: Engineer; Stripe Width: 4 in; Series: 4100; Subbrand: Gemstone ™; Sign Dim
• Plastic Sheet: Acetal, 3/8″ Thick, White Rockwell M-90
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0995; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1045; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1396; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Welding Helmet Accessories; Compatibility: 3M Speedglas Heavy-Duty Welding Helmet G5-01; Adjustment: Non-Adjustable; Color: Black
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1178; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Spot Welder Tips; Tip Type: Double Bend Tip D Nose (Offset); Material: RWMA Class 3 - C18000; Type: Double Bend Tip D Nose (Offset)
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1263; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Threaded Rod: 3/8-16, 6' Long, Stainless Steel, Grade 304 (18-8)
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1250; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Safety Glass: Anti-Fog, Polycarbonate, Gray Lenses, Full-Framed, UV Protection Clear Frame, Dual, Adjustable
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0770; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0863; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1300; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Button Handle, 12 mm Pin Dia, 80 mm Usable Length 109.5 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0778; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Button Handle, 12 mm Pin Dia, 70 mm Usable Length 99.5 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1095; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1092; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Button Handle, 12 mm Pin Dia, 60 mm Usable Length 89.5 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• #8 Screw 13/16″ OAL 0.166″ ID x 5/16″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0776; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• #10 Screw 13/16″ OAL 0.192″ ID x 5/16″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1093; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• 1/4″ Screw 5/16″ OAL 0.252″ ID x 5/8″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0861; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0951; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0733; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1183; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Taper Length Drill Bit: 0.3594″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 40, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1098; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1 G
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0866; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• 12' Orange & White Traffic Cone Bar Plastic, For Use with Traffic Cones
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0999; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• 12' Black & Yellow Traffic Cone Bar Plastic, For Use with Traffic Cones
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 40, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0952; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Pack of 100 One Size Fits All, Flame Resistant, Polypropylene Hoods White
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0760; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0867; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0734; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1100; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1051; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1184; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1099; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0994; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0750; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0993; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1319; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0775; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Strip: Buna-N Rubber, 1″ Wide, 120″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0780; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0996; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Black Union: 1″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1094; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0728; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0813; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Hot & Cold Packs; Pack Type: Cold; Unitized Kit Packaging: No
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0946; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Ball Grip Quick-Release Pin: T-Handle, 5/16″ Pin Dia, 2″ Usable Length 3-1/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1177; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Sheet: Polycarbonate, 1/8″ Thick, Black, 9,000 psi Tensile Strength Rockwell R-120
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1395; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1262; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Visual Signal Device Accessories; Signal Device Accessory Type: Rocker Switch
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1240; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Sheet: Neoprene Rubber, 24″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1044; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0727; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0945; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Plastic Sheet: Nylon 6/6, 1/2″ Thick, Black Rockwell M-85
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0812; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 1.1; Control Circuit Voltage: 6 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.5; Maximum Power Rating (VA): 2500; Socket Connection Type: Faston Pin; Amperage: 10; Number Of Pins: 5
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1270; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Compression Packing; Material: Graphite; Size: 3/8; Spool Length: 5; Color: Gray; Maximum Working Pressure (psi): 6500; 6500.0 psi; PSC Code: 5330; Color: Gray; Material: Graphite; Maximum Working Pressure: 6500.0 psi; Material: Graphite
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1047; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1398; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1132; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1265; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 48; Control Circuit Voltage: 48 VDC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.12; Maximum Power Rating (VA): 1500; Socket Connection Type: Flat Pin; Amperage: 6; Number Of Pins: 8
• General Purpose Relays; Relay Type: Standard; Coil Voltage: 1.1; Control Circuit Voltage: 230 VAC; Terminal Type: Plug-in; Minimum Power Rating (VA): 0.05; Maximum Power Rating (VA): 1250; Socket Connection Type: Faston Pin; Amperage: 5; Number Of Pins: 8
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0815; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0948; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Die Drill Bit: 0.2280″ Dia, 140 °, Solid Carbide Uncoated, 1-5/16″ Flute, 2-7/16″ OAL, Series 106
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1264; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Ring Handle, 5/8″ Pin Dia, 5″ Usable Length 6.84″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1046; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Flags; Type: POW MIA Flag; Flag Type: Military Flag; Mounting: Pole Sleeve; Pole; Flag Height (Inch): 3.0 ft; Flag Height (Feet): 3.00; Overall Length: 5 ft; Flag Width (Feet): 5.00; Material: Nylon; Flag Construction: Printed; Color: White; Black; Includ
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1179; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1131; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1260; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1397; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0729; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0947; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Natural Automatic Dishwasher Gel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0814; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Hex Drive & Slotted Drive Threaded Inserts; Product Type: Knife; System of Measurement: Inch; Thread Size: #10-32; For Material Type: Wood; Material: Stainless Steel; Overall Length (Decimal Inch): 0.5000; Insert Diameter (Decimal Inch): 0.3750; Hole Diam
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1210; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1392; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• #6-32, 5/8″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 3/8″ Body Length, 1/4″ Thread Length, 3/16″ Thread Depth, Grade 303, Uncoated
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1089; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• #2 Screw 1-1/4″ OAL 0.09″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1041; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• #4 Screw 1-1/4″ OAL 0.115″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1174; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0857; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0724; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Taper Length Drill Bit: 0.3937″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0942; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1391; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Welding Gloves: Size Large, Uncoated, Stick Welding Application Yellow & White, 14″ OAL, Uncoated Coverage, Smooth Grip
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1173; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Button Handle, 9/16″ Pin Dia, 3″ Usable Length 4.41″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +.00002/-.00000; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1088; Calibrated: No; Traceability Certification Included: No; Go/No Go: No Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Button Handle, 9/16″ Pin Dia, 2-1/2″ Usable Length 3.91″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Ball Grip Quick-Release Pin: L-Handle, 10 mm Pin Dia, 25 mm Usable Length 61.8 mm OAL, 17-4 Stainless Steel, Aluminum Handle