Products

• Corner Radius End Mill: 0.093″ Dia, 0.95″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1083″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use Tool
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use To
• Corner Radius End Mill: 5/16″ Dia, 1″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Taper Length Drill Bit: 0.0492″ Dia, 130 ° Bright/Uncoated, 2.5625″ OAL, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Deep Groove Ball Bearing: 1,176 lb Static Load
• Corner Radius End Mill: 1/32″ Dia, 5/32″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Deep Groove Ball Bearing: 1,176 lb Static Load
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.093″ Dia, 0.95″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.062″ Dia, 5/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Ball End Mill: 0.047″ Dia, 0.141″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Manual Hold-Down Toggle Clamp: Horizontal, 750 lb Capacity, U-Bar, Flanged Base 59 ° Handle Movement, 93 ° Bar Opening, Steel
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 9/64'' Dia, 1/2'' LOC, 3/16'' Shank Dia, 2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.03″ Dia, 0.045″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Knob Locksets
• Threaded Pipe Sealants
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D8 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D6 Series 14101
• 3/16″ Head Diam, 3/16″ Shank Diam, 4 Flute 120° Solid Carbide Countersink Bright Finish, 2″ OAL, Double End, Straight Shank, Right Hand Cut
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D7 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D7 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D8 Series 14101
• Pipe Fitting: 3/4 x 3/4″ Fitting, 304 Stainless Steel 150 psi
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D6 Series 14101
• Ink: Black Use with PIXMA MG6822 White, Silver Wireless, PIXMA MG7720 Red Wireless, PIXMA TS6020 Printer Black, PIXMA TS6020 Gra
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D4 Series 14101
• Spot Welder Tips; Tip Type: Double Bend Tip D Nose (Offset); Material: RWMA Class 2 - C18200; Type: Double Bend Tip D Nose (Offset)
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D4 Series 14101
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 4.50; Maximum Range (mm): 5.00
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, PM Cobalt, SUPER-B Finish 8″ Thread Length, 3.937″ OAL, Right Hand Flute, Right Hand Thread, H3, Series E812
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 13.50; Maximum Range (mm): 14.00
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, 3B, HSS-E, GLT-1 Finish 3.1496″ OAL, Right Hand, H3, Series BU20C310
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 11.50; Maximum Range (mm): 12.00
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 11.00; Maximum Range (mm): 11.50
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 10.50; Maximum Range (mm): 11.00
• Strip: Neoprene Rubber, 3/4″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 14.50; Maximum Range (mm): 15.00
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 10.00; Maximum Range (mm): 10.50
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 14.00; Maximum Range (mm): 14.50
• Strip: Buna-N Rubber, 1″ Wide, 120″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 9.50; Maximum Range (mm): 10.00
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 9.00; Maximum Range (mm): 9.50
• Toilet, Urinal, Blocks & Screens; Material: Plastic; Scent: Cherry; Contains Paradichlorobenzene: No; Color: Red; Product Size (oz.): 3.50
• Spiral Flute Tap: #6-40, UNF, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-8 Finish 2.205″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50S800
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 13.00; Maximum Range (mm): 13.50
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 12.50; Maximum Range (mm): 13.00
• Retention Knob: CAT40, 5/8-11 Thread, 60 ° Angle Radius, 0.59″ Knob Dia 2.25″ OAL
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 8.50; Maximum Range (mm): 9.00
• ER16 Spanner Wrench For Use with ER Hex Nuts
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 12.00; Maximum Range (mm): 12.50
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 8.00; Maximum Range (mm): 8.50
• Square End Mill: 3mm LOC, 1mm Shank Dia, 50mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 7.50; Maximum Range (mm): 8.00
• Square End Mill: 4.5mm LOC, 1.5mm Shank Dia, 50mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 15.00; Maximum Range (mm): 15.50
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 2.50; Maximum Range (mm): 3.00
• Retention Knob: M8 x 1.25 Thread, 16 mm Knob Dia
• Ball End Mill: 0.07″ Dia, 0.105″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.08″ Dia, 0.24″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 7.00; Maximum Range (mm): 7.50
• Dead Centers; Center Type: Half Center; Shank Type: Morse Taper; Shank Taper Size: MT2; Point Style: Center; Carbide-Tipped: No; Head Diameter (Decimal Inch): 0.7100; Overall Length (mm): 100.00; Included Angle: 60; Overall Length: 100 mm
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 6.50; Maximum Range (mm): 7.00
• Ball End Mill: 0.09″ Dia, 0.27″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 6.00; Maximum Range (mm): 6.50
• Corner Radius End Mill: 1/4″ Dia, 2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 5.50; Maximum Range (mm): 6.00
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.2″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 5.00; Maximum Range (mm): 5.50
• Corner Radius End Mill: 1/4″ Dia, 2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 10' Long x 8' Wide, 12 mil Polyethylene, Rectangle
• Square End Mill: 3/16'' Dia, 0.285'' LOC, 3/16'' Shank Dia, 2'' OAL, 5 Flutes, Solid Carbide Single End, TiB2 Finish, 50 ° Variable Helix, RH Cut, RH Flute
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 4.00; Maximum Range (mm): 4.50
• Square End Mill: 1/16'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 3.50; Maximum Range (mm): 4.00
• #6-32, 2-1/4″ OAL, 5/16″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 2″ Body Length, 1/4″ Thread Length, 3/8″ Thread Depth, Grade T-3, Uncoated
• Engraving Cutter: 600 °, 1/4″ Dia, 0.03″ Tip Dia, Tipped Off Point, Solid Carbide AlTiN Nano Finish, 0.19″ LOC, 1/4″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Hardened Steel
• M3x0.50, 9.76mm OAL, 4.5mm Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 5mm Body Length, 4.76mm Thread Length, 1.9mm Thread Depth, Grade 6/6, Uncoated
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 3.00; Maximum Range (mm): 3.50
• Engraving Cutter: 600 °, 1/4″ Dia, 0.005″ Tip Dia, Tipped Off Point, Solid Carbide AlTiN Nano Finish, 0.212″ LOC, 1/4″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Hardened Steel
• M4x0.7, 17.53mm OAL, 6mm Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 8mm Body Length, 9.53mm Thread Length, 11.1mm Thread Depth, Grade 360, Zinc-Plated
• Engraving Cutter: 900 °, 1/4″ Dia, 0.005″ Tip Dia, Tipped Off Point, Solid Carbide AlTiN Nano Finish, 0.122″ LOC, 1/4″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Hardened Steel
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 15.50; Maximum Range (mm): 16.00
• #4 Screw 5/8″ OAL 0.115″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• Corner Radius End Mill: 0.1″ Dia, 1/2″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• General Purpose Work Gloves: X-Large, Durahide DRY, Sherpa & C40 3M Thinsulate Black & Gray
• General Purpose Work Gloves: Small, TrekDry, Thermoplastic Elastomer & Synthetic Leather Gray
• Chucking Reamer: 0.074″ Dia, 1-3/4″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• General Purpose Work Gloves: Large, Fleece, Nylon, Leather, Thinsulate & Thermoplastic Elastomer Black & Gray
• Wall Plates; Wall Plate Type: Blank Wall Plates; Wall Plate Configuration: Blank Center Panel; Shape: Rectangle; Wall Plate Size: Standard; Number of Gangs: 1; Overall Length (Inch): 4-9/16; Overall Width (Decimal Inch): 2-13/16; Overall Length (Decimal I
• General Purpose Work Gloves: Small, TrekDry, Thermoplastic Elastomer & Synthetic Leather Brown
• General Purpose Work Gloves: Small, TrekDry, Thermoplastic Elastomer & Synthetic Leather Black
• Vacuum Cleaner Filters; Filter Type: General Purpose Filter; Application: Wet Pick-Up Only; For Use With 2: Ridgid Wet/Dry Vacuums 5-18 Gal; Compatible Vacuum Capacity: 10 gal (US); 12 gal (US); 16 gal (US); 6 gal (US); 8 gal (US); 5.00 gal (US); Package
• Die Drill Bit: 0.2205″ Dia, 135 °, Solid Carbide Coated, Series 200
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 3.0200; Material: Steel
• Pneumatic & Valve Lockouts; Type: Gate Valve Lockout; Valve Lockout Type: Gate Valve; Maximum Valve Handle Size (Inch): 2-1/2; Maximum Pipe Diameter (Inch): 2-1/2; Minimum Valve Handle Width: 1 in; Minimum Valve Handle Size (Inch): 1; 1 in; Minimum Pipe D
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Metalworking Fluids & Coolants
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Metal Flareless Bite Type Tube Fittings; Outside Diameter (mm): 6; Fitting Type: 90 Elbow; Material: Steel; Thread Standard: BSPP; Tube Outside Diameter: 6 mm; Maximum Working Pressure: 100 bar; Thread Size: 1/8 in; 1/8; Thread Type: BSPT; PSC Code: 4720;
• Chucking Reamer: 0.3543″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, Cobalt 6 Flute
• Traffic Barrels, Delineators & Posts; Type: Handle Top Delineator; Material: LDPE; Reflective: Yes; Base Needed: Yes; Height (Inch): 28; Width (Inch): 4-1/2; Additional Information: Sub Brand: Watchtower ™; Sheeting Grade: Engineer; Stripe Color: White; D
• Stainless Steel Pipe Nipple: 1/4" Pipe, Grade 304
• #4-40, 0.437″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1/4″ Body Length, 3/16″ Thread Length, 1/8″ Thread Depth, Grade 316, Passivated
• Plastic Sheet: High Density Polyethylene, 1/4″ Thick, Black Shore D-60
• M10 Screw 15mm OAL 10mm ID x 16mm OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Tapcon next generation technology with star drive increases productivity by maintaining drive engagement during installation. Star drive eliminates bit slip for 3/16″ Star Flat Head Tapcon. Tapcon Concrete Anchors Blue Climaseal
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• Collet Wrenches; Collet Series: ER11; Head Material: Steel; Handle Material: Steel
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 10.5700; Material: Steel
• Pipe Hose Barb Adaptor: 1/2″ Fitting, 316L Stainless Steel BSPT, 290 psi
• M5x0.8 Coarse 25mm Long Pozi Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Ball Grip Quick-Release Pin: T-Handle, 3/8″ Pin Dia, 1/2″ Usable Length 1.84″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Square End Mill: 0.055'' Dia, 0.165'' LOC, 1/8'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 3.0200; Material: Steel
• Corner Radius End Mill: 3/8″ Dia, 5/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Strip: Neoprene Rubber, 4″ Wide, 120″ Long, Black Durometer 70, Plain Backing
• Sheet: Neoprene Rubber, 6″ Wide, 6″ Long, Black Durometer 50, Plain Backing
• Square End Mill: 3/16'' Dia, 13/64'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Cut & Abrasion-Resistant Gloves: Size S, ANSI Cut A5, Urethane, HPPE Light Blue, Palm Coated, ANSI Abrasion 4
• Miniature Manual Ball Valve: Full Port, Brass 2-Way Flow & In-Line, Compression x Compression, 1,000 psi WOG
• Chucking Reamer: 0.0795″ Dia, 1-3/4″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Straight Flutes Tap: 3/4-10, UNC, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, Bright/Uncoated 2″ Thread Length, 4-1/4″ OAL, Right Hand, H3, Series 726
• Straight Flutes Tap: 3/4-10, UNC, 4 Flutes, Plug, 2B & 3B, High Speed Steel, Bright/Uncoated 2″ Thread Length, 4-1/4″ OAL, Right Hand, H3, Series 727
• Straight Flutes Tap: 3/4-10, UNC, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, Bright/Uncoated 2″ Thread Length, 4-1/4″ OAL, Right Hand, H3, Series 727
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 3/8″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• M3x0.50, 9.76mm OAL, 6mm Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 5mm Body Length, 4.76mm Thread Length, 1.9mm Thread Depth, Grade 360, Zinc-Plated
• Plastic Sheet: Garolite, 1/32″ Thick, Brown, 12,000 psi Tensile Strength Rockwell M-100
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Plastic Sheet: Garolite, 1/32″ Thick, Yellow, 40,000 psi Tensile Strength Rockwell M-110
• Compression Tube Field Attachable Seal-Lok: Tube Ends O-Ring Face Seal & Flat-Face Steel
• M2.5 Screw 14mm OAL 2.7mm ID x 4.5mm OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Profile Boring Bar: 0.8 mm Min Bore, 4 mm Max Depth, Right Hand Cut, Fine Grain Solid Carbide 4 mm Shank Dia, 25 mm OAL, 0.15 mm Corner Radius
• 19.1mm Shank Length, 24, 28, 32mm Slot Width, 20mm Shank Diam, Alloy Steel Sine Fixture Key 40mm Head Length x 24mm Head Width x 11.1mm Head Thickness
• Turning Insert
• Ball Grip Quick-Release Pin: Button Handle, 8 mm Pin Dia, 15 mm Usable Length 38.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Modular Vises & Components; Component Type: Base (Low Profile); Base; System Compatibility: Panavise; Model Number: 308
• Milling Insert: XOHX 082006-FM5 CTPP216, CTPP216, Solid Carbide N/A Finish,
• Ball Grip Quick-Release Pin: Button Handle, 8 mm Pin Dia, 20 mm Usable Length 43.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Button Handle, 8 mm Pin Dia, 10 mm Usable Length 33.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Square End Mill: 5/64'' Dia, 13/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 10.5700; Material: Steel
• Ball Grip Quick-Release Pin: L-Handle, 12 mm Pin Dia, 60 mm Usable Length 96.8 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: AlTiN; Seri
• Square End Mill: 0.009'' Dia, 0.013'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Washroom Shelves, Soap Dishes & Towel Holders; Material: Metal; Shelf Length: 9.5 in; Shelf Width: 3.39 in; Shelf Depth: 4.43 in; Material: Metal; Depth (Inch): 4.43 in
• Square End Mill: 21/64'' Dia, 1/2'' LOC, 3/8'' Shank Dia, 2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Plastic Bar: Polycarbonate, 1/4″ Thick, Clear
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 8; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Chamfer Mill: 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Quick-Change Disc: 5″ Disc Dia, Silicon Carbide, Non-Woven Dark Blue, Cloth Backed, 7,650 RPM
• Chamfer Mill: 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Spot Welder Tips; Tip Type: Straight Tip E Nose (Truncated); Material: RWMA Class 1 - C15000; Type: Straight Tip E Nose (Truncated)
• Plastic Sheet: Nylon 6/6, 3/4″ Thick, Black Rockwell M-85
• Indexable Drill Insert: TOGT09G IC908, Carbide Coated, 60 ° Triangle
• Indexable Drill Insert: TOGT10G IC908, Carbide Coated, 60 ° Triangle
• Indexable Drill Insert: TOGT07G IC908, Carbide Coated, 60 ° Triangle
• Indexable Drill Insert: TOGT08G IC908, Carbide Coated, 60 ° Triangle
• Laydown Threading Inserts; Insert Style: 16ER; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1115; Thread Type: External; Pitch (mm): 2.00; Thread Standard: Trapez; Insert Hand: Right Hand; Included Angle: 30; Series: 16ER; C
• Cut-Off Inserts; Insert Style: GDG; Insert Size Code: 2020; Insert Material: Solid Carbide; Manufacturer Grade: PDL025; Cutting Width (mm): 2.00; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15; Reli
• Cut-Off Inserts; Insert Style: GDG; Insert Size Code: 2520; Insert Material: Solid Carbide; Manufacturer Grade: PDL025; Cutting Width (mm): 2.50; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angl
• Profiling Insert: N123E2 S205, Solid Carbide 0.0394″ Corner Radius, Series CoroCut 1-2
• Profiling Insert: N123E2 S205, Solid Carbide 0.047″ Corner Radius, Series CoroCut 1-2
• Welded Bandsaw Blade: 11' 5″ Long, 3/4″ Wide, 0.032″ Thick, 12 TPI Carbon Steel, Toothed Edge
• Press Fit Headless Drill Bushing: HM, 21″ ID Steel
• Duct Tape: 1/2″ Wide, 2.6 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Black Tee: 1/2 x 3/8 x 3/8″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Manual Ball Valve: 1/4″ Pipe, Full Port, Bronze 2-Piece, 2-Way & In-Line, FNPT, 600 psi WOG
• Spiral Point Tap: #8-32, UNC, 2 Flutes, Plug, 2B, Powdered Metal High Speed Steel, Uncoated 13 mm Thread Length, 63 mm OAL, Right Hand, Series CoroTap 200
• Chucking Reamer: 0.1181″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Chucking Reamer: 0.065″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Chucking Reamer: 0.065″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Profiling Insert: N123L1 S205, Solid Carbide 0.1575″ Corner Radius, Series CoroCut 1-2
• Chucking Reamer: 0.066″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Thread Mill Inserts; Insert Style: TL; Insert Size Code: 25; Insert Material: Carbide; Manufacturer Grade: AH725; Thread Type: Internal & External; Internal Threads Per Inch: 14; External Threads Per Inch: 14; Series: TL25SEI; Coating Process: PVD; Conica
• Combo Drill & Countersink: #3, 1/4″ Body Dia, 118 ™, Solid Carbide AlTiN Finish, 7/64″ Point Dia, 7/64″ Point Length, 2″ OAL, Right Hand Cut, Series Combined Drill & Countersinks
• Thread Mill Inserts; Insert Style: TL; Insert Size Code: 25; Insert Material: Carbide; Manufacturer Grade: AH725; Thread Type: Internal; Internal Pitch: 2; Series: TL25DI; Coating Process: PVD; Conical: No; Primary Workpiece Material: Superalloy; Stainles
• Multi-Polymer Film Tape: 1″ Wide, 300' x 2 mil Thick 4,500 Lb/In Tensile Strength, Acrylic Adhesive, 180 ° F
• White Double-Sided Foam Tape: 1″ Wide, 4 yd Long, 62 mil Thick, Acrylic Adhesive
• Thread Mill Inserts; Insert Style: TL; Insert Size Code: 25; Insert Material: Carbide; Manufacturer Grade: AH725; Thread Type: Internal; Internal Threads Per Inch: 8; Series: TL25DI; Coating Process: PVD; Conical: No; Primary Workpiece Material: Superallo
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Press Fit Headless Drill Bushing: HM, 12.5″ ID Steel
• Square End Mill: 0.035'' Dia, 0.052'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Thread Mill Inserts; Insert Style: TL; Insert Size Code: 25; Insert Material: Carbide; Manufacturer Grade: AH725; Thread Type: Internal; Internal Threads Per Inch: 12; Series: TL25DI; Coating Process: PVD; Conical: No; Primary Workpiece Material: Superall
• Square End Mill: 7/32'' Dia, 5/8'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 10.5700; Material: Steel
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• Concave Radius Cutters; Connection Type: Shank; Cutter Material: Solid Carbide; Cutter Radius: 0.015; Finish/Coating: Uncoated; Cutter Diameter: 0.5; Cutting Width: 0.125
• Disc Backing Pad: 6″ Dia, Disc Pad 12,000 Max RPM
• Mop Handles; For Use With: Wide-Band Mesh Wet Mop Heads; Connection Type: Clamp Jaw; Handle Type: Clamp Jaw; Handle Length (Inch): 60; Handle Material: Fiberglass; Handle Style: No; Color: Red; Connector Material: Polypropylene; Handle Length: 60; Telesco
• Ball End Mill: 0.0236″ Dia, 0.0236″ LOC, 2 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Mop Handles; For Use With: Wide-Band Mesh Wet Mop Heads; Connection Type: Clamp Jaw; Handle Type: Clamp Jaw; Handle Length (Inch): 60; Handle Material: Fiberglass; Handle Style: No; Color: Yellow; Connector Material: Polypropylene; Handle Length: 60; Tele
• Flashlights; Bulb Type: LED; Type: Flashlight; Maximum Light Output (Lumens): 200; Body Type: Polycarbonate; Battery Size: AA; Body Color: Black; Rechargeable: No; Complete Light Output (Lumens): 55 (Low); 200 (High)
• Mop Handles; For Use With: Wide-Band Mesh Wet Mop Heads; Connection Type: Clamp Jaw; Handle Type: Clamp Jaw; Handle Length (Inch): 60; Handle Material: Fiberglass; Handle Style: No; Color: Blue; Connector Material: Polypropylene; Handle Length: 60; Telesc
• Hard Hat: Impact Resistant & Water Resistant, Full Brim, Class E & G, 4-Point Suspension White, HDPE
• Hard Hat: Impact Resistant & Water Resistant, Full Brim, Class E & G, 4-Point Suspension Yellow, HDPE
• Mop Handles; For Use With: Wide-Band Mesh Wet Mop Heads; Connection Type: Clamp Jaw; Handle Type: Clamp Jaw; Handle Length (Inch): 60; Handle Material: Fiberglass; Handle Style: No; Color: Black; Connector Material: Polypropylene; Handle Length: 60; Teles
• Ball Grip Quick-Release Pin: L-Handle, 3/16″ Pin Dia, 2-1/2″ Usable Length 3-3/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Mop Handles; For Use With: Wide-Band Mesh Wet Mop Heads; Connection Type: Clamp Jaw; Handle Type: Clamp Jaw; Handle Length (Inch): 60; Handle Material: Fiberglass; Handle Style: No; Color: Green; Connector Material: Polypropylene; Handle Length: 60; Teles
• Ball Grip Quick-Release Pin: L-Handle, 3/16″ Pin Dia, 3″ Usable Length 4-1/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Mop Handles; For Use With: Wide-Band Mesh Wet Mop Heads; Connection Type: Clamp Jaw; Handle Type: Clamp Jaw; Handle Length (Inch): 60; Handle Material: Fiberglass; Handle Style: No; Color: White; Connector Material: Polypropylene; Handle Length: 60; Teles
• Mop Handles; For Use With: Wide-Band Mesh Wet Mop Heads; Connection Type: Clamp Jaw; Handle Type: Clamp Jaw; Handle Length (Inch): 60; Handle Material: Fiberglass; Handle Style: No; Color: Orange; Connector Material: Polypropylene; Handle Length: 60; Tele
• Mop Handles; For Use With: Wide-Band Mesh Wet Mop Heads; Connection Type: Clamp Jaw; Handle Type: Clamp Jaw; Handle Length (Inch): 60; Handle Material: Fiberglass; Handle Style: No; Color: Purple; Connector Material: Polypropylene; Handle Length: 60; Tele
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 6 Flutes, Solid Carbide Single End, AlCrN Finish, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series SM6F
• Pipe Reducing Hex Nipple: 1/2 x 1/8″ Fitting, 316 Stainless Steel MNPT x MNPT, 7,200 psi
• #6-32, 0.531″ OAL, 3/16″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 0.281″ Body Length, 1/4″ Thread Length, 1/8″ Thread Depth, Grade 12L14, Zinc-Plated
• #10 Screw 3/4″ OAL 0.192″ ID x 5/8″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• #10-32, 1-7/8″ OAL, 3/8″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/2″ Body Length, 3/8″ Thread Length, 1/2″ Thread Depth, Grade 360, Zinc-Plated
• #2 Screw 1/2″ OAL 0.09″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• #4 Screw 1/2″ OAL 0.115″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• 1/4″ Screw 5/16″ OAL 0.252″ ID x 5/8″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Grooving Tool: Internal Solid Carbide
• VNMG332-KM 3205 Carbide Turning Insert TiCN/AI2O3/TiN Finish, 15.81mm Long, 3/8″ Inscribed Circle, 1/32″ Corner Radius, Diamond
• Square End Mill: 1/8'' Dia, 5/32'' LOC, 1/8'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series VGM5-LN
• Grooving Tool: Internal Solid Carbide
• Polyimide Film Tape: 1″ Wide, 36 yd Long, 2.5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, -40 to 500 ° F
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide