Products

• Plastic Sheet: Polyvinylchloride, 1/8″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Corner Radius End Mill: 0.015″ Dia, 0.045″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Strip: Buna-N Rubber, 1″ Wide, 120″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.025″ Dia, 0.125″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Black 45 ° Street Elbow: 1-1/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Sheet: Buna-N Rubber, 1″ Thick, 6″ Wide, 6″ Long, Black Durometer 40, Plain Backing
• Plastic Bar: Acetal, 1/8″ Thick, White
• Ball End Mill: 0.035″ Dia, 0.175″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• 30mm Shaft Diam, 28.6mm Groove Diam, Stainless Steel Metric External SH Style Retaining Ring 27.9mm Free ID, 1.6mm Groove Width x 0.7mm Groove Depth, 1.5mm Ring Thickness, Grade DIN 1.4122
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Series TC5F
• #5/0 Pin 0.0719″ Small End/0.0966″ Large End Spiral Flute High Speed Steel Taper Pin Reamer Uncoated, 1-3/16″ Flute Length, 2-3/16″ OAL, 4 Flutes, 7/64″ Diam Straight-Cylindrical Shank, LH Spiral, RH Cut
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Series TC5F
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/32″ Dia, 0.139″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Pipe Cross: 1″ Fitting, 304 Stainless Steel FNPT, Threaded, 150 psi
• #4 Screw 11/16″ OAL 0.115″ ID x 3/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• #2 Screw 11/16″ OAL 0.09″ ID x 3/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Corner Radius End Mill: 0.0591″ Dia, 0.0866″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0315″ Dia, 0.0472″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Hex Nut: 1/2-13, Grade 17-4PH Stainless Steel, Plain Finish Right Hand Thread, 3/4″ Across Flats, 2B
• Ball End Mill: 0.125″ Dia, 0.625″ LOC, 6 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 36 ° Helix, AlTiN Nano Coated, Single End
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 2.5'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.035″ Dia, 0.105″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.0472″ Dia, 0.0709″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0472″ Dia, 0.0709″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 17.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Dec
• Pressure Washer Accessories; Maximum Pressure (psi): 4000; For Use With: Most Brands; Overall Length: 32.00; Thread Type: MNPT; FPT; Thread Size (Inch): 14; Length (Inch): 32.00; Material: Stainless Steel; Brass; Material: Stainless Steel; Brass; Maximum
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Inch; Head Type: Offset; Box End Type: 12-Point; Wrench Size (Decimal Inch): 0.6250; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Le
• Ball Grip Quick-Release Pin: L-Handle, 16 mm Pin Dia, 40 mm Usable Length 83.2 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Screw Machine Length Drill Bit: 0.182″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 5″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Series TC5F
• Straight Blade Plug: Hospital, 5-20P, 125VAC, White Self-Grounded, 20A, Nylon Body, 2 Poles, 3 Wires
• Black 90 ° Elbow: 3/8 x 1/8″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Pipe Reducing Hex Nipple: 1/2 x 3/8″ Fitting, 316 Stainless Steel MNPT x MNPT, 7,200 psi
• SpyroTec 6.3mm Head Diam, 1.5mm Cut Diam, 5mm Shank Diam, 3 Flute 90° Cobalt Countersink TiAlN Finish, Single End, 5mm Straight Shank, Right Hand Cut
• Ball End Mill: 0.011″ Dia, 0.016″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 3/16'' Dia, 1-1/8'' LOC, 3/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.024″ Dia, 0.072″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.022″ Dia, 0.066″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• CNC Storage Accessories; For Use With: Vertical Cabinet Tool Holder; Description: Frame to hold shelves in the 4 compartment vertical cabinet
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/16″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Corner Radius End Mill: 5/16″ Dia, 1-5/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 1-5/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 1-5/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Traffic Barrels, Delineators & Posts; Type: Handle Top Delineator; Material: LDPE; Reflective: Yes; Base Needed: Yes; Height (Inch): 28; Width (Inch): 4-1/2; Additional Information: Sub Brand: Watchtower ™; Stripe Color: White; Dimensions: 28 in Without H
• Corner Radius End Mill: 5/16″ Dia, 1-5/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Flash Drive: Use with Mac & Windows
• Corner Radius End Mill: 5/16″ Dia, 1-5/8″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• General Purpose Limit Switches; Actuator Type: End Plunger; Voltage: 500 V (IEC); 240.00; 300 V (UL); Actuation Force: 15; Contact Form: 1NO/1NC; Switch Type: Limit; Contact Configuration: NO; NC; Switch Action: Springs Back (Momentary); Terminal Type: Sc
• Corner Radius End Mill: 0.025″ Dia, 0.075″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Weatherproof Box Covers; Electrical Box Shape: Rectangle; Number Of Outlets: 1; Resistance Features: Weather-Resistant; Housing Material: Aluminum; Finish: Aluminum Lacquer; Overall Length: 4.6000 in; Recommended Environment: Outdoor; Housing Color: Silve
• Clear Double-Sided Polyester Film Tape: 12″ Wide, 12 yd Long, 8.3 mil Thick, Acrylic Adhesive
• General Purpose Limit Switches; Actuator Type: End Plunger; Voltage: 500 V (IEC); 240.00; 300 V (UL); Actuation Force: 15; Contact Form: NC; Switch Type: Limit; Contact Configuration: NO; NC; Switch Action: Springs Back (Momentary); Terminal Type: Screw T
• Spiral Point Tap: 7/16-20, UNF & DIN 376, 3 Flutes, Plug, 2B, HSS-E, TiN Finish 20 mm Thread Length, 100 mm OAL, Right Hand, Series TC216
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Buna-N Foam: 12″ Wide, 12″ Long, Black Acrylic Adhesive Backing
• Tapered End Mill: 5 ° per Side, 0.12″ LOC, 3 Flutes, Solid Carbide, Square End 1″ Shank Dia, 1-1/2″ OAL, Uncoated, Series Miniature End Mills - Tapered - Square
• ER: ER8, 5 mm 13.6mm OAL, 8.5mm Overall Diam, 0.0004″ TIR
• Chamfer Mill: 6 mm Dia, 4 Flutes, Solid Carbide 63 mm OAL, Bright/Uncoated
• Retention Knob: CAT40, 5/8-11 Thread, 15 ° Angle Radius 2.126″ OAL
• Tungsten Electrodes; Type: E3; Diameter (Inch): 1/16; Color Code: Purple; Length (Inch): 7; Size: 1/16; PSC Code: 3438
• Ball End Mill: 0.012″ Dia, 0.036″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• ER: ER8, 3 mm 13.6mm OAL, 8.5mm Overall Diam, 0.0004″ TIR
• Ball End Mill: 0.012″ Dia, 0.036″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• ER: ER8, 3.5 mm 13.6mm OAL, 8.5mm Overall Diam, 0.0004″ TIR
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 10; Overall Length: 1.57
• Ball End Mill: 0.025″ Dia, 0.037″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.12″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Retention Knob: CAT40, 5/8-11 Thread, 45 ° Angle Radius 2.3″ OAL
• Ball End Mill: 0.1575″ Dia, 0.4331″ LOC, 2 Flute, Solid Carbide Uncoated
• Ball End Mill: 0.5512″ Dia, 1.0236″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Ball End Mill: 0.5512″ Dia, 1.0236″ LOC, 2 Flute, Solid Carbide Uncoated
• Ball End Mill: 0.1575″ Dia, 0.4331″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 1.57
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 10; End Mill Material: Solid Carbide; Overall Length: 0.98
• Traffic Barrels, Delineators & Posts; Type: Handle Top Stacker Cone; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 11; Additional Information: Series: 510; Sub Brand: Watchtower ™; Stripe Color: White; Dimensions: 42 in Without
• Corner Radius End Mill: 0.025″ Dia, 0.075″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Traffic Barrels, Delineators & Posts; Type: Handle Top Stacker Cone; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 11; Additional Information: Series: 510; Sub Brand: Watchtower ™; Stripe Color: White; Rubber Base Sold Separate
• Hazardous Material Label: ″Flammable Solid 4″, Diamond Paper
• Micro Drill Bit: 0.0115″ Dia, 140 °, Solid Carbide AlTiN Finish, RH Cut, Spiral Flute
• Cut & Puncture-Resistant Gloves: Size L, ANSI Cut A8, ANSI Puncture 5, Rubber Latex, HPPE Black & Yellow, 10″ OAL, Palm & Fingertips Coated, Coretex Lined, HPPE Back, Single Dipped Grip
• Impact Socket: 3/4″ Drive 6-Point, 50 mm OAL
• Micro Drill Bit: 140 °, Solid Carbide AlTiN Nano Finish, RH Cut, Spiral Flute, Straight-Cylindrical Shank
• Micro Drill Bit: 0.0145″ Dia, 140 °, Solid Carbide AlTiN Finish, RH Cut, Spiral Flute
• Oxygen/Acetylene Torch Nozzles
• ER: ER8, 4.5 mm 13.6mm OAL, 8.5mm Overall Diam, 0.0004″ TIR
• Ball Grip Quick-Release Pin: Button Handle, 6 mm Pin Dia, 30 mm Usable Length 52.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• Ball Grip Quick-Release Pin: Button Handle, 6 mm Pin Dia, 25 mm Usable Length 47.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Boring Bar: 2 mm Min Bore, 8 mm Max Depth, Right Hand Cut, Carbide 2 mm Shank Dia, 32 mm OAL, 0.08 mm Corner Radius
• Boring Bar: 2 mm Min Bore, 8 mm Max Depth, Right Hand Cut, Carbide 2 mm Shank Dia, 32 mm OAL, 0.05 mm Corner Radius
• Ball End Mill: 0.0472″ Dia, 0.0709″ LOC, 2 Flute, Solid Carbide 37.5 mm OAL, 3 mm Shank Dia, 20 ° Helix, nACRo Coated, Single End
• #8-32, 1-3/8″ OAL, 3/8″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 1″ Body Length, 3/8″ Thread Length, 7/16″ Thread Depth, Grade 360, Zinc-Plated
• Flashlights; Bulb Type: LED; Type: Flashlight; Maximum Light Output (Lumens): 250; Body Type: Aluminum; Battery Size: AAA; Body Color: Black; Rechargeable: No; Complete Light Output (Lumens): 40 (Low); 250 (High)
• Taper Length Drill Bit: 0.3504″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Taper Length Drill Bit: 0.3425″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Cylindrical Shank, Series 219
• Traffic Cone & Barricade Accessories; Type: Telescoping Cone Bar; Color: Orange Reflective Stripes On White Cone Bar; Weight (Lb.): 5.0000; For Use With: Traffic Cones; Length (Feet): 5.5 to 10
• Turning Insert: RNGN85S6015 KYHK15B, Ceramic AlTiN Finish, Neutral, 1″ Inscribed Circle, N/A Round, Series RNGN
• Hazardous Material Label: ″Toxic″, Diamond Paper
• Turning Insert: RNGN85P8015 KYHK15B, Ceramic AlTiN Finish, Neutral, 1″ Inscribed Circle, N/A Round, Series RNGN
• Hazardous Material Label: ″Flammable Liquid 3″, Diamond Paper
• Compression Spring: 2.174″ OD, 5.25″ Free Length 164.385 lb Max Load, 87.046 lb/in Spring Rate, Stainless Steel
• Hydraulic Hose Male Pipe Rigid Fitting: 8 mm, 1/2-14, 10,000 psi Steel, Male NPTF
• Hazardous Material Label: ″Flammable Gas 2″, Diamond Paper
• Compression Spring: 1.41″ OD, 5.75″ Free Length 242.777 lb Max Load, 217.061 lb/in Spring Rate, Stainless Steel
• Hazardous Material Label: ″Corrosive 8″, Diamond Paper
• Care Instructions Label: ″Glass″, Square, 4″ Wide, 4″ High Paper
• Taper Length Drill Bit: 0.1935″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Turning Insert: RCMM2507M0-61 T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.4920″ Corner Radius, 0.0 &deg N/A Round, Series RCMM
• Care Instructions Label: ″Fragile/Fragil″, Square, 4″ Wide, 4″ High Paper
• Taper Length Drill Bit: 0.1960″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Compression Spring: 1.293″ OD, 6″ Free Length 0.25″ Wire Dia, 261.179 lb Max Load, 265.542 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.35″ OD, 5.25″ Free Length 152.833 lb Max Load, 75.132 lb/in Spring Rate, Stainless Steel
• Care Instructions Label: ″Fragile Do Not Stack″, Square, 4″ Wide, 4″ High Paper
• Care Instructions Label: ″Fragile″, Square, 4″ Wide, 4″ High Paper
• Compression Spring: 1.88″ OD, 5.25″ Free Length 187.997 lb Max Load, 117.625 lb/in Spring Rate, Stainless Steel
• Chemical Resistant Gloves NITRIKNIT SZ11 BLU 1PR DIPPED SUPPORT GLV W/SLVS
• Turning Insert: RCMT 20 06 M0 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3937″ Corner Radius, N/A Round, Series RCMT
• Grooving Tool: Internal Solid Carbide
• Compression Spring: 2.526″ OD, 5.25″ Free Length 142.773 lb Max Load, 66.06 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.998″ OD, 6.75″ Free Length 0.225″ Wire Dia, 135.405 lb Max Load, 51.599 lb/in Spring Rate, Stainless Steel
• Grooving Tool: Solid Carbide
• Grooving Insert: TDTT TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.236″ Cutting Width, Series TDT-.00E
• Grooving Tool: Solid Carbide
• Grooving Insert: TDITT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.236″ Cutting Width, Series TDIT-.00E
• Grooving Tool: Solid Carbide
• Taper Length Drill Bit: 0.1673″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.236″ Cutting Width, Series TDT-.00E
• Grooving Tool: Internal Solid Carbide
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.236″ Cutting Width, Series TDT-.00E
• Taper Length Drill Bit: 0.1732″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Grooving Insert: TDITT TT7220, Solid Carbide TiCN Finish, Neutral, 0.236″ Cutting Width, Series TDIT-.00E
• Taper Length Drill Bit: 0.1870″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Grooving Tool: Internal Solid Carbide
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.236″ Cutting Width, Series TDT-.00E
• Grooving Tool: Internal Solid Carbide
• Taper Length Drill Bit: 0.2008″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Grooving Insert: TDTT TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.236″ Cutting Width, Series TDT-.00E
• Anti-Fatigue Mat: 3' Length, 2' Wide, 3/8″ Thick, Polyvinylchloride Pebbled & Smooth, Gray, Dry
• Grooving Insert: TDTT TT6030, Solid Carbide TiAlN Finish, Neutral, 0.236″ Cutting Width, Series TDT-.00E
• Threaded Studs; Style: Fully Threaded; System of Measurement: Inch; Thread Size: 1/2 - 20; 1/2 - 20 in; Overall Length (Inch): 1; Overall Length (Decimal Inch): 1 in; Overall Length (mm): 1 in; Material: Alloy Steel; Finish/Coating: Plain; Class: 2A; Grad
• Grooving Insert: TDITT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.236″ Cutting Width, Series TDIT-.00E
• Taper Length Drill Bit: 0.1280″ Dia, 130 ° Bright/Uncoated, 4.25″ OAL, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.236″ Cutting Width, Series TDT-.00E
• #6-32, 0.5929″ OAL, 1/4″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 0.343″ Body Length, 1/4″ Thread Length, 3/16″ Thread Depth, Grade 6/6, Uncoated
• Compression Spring: 1.41″ OD, 9.5″ Free Length 0.192″ Wire Dia, 123.786 lb Max Load, 38.946 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.175″ OD, 9″ Free Length 0.192″ Wire Dia, 145.737 lb Max Load, 63.701 lb/in Spring Rate, Stainless Steel
• M3x0.50, 12.76mm OAL, 6mm Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 8mm Body Length, 4.76mm Thread Length, 6.4mm Thread Depth, Grade 6/6, Uncoated
• Rigid Caster Wheel: Polyurethane Foam, 15.75″ Dia, 3.9375″ Wide 309 lb Capacity, Plain Bearing
• Compression Spring: 1.88″ OD, 9″ Free Length 0.207″ Wire Dia, 115.379 lb Max Load, 31.747 lb/in Spring Rate, Stainless Steel
• Turning Insert: RNMG86-61 T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.5000″ Corner Radius, 0.0 &deg N/A Round, Series RNMG
• Grooving Insert: BA, Solid Carbide TiCN Finish, Neutral, 3 mm Cutting Width, 4 mm Max Depth, Series 25606
• Puncture-Resistant Gloves: Size M, ANSI Puncture 2 Black, Smooth Grip
• Grooving Insert: GDG4020GS PR1215, Solid Carbide Megacoat, Neutral, 4 mm Cutting Width, 25.5 mm Max Depth, Series KGD
• Puncture-Resistant Gloves: Size XL, ANSI Puncture 2 Black, Smooth Grip
• Compression Spring: 1.293″ OD, 7″ Free Length 0.225″ Wire Dia, 200.667 lb Max Load, 134.626 lb/in Spring Rate, Stainless Steel
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• Grooving Insert: GMM4020200R PR905, Solid Carbide TiAlN Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series KGM
• Compression Spring: 2.233″ OD, 7.5″ Free Length 0.225″ Wire Dia, 121.973 lb Max Load, 38.88 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Duct Tape: 1/2″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Straight-Flute & Die Drill Bits
• Duct Tape: 3/4″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Square End Mill: 5/32'' Dia, 15/64'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Micro Drill Bit: 0.0437″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, TiB2 Coated
• Micro Drill Bit: 0.0417″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Corner Radius End Mill: 3/16″ Dia, 0.563″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 0.563″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3″ Shank Dia, Helix, TiB2 Coated, Corner Radius End, Centercutting
• Square End Mill: 0.0118'' Dia, 0.0197'' LOC, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Insert: SPMT1212BR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Square, 0.0472″ Corner Radius, 0.498″ Inscribed Circle, 0.1574″ Thick, 11 ° Relief
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Washroom Mirrors; Framed: Yes; Shape: Round; Mirror Type: Plastic; Theft Resistant: No; Mirror Height: 6.82 in; Includes Shelf: No; Mirror Width: 6.82 in; Mirror Thickness: 0.4 in; Frame Material: Plastic; Mirror Material: Plastic; Shelf Included: No
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• Taper Length Drill Bit: 0.1040″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1110″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1024″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Indexable Drill Insert: M30 CTPP430, Carbide TiAlN Finish, Square
• Indexable Drill Insert: M30 CTCP420, Carbide TiCN & Al2O3 Finish, Square
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, Bright/Uncoated
• Indexable Drill Insert: 01 BK7615, Carbide TiCN & Al2O3 Finish, Trigon
• Spiral Flute Tap: #8-32, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Masking Tape: 24 mm Wide, 55 m Long, 6.7 mil Thick, Green Paper, Rubber Adhesive, 25 lb/in Tensile Strength
• Cut-Off Inserts; Insert Style: QD-N; Insert Size Code: J; Insert Material: HC; Manufacturer Grade: 4425; Cutting Width (Decimal Inch): 0.1969; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angle: 7.00; Corner Radius (Decimal I
• Cut-Off Inserts; Insert Style: QD-N; Insert Size Code: J; Insert Material: HC; Manufacturer Grade: 4425; Cutting Width (Decimal Inch): 0.1969; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angle: 7.00; Corner Radius (Decimal I
• Cut-Off Inserts; Insert Style: QD-N; Insert Size Code: J; Insert Material: HC; Manufacturer Grade: 4425; Cutting Width (Decimal Inch): 0.1969; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angle: 7.00; Corner Radius (Decimal I
• Taper Length Drill Bit: 0.0700″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Taper Length Drill Bit: 0.0785″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Corner Radius End Mill: 1/8″ Dia, 3/4″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Taper Length Drill Bit: 0.0860″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Taper Length Drill Bit: 0.0890″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Corner Radius End Mill: 1/8″ Dia, 3/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Taper Length Drill Bit: 0.0935″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish 0.5″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 307
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish 0.5″ Thread Length, 3.54″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 307
• Taper Length Drill Bit: 0.0827″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish 0.5″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 307
• Indexable Drill Insert: 34 BK8425, Carbide TiAlN & TiN Finish, Square
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish 0.5″ Thread Length, 3.54″ OAL, Right Hand Flute, Right Hand Thread, H4, Series 307
• Indexable Drill Insert: 32 BK8425, Carbide TiAlN & TiN Finish, Square
• Screw Machine Length Drill Bit: 0.18″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Micro Drill Bit: 0.1122″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1043″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1083″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1024″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1181″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1142″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1004″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1102″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1161″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.1063″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Square End Mill: 1/16'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.025″ Dia, 0.037″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.055″ Dia, 0.165″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.05″ Dia, 0.15″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.075″ Dia, 0.225″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.062″ Dia, 5/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1695″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1730″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1820″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Length Drill Bit: 0.1890″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Corner Radius End Mill: 0.031″ Dia, 5/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye