Products

• Plastic Sheet: Garolite, 1/32″ Thick, Yellow, 36,000 psi Tensile Strength Rockwell M-110
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Strip: Silicone Rubber, 3″ Wide, 120″ Long, Red Durometer 40, Plain Backing
• Extra Length Drill Bit: 0.0906″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Flexible Cylinder Hone: 7 mm Max Bore Dia, 240 Grit, Silicon Carbide 7-7/8″ OAL
• Taper Length Drill Bit: 0.0571″ Dia, 118 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 667
• Blow Gun Accessories; Accessory Type: Air Gun Extension; Material: Stainless Steel; For Use With: GA44 Air Gun; Thread Standard: NPT; Thread Size: 1/4 in; Additional Information: Star-Tip Safety Extension Tube; Bent Extension; Length (Decimal Inch - 4 Dec
• Extra Length Drill Bit: 0.0748″ Dia, 118 °, High Speed Steel TiN Finish, 1.4961″ Flute Length, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Flexible Cylinder Hone: 240 Grit, Silicon Carbide 7-7/8″ OAL
• Black Tee: 1-1/4 x 3/4 x 1″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Facepiece Filter: Acid Gas Organic Vapor & Particulates TC-84A-8438, Blue
• Plastic Bar: Cast Acrylic, 1/2″ Thick, Clear Rockwell M-95
• Disposable Gloves: Size Large, 4 mil, Nitrile Blue, 9-1/2″ Length, FDA Approved, Static Dissipative
• 13″ Long Adhesive Anchoring Screen For Use with 3/4 Rods, Stainless Steel
• Flap Disc: 7/8″ Hole, 40 Grit, Zirconia Alumina, Type 29 Coated, Phenolic-Backed, 10,200 RPM
• Traffic Cones; Type: Traffic Cone With Base; Color: Fluorescent Orange; Reflective Collars: No; Height (Inch): 36; Base Width (Decimal Inch): 14.5000; Material: PVC; Compliance: MASH Compliant; MUTCD Standards; Weight (Lb.): 10.0000; Special Characteristi
• 1-8 5″ OAL Unequal Double Threaded Stud Carbon Steel, 1-3/4″ Long Thread Length, 1-1/2″ Short Thread Length
• 8″ Long Flexible Spout, Lever-Type Oiler Die Cast Zinc Pump, Steel Body, Powder Coated
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use To
• Die Drill Bit: 15/64″ Dia, 135 °, Solid Carbide Uncoated, 3/4″ Flute, 2″ OAL, Series 200
• Ball Grip Quick-Release Pin: T-Handle, 1/2″ Pin Dia, 1-3/4″ Usable Length 3.35″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use To
• Sheet: Neoprene Rubber, 1″ Thick, 6″ Wide, 6″ Long, Black Durometer 60, Plain Backing
• Grooving Tool: Full Radius Solid Carbide, 3/16″ Shank Dia, 0.02″ Groove Width
• Micro Drill Bit: 0.0197″ Dia, 140 °, Solid Carbide AlTiN Finish, RH Cut, Spiral Flute
• Compression Tube:
• Cut-Off Inserts; Insert Style: RSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Pegboard Accessory: Plastic
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• Ball Grip Quick-Release Pin: L-Handle, 10 mm Pin Dia, 70 mm Usable Length 106.8 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Cut-Off Inserts; Insert Style: RSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• Cut-Off Inserts; Insert Style: RSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Cut-Off Inserts; Insert Style: RSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Cut-Off Inserts; Insert Style: RSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• GDMS3020R025PM6DPR1225 Carbide Cutoff Insert Megacoat Finish, 6° RH Lead Angle, RH Insert, 3mm Cutting Width, 0.25mm Corner Radius, Series KGD
• Cut-Off Inserts; Insert Style: RSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• GDMS3020N-025PM PR1535 Carbide Cutoff Insert Megacoat Nano Finish, 0° Neutral Lead Angle, Neutral Insert, 3mm Cutting Width, 0.25mm Corner Radius, Series KGD
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• 13/64″ Diam 2-7/16″ Flute Length 135° Cobalt Aircraft Extension Drill Straw Finish, Straight-Cylindrical Shank, Split Point, Self-Centering, Series 677
• Cut-Off Inserts; Insert Style: GDMS; Insert Size Code: 3020; Insert Material: Solid Carbide; Manufacturer Grade: PR1215; Cutting Width (mm): 3.00; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Ang
• Cut-Off Inserts; Insert Style: GDMS; Insert Size Code: 3020; Insert Material: Solid Carbide; Manufacturer Grade: PR1215; Cutting Width (mm): 3.00; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6; Reli
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2160; Maximum Bore Depth (Decimal Inch): 0.8000; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Taper Length Drill Bit: 0.2280″ Dia, 118 ° Black Oxide Finish, 3.75″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2160; Maximum Bore Depth (Decimal Inch): 0.4000; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal I
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1960; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Flashlight Accessories; Type: Rechargeable Lithium Battery; Material: Plastic; Flashlight Trade Name Compatibility: Railhead; Color: Black; Compatible Flashlight Battery Size: AA; For Use With: FC230; KE-HFLC185
• Abrasive Belt: 3" Wide, 78-3/4" OAL, Aluminum Oxide
• Sheet: SBR Rubber, 6″ Wide, 12″ Long, Black Durometer 60, Plain Backing
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• Arc Flash Clothing Kit: Size Medium, Cotton, Coveralls & Hoods
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• PKM20L-020PM-6D GW15 Carbide Cutoff Insert Uncoated, 6° LH Lead Angle, LH Insert, 2mm Cutting Width, 0.2mm Corner Radius, Series KPK
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 7/32; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• PKM20N-020PH PR1625 Carbide Cutoff Insert Megacoat Nano Finish, 0° Neutral Lead Angle, Neutral Insert, 2mm Cutting Width, 0.2mm Corner Radius, Series KPK
• Plastic Sheet: Polyvinylchloride, 1/16″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Spray Bottles & Triggers
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Indexable Drill Insert: P28428E67 WKP35S, Carbide Coated, 96 ° Square
• Plastic Bar: Cast Acrylic, 1/4″ Thick, Clear Rockwell M-95
• Extra Length Drill Bit: 0.2756", 140 &deg, Carbide
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1980; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0050; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 1/4; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Indexable Drill Insert: P28428E67 WKP35S, Carbide Coated, 96 ° Square
• Indexable Drill Insert: P28428A57 WKP35S, Carbide Coated, 96 ° Square
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.025″ Groove Width
• Indexable Drill Insert: P28428A57 WKP35S, Carbide Coated, 96 ° Square
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.03″ Groove Width
• Indexable Drill Insert: P28428A57 WKP25S, Carbide Coated, 96 ° Square
• One Way Round, White on Green, Use for Security & Admittance
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.03″ Groove Width
• Adjustable Torque Wrench: 1/2" Drive, Square Drive, Newton Meter
• Cut & Puncture-Resistant Gloves: Size XS, ANSI Cut A4, ANSI Puncture 4, Polyurethane, HPPE Blue & Gray, Palm & Fingertips Coated, Smooth Grip
• Indexable Drill Insert: 01 BK6115, Carbide TiCN, TiN & Al2O3 Finish, Square
• Cut, Puncture & Abrasive-Resistant Gloves: Size M, ANSI Cut A4, ANSI Puncture 1, Nitrile, HPPE Black, Palm Coated, HPPE Lined, HPPE Back, Nitrile Dipped Grip, ANSI Abrasion 6
• Sheet: Buna-N Rubber, 6″ Wide, 12″ Long, Black Durometer 60, Plain Backing
• Indexable Drill Insert: 13 BK8425, Carbide TiAlN & TiN Finish, Square
• Cut, Puncture & Abrasive-Resistant Gloves: Size L, ANSI Cut A4, ANSI Puncture 1, Nitrile, HPPE Black, Palm Coated, HPPE Lined, HPPE Back, Nitrile Dipped Grip, ANSI Abrasion 6
• Indexable Drill Insert: 03 BK8430, Carbide TiAIN & TiN Finish, Square
• Sheet: Buna-N Rubber, 1″ Thick, 6″ Wide, 6″ Long, Black Durometer 60, Plain Backing
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, Square
• Spade Drill Insert: 23/32″ Dia, Series 1, Cobalt TiAlN Finish, Series T-A
• Indexable Drill Insert: 01 BK6425, Carbide TiCN, Al2O3 & TiN Finish, Square
• Indexable Drill Insert: 01 BK7710, Carbide TiB2 Finish, Square
• Soap: 15.2 oz Bottle Foam, Green, Honeysuckle Scent
• Taper Length Drill Bit: 0.0433″ Dia, 118 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 317
• Sheet: Neoprene Rubber, 6″ Wide, 6″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Rust Remover: 17.64 oz Jar 150 ° F
• Cut-Off Inserts; Insert Style: QD-N; Insert Size Code: E; Insert Material: HC; Manufacturer Grade: 4425; Cutting Width (Decimal Inch): 0.0787; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angle: 7.00; Corner Radius (Decimal I
• Self-Retracting Lifeline: 310 lb Capacity, 11.00' Lifeline
• Masking Tape: 4″ Wide, 60 yd Long, 4.4 mil Thick, Natural Crepe Paper, Rubber Adhesive, 19 lb/in Tensile Strength
• Strip: Silicone Rubber, 1/2″ Wide, 120″ Long, Red Durometer 50, Plain Backing
• Hex Head Cap Screw: 3/8-16 x 1-1/2″, Grade A-286 Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• 5/16″ Screw 3/4″ OAL 0.315″ ID x 3/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Hex Key: 10 mm Hex, Extra Long Arm 227 mm OAL, 59CrV4 Vanadium Steel
• Traffic Barrels, Delineators & Posts; Type: Handle Top Delineator; Material: LDPE; Reflective: Yes; Base Needed: Yes; Height (Inch): 42; Width (Inch): 4-1/2; Additional Information: Sub Brand: Watchtower ™; Sheeting Grade: Diamond; Stripe Width: 4 in; Ser
• Pipe Fitting: 1/2 x 3/8″ Fitting, 304 Stainless Steel 150 psi
• Micro Drill Bit: 0.0138″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Micro Drill Bit: 0.0268″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Filament & Strapping Tape; Type: Filament Tape; Color: Natural; Width (mm
• Deep Groove Ball Bearing: 68 mm OD Bearing Number 6008
• Painter's Tape & Masking Tape: 2″ Wide, 60 yd Long, 5.5 mil Thick, Green Crepe Paper, Rubber Adhesive, 21 lb/in Tensile Strength
• Taper Length Drill Bit: 0.1540″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• High Visibility Vest: Universal, General Purpose Vest, ANSI Class Non-ANSI
• General Purpose Limit Switches; Actuator Type: Roller Lever; Voltage: 500 V (IEC); 240.00; 300 V (UL); Actuation Force: 0.10; Contact Form: 1NO/1NC; Switch Type: Limit; Contact Configuration: NO; NC; Switch Action: Springs Back (Momentary); Terminal Type:
• General Purpose Limit Switches; Actuator Type: Roller Lever; Voltage: 500 V (IEC); 240.00; 300 V (UL); Actuation Force: 6; Contact Form: 1NO/1NC; Switch Type: Limit; Contact Configuration: NO; NC; Switch Action: Springs Back (Momentary); Terminal Type: Sc
• #4-40, 2.4369″ OAL, 1/4″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 2-1/4″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 360, Zinc-Plated
• Pipe Insulation Fittings; Insulation Type: Elbow; Compatible Pipe Size: 0.5 in; Material: Polyethylene; Overall Thickness: 0.375 in
• Push-to-Connect Tube Fitting: 3/4″ OD Lead Free Brass, 200 psi
• Traffic Barrels, Delineators & Posts; Type: Open Top Delineator; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 4-5/8; Additional Information: Sheeting Grade: Engineer; Stripe Width: 4 in; Stripe Color: White; Series: 6842; Post
• #6-32, 2-1/2″ OAL, 1/4″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 2-1/4″ Body Length, 1/4″ Thread Length, 3/8″ Thread Depth, Grade 360, Zinc-Plated
• Standard-Duty Shock Absorber: 3 mm Rod Dia, 16 mm OD, 12 mm Stroke, M12 x 1 Thread 70 mm OAL, 2.45 lb Force
• Pipe Insulation Fittings; Insulation Type: Tee; Compatible Pipe Size: 1.25 in; Material: Polyethylene; Overall Thickness: 0.375 in
• Eye & Eye Round Sling: 10' Long, 2600 lb Vertical Capacity, 2100 lb Choker Capacity
• Precision & Specialty Screwdrivers; Type: Screw-Holding Screwdriver; Overall Length Range: 6″-8.9″; Blade Length (mm): 12.7000; Blade Length (Inch): .50; Phillips Point Size: 0; Minimum Order Quantity: Plastic; Steel; Rubber; Material: Plastic; Steel; Rub
• Standard-Duty Shock Absorber: 3 mm Rod Dia, 16 mm OD, 12 mm Stroke, M12 x 1 Thread 70 mm OAL, 2.45 lb Force
• Threaded Studs; Style: Fully Threaded; System of Measurement: Inch; Thread Size: 1-14; Overall Length (Inch): 4; Overall Length (Decimal Inch): 4 in; Overall Length (mm): 4 in; Material: Alloy Steel; Finish/Coating: Black Oxide; Class: 2A; Grade: 8; Threa
• Standard-Duty Shock Absorber: 3 mm Rod Dia, 16 mm OD, 12 mm Stroke, M12 x 1 Thread 70 mm OAL, 2.45 lb Force
• Standard-Duty Shock Absorber: 3 mm Rod Dia, 16 mm OD, 12 mm Stroke, M12 x 1 Thread 70 mm OAL, 2.45 lb Force
• Standard-Duty Shock Absorber: 3 mm Rod Dia, 16 mm OD, 12 mm Stroke, M12 x 1 Thread 70 mm OAL, 2.45 lb Force
• Grooving Insert: ER-P-GUP-Metric GUP, KCU10B, Carbide
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 40, Plain Backing
• Pipe Fitting: 1/2 x 1/8″ Fitting, 304 Stainless Steel 4,600 psi
• #6-32, 0.7179″ OAL, 3/16″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 0.468″ Body Length, 1/4″ Thread Length, 1/4″ Thread Depth, Grade T-3, Uncoated
• Sheet: SBR Rubber, 12″ Wide, 36″ Long, Black Durometer 75, Plain Backing
• Sleeves; 22" GRY MED 1/PR CONTENDER CR/FR SLEEVE
• Plastic, Rubber & Synthetic Tube; Inside Diameter (Inch): 3/8; Outside Diameter (Inch): 5/8; Wall Thickness (Inch): 1/8; Material: PVC; Standard Coil Length (Feet): 5; Maximum Working Pressure (psi): 160; Hardness: 70A; Special Item Information: Polyester
• All-Purpose Cleaners & Degreasers
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 4″ Usable Length 5.58″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Plastic Bar: Garolite, 1/8″ Thick, Yellow
• Plastic Sheet: Garolite, 5/8″ Thick, 6″ Long, Yellow, 40,000 psi Tensile Strength Rockwell M-110
• Welding Gloves: Size 2X-Large, Uncoated, MIG Welding, Stick Welding & TIG Welding Application Black & White, Uncoated Coverage, Textured Grip
• Electronic Inside Micrometers; Minimum Measurement (Decimal Inch): 11.0000; Maximum Measurement (Decimal Inch): 12.0000; Rod Type: Solid; Thimble Type: Ratchet Stop; Resolution (mm): 0.001
• 0.67OZ BTL FRESH 2/PK SCENTED OIL REFILL Scented Oil
• Disinfectant Toilet Bowl Cleaner
• 0.67OZ FRSH LINEN 2/PK SCENTED OIL REFILL Scented Oil
• Square End Mill: 8.00 mm Dia, 20.00 mm LOC, 2 Flute, Solid Carbide
• Disinfectant Toilet Bowl Cleaner with Bleach
• Toilet Seats; Type: Luxury Closed Front w/ Slow Close; Style: Round; Material: Plastic; Color: White; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Toilet Bowl Cleaner with Hydrogen Peroxide
• Toilet Seats; Type: Open Front w/o Cover; Style: Round; Material: Plastic; Color: Biscuit; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Face Shield & Headgear: Polycarbonate, Blue, 8″ Wide
• Compression Packing; Material: ePTFE; Size: 3/16; Spool Length: 5; Color: Gray; Maximum Working Pressure (psi): 1500; 1500.0 psi; PSC Code: 5330; Color: Gray; Maximum Working Pressure: 1500.0 psi; Material: ePTFE
• Clean & Fresh Toilet Bowl Cleaner Cling Gel
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: Bone; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Rotary Disc: 3/8" Cutting Dia
• Die Drill Bit: 0.0420″ Dia, 140 °, Solid Carbide Bright Finish, 1/2″ Flute, 1-1/2″ OAL, Series 470
• Arc Flash Clothing Kit: Size X-Large, Cotton, Bib Overalls, Hoods & Jacket
• Milling Insert: ANMT1404PPPR-ML AH120 AH120, Solid Carbide
• Plastic Bar: Acetal, 1/8″ Thick, Black Rockwell M-90
• Indexable Drill Insert: P28428A57 WKP25S, Carbide Coated, 96 ° Square
• Plastic Bar: Acetal, 1/8″ Thick, White
• Indexable Drill Insert: P28428A57 WKP35, Carbide Coated, Square
• Indexable Drill Insert: P28428A57 WKP35, Carbide Coated, Square
• Open Cell Polyurethane Foam: 13″ Wide, 13″ Long, Black Acrylic Adhesive Backing
• Wire Disconnects; Gender: Female; Insulation Type: Partially Insulated; Insulation Material: Nylon; Connection Type: Crimp; Compatible Wire Size (sq mm): 0.5-1.5; Tab Width (Decimal Inch): 0.25; Tab Width (mm): 6.34 mm; 0.25 in; Color: Red; Contact Materi
• Indexable Drill Insert: P28428E67 WKP35S, Carbide Coated, 96 ° Square
• Ball Grip Quick-Release Pin: T-Handle, 3/8″ Pin Dia, 4″ Usable Length 5.34″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Indexable Drill Insert: P28428A57 WKP35S, Carbide Coated, 96 ° Square
• Hex Key:
• Ball Grip Quick-Release Pin: T-Handle, 1/4″ Pin Dia, 2-1/2″ Usable Length 3.77″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Locker:
• Black 45 ° Elbow: 1-1/2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Taper Length Drill Bit: 0.1285″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Abrasive Belt: 3" Wide, 21" OAL, 50 Grit, Aluminum Oxide
• Micro Drill Bit: 0.0728″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Engraving Cutters; Cutter Diameter (Inch): 3/16; Cutter Diameter (Decimal Inch): 0.1870; Point Shape: Tipped Off; Shank Diameter (Decimal Inch): 0.1870; Shank Diameter (Inch): 3/16
• Galvanized Steel Pipe Coupling: 1/4″ Fitting FNPT x FNPT, 6,600 psi Liquid & Gas, 6,600 psi Steam
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 1-3/4″ Usable Length 3.33″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Scissors, Forceps & Tweezers; Product Type: Forceps; Overall Length: 7.00 in; Blade Material: Stainless Steel; Handle Material: Stainless Steel; Tip Shape: Blunt; Blade Style: Curved; Disposable: No; Color: Silver
• Push-To-Connect Tube Fitting: Bulkhead Union Elbow, 5/16″ OD Polybutylene, 350 psi
• Push-To-Connect Tube Fitting: Reducing Union Polybutylene, 350 psi
• Strip: Silicone Rubber, 1/2″ Wide, 120″ Long, Red Durometer 60, High Temperature Adhesive Backing
• Indexable Drill Insert: ZCMTSU PR1225, Carbide Megacoat Finish, 0 °
• Micro Drill Bit: 0.0764″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Fiber Disc: 5" Disc Dia, Arbor Hole, 50 Grit, Zirconia Alumina
• Micro Drill Bit: 0.0701″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0697″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Chamfer Mill: 3/8" Dia, 3/8" Shank Dia, 45.00 deg, 4 Flute, Solid Carbide, Single End
• Micro Drill Bit: 0.0744″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 1-3/4″ Usable Length 3.33″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Micro Drill Bit: 0.074″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0677″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0724″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• CNC Storage Carts; Style: HSK; Taper Size: HSK80; Tool Type: HSK; Caster Type: Swivel, Fixed; Color: Dark Gray; Tool Capacity: 3600; Material: Steel; Load Capacity (Lb.
• Micro Drill Bit: 0.0768″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.072″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Plastic Bar: Polycarbonate, 1/4″ Thick, Clear
• Micro Drill Bit: 0.0717″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Strip: Buna-N Rubber, 3/4″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• Micro Drill Bit: 0.0713″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Modular Fixturing Kits; Set Type: Repair Kit; System Compatibility: Ball Lock; Number of Pieces: 6; Includes: (1) Drive Ball; (1) Replacement Screw; (1) O-Ring; (3) Locking Balls; Shank Diameter Compatibility (mm): 50.00; Plate Thickness Compatibility (De
• Micro Drill Bit: 0.076″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Arc Flash Clothing Kit: Size Small, Cotton, Coveralls & Hoods
• Micro Drill Bit: 0.0772″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Crew Bathroom Disinfectant Cleaner, 32 oz, RTU, 4/CT
• Micro Drill Bit: 0.0681″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Safety Glass: Anti-Fog, Polycarbonate, Gray Lenses, Foam Lined Smoke Frame, Traditional
• Micro Drill Bit: 0.0776″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0728″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Plastic Bar: Polytetrafluoroethylene, 3/32″ Thick, White
• Micro Drill Bit: 0.078″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Safety Glass: Anti-Fog, Polycarbonate, Clear Lenses, Foam Lined Clear Frame, Traditional
• Micro Drill Bit: 0.0732″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Caster Wheels; Wheel Diameter (Inch): 8; Mount Type: Bolt-On; Bearing Type: Ball; Wheel Width (Inch): 2; Wheel Hardness: Hard
• Micro Drill Bit: 0.0685″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Air Compressor Oil/Water Seperator System Media Kit: Use with PZD-01-55
• Plastic Sheet: Garolite, 1/8″ Thick, 6″ Long, Off-White, 18,000 psi Tensile Strength Rockwell M-100
• Black 90 ° Street Elbow: 1 x 3/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Micro Drill Bit: 0.0783″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0736″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Halogen Lamp: T3, 5200 Lumens, 300 W, Double Contact Bayonet Base 2900 K
• Micro Drill Bit: 0.0689″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0693″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0705″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0748″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0752″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0709″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0673″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0756″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Sleeve Bearings; Bearing Type: Sleeve; Outside Diameter (Inch): 2-11/16; Outside Diameter (Decimal Inch - 4 Decimals): 2.6875; Inside Diameter (Inch): 2-1/2; Inside Diameter (Decimal Inch): 2.5000
• Brass Pipe Square Head Plug: 1-1/4″ Fitting, MNPT x FNPT, Class 125, Lead Free 125 psi, Brass
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide FIREX Finish, 5 mm TPI, Series 25662
• Arc Flash Clothing Kit: Size Medium, Cotton, Jacket, Pants & Hoods
• Indexable Drill Insert: P28428A57 WKP25S, Carbide Coated, 96 ° Square
• Cable Tools & Kits; Number of Pieces: 1.0; Number Of Pieces: 1.0
• Indexable Drill Insert: P28428A57 WKP25S, Carbide Coated, 96 ° Square
• Cable Tools & Kits; Number of Pieces: 1.0; Number Of Pieces: 1.0
• Indexable Drill Insert: P28428E67 WKP35S, Carbide Coated, 96 ° Square
• Lathe Tool Holder Bushings; Bushing Type: Tool Holder Bushing (Lathe); Outside Diameter (Decimal Inch
• Indexable Drill Insert: P28428E67 WKP35S, Carbide Coated, 96 ° Square
• 12 x 12 x 1/8″ Gray Pressed Wool Felt Sheet Plain Backing, 400 psi Tensile Strength, 2 Lb/Sq Yd, SAE Grade F-3
• Indexable Drill Insert: P28428A57 WKP35S, Carbide Coated, 96 ° Square
• Indexable Drill Insert: P28428E57 WKP35, Carbide Coated, Square
• M5x0.8, 23.53mm OAL, 10mm Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 14mm Body Length, 9.53mm Thread Length, 9.6mm Thread Depth, Grade T-3, Uncoated
• Corner Chamfer End Mill: 9.00 mm Dia, 22.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Flexible Coupling: Sinter Carbon Steel, 1″ Pipe, 1.38″ OAL
• Flexible Coupling: Sinter Carbon Steel, 1-1/8″ Pipe, 1.38″ OAL
• M3x0.50, 35.76mm OAL, 4.5mm Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 31mm Body Length, 4.76mm Thread Length, 6.4mm Thread Depth, Grade 360, Zinc-Plated
• Smoke & Carbon Monoxide (CO) Alarms; Alarm Type: Smoke; Sensor Type: Ionization; Mount Type: Wall, Ceiling; Interconnectable: Interconnectable; Power Source: Wire-In with Battery Backup; Battery Chemistry: Lithium-ion; Battery Size: 9V; Batteries Included
• M2.5x0.45, 34.97mm OAL, 4.5mm Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 31mm Body Length, 3.97mm Thread Length, 4.8mm Thread Depth, Grade 360, Zinc-Plated
• Indexable Drill Insert: M30 CTPP430, Carbide TiAlN Finish, Square
• Indexable Drill Insert: M30 CTCP420, Carbide TiCN & Al2O3 Finish, Square
• Cut-Off Inserts; Insert Style: FX; Insert Size Code: 2.2; Insert Material: Carbide; Manufacturer Grade: H216T; Insert Holding Method: Wedge; Lead Angle Direction: Left Hand; Insert Hand: Neutral; Lead Angle: 90.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE BRCH; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 1/2; Fitting Shape: Tee; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards: DOT;