Products

• Hard Hat: Construction, Electrical Protection, Heat Protection, High Visibility & Impact Resistant, Full Brim, Type 1, Class E & G, 4-Point Suspension Green, High Density Polyethylene
• Hard Hat: Construction, Electrical Protection, Heat Protection, High Visibility & Impact Resistant, Full Brim, Type 1, Class E & G, 4-Point Suspension Orange, HDPE
• Oxygen/Acetylene Torch Tips; Tip Number: 1; Material: Copper; Nozzle Type: Copper
• Corner Chamfer End Mill: 5.50 mm Dia, 13.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Hard Hat: Construction, Electrical Protection, Heat Protection, High Visibility & Impact Resistant, Full Brim, Type 1, Class E & G, 4-Point Suspension Gray, High Density Polyethylene
• Plain Cam Follower: 0.25" Roller Dia, 0.134" Roller Width, 0.25" Stud Dia
• Hard Hat: Construction, High Visibility & Impact Resistant, Full Brim, Type 1, Class C, 4-Point Suspension Blue, HDPE, Vented
• Square End Mill: 4 Flute, Solid Carbide
• Hard Hat: Construction, Electrical Protection, Heat Protection, High Visibility & Impact Resistant, Full Brim, Type 1, Class G & E, 4-Point Suspension Yellow, HDPE
• Plastic Rod: Garolite (LE), 4' Long, 1/8″ Dia, Brown Rockwell M-100
• Micro Drill Bit: 0.0078″ Dia, 130 °, Solid Carbide Bright/Uncoated, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 302
• Compression Tube:
• Safety Exhaust: 1/4″ Pipe, Full Port, Brass 1-Way Flow & In-Line, Female NPT, 600 psi WOG
• Sheet: Neoprene Rubber, 6″ Wide, 6″ Long, Black Durometer 50, Plain Backing
• Plastic Bar: Polyvinylchloride, 3/8″ Thick, Dark Gray
• Garden Hose Spray Nozzles; Type: Watering Wand; Style: Thumb Control; Material: Plastic; Metal; Color: Aqua; Thread Size (Inch): 3/4; Description: 7-Pattern Watering Wand; Description: 7-Pattern Watering Wand
• Flap Disc: 4-1/2″ Dia, 5/8-11 Hole, Aluminum Oxide, Type 27 Non-Woven, Very Fine Grade, Fiberglass-Backed, 1,33,000 RPM
• Sheet: Buna-N Rubber, 6″ Wide, 12″ Long, Black Durometer 50, Plain Backing
• Flap Disc: 4-1/2″ Dia, 5/8-11 Hole, Aluminum Oxide, Type 27 Non-Woven, Fine Grade, Fiberglass-Backed, 13,300 RPM
• Flap Disc: 4-1/2″ Dia, 5/8-11 Hole, Aluminum Oxide, Type 27 Non-Woven, Medium Grade, Fiberglass-Backed, 13,300 RPM
• Push Bars; Material: Metal; Locking Type: Exit Device Only; Maximum Door Width: 3 ft; Finish/Coating: Satin Aluminum, Clear Anodized; Minimum Door Width: 3 ft
• Pipe Hex Plug: 1-1/2″ Fitting, 316 Stainless Steel MNPT, 150 psi
• Marking Flags; Type: Stake Flags; Message or Pattern: Solid; Color: White; Overall Height (Inch): 24 in; Flag Height (Inch): 3; Flag Width (Inch): 2; Post Material: Plastic; Flag Material: Plastic; Overall Height (Decimal Inch): 24; Flag Height (Decimal I
• Press Fit Headless Drill Bushing: HM, 10″ ID Steel
• Indexable Drill Insert: 01 BK62, Carbide TiN, TiCN & Al2O3 Finish, Trigon
• Corner Chamfer End Mill: 6.00 mm Dia, 13.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• 1-8, 2″ Flange Diam, 1-1/4″ High, 1-5/8″ Across Flats, Flange Nut Grade 303 Stainless Steel, 1/4″ Flange Height
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class E & G, 4-Point Suspension Blue, HDPE, Slotted
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class G & E, 4-Point Suspension Orange, HDPE, Slotted
• Laydown Threading Inserts; Insert Style: 16IR; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: GW15; Threads Per Inch: 14.00; Thread Type: Internal; Thread Standard: NPT; Insert Hand: Right Hand; Included Angle: 60; Series: 16IR;
• Corner Chamfer End Mill: 6.50 mm Dia, 19.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Laydown Threading Inserts; Insert Style: 16IR; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: GW15; Threads Per Inch: 48.00 to 16.00; Thread Type: Internal; Pitch (mm): 0.50 to 1.50; Insert Hand: Right Hand; Included Angle: 60;
• Laydown Threading Inserts; Insert Style: 16IR; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: GW15; Threads Per Inch: 14.00 to 8.00; Thread Type: Internal; Pitch (mm): 1.75 to 3.00; Insert Hand: Right Hand; Included Angle: 60; S
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class E & G, 4-Point Suspension Yellow, HDPE, Slotted
• Threading Insert:32 Size, TT Style, KW10 Grade, Carbide Grade, Carbide WC/Co Finish, 1.5-2.5 mm & 16-10 TPI
• Hard Hat: Impact Resistant & Water Resistant, Front Brim, Class E & G, 4-Point Suspension White, HDPE, Slotted
• Plastic Sheet: Polypropylene, 1/8″ Thick, 16″ Long, Semi-Clear White, 3,250 psi Tensile Strength Rockwell M-85
• Broom/Squeegee Poles & Handles; Connection Type: European Threaded; Handle Length (Decimal Inch): 26; Telescoping: No; Handle Material: Polypropylene; Color: Yellow; For Use With: Remco; Vikan Tools
• Push-To-Connect Tube to Pipe Tube Fitting: Connector, 3/8″ Thread, 3/8″ OD Kynar, 250 psi
• Welded Bandsaw Blade: 10' 10-1/2″ Long, 1/2″ Wide, 0.025″ Thick, 3 TPI Carbon Steel, Toothed Edge
• Broom/Squeegee Poles & Handles; Connection Type: European Threaded; Handle Length (Decimal Inch): 26; Telescoping: No; Handle Material: Polypropylene; Color: White; For Use With: Remco; Vikan Tools
• Cut-Off Inserts; Insert Style: GDG; Insert Size Code: 2520; Insert Material: Solid Carbide; Manufacturer Grade: PR1225; Cutting Width (mm): 2.50; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15; Reli
• Corner Chamfer End Mill: 7.00 mm Dia, 19.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Broom/Squeegee Poles & Handles; Connection Type: European Threaded; Handle Length (Decimal Inch): 26; Telescoping: No; Handle Material: Polypropylene; Color: Blue; For Use With: Remco; Vikan Tools
• Cut-Off Inserts; Insert Style: GDG; Insert Size Code: 2520; Insert Material: Solid Carbide; Manufacturer Grade: PR1225; Cutting Width (mm): 2.50; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angl
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4094; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball Grip Quick-Release Pin: L-Handle, 8 mm Pin Dia, 10 mm Usable Length 42.3 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Cut-Off Inserts; Insert Style: GDG; Insert Size Code: 2020; Insert Material: Solid Carbide; Manufacturer Grade: PR1225; Cutting Width (mm): 2.00; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angl
• Visual Signal Device Accessories; Signal Device Accessory Type: Bezel; Overall Width/Diameter (Inch): 3/32; Overall Height (Decimal Inch): 2-13/16; For Use With: FireRay LED Perimeter Lights; Overall Height (Inch): 2-13/16
• Impact Socket: 3/4" Drive, 2" Socket, Hex Drive
• Cut-Off Inserts; Insert Style: GDG; Insert Size Code: 2020; Insert Material: Solid Carbide; Manufacturer Grade: PR1225; Cutting Width (mm): 2.00; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15; Reli
• Visual Signal Device Accessories; Signal Device Accessory Type: Bezel; Overall Width/Diameter (Inch): 1-13/64; Overall Height (Decimal Inch): 5-5/16; For Use With: FireRay LED Perimeter Lights; Overall Height (Inch): 5-5/16
• Abrasive Belt: 1/2" Wide, 12" OAL, Ceramic Alumina
• Cut-Off Inserts; Insert Style: GDG; Insert Size Code: 2020; Insert Material: Solid Carbide; Manufacturer Grade: PR1535; Cutting Width (mm): 2.00; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angl
• Visual Signal Device Accessories; Signal Device Accessory Type: Bezel; Overall Width/Diameter (Inch): 1-13/64; Overall Height (Decimal Inch): 5-5/16; For Use With: FireRay LED Perimeter Lights; Overall Height (Inch): 5-5/16
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: Bone; Outside Width: 14-3/16; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Visual Signal Device Accessories; Signal Device Accessory Type: Bezel; Overall Width/Diameter (Inch): 3/32; Overall Height (Decimal Inch): 2-13/16; For Use With: FireRay LED Perimeter Lights; Overall Height (Inch): 2-13/16
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: Crane White; Outside Width: 14-3/16; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Toilet Seats; Type: Open Front Toilet Seat Less Cover with Self Sustaining Hinges; Style: Round; Material: Plastic; Color: Biscuit; Outside Width: 14-3/16; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Penetrant & Lubricant: 13 oz Aerosol Can Red, 120 ° F Operating Temp, Flammable
• 5/8″ Screw 2″ OAL 5/8″ ID x 1″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Welded Bandsaw Blade: 9' 3-3/8″ Long, 1/2″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Thread Forming Tap: 5/16-18, UNC, Modified Bottoming, High Speed Steel-CO, TiCN Finish 0.665″ Thread Length, 2.72″ OAL, H11, Series 14001
• 20″ Aluminum Snow Shovel 56″ Straight Wood Handle
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 1″ Usable Length 2.58″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Taper Length Drill Bit: 0.1110″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Thread Forming Tap: 5/16-18, UNF, Modified Bottoming, High Speed Steel-CO, TiCN Finish 0.665″ Thread Length, 2.72″ OAL, H12, Series 14001
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 1″ Usable Length 2.58″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Taper Length Drill Bit: 0.1130″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Welded Bandsaw Blade: 12' 3″ Long, 3/8″ Wide, 0.025″ Thick, 8 TPI Carbon Steel, Toothed Edge
• Taper Length Drill Bit: 0.1200″ Dia, 130 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 668
• Welded Bandsaw Blade: 12' 6″ Long, 3/8″ Wide, 0.025″ Thick, 14 TPI Carbon Steel, Toothed Edge
• Plastic Sheet: Polypropylene, 1/4″ Thick, 6″ Long, Semi-Clear White, 3,250 psi Tensile Strength Rockwell M-85
• Taper Length Drill Bit: 0.1520″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Plastic Bar: Polyvinylchloride, 1″ Thick, Dark Gray
• Plastic Bar: Polytetrafluoroethylene, 3/16″ Thick, White
• Taper Length Drill Bit: 0.0480″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Plastic Bar: Acetal, 1/32″ Thick, Black Rockwell M-90
• Taper Length Drill Bit: 0.1719″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Plastic Bar: Acrylonitrile Butadiene Styrene, 1/16″ Thick, Beige Rockwell R-105
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Taper Length Drill Bit: 0.1820″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Rotary Scraper For use with One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools,
• Cutter Replacement Blade Use with SF-742, Cuts PVC, CPVC, Pex, Polyethylene and Rubber Hose
• Disposable Gloves: Size X-Large, 6 mil, Nitrile Black, 9-1/2″ Length
• Plastic Sheet: Garolite, 1/16″ Thick, Yellow, 36,000 psi Tensile Strength Rockwell M-110
• Toilet, Urinal, Blocks & Screens; Scent: Green Apple; Contains Paradichlorobenzene: No; Color: White; Blue; Product Size (oz.): 3.25
• Rotary & Multi-Tool Accessories; Accessory Type: Sanding pad; For Use With: Compatible with all Starlock ™ multi-tools; Attachment Size: 3.125 in; Material: None; Application: Removal of excess wood, finish and paint; Includes: (1) Imperial Blades Starloc
• Corner Radius End Mill: 1/8" Dia, 1/2" LOC, 0.0300" Radius, 5 Flute, Solid Carbide
• 1/2″ Inlet, ASME Safety Valve MNPT Ends, 150 Max psi, Brass
• Sheet: Neoprene Rubber, 12″ Wide, 12″ Long, Black Durometer 50, Acrylic Adhesive Backing
• 1/2″ Inlet, ASME Safety Valve MNPT Ends, 75 Max psi, Brass
• Strip: Buna-N Rubber, 6″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• 1″ Shaft Diam, 0.9″ Groove Diam, Stainless Steel External C Style Retaining Ring 1.13″ Free OD, 0.887″ Free ID, 0.046″ Groove Width x 0.05″ Groove Depth, 0.042″ Ring Thickness, Grade 15-7 Grade 632
• Arc Flash Clothing Kit: Size X-Large, Cotton, Jacket, Pants & Hoods
• Adjustable Wrench: 8" OAL, 1-3/32" Jaw Capacity
• #10-32, 0.687″ OAL, 3/8″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 0.312″ Body Length, 3/8″ Thread Length, 3/16″ Thread Depth, Grade T-3, Uncoated
• Safety Goggles: Chemical Splash Dust & Particulates, Anti-Fog, Clear Polycarbonate Lenses Indirect Vent, Gray Frame, Size Universal
• Replacement/Interchange Hydraulic Filter Element: Microglass, 25 µ
• #8-32, 0.687″ OAL, 3/8″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 0.312″ Body Length, 3/8″ Thread Length, 3/16″ Thread Depth, Grade T-3, Uncoated
• Grooving Tool: RH Cut, Face Solid Carbide
• 1,000' x 3″ x 2 mil Polyethylene Barricade Tape Legend: Caution
• Parts Washer Wash Brush With Scraper End Synthetic Bristles, 2-1/2″ Bristle Length, 9-1/2″ Long x 3-3/4″ Wide x 3/4″ High, For Use with Parts Cleaners
• Thread Forming Tap: #2-64, UNF, 2B & 3B Class of Fit, Bottoming, High Speed Steel, TiN Finish 7/16″ Thread Length, 1-3/4″ OAL, H3, Series 776
• Arc Flash Clothing Kit: Size 5X-Large, Cotton, Coat, Hoods & Leggings
• Thread Forming Tap: #3-56, UNF, 2B & 3B Class of Fit, Bottoming, High Speed Steel, TiN Finish 1/2″ Thread Length, 1-13/16″ OAL, H5, Series 776
• Strip: Neoprene Rubber, 3/4″ Wide, 120″ Long, Black Durometer 70, Plain Backing
• Standard Straight Line Action Clamp: 397 lb Load Capacity, 1.2598″ Plunger Travel, Flanged Base, Steel 4 Mounting Hole, 0.203″ Hole, 0.5″ Plunger Dia, Straight Handle
• Die Drill Bit: 0.2055″ Dia, 135 °, Solid Carbide Uncoated, 3/4″ Flute, 2″ OAL, Series 200
• Twist Lock Receptacles; Receptacle/Part Type: Receptacle; Gender: Female; NEMA Configuration: L7-20R; Flange Style: No Flange; Amperage: 20 A; Voltage: 277 V ac; Number Of Poles: 2; Number Of Wires: 3; Maximum Cord Diameter: 16.60 mm; Resistance Features:
• Hex Head Cap Screw: 5/8-11 x 3-3/4″, Grade 5 Steel, Zinc-Plated Partially Threaded, ASME B18.2.1
• Arc Flash Clothing Kit: Size 5X-Large, Cotton, Coat, Hoods & Leggings
• ER: ER25, 0.079″
• Arc Flash Clothing Kit: Size 5X-Large, Cotton, Coat, Hoods & Leggings
• Pipe Reducer: 3/4 x 1/2″ Fitting, 316 Stainless Steel MNPT x FNPT x FNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• ER: ER25, 0.197″
• Extra Length Drill Bit: 0.067″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Hex Head Cap Screw: 7/16-14 x 3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Precision & Specialty Screwdrivers; Tool Type: Torx Screwdriver; Blade Length (mm): 2; Shaft Length: 60 mm; Handle Length: 145 mm; Handle Color: Black; Green; Finish: Chrome-Plated; Body Material: Chrome Alloy Steel; Overall Length (Inch): 5.75; Material:
• Press Fit Headless Drill Bushing: HM, 9.75″ ID Steel
• M4x0.7, 15.53mm OAL, 8mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 6mm Body Length, 9.53mm Thread Length, 2.8mm Thread Depth, Grade 303, Uncoated
• Press Fit Headless Drill Bushing: HM, 9.25″ ID Steel
• Black Union: 1/2″, Threaded Steel, Black Finish, Class 3000, ANSI/ASME B1.20.1, ANSI/ASME B16.11-MSS SP-83 & ASTM A105
• M5x0.8, 15.53mm OAL, 8mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 6mm Body Length, 9.53mm Thread Length, 2.8mm Thread Depth, Grade 303, Uncoated
• Compression Packing; Material: Expanded Graphite; Size: 1/2; Spool Length: 5; Color: Gray; Maximum Working Pressure (psi): 6500; 6500.0 psi; PSC Code: 5330; Color: Gray; Maximum Working Pressure: 6500.0 psi; Material: Expanded Graphite
• Sheet: Neoprene Rubber, 6″ Wide, 6″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Press Fit Headless Drill Bushing: HM, 8.8″ ID Steel
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Replacement/Interchange Hydraulic Filter Element: Microglass, 3 µ
• Deep Groove Ball Bearing: 30 mm OD 472 lb Static Load
• Replacement/Interchange Hydraulic Filter Element: Microglass, 10 µ
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/8″ Thick, 6″ Long, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Deep Groove Ball Bearing: 62 mm OD 1,978 lb Static Load
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1285; Drill Bit Size (Wire): #30; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Four Facet; Overall Length (Decimal Inch): 2.1250; Overall Length (Decimal
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1250; Drill Bit Size (Inch): 0.1250; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Four Facet; Overall Length (Decimal Inch): 2.1250; Overall Length (Decim
• Garden Hose Spray Nozzles; Nozzle Type: Cleaning Nozzle; Adjustable Nozzle; Activation Method: Rear Trigger; Material: Plastic; Thread Type: GHT; Features: Concentrated stream to gentls mist; Ergonomic Non-Slip Handle; One-handed Trigger Lock; Color: Blac
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Hex Head Cap Screw: 5/16-24 x 1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Extra Length Drill Bit: 0.1378″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 524
• Wet & Dry Cut Saw Blade: 4″ Dia, 7/8″ Arbor Hole, 0.08″ Kerf Width, 8 Teeth High Speed Steel Teeth, Use on Masonry, Standard Arbor
• Extra Length Drill Bit: 0.1575″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 524
• Black Reducing Coupling: 1/2 x 1/4″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/4″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Plastic Bar: Polytetrafluoroethylene, 1/16″ Thick, White
• Keys & Drivers For Indexables; Drive Type: Torx Plus; Indexable Tool Type: Toolholder; Torx Size: T10; Fastener Type: Torx ™ Plus; Overall Length (Decimal Inch): 3.14960; Package Quantity: 1
• Sorbent: 3 lb Bag, Application Soaks Up Oil, Grease, & Water Oil & Grease Absorbent
• 11000 RPM, Corded Angle Grinder
• Sheet: SBR Rubber, 6″ Wide, 24″ Long, Black Durometer 60, Plain Backing
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 25.042 mm; Inside Diameter (mm): 16 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibil
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6561; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8201; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Bib Overalls, Hoods & Jacket
• Sheet: Neoprene Rubber, 24″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 25.042 mm; Inside Diameter (mm): 16 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatib
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6476; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Lathe Tool Holder Bushings; Bushing Type: Tool Holder Bushing (Lathe); Outside Diameter (Inch): 1-1/2; Morse Taper Size: 0; Inside Diameter (Decimal Inch): 1.0000; Head Thickness (Decimal Inch): 0.2500; Head Thickness: 1/4
• Plastic Bar: Acetal, 1/2″ Thick, Black Rockwell M-90
• Roll: SBR Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6694; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Plastic Bar: Acetal, 1/2″ Thick, Black Rockwell M-90
• Lathe Tool Holder Bushings; Bushing Type: Tool Holder Bushing (Lathe); Outside Diameter (Inch): 1-1/2; Inside Diameter (Inch): 3/4; Morse Taper Size: 0; Head Thickness (Decimal Inch): 0.2500; Head Thickness: 1/4
• Corner Radius End Mill: 3/16" Dia, 3/4" LOC, 0.0300" Radius, 5 Flute, Solid Carbide
• Sheet: Neoprene Rubber, 6″ Wide, 12″ Long, Black Durometer 60, Plain Backing
• Black Union: 1/4″ Steel, Black Finish, Class 3000
• Sheet: Buna-N Rubber, 6″ Wide, 12″ Long, Black Durometer 60, Plain Backing
• Extra Length Drill Bit: 0.2677", 140 &deg, Carbide
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1/2″; Color: Blue; Material: Vinyl; Size: 8-1/2x11; Minimum Order Quantity: Vinyl; Material: Vinyl
• #4 Screw 9/32″ OAL 0.115″ ID x 3/16″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Hex Head Cap Screw: 1/4-28 x 5/8″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1/2″; Color: Navy Blue; Material: Vinyl; Size: 8 1/2 x 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1/2″; Color: Black; Material: Vinyl; Size: 8-1/2 x 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• #6 Screw 1-3/4″ OAL 0.14″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1/2″; Color: White; Material: Vinyl; Size: 8-1/2 X 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.02″ Groove Width
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.03″ Groove Width
• Cut & Puncture-Resistant Gloves: ANSI Cut A7, ANSI Puncture 4, Polyurethane, Knit Nylon Black, Palm & Fingers Coated
• Cut & Puncture-Resistant Gloves: ANSI Cut A7, ANSI Puncture 4, Polyurethane, Knit Nylon Black, Palm & Fingers Coated
• #8 Screw 1-3/4″ OAL 0.166″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Straight Blade Connector: Industrial, 6-20R, 250VAC, Black & White Self-Grounded, 20A, Nylon Body, 2 Poles, 3 Wires
• Cut & Puncture-Resistant Gloves: ANSI Cut A7, ANSI Puncture 4, Polyurethane, Knit Nylon Black, Palm & Fingers Coated
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Boring Insert: WCMT030204E47 WSM20S, Solid Carbide TiAlN, Al2O3 & Al Finish, 80 ° Trigon, 0.016″ Corner Radius, 0.219″ Inscribed Circle, 0.094″ Thick, 7 ° Relief
• Cut & Puncture-Resistant Gloves: ANSI Cut A7, ANSI Puncture 4, Polyurethane, Knit Nylon Black, Palm & Fingers Coated
• Die Drill Bit: 11/64″ Dia, 135 °, Solid Carbide TiN Finish, 5/8″ Flute Length, 2″ OAL
• Cut & Puncture-Resistant Gloves: ANSI Cut A7, ANSI Puncture 4, Polyurethane, Knit Nylon Black, Palm & Fingers Coated
• Plastic Sheet: Acetal, 1/4″ Thick, White Rockwell M-90
• 7/8-9 7″ OAL Unequal Double Threaded Stud Carbon Steel, 2-1/2″ Long Thread Length, 1-1/4″ Short Thread Length
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Cut & Puncture-Resistant Gloves: ANSI Cut A7, ANSI Puncture 4, Polyurethane, Knit Nylon Black, Palm & Fingers Coated
• Taper Length Drill Bit: 118 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5537
• Plastic Sheet: Acetal, 1/4″ Thick, 6″ Long, Black, 8,500 psi Tensile Strength Rockwell M-90
• Single Pole Protective Caps; Gender: Female; NEMA Rating: 3R, 4X, 12; For Use With: Female Plug; Standards Met: UL; cUL Listed
• FRL Accessories
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Spade Drill Insert
• Work Gloves: Milwaukee Size Large, Synthetic Leather Lined, Synthetic Leather, General Purpose & Impact
• Black Hex Bushing: 2-1/2 x 3/4″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Push-to-Connect Tube Fitting: Stainless Steel, 290 psi
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Push-to-Connect Tube Fitting: 3/4″ OD Lead Free Brass, 200 psi
• 1/2 x 12″ 6063 Aluminum Pipe Nipple Threaded with Thread Sealant, Schedule 40
• Standard Manual Ball Valve: 3/4″ Pipe, Full Port, Brass 2-Way Flow & In-Line, Female NPT, 600 psi WOG
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK247; Series: PK247
• Thread Forming Tap: #4-40, UNC, 2B & 3B Class of Fit, Bottoming, High Speed Steel, TiN Finish 9/16″ Thread Length, 1-7/8″ OAL, H3, Series 776
• Taper Length Drill Bit: 0.2040″ Dia, 118 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5537
• Thread Forming Tap: #5-40, UNC, 2B & 3B Class of Fit, Bottoming, High Speed Steel, TiN Finish 5/8″ Thread Length, 1-15/16″ OAL, H4, Series 776
• Taper Length Drill Bit: 0.1935″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Trash Can & Recycling Container Lids; Lid Type: Flat; Lid Shape: Round; Container Shape: Round; Compatible Container Capacity: 32 Gallon; Color: Brown; Material: HDPE; For Use With: Bronco 32 Gallon Trash Container
• Plastic Bar: Cast Acrylic, 1/2″ Thick, Clear Rockwell M-95
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Bib Overalls, Hoods & Jacket
• Snow Shovels & Scrapers; Product Type: Ice Scraper; Collapsible Shovel; Pusher Shovel; Handle Type: Long; Straight; Handle Material: Aluminum; Blade Material: Polyethylene; Plastic; Handle Length (Decimal Inch): 47; Overall Length (Inch): 52; Overall Leng
• Corner Chamfer End Mill: 7.50 mm Dia, 19.00 mm LOC, 4 Flute, 0.12 mm Chamfer Width, Solid Carbide
• Plastic Sheet: Polytetrafluoroethylene, 1/32″ Thick, 16″ Long, White, 3,500 psi Tensile Strength Shore D-55
• Black Tee: 2 x 2 x 1-1/2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• 1/4″ Stud, 22 to 18 AWG Compatible, Partially Insulated, Crimp Connection, Standard Fork Terminal Nylon Insulation, Red, 600 Volts, Copper Contacts
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 80, Acrylic Adhesive Backing
• Hex Rethreading Die: Right Hand, No Carbon Steel
• Corner Radius End Mill: 1-1/4" Dia, 3-1/2" LOC, 0.2500" Radius, 6 Flute, Solid Carbide
• 400 Grit Silicon Carbide Square Polishing Stone Super Fine Grade, 5/32″ Wide x 4″ Long x 5/32″ Thick
• Extra Length Drill Bit: 0.125″ Dia, 130 °, High Speed Steel Uncoated, 4.134″ Flute Length, 6.102″ OAL, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Black Hex Bushing: 1-1/2 x 1″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• 320 Grit Silicon Carbide Square Polishing Stone Extra Fine Grade, 5/32″ Wide x 4″ Long x 5/32″ Thick
• Silicone Tube: 1/4″ OD, 10' Length 40 Max psi, Clear
• #4 Screw 13/16″ OAL 0.115″ ID x 1/4″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Press Fit Headless Drill Bushing: HM, 20.5″ ID Steel
• Silicone Tube: 5/16″ OD, 25' Length 40 Max psi, Clear
• #2 Screw 13/16″ OAL 0.09″ ID x 1/4″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Hex Head Cap Screw: 9/16-18 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2109; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• M5x0.8, 15.53mm OAL, 10mm Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 6mm Body Length, 9.53mm Thread Length, 1.6mm Thread Depth, Grade T-3, Uncoated
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2170; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• #10-32, 7/8″ OAL, 1/2″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 1/2″ Body Length, 3/8″ Thread Length, 1/4″ Thread Depth, Grade T-3, Uncoated
• Corner Chamfer End Mill: 8.00 mm Dia, 19.00 mm LOC, 4 Flute, 0.12 mm Chamfer Width, Solid Carbide
• Extra Length Drill Bit: 0.6024", 140 &deg, Carbide
• Corner Chamfer End Mill: 8.50 mm Dia, 22.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Windshield Washer: 55 gal, Drum
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.03″ Groove Width
• Arc Flash Clothing Kit: Size X-Large, Cotton, Bib Overalls, Hoods & Jacket
• Square End Mill: 16.00 mm Dia, 32.00 mm LOC, 6 Flute, Solid Carbide
• Grooving Tool: Face Solid Carbide, 1/4″ Shank Dia, 0.025″ Groove Width
• Grooving Tool: Face Solid Carbide, 1/4″ Shank Dia, 0.039″ Groove Width
• Threaded Rod: 3/4-16, 3″ Long, Alloy Steel, Grade B7 Inch Thread, 1A, Right Hand Thread
• Thread Repair Kits; Kit Type: Thread Repair; Insert Thread Size (Inch): 1/4-28; Includes Drill: Yes; Includes Tap: Yes; Includes Installation Tool: Yes; Includes Tang Removal Tool: No
• Cut, Puncture & Abrasive-Resistant Gloves: Size M, ANSI Cut A4, ANSI Puncture 1, Nitrile, HPPE Gray & White, Palm Coated, HPPE Lined, HPPE Back, Nitrile Dipped Grip, ANSI Abrasion 6
• Ink Cartridge: Yellow Use with MFC-J491DW, MFC-J497DW, MFC-J690DW & MFC-J895DW
• Plastic Sheet: Garolite, 1/32″ Thick, Yellow, 36,000 psi Tensile Strength Rockwell M-110
• Straight Blade Receptacles; Receptacle Type: Single Receptacle; Grade: Industrial; NEMA Configuration: 6-20R; Amperage: 20 A; Voltage: 250 V; Wiring Method: Back & Side; Flange Style: No; Number Of Phases: 1; Number Of Wires: 3; Number Of Poles: 2; Mount
• Illuminated Exit Signs; Number of Faces: 1; Light Technology: LED; Letter Color: Red; Mount Type: Surface Mount; Housing Material: Thermoplastic; Housing Color: White; Battery Type: Sealed Nickel Cadmium; Wattage: 1.8 W; Overall Length: 2 in; Overall Heig