Products

• Roll: Silicone Rubber, 36″ Wide, Semi-Clear Durometer 40, Plain Backing
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 24.70; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 24.5; Functional Length (mm): 8.33; P
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 24.80; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 24.5; Functional Length (mm): 8.33; P
• ER: ER20, 0.177″
• Woodruff Keyseat Cutter: 1/4" Cut Dia, 5/64" Cut Width, 1/4" Shank Dia, Straight Tooth
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 25.10; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 25; Functional Length (mm): 9.40; Pri
• Corner Chamfer End Mill: 6.50 mm Dia, 12.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• ER: ER20, 0.394″
• Die Drill Bit: 5/32″ Dia, 135 °, Solid Carbide Uncoated, 5/8″ Flute, 2″ OAL, Series 200
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 25.20; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 25; Functional Length (mm): 9.40; Pri
• Corner Chamfer End Mill: 7.00 mm Dia, 12.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• ER: ER20, 0.354″
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 25.60; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 25.5; Functional Length (mm): 9.40; P
• Corner Chamfer End Mill: 7.50 mm Dia, 12.00 mm LOC, 4 Flute, 0.12 mm Chamfer Width, Solid Carbide
• Wheel Brush: 12″ Wheel Dia, Crimped & Round Nylon & Silicon Carbide, 80 Grit, 1,800 RPM
• ER: ER20, 0.315″
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 25.30; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 25; Functional Length (mm): 9.40; Pri
• Corner Chamfer End Mill: 8.00 mm Dia, 12.00 mm LOC, 4 Flute, 0.12 mm Chamfer Width, Solid Carbide
• Taper Shank Drill Bit: 0.7656″ Dia, 2MT, 130 °, High Speed Steel Oxide Finish, 12.7953″ Flute Length, 19.2913″ OAL, Cone Relief Point, Parabolic Flute
• ER: ER20, 0.276″
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 25.80; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 25.5; Functional Length (mm): 9.40; P
• Shell Mill Holder Sets; Taper Size: R8; Number of Holders: 5; Pilot Hole Diameter: 1 in
• Replaceable Tip Drill: 15 to 15.9 mm Drill Dia, 136 mm Max Depth, 16 mm Straight-Cylindrical Shank Uses DMP Inserts, 219.99 mm OAL, Through Coolant
• ER: ER11, 0.177″
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 25.70; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 25.5; Functional Length (mm): 9.40; P
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Helical Flute Thread Mill: #1-8, UNC, 4 Flute, 3/4″ Shank Dia, Solid Carbide 8 TPI, 0.746″ Cut Dia, 2.058″ LOC, 4-3/4″ OAL, TiN-T21 Coated
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 24.50; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 24; Functional Length (mm): 8.33; Pri
• ER: ER11, 0.157″
• Grooving Tool: Internal Solid Carbide
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• ER: ER11, 0.138″
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 24.00; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 24; Functional Length (mm): 8.33; Pri
• Roll: Silicone Rubber, 36″ Wide, Semi-Clear Durometer 40, Plain Backing
• ER: ER11, 0.11″
• Grooving Tool: Internal Solid Carbide
• Indexable Insert Drills; Drill Style: GD-DH; Maximum Drill Diameter (Inch): 27/32; Maximum Drill Diameter (Decimal Inch): 0.8440; Maximum Drill Depth (Decimal Inch): 8.6600; Shank Type: Flatted; Shank Diameter (Inch): 1-1/4; Shank Diameter (Decimal Inch):
• Sheet: Buna-N Rubber, 12″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• ER: ER11, 0.236″
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Grooving Tool: Internal Solid Carbide
• Spade Drill Insert: 13/16″ Dia, Series 20, Solid Carbide AM420 Finish, Series 20
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Filtered Enclosure Cooling Blowers & Accessories; Accessory Type: Filter; Filter Fan; Accessory Type: Filter; Overall Width/Diameter (Inch): 4; 4 in; Overall Width: 4 in; Overall Height: 3.1000 in; Overall Height (Inch): 3.1000 in; 3.1000; Number Of Phase
• Replaceable Drill Tips; Maximum Drill Diameter (Decimal Inch): 1.3750; Point Angle: 137; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: HFP; Coating Process: PVD; Insert Seat Size: 34.5; Functional Length (D
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.0236; Drill Diameter (mm): 26.00; Maximum Drill Depth (mm): 130.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cuttin
• Grooving Tool: Internal Solid Carbide
• Heavy-Duty Guard Rail: Yellow, Painted, Steel 7-1/2″ Long, 42″ High, 2 Rails
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.1811; Drill Diameter (mm): 30.00; Maximum Drill Depth (mm): 150.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cuttin
• Hex Head Cap Screw: 1-14 x 10″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.1417; Drill Diameter (mm): 29.00; Maximum Drill Depth (mm): 145.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cuttin
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide Uncoated Finish, 1.00 mm TPI, Series 25658
• Roll: Silicone Rubber, 36″ Wide, Semi-Clear Durometer 50, Plain Backing
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.0630; Drill Diameter (mm): 27.00; Maximum Drill Depth (mm): 135.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cuttin
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.1024; Drill Diameter (mm): 28.00; Maximum Drill Depth (mm): 140.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cuttin
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide Uncoated Finish, 1.5 mm TPI, Series 25659
• 0.04 Inch Thick x 12 Inch Wide x 24 Inch Long, Aluminum Sheet Alloy 3003-H14
• Sign Posts & Traffic Sign Accessories; Type: Compact Single Spring Sign Stand; Sign Post/Stand Height (Feet): 4; Sign Height Compatibility (Inch): 48; Sign Width Compatibility (Inch): 48; Material: Steel; For Use With: Roll-Up Signs; Includes: Automotive
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide Uncoated Finish, 1.00 mm TPI, Series 25659
• Taper Shank Drill Bit: 0.8594″ Dia, 2MT, 118 °, High Speed Steel TiN Finish, 5.9055″ Flute Length, 9.7638″ OAL, Cone Relief Point, Spiral Flute
• Taper Shank Drill Bit: 0.8661″ Dia, 2MT, 118 °, High Speed Steel TiN Finish, 5.9055″ Flute Length, 9.7638″ OAL, Cone Relief Point, Spiral Flute
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide Uncoated Finish, 1.5 mm TPI, Series 25658
• 17.78mm Min Bore, 30mm Max Depth, Right Hand A...STLP Indexable Boring Bar 8″ OAL, 5/8″ Shank Diam, 95° Lead Angle, Uses TPMX22 ™, TPMT22 ™, TPGH22 ™, TPET22 ™, TPGB22..., TPMH22 ™, A...STLP Inserts, Through Coolant
• Taper Shank & Reducing Adapters; Overall Length (mm): 100.0000; Overall Length (Decimal Inch): 3.9370
• Taper Shank & Reducing Adapters; Overall Length (mm): 107.9500; Overall Length (Decimal Inch): 4.2500
• Wheel Brushes; Wire Type: Crimped; Outside Diameter (Inch): 15; Arbor Hole Thread Size: 1/4; Arbor Hole Style: Round; Arbor Hole Size: 1-1/4; Fill Material: Steel; Filament Wire Diameter Range: 0.0100-0.0199; Maximum Rpm: 3000.000
• Cut, Puncture & Abrasive-Resistant Gloves: Size 4XL, ANSI Cut A5, ANSI Puncture 5, Micro-Foam Nitrile, Polyethylene Black & Gray, Palm & Fingertips Coated, Single Dipped Grip, ANSI Abrasion 4
• Guhring GH305.0500.500.00.04.R External Right Hand NonFace Grooving Radial Grooving Non-Coolant Holder 1/2″ Square Shank
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Guhring GH305.0500.500.00.04.L External Left Hand NonFace Grooving Radial Grooving Non-Coolant Holder 1/2″ Square Shank
• One Way Round, Black on Yellow, Use for Security & Admittance
• Entrance Mat: 8' Long, 6' Wide, 3/8″ Thick, Polyethylene Terephthalate Surface Indoor, Heavy/High Traffic, SBR Rubber Base, Charcoal
• Corner Radius End Mill: 1/2" Dia, 5/8" LOC, 0.0300" Radius, 5 Flute, Solid Carbide
• Taper Length Drill Bit: 0.1440″ Dia, 118 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5536
• Boring Head Modular Connection Shank: HSK63A, Threaded Mount 1.75″ Projection
• DOT Conspicuity Tape; Color: Red; Tape Material: Reflective Sheeting; Width (Inch): 1/2; Length (Feet): 150
• Boring Head Modular Connection Shank: HSK63A, Threaded Mount 2.15″ Projection
• Taper Length Drill Bit: 0.3228″ Dia, 140 ° WD1 Finish, RH Cut, Spiral Flute, Cylindrical Shank, Series 5630
• Replaceable Tip Drill: 25 to 25.5 mm Drill Dia, 208 mm Max Depth, 32 mm Straight-Cylindrical Shank Seat Size 25, 304 mm OAL, Through Coolant
• Hand Sanitizer: Foam, 1 L, Bottle
• Taper Length Drill Bit: 0.1610″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Taper Length Drill Bit: 0.3320″ Dia, 140 ° WD1 Finish, RH Cut, Spiral Flute, Cylindrical Shank, Series 5630
• Knob Locksets; Type: Storeroom; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Stainless Steel; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.375; Lockset Grade: Grade 2
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0878MC
• Taper Length Drill Bit: 0.3150″ Dia, 140 ° WD1 Finish, RH Cut, Spiral Flute, Cylindrical Shank, Series 5630
• Foaming Tire & Engine Cleaner Self-Service Tire & Engine Cleaner
• Taper Length Drill Bit: 0.3189″ Dia, 140 ° WD1 Finish, RH Cut, Spiral Flute, Cylindrical Shank, Series 5630
• Taper Length Drill Bit: 0.1660″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Taper Length Drill Bit: 0.3307″ Dia, 140 ° WD1 Finish, RH Cut, Spiral Flute, Cylindrical Shank, Series 5630
• Taper Length Drill Bit: 0.3268″ Dia, 140 ° WD1 Finish, RH Cut, Spiral Flute, Cylindrical Shank, Series 5630
• Machining Chuck Jaws & Accessories; Accessory Type: Low Profile Base; For Use With: Mounting For 2Ea M12 Bolts At 100MM Or 1/2″ Bolts At 4″; Material: Aluminum
• Taper Length Drill Bit: 0.1695″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Taper Length Drill Bit: 0.3281″ Dia, 140 ° WD1 Finish, RH Cut, Spiral Flute, Cylindrical Shank, Series 5630
• Portable Hydraulic Cylinder: Single Acting, 0.51 cu in Oil Capacity 1.08″ Retracted Length, 1.32″ Extended Length
• Taper Length Drill Bit: 0.1730″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1-1/2″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5748; Drill Diameter (mm): 40.00; Maximum Drill Depth (mm): 160.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5945; Drill Diameter (mm): 40.50; Maximum Drill Depth (mm): 164.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable High-Feed Face Mill: 40 mm Cut Dia, 16 mm Arbor Hole Takes (5) 0904 Inserts, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5551; Drill Diameter (mm): 39.50; Maximum Drill Depth (mm): 160.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5354; Drill Diameter (mm): 39.00; Maximum Drill Depth (mm): 156.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5157; Drill Diameter (mm): 38.50; Maximum Drill Depth (mm): 156.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.6142; Drill Diameter (mm): 41.00; Maximum Drill Depth (mm): 164.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Silicone Tube: 3/8″ OD, 100' Length 40 Max psi, Blue
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4764; Drill Diameter (mm): 37.50; Maximum Drill Depth (mm): 152.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5
• Guhring GB108.0020.095.00.22.N.IK.VSP 20.00mm Shank 95.00mm OAL Round Shank Holder with Top Clamping Screw, Four Clamping Surfaces Used with 8mm Shank Tools
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.6339; Drill Diameter (mm): 41.50; Maximum Drill Depth (mm): 168.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• All-Purpose Cleaner: 13 gal Can Aerosol, Sweet Scent
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.6535; Drill Diameter (mm): 42.00; Maximum Drill Depth (mm): 168.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Guhring GB108.0022.095.00.22.N.IK.VSP 22.00mm Shank 95.00mm OAL Round Shank Holder with Top Clamping Screw, Four Clamping Surfaces Used with 8mm Shank Tools
• #10-32, 2-1/8″ OAL, 1/2″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-3/4″ Body Length, 3/8″ Thread Length, 1/2″ Thread Depth, Grade 303, Uncoated
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4961; Drill Diameter (mm): 38.00; Maximum Drill Depth (mm): 152.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 20' Long x 20' Wide, 16 mil Polyethylene, Rectangle
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 40, Plain Backing
• Plastic Sheet: Acetal, 5/8″ Thick, Black Rockwell M-90
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1/2″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 40, Acrylic Adhesive Backing
• 3-1/2 Inch Outside Diameter x 72 Inch Long, Aluminum Round Tube 2-3/4 Inch Inside Diameter, 3/8 Inch Wall Thickness, Alloy 6061
• Rivet Nuts; Nut Type: Open End; Material: Steel; Head Type: Flange; Minimum Grip: 0.02 in; Drill Size (Inch): 0.297; Maximum Grip: 0.28 in; Finish: Zinc Plated; Thread Size: 15/16-18; Minimum Grip (Decimal Inch): 0.0200; Maximum Grip (Decimal Inch): 0.280
• Plastic Sheet: Acetal, 1-1/4″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• 1/2″ Screw 1″ OAL 0.505″ ID x 1″ OD Round Stainless Steel Circuit Board Spacers Passivated, Grade 316, Female Unthreaded
• Black Reducing Coupling: 3 x 1-1/2″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 11.0000; Material: 17-4 PH Stainless Steel; Finish: Heat Treated; Head Diameter (Decimal Inch): 32.0000; Shank Length (Decimal Inch): 41.5 mm; Maximum Holding Force: 5.3 kN; K
• Welding Helmet Accessories; Compatibility: 3M Speedglas Heavy-Duty Welding Helmet G5-01; Adjustment: Non-Adjustable; Color: Black
• Taper Length Drill Bit: 0.0670″ Dia, 130 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 669
• Glass Scale: 12″ Max Measuring Range, 0.0002″ Resolution 0.0002″ Accuracy, Series Micro PGS Transducer
• Taper Length Drill Bit: 0.0394″ Dia, 130 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 669
• Traffic Barricades; Type: Type II; Barricade Height (Inch): 45; Material: Plastic Board; Galvanized Steel Leg; Barricade Width (Inch): 24; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Color: White; Weight (Lb.): 2.2000; Top Panel Height (Inch): 8;
• Welded Bandsaw Blade: 21' 7″ Long, 1/2″ Wide, 0.035″ Thick, 10 to 14 TPI Bi-Metal, Toothed Edge
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Knob Locksets; Type: Storeroom; Key Type: Keyed Different; Material: Metal; Finish/Coating: Bright Brass; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.375; Lockset Grade: Grade 2
• Specialty System Collets; Collet System: Standard Collet; Collet Series: EHB; Taper Size: Straight; Size (mm): 25.00; Material: Steel; Number of Pieces: 1.000; Head Length (Inch): 0.1968; Type: Straight Sleeve
• Specialty System Collets; Collet System: Standard Collet; Collet Series: EHW; Taper Size: Straight; Size (mm): 25.00; Material: Steel; Number of Pieces: 1.000; Head Length (Inch): 0.1968; Type: Straight Sleeve
• Indexable High-Feed End Mill: 1-1/2″ Cut Dia, 1-1/2″ Cylindrical Shank Uses 6 PNCU Inserts, 0.059″ Max Depth, 8″ OAL, Through Coolant
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 27.7 mm OD, 16 mm Stroke, M20 x 1.5 Thread 93 mm OAL, 18.1 lb Force
• Indexable Boring Bar: A24U-TWLNL-4, 95.00&deg N/A Steel 14.0000″ OAL, Clamp,
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 27.7 mm OD, 16 mm Stroke, M20 x 1.5 Thread 93 mm OAL, 18.1 lb Force
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 12.7 mm Hole 101.6 mm Projection, 32 mm Nose Dia, 34.1 mm Clamp Depth, 25,000 RPM, Through Coolant
• Lawn Sprinklers; Type: Heavy-Duty; Pulsating; Oscillating; Traveling; Whirler; Impulse; Rotary; Thread Size: .75 in; Base Style: Spike; Tripod; Spray Coverage: 1390 ft ™; Spray Pattern: Circle; Sprinkler Type: Above Ground; Product Type: Heavy-Duty; Pulsa
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 9.53 mm Hole 101.6 mm Projection, 30 mm Nose Dia, 41 mm Clamp Depth, 25,000 RPM, Through Coolant
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 27.7 mm OD, 16 mm Stroke, M20 x 1.5 Thread 93 mm OAL, 18.1 lb Force
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 6.35 mm Hole 101.6 mm Projection, 26 mm Nose Dia, 37 mm Clamp Depth, 25,000 RPM, Through Coolant
• Collapsible Berms & Pools; Type: Drive Over; Product Type: Berm Builder Kit; Sump Capacity (Gal.): 0; 0.00; Spill Capacity: 0; Length (Feet): 12.000; 12.00; Length (Inch): 12.00; Overall Length: 12.00; Overall Width: 2.000; Width (Inch): 2.000; Overall He
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 19.05 mm Hole 101.6 mm Projection, 42 mm Nose Dia, 41.5 mm Clamp Depth, 25,000 RPM, Through Coolant
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 15.88 mm Hole 101.6 mm Projection, 38 mm Nose Dia, 38.6 mm Clamp Depth, 25,000 RPM, Through Coolant
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 31.75 mm Hole 101.6 mm Projection, 60.6 mm Nose Dia, 61 mm Clamp Depth, 25,000 RPM, Through Coolant
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 25.4 mm Hole 101.6 mm Projection, 55 mm Nose Dia, 57 mm Clamp Depth, 25,000 RPM, Through Coolant
• Plastic, Rubber & Synthetic Tube; Inside Diameter (Inch): 5/8; Outside Diameter (Inch): 7/8; Wall Thickness (Inch): 1/8; Material: PVC; Standard Coil Length (Feet): 50; Maximum Working Pressure (psi): 115; Hardness: 70A; Special Item Information: Polyeste
• Sheet: Silicone Rubber, 36″ Wide, 36″ Long, Red Durometer 40, High Temperature Adhesive Backing
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 12 mm Hole 101.6 mm Projection, 32 mm Nose Dia, 34.1 mm Clamp Depth, 25,000 RPM, Through Coolant
• Liquid Heat Drain Opener Drain opener
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 10 mm Hole 101.6 mm Projection, 30 mm Nose Dia, 29.1 mm Clamp Depth, 25,000 RPM, Through Coolant
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.7717; Drill Diameter (mm): 45.00; Maximum Drill Depth (mm): 90.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.00
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 8 mm Hole 101.6 mm Projection, 28 mm Nose Dia, 37 mm Clamp Depth, 25,000 RPM, Through Coolant
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.9685; Drill Diameter (mm): 50.00; Maximum Drill Depth (mm): 100.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 6 mm Hole 101.6 mm Projection, 26 mm Nose Dia, 37 mm Clamp Depth, 25,000 RPM, Through Coolant
• KTFSS21300HPGM KCP15A Carbide Replaceable Tip Drill AlTiN Finish, 143 deg Included Angle, 21.3mm Diam, Series KTFS
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 20 mm Hole 101.6 mm Projection, 42 mm Nose Dia, 41.5 mm Clamp Depth, 25,000 RPM, Through Coolant
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.8898; Drill Diameter (mm): 48.00; Maximum Drill Depth (mm): 96.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.00
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 16 mm Hole 101.6 mm Projection, 38 mm Nose Dia, 38.6 mm Clamp Depth, 25,000 RPM, Through Coolant
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 32 mm Hole 101.6 mm Projection, 63 mm Nose Dia, 51.9 mm Clamp Depth, 25,000 RPM, Through Coolant
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 2.0472; Drill Diameter (mm): 52.00; Maximum Drill Depth (mm): 104.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3346; Diameter (mm): 33.90; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Hydraulic Tool Chuck: CAT40, CAT40, Taper Shank, 25 mm Hole 101.6 mm Projection, 55 mm Nose Dia, 46.5 mm Clamp Depth, 25,000 RPM, Through Coolant
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2874; Diameter (mm): 32.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 2.1260; Drill Diameter (mm): 54.00; Maximum Drill Depth (mm): 162.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 2.0866; Drill Diameter (mm): 53.00; Maximum Drill Depth (mm): 106.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2756; Diameter (mm): 32.40; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• MIG Welder Wire Liner: 0.047 to 0.0937″ Wire Dia, 6' Long
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3228; Diameter (mm): 33.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.8110; Drill Diameter (mm): 46.00; Maximum Drill Depth (mm): 138.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Boring Bar: A24U-THSNL-4, 45.00&deg N/A Steel 14.0000″ OAL, Clamp,
• Indexable Threading Toolholder: Internal, Right Hand, 11 x 11 mm Shank Solid Carbide, 0.25″ Insert Inscribed Circle, Series SNR
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2717; Diameter (mm): 32.30; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.8504; Drill Diameter (mm): 47.00; Maximum Drill Depth (mm): 94.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.00
• Indexable Boring Bar: A24U-TDUNL-4, 93.00&deg N/A Steel 14.0000″ OAL, Clamp,
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3031; Diameter (mm): 33.10; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 2.1260; Drill Diameter (mm): 54.00; Maximum Drill Depth (mm): 108.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0
• Indexable Boring Bar: A24U-TWLNR-4, 95.00&deg N/A Steel 14.0000″ OAL, Clamp,
• Knob Locksets; Type: Entrance; Key Type: Keyed Different; Material: Metal; Finish/Coating: Brass; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.75; Lockset Grade: Grade 2
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0217; Drill Size (Metric): 0.550; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 5.50; Depth of Cut (Metric): 5.50; Number of Flutes: 1; Coolant Hole Configurati
• Contact/Circuit Board Cleaner: 10 oz Aerosol Can Safe for Most Plastics
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.8110; Drill Diameter (mm): 46.00; Maximum Drill Depth (mm): 92.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.00
• Knob Locksets; Type: Privacy; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.75; Lockset Grade: Grade 2
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2835; Diameter (mm): 32.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Threading Toolholder: Internal, Right Hand, 11 x 11 mm Shank Solid Carbide, 0.25″ Insert Inscribed Circle, Series SNR
• Indexable Boring Bar: A24U-TCLNL-4, 95.00&deg N/A Steel 14.0000″ OAL, Clamp,
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3307; Diameter (mm): 33.80; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 2.0079; Drill Diameter (mm): 51.00; Maximum Drill Depth (mm): 102.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2913; Diameter (mm): 32.80; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0197; Drill Size (Metric): 0.500; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 5.00; Depth of Cut (Metric): 5.00; Number of Flutes: 1; Coolant Hole Configurati
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3280; Diameter (Inch): 1-21/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coatin
• Indexable Copy Face Mills; Maximum Depth Of Cut: 6.00 mm; Compatible Insert Size Code: RJ..1204; Arbor Hole Diameter (mm): 27.00; Maximum Ramping Angle: 3 ™; Overall Height (mm): 50.00 mm; Series: 1A7H; Number of Cutter Inserts: 7; Cutter Style: 1A7H; Ke
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2811; Diameter (Inch): 1-9/32; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating
• Extra Length Drill Bit: 0.5″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 12.126″ Flute Length, 14.055″ OAL, Straight-Cylindrical Shank, Series DC160-20-A1
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3268; Diameter (mm): 33.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Helical Flute Thread Mill: Internal & External, 5 Flute, 1/2″ Shank Dia, Solid Carbide 0.47″ Cut Dia, 1-1/4″ LOC, TiAlN Coated
• Extra Length Drill Bit: 0.5118″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 12.126″ Flute Length, 14.055″ OAL, Straight-Cylindrical Shank, Series DC160-20-A1
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0256; Drill Size (Metric): 0.650; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 6.50; Depth of Cut (Metric): 6.50; Number of Flutes: 1; Coolant Hole Configurati
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2795; Diameter (mm): 32.50; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Extra Length Drill Bit: 0.5512″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 12.126″ Flute Length, 14.055″ OAL, Straight-Cylindrical Shank, Series DC160-20-A1
• Compact Hydraulic Cylinders; Type: Single Acting; Mounting Style: Horizontal/Vertical; Port Size: 7/16-20; Body Material: Steel; Mount Type: Horizontal/Vertical; Actuation: Single Acting
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3189; Diameter (mm): 33.50; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1-1/2″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• 15 Gal Drum Automatic Dishwashing Liquid Rinse Aid
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2953; Diameter (mm): 32.90; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Visual Signal Device Accessories; Signal Device Accessory Type: Rocker Switch
• Taper Length Drill Bit: 0.5000″ Dia, 118 ° Bright/Uncoated, 5″ Flute Length
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0236; Drill Size (Metric): 0.600; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 6.00; Depth of Cut (Metric): 6.00; Number of Flutes: 1; Coolant Hole Configurati
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2969; Diameter (Inch): 1-19/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coatin
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3126; Diameter (Inch): 1-5/16; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2657; Diameter (Inch): 1-17/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coatin
• Hex Head Cap Screw: 5/8-11 x 6″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Gun Drill Bits; DrillType: Half-Round Single Lip Gun Drill; Drill Size (Inch): 0.0276; Drill Size (Metric): 0.700; Drill/Shank Material: Solid Carbide; Flute Length (Metric): 7.00; Depth of Cut (Metric): 7.00; Number of Flutes: 1; Coolant Hole Configurati
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3150; Diameter (mm): 33.40; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.0310; Drill Diameter (Inch): 1-1/32; Maximum Drill Depth (Decimal Inch): 2.1260; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2677; Diameter (mm): 32.20; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.0620; Drill Diameter (Inch): 1-1/16; Maximum Drill Depth (Decimal Inch): 2.1260; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3110; Diameter (mm): 33.30; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.2810; Drill Diameter (Inch): 1-9/32; Maximum Drill Depth (Decimal Inch): 2.5980; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Non-Woven Rolls; Abrasive Material: Precision Shaped Ceramic; Roll Width (Inch): 10; Grade: Medium; Fine; Grit: 150; For Finish: Smooth; Roll Width (Decimal Inch): 10
• Hand Cleaner: 1 gal Bottle Liquid, Red, Cherry Scent
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2638; Diameter (mm): 32.10; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.3120; Drill Diameter (Inch): 1-5/16; Maximum Drill Depth (Decimal Inch): 2.6770; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2598; Diameter (mm): 32.00; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Drum & Tank Handling Equipment; Load Capacity (Lb.
• Head-To-Toe Liquid Soap for Head-to-Toe Use
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.1250; Drill Diameter (Inch): 1-1/8; Maximum Drill Depth (Decimal Inch): 2.2830; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.3071; Diameter (mm): 33.20; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8274; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.2180; Drill Diameter (Inch): 1-7/32; Maximum Drill Depth (Decimal Inch): 2.4410; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2992; Diameter (mm): 33.00; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y321H; Insert Seat Size: S32; Coolant Through: No; Coating/Finish: H-Coating; I
• Taper Length Drill Bit: 0.0781″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: VN..33.; Toolholder Style: TVVNN; Rake: Negative; Multi-use Tool: No; Lead Angle: 73.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width (
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.3280; Drill Diameter (Inch): 1-21/64; Maximum Drill Depth (Decimal Inch): 2.6770; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.4060; Drill Diameter (Inch): 1-13/32; Maximum Drill Depth (Decimal Inch): 2.8350; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: VN..2.53.; Toolholder Style: TVQNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 117.5; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank W
• Imaging Kit: Black & Tri-Color Use with Lexmark CS310dn, CS310n, CS410dn, CS410dtn, CS410n, CS510de, CS510dte, CX310, CX310dn & CX310n
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.4370; Drill Diameter (Inch): 1-7/16; Maximum Drill Depth (Decimal Inch): 2.9130; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 31.50; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 31; Functional Length (mm): 11.70; Pr
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DC..21.5.; Toolholder Style: BDJCR; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Lever; Shank Width (Decimal Inch
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.0000; Drill Diameter (Inch): 1; Maximum Drill Depth (Decimal Inch): 2.0470; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.000
• Collet Chuck: 0.5 to 7 mm Capacity, ER Collet, 16 mm Shank Dia, Straight Shank 150 mm Projection, 0.003 mm TIR, Through Coolant
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: DC..32.5.; Toolholder Style: BDNCN; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Lead Angle: 63.0; Insert Holding Method: Lever; Shank Width (Decimal Inch):
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.2500; Drill Diameter (Inch): 1-1/4; Maximum Drill Depth (Decimal Inch): 2.5200; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CC..21.5.; Toolholder Style: BCLCL; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Lever; Shank Width (Decimal Inch)