Products

• Clean Room Matting; Surface Material: Vinyl; Mat Type: Sanitizing; Length (Feet): 5 in; Length (Inch): 5; 5 in; Width (Feet): 3.00; 3.0 ft; Thickness (Inch): 1; Dry/Wet Environment: Dry; Layers per Mat: 1; Thickness: 1 in; Color: Black (Yellow Borders); B
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Wasp & Yellow Jacket Foam Insect Killer
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1″ Thick, White
• Indexable Square-Shoulder Face Mill: TSP4004RIA, 31.7500″ Arbor Hole Dia, Uses 6, TPKN Inserts, No, Series TSE
• Stripper: 1 gal Bottle, Use On Floors Hard Floor Care
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Welded Bandsaw Blade: 22' Long, 1-1/4″ Wide, 0.042″ Thick, 5 to 8 TPI Carbon Steel, Toothed Edge
• Purge Metered Flying Inscet Killer Insect Killer
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX12.R
• 150 Grit Aluminum Oxide Rectangular Polishing Stone Very Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• Extra Length Drill Bit: 0.2047″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 504
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX11.R
• 0.67OZ APPLE 3PK/6CS SCENTED OIL REFILL Scented Oil
• Roll: Buna-N Rubber, 12″ Wide, Black Durometer 60, Plain Backing
• Hatchets & Axes; Type: Axe; Overall Length Range: 24″ and Longer; Head Weight Range: 1 - 2.9 lbs.; Handle Material: Hickory; Blade Length (Inch): 4-15/16; Head Weight (Grams): 1000; Overall Length (mm): 700.0000; Additional Information: Felling & Cultivat
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• 220 Grit Aluminum Oxide Rectangular Polishing Stone Very Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• Indexable Insert Drills; Drill Style: TDX; Maximum Drill Diameter (mm): 28.00; Maximum Drill Depth (mm): 140.70; Shank Type: Flatted; Shank Diameter (Inch): 32; Shank Diameter (mm): 32.00; Number of Drill Inserts: 2; Cutting Direction: Right Hand; Maximum
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX10.R
• Indexable Insert Drills; Drill Style: TDX; Maximum Drill Diameter (mm): 29.00; Maximum Drill Depth (mm): 145.70; Shank Type: Flatted; Shank Diameter (Inch): 32; Shank Diameter (mm): 32.00; Number of Drill Inserts: 2; Cutting Direction: Right Hand; Maximum
• Hex Head Cap Screw: 1/2-20 x 1-3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• 220 Grit Aluminum Oxide Square Polishing Stone Very Fine Grade, 5/32″ Wide x 4″ Long x 5/32″ Thick
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX12.R
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 40' Long x 40' Wide, 5 mil Polyethylene, Rectangle
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 40' Long x 40' Wide, 5 mil Polyethylene, Rectangle
• Graphite; Width (Inch): 1; Length (Inch): 6; Thickness (Inch): 1/4; Type: Sheet; Tensile Strength: 5500 psi; Additional Information: Maximum Temperature: 800 ™F; Additional Information: Maximum Temperature: 800 ™F
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX11.R
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7480; Drill Diameter (mm): 19.00; Maximum Drill Depth (mm): 57.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7283; Drill Diameter (mm): 18.50; Maximum Drill Depth (mm): 57.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX12.R
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Worpiece Dia, Right Hand 3/4″ Shank Height, 3/4″ Shank Width, Uses TKN3, TKN3-P, TKR3 & TKR3-P Inserts, Series KTKC
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7874; Drill Diameter (mm): 20.00; Maximum Drill Depth (mm): 60.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 2; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX12.R
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7677; Drill Diameter (mm): 19.50; Maximum Drill Depth (mm): 60.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.1398MC
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX10.R
• 5 Gal Drum Automatic Dishwashing Liquid Chlorinated
• Taper Length Drill Bit: 0.2638″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Plastic, Rubber & Synthetic Tube; Inside Diameter (Inch): 3/8; Outside Diameter (Inch): 1/2; Wall Thickness (Inch): 1/16; Material: Silicone; Standard Coil Length (Feet): 100; Maximum Working Pressure (psi): 40; Hardness: 60A; Special Item Information: Hi
• Sheet: Buna-N Rubber, 1″ Thick, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX12.R
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Taper Length Drill Bit: 0.2382″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX10.R
• Hose Reel with Hose: 3/8″ ID Hose x 35' 500 psi
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX11.R
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Jacket, Pants & Hoods
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX12.R
• All-Purpose Cleaner: 1 gal Bottle Liquid, Pine Scent
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Tap Collet: ER16, 0.141″ #0 to 1/8″ Tap
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX12.R
• Indexable Boring Bar: S25XCTUPR1634, 34.00 mm Min Bore, 25.00 mm Shank Dia, N/A Steel Top Clamp, Uses TPMR32 ™, TPGR32 ™, TPM32 ™ & TPG32 ™ Inserts
• Tap Collet: ER16, 6.3 mm M6.3 Tap
• Taper Length Drill Bit: 0.1250″ Dia, 130 ° Coated, 2.7165″ Flute Length, 4.1732″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 669
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX12.R
• Boring Cartridges
• Indexable Cutoff Toolholder: 22 mm Max Depth of Cut, 44 mm Max Workpiece Dia, Right Hand 20 mm Shank Height, 12 mm Shank Width, Uses TKN4 & TKR4 Inserts, Series KTKC
• Arc Flash Clothing Kit: Size 3X-Large, Cotton, Bib Overalls, Hoods & Jacket
• Tap Collet: ER25, 0.255″ 1/4″ Tap
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: LLTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 0.0; Insert Holding Method: Lock Pin; Lever Lock; Shank Width (Decimal Inch): 0.9843; Insert Compatibility:
• Welding Helmet Accessories; Compatibility: 3M Speedglas Heavy-Duty Welding Helmet G5-01; Adjustment: Non-Adjustable; Color: Black
• Indexable Boring Bar: E20S-SDUCL11-D270, 27.00 mm Min Bore, 20.00 mm Shank Dia, 93.00&deg N/A Solid Carbide 250.0000″ OAL, Screw,
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX10.R
• Tap Collet: ER25, 0.318″ 5/16″ Tap
• Sheet: Silicone Rubber, 18″ Wide, 36″ Long, Red Durometer 60, Plain Backing
• Indexable Turning Toolholders; Hand of Holder: Left Hand; Toolholder Style: LLTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 0.0; Insert Holding Method: Lock Pin; Lever Lock; Shank Width (Decimal Inch): 0.9843; Insert Compatibility: R
• Tap Collet: ER16, 1.8″ #8 to 5/32″ Tap
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX11.R
• 5/16″ Diam, 1-3/4 Length Under Head, Hex Drive Concrete Screw & Masonry Fastener Carbon Steel, StalGard Silver Finish
• Tap Collet: ER16, 6 mm M6 Tap
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Tap Collet: ER16, 0.194″ #9 to 3/16″ Tap
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• End Mill Holder: BT40 Taper Shank, 3/4″ Hole 2-1/2″ Projection, 1-3/4″ Nose Dia, Through Coolant
• Portable & Backpack Vacuum Cleaners; Power Source: Battery; Filtration Type: Standard; Vacuum Collection Type: Bagless; Maximum Air Flow: 53; Tank Capacity: 750 ml
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Indexable Insert Drills; Drill Style: D206; Drill Diameter (Inch): 49/64; Maximum Drill Depth (mm): 38.86; Shank Type: Flange; Shank Diameter (mm): 25.00; Number of Drill Inserts: 2; Cutting Direction: Right Hand; Maximum Drill Depth Range (mm): 0.00 to 5
• End Mill Holder: BT40 Taper Shank, 3/8″ Hole 2-1/2″ Projection, 1″ Nose Dia, Through Coolant
• HEPA & Critical Vacuum Cleaners; Vacuum Type: Cordless Dust Extractor; Power Type: Battery; Filtration Type: Unrated; Tank Capacity (Gal.): .75 gal; Tank Material: Plastic; Maximum Air Flow: 120; Power Source: Battery; Collection Capacity: .75 gal
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX10.R
• Indexable Insert Drills; Drill Style: D205; Drill Diameter (Inch): 21/32; Maximum Drill Depth (mm): 33.32; Shank Type: Flange; Shank Diameter (mm): 25.00; Number of Drill Inserts: 2; Cutting Direction: Right Hand; Maximum Drill Depth Range (mm): 0.00 to 5
• Indexable Grooving Toolholder: TCHL19, 0.1970″ Max Groove Width 0.9840″ Max Depth, Uses TCEL 1 to 8, TCFR 1 to 8 & TQCL 1 to 8 Inserts, 0.7500″ Shank Height, 3/4″ Shank Width, No
• Portable & Backpack Vacuum Cleaners; Power Source: Battery; Filtration Type: Standard; Vacuum Collection Type: Bagless; Maximum Air Flow: 53; Tank Capacity: 750 ml
• End Mill Holder: BT40 Taper Shank, 1/2″ Hole 2-1/2″ Projection, 1-1/4″ Nose Dia, Through Coolant
• Indexable Insert Drills; Drill Style: D205; Drill Diameter (Inch): 21/32; Maximum Drill Depth (Decimal Inch): 1.3120; Shank Type: Flange; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Number of Drill Inserts: 2; Cutting Direction: Right
• End Mill Holder: BT40 Taper Shank, 5/8″ Hole 2-1/2″ Projection, 1-1/2″ Nose Dia, Through Coolant
• Indexable Insert Drills; Drill Style: D206; Drill Diameter (Inch): 49/64; Maximum Drill Depth (Decimal Inch): 1.5300; Shank Type: Flange; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Number of Drill Inserts: 2; Cutting Direction: Right
• Tap Collet: ER25, 4.5 mm M4.5 Tap
• Toner Cartridge: Black Use with HP Color Laserjet M551 Enterprise 500MFP, M570 & M575
• Standard-Duty Shock Absorber: 2.4 mm Rod Dia, 15 mm OD, 8 mm Stroke, M10 x 1 Thread 73.2 mm OAL, 5.88 lb Force
• Tap Collet: ER20, 4.5 mm M4.5 Tap
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Galvanized Steel Feet; Plastic Board; Polymer Plastic Upright; Barricade Width (Inch): 96; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 16.0000; Top Panel Heig
• Boring Head Bases, Bridges & Counterweights; Type: EBore Counter Weight; System Compatibility: eBore; System Compatibility: eBore; Overall Length (Decimal Inch): Various; Series Compatibility: eBore; Series Compatibility: eBore
• Tap Collet: ER16, 2 mm M2 Tap
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Galvanized Steel Feet; Plastic Board; Polymer Plastic Upright; Barricade Width (Inch): 96; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 16.0000; Top Panel Heig
• Block Clamp Cylinders; Action Type: Single-Acting; Effective Piston Area (Decimal Inch): 0.175; Operating Stroke Length (Inch): 0.1575 in; Operating Volume (Cu. In.): 0.028; Maximum Operating Pressure (psi): 145 psi; Minimum Operating Pressure (psi): 29 p
• Tap Collet: ER16, 1.8 mm M1.8 Tap
• Replaceable Tip Drill: 0.827 to 0.862'' Drill Dia, 6.798″ Max Depth, 1'' Flatted Shank Uses H3P Inserts, 10.52″ OAL, Through Coolant
• Tap Collet: ER11, 3.55 mm M3.55 Tap
• Replaceable Tip Drill: 0.866 to 0.902'' Drill Dia, 7.119″ Max Depth, 1'' Flatted Shank Uses H3P Inserts, 10.93″ OAL, Through Coolant
• Tap Collet: ER11, 3 mm M3.0 Tap
• Tap Collet: ER16, 1.6 mm M1.6 Tap
• Sheet: Silicone Rubber, 24″ Wide, 24″ Long, Orange-Red Durometer 35 to 45, Plain Backing
• Indexable High-Feed End Mill: 1-1/2″ Cut Dia, 1-1/4″ Weldon Flat Shank Uses 4 SDXS Inserts, 0.06″ Max Depth, 6″ OAL, Through Coolant
• Tap Collet: ER20, 5 mm M5 Tap
• Plastic Bar: Acetal, 1/4″ Thick, White
• Shrink-Fit Tool Holder & Adapter: SFS12 Taper Shank, 0.1875″ Hole Dia 0.87″ Projection, 0.31″ Nose Dia, Through Coolant
• Replaceable Tip Drill: 0.906 to 0.941'' Drill Dia, 7.443″ Max Depth, 1.25'' Straight-Cylindrical Shank Uses H3P Inserts, 11.48 mm OAL, Through Coolant
• Closed Cell Neoprene Foam: 36″ Wide, Black Plain Backing
• Shrink-Fit Tool Holder & Adapter: SFS12 Taper Shank, 0.125″ Hole Dia 0.87″ Projection, 0.24″ Nose Dia, Through Coolant
• Spade Drill Insert: 30 mm Dia, Series 29, Solid Carbide AM420 Finish, Series 29
• Replaceable Tip Drill: 8.5 to 8.99 mm Drill Dia, 27 mm Max Depth, 12 mm Flange Shank Seat Size 080, 86 mm OAL, Through Coolant
• Shrink-Fit Tool Holder & Adapter: SFS12 Taper Shank, 0.5″ Hole Dia 0.87″ Projection, 0.62″ Nose Dia, Through Coolant
• Spade Drill Insert: 29 mm Dia, Series 29, Solid Carbide AM420 Finish, Series 29
• Hydraulic Hose Short Pilot Male Tube-O Swivel 90 ° Elbow: 8 mm, 3/4-18 Steel, Male
• Shrink-Fit Tool Holder & Adapter: SFS12 Taper Shank Through Coolant
• Indexable Grooving Toolholder: TCHR19, 0.1970″ Max Groove Width 0.9840″ Max Depth, Uses TCER 1 to 8, TCFL 1 to 8 & TQCR 1 to 8 Inserts, 0.7500″ Shank Height, 3/4″ Shank Width, No
• Replaceable Tip Drill: 10 to 10.49 mm Drill Dia, 31.5 mm Max Depth, 16 mm Flange Shank Seat Size 10, 95 mm OAL, Through Coolant
• Shrink-Fit Tool Holder & Adapter: SFS12 Taper Shank Through Coolant
• Corner Chamfer End Mill: 20.00 mm Dia, 19.00 mm LOC, 5 Flute, 0.40 mm Chamfer Width, Solid Carbide
• 6.80mm Minor 0.2677″ Minor 10.00mm Major 0.3937″ Major 140&deg General Purpose Solid Carbide Subland Step Drill Bit TiAlNFinish, 48.00mm Flute Length, 90.00mm OAL, N/A
• Replaceable Tip Drill: 7.94 to 8.49 mm Drill Dia, 25.5 mm Max Depth, 12 mm Flange Shank Seat Size 7.94, 84 mm OAL, Through Coolant
• Shrink-Fit Tool Holder & Adapter: SFS12 Taper Shank Through Coolant
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Tap Collet: ER16, 5 mm M5 Tap
• Milling Tip Insert Holder Kits; Kit Type: Indexable Milling; Series: R220.69-XO16; Milling Tip Material: Carbide; Milling Tip Material Grade: MP2501; Milling Tip Coating: TiAlN; Cutting Diameter (Decimal Inch): 3; Overall Length (Decimal Inch): 1.96900; M
• Shrink-Fit Tool Holder & Adapter: SFS12 Taper Shank Through Coolant
• Indexable Grooving Toolholder: TCHPL19, 0.1970″ Max Groove Width 0.9840″ Max Depth, Uses TCER 1 to 8, TCFL 1 to 8 & TQCR 1 to 8 Inserts, 0.7500″ Shank Height, 3/4″ Shank Width, No
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7500; Drill Diameter (Inch): 3/4; Maximum Drill Depth (Decimal Inch): 3.1500; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7
• Indexable High-Feed End Mill: 5/8″ Cut Dia, 0.51″ Modular Shank Uses 2 UNLU Inserts, 0.028″ Max Depth, 0.98″ OAL, Through Coolant
• Indexable Grooving Toolholder: TCHPR19, 0.1970″ Max Groove Width 0.9840″ Max Depth, Uses TCEL 1 to 8, TCFR 1 to 8 & TQCL 1 to 8 Inserts, 0.7500″ Shank Height, 3/4″ Shank Width, No
• Shrink-Fit Tool Holder & Adapter: SFS12 Taper Shank Through Coolant
• Welding Gloves: Leather & Synthetic Leather
• Replaceable Tip Drill: 19 to 19.9 mm Drill Dia, 170 mm Max Depth, 20 mm Straight-Cylindrical Shank Uses DMP Inserts, 257.92 mm OAL, Through Coolant
• Shrink-Fit Tool Holder & Adapter: SFS12 Taper Shank, 0.25″ Hole Dia 0.87″ Projection, 0.37″ Nose Dia, Through Coolant
• Indexable High-Feed End Mill: 5/8″ Cut Dia, 0.6″ Modular Shank Uses 2 UNLU Inserts, 0.028″ Max Depth, 0.83″ OAL, Through Coolant
• Spade Drill Insert: 31 mm Dia, Series 29, Solid Carbide AM420 Finish, Series 29
• Welding Gloves: Leather & Synthetic Leather
• Tap Collet: ER25, 0.22″ #12 to 7/32″ Tap
• Free Standing Retractable Belt Barrier Post: 40″ High, 2.4″ Dia, Aluminum Post Cast Iron, Silver & Yellow
• Indexable High-Feed End Mill: 3/4″ Cut Dia, 0.7283″ Cylindrical Shank Uses 3 UNLU Inserts, 0.032″ Max Depth, 5″ OAL, Through Coolant
• Free Standing Retractable Belt Barrier Post: 40″ High, 2.4″ Dia, Aluminum Post Cast Iron, Silver & Yellow
• Welding Gloves: Leather & Synthetic Leather
• Tap Collet: ER25, 0.194″ #9 to 3/16″ Tap
• Indexable High-Feed End Mill: 20 mm Cut Dia, 0.78 mm Cylindrical Shank Uses 3 UNLU Inserts, 1 mm Max Depth, 130 mm OAL, Through Coolant
• Tap Collet: ER25, 0.168″ #8 to 5/32″ Tap
• Free Standing Retractable Belt Barrier Post: 40″ High, 2.4″ Dia, Aluminum Post Cast Iron, Black, Silver & Yellow
• Cable Tools & Kits; Number of Pieces: 1.0; Number Of Pieces: 1.0
• Tap Collet: ER20, 0.255″ 1/4″ Tap
• Combination Chamfer & Countersink Drills; Maximum Drill Diameter (Decimal Inch): 0.5866 in; Maximum Drill Diameter (mm): 0.5866 in; Minimum Drill Diameter (mm): 0.5709 in; Shank Type: Weldon Flat; Body Shank Diameter (mm): 0.7500 in; Chuck Shank Diameter
• Free Standing Retractable Belt Barrier Post: 40″ High, 2.4″ Dia, Aluminum Post Cast Iron, Silver & Yellow
• Tap Collet: ER20, 0.194″ #9 to 3/16″ Tap
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide AlTiN Coated
• Free Standing Retractable Belt Barrier Post: 40″ High, 2.4″ Dia, Aluminum Post Cast Iron, Red & Silver
• V-Belt: Section CP Rubber, 310
• Tap Collet: ER20, 0.168″ #8 to 5/32″ Tap
• Free Standing Retractable Belt Barrier Post: 40″ High, 2.4″ Dia, Aluminum Post Cast Iron, Red & Silver
• Corner Chamfer End Mill: 14.00 mm Dia, 30.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• M10 Screw 10mm OAL 10mm ID x 16mm OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide TiAlN Coated
• Tap Collet: ER25, 0.367″ 1/2″ Tap
• Free Standing Retractable Belt Barrier Post: 40″ High, 2.4″ Dia, Aluminum Post Cast Iron, Red & Silver
• Drill Adapters; Shank Type: Threaded; Modular Connection; Type: Straight Shank with Flat Adapter; Connection Size: 19.05 mm; Inside Hole Diameter: M12; Through Coolant: Normal Pressure; Nose Diameter: 19.05 mm; Material: Steel; Body Diameter (Decimal Inch
• Tap Collet: ER25, 8 mm M8 Tap
• Corner Chamfer End Mill: 12.00 mm Dia, 28.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• Free Standing Retractable Belt Barrier Post: 40″ High, 2.4″ Dia, Aluminum Post Cast Iron, Black & Silver
• Tap Collet: ER25, 10 mm M10 Tap
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: VB..22.; Toolholder Style: SVUBL; Rake: Positive; Rake Angle: 5; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Diameter (Decimal Inch): 2
• Oil Drain Containers; Type: Oil Drain w/Casters; Container Size: 13 gal (US); 13 Gal.; Overall Height: 0.6299 in; Color: Orange/Black; Fractional Height: 0.6299 in; Container Size: 13 gal (US)
• Push-to-Connect Tube Fitting: 1/2″ Thread, 3/8″ OD Stainless Steel, 290 psi
• Roll: Silicone Rubber, 36″ Wide, Semi-Clear Durometer 40, Plain Backing
• M8x1.25 Coarse 40mm Long 6-Lobe Pin Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Arc Welding Accessories; Accessory Type: Rod Oven Thermometer; For Use With: Hydroguard bench rod ovens
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 63.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 55.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• 1-5/16″ Reamer Diam, Straight Shank, 4-1/2″ Flute Length, Hand Expansion Reamer 10-1/8″ OAL, Right Hand Cut, Left Hand Spiral, High Speed Steel
• Standard Manual Ball Valve: 1″ Pipe, Full Port, Stainless Steel 2-Way Flow & In-Line, Female NPT, 1,000 psi WOG
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 61.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• Vise Jaw Accessory: Jaw Steel, 3.68″ OAL, 2.56″ OAW, 1.19″ OAH, Includes (1) Jaw for 6″ Leveling Tripod Chain Vise (48-22-8698)
• Toner Cartridge: Cyan Use with Brother HL-L3210CW, HL-L3230CDW, HL-L3270CDW, HL-L3290CDW & MFC-L3710CW, MFC-L3750CDW, MFC-L3770CDW
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 64.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• Toner Cartridge: Magenta Use with Brother HL-L3210CW, HL-L3230CDW, HL-L3270CDW, HL-L3290CDW & MFC-L3710CW, MFC-L3750CDW, MFC-L3770CDW
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.2188; Drill Bit Size (Inch): 0.2187; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Four Facet; Overall Length (Decimal Inch): 2.1250; Overall Length (Decim
• Helical Flute Thread Mill: 1/8-27, Internal & External, 4 Flute, 5/16″ Shank Dia, Solid Carbide 27 TPI, 0.31″ Cut Dia, 7/16″ LOC, TiAlN Coated
• Toner Cartridge: Yellow Use with Brother HL-L3210CW, HL-L3230CDW, HL-L3270CDW, HL-L3290CDW & MFC-L3710CW, MFC-L3750CDW, MFC-L3770CDW
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 56.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• Industrial & Laundry Faucets; Type: Base Mount Faucet; Style: Base Mounted; Design: Base Mounted; Handle Type: Knob; Spout Type: Swing Spout/Nozzle; Mounting Centers: Single Hole; Spout Size: 12; Type: Base Mount Faucet; Style: Base Mounted; Type: Base Mo
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 57.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• 0.05 Inch Thick x 12 Inch Wide x 12 Inch Long, Aluminum Sheet Alloy 6061-T6
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 62.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• Indexable Boring Bar: A32SPDUNR1140, 40.00 mm Min Bore, 32.00 mm Shank Dia, N/A Steel Lever Lock & Lock Pin, Uses DNMG33 ™ & DNGG33 ™ Inserts
• Industrial & Laundry Faucets; Type: Base Mount Faucet; Style: Base Mounted; Design: Base Mounted; Handle Type: Knob; Spout Type: Swing Spout/Nozzle; Mounting Centers: Single Hole; Spout Size: 14; Type: Base Mount Faucet; Style: Base Mounted; Type: Base Mo
• All-Purpose Cleaner: 1 gal Bottle, Disinfectant Liquid, Fragrance-Free Scent
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 58.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 59.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 4; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 90, Acrylic Adhesive Backing
• Drill Heads; Series: V46; Head Connection Size: 53.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 60.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 30.00; Drill Head Style: V46; Th
• Drill Heads; Series: MD; Head Connection Size: 6.90 mm; Maximum Drill Diameter (Decimal Inch): 38.00 mm; Maximum Drill Diameter (mm): 38.00 mm; Number Of Non-pilot Inserts Used: 3; Pilot Drill Diameter (mm): 38.00 mm; Pilot Drill Style: Short; Head Length
• Sheet: Neoprene Rubber, 12″ Wide, 12″ Long, Black Durometer 90, Acrylic Adhesive Backing
• Spiral Router Bit: 0.5″ Dia, 1.5″ LOC, 1/2″ Shank Dia, Spiral 4″ OAL, Diamond Finish
• Industrial & Laundry Faucets; Type: Wall Mount Faucet; Style: Wall Mount; Design: Wall Mount; Handle Type: Lever; Spout Type: Swing Spout/Nozzle; Mounting Centers: 8; Spout Size: 12; Finish/Coating: Chrome Plated Satin; Type: Wall Mount Faucet
• Drill Heads; Series: MD; Head Connection Size: 6.90 mm; Maximum Drill Diameter (Decimal Inch): 40.00 mm; Maximum Drill Diameter (mm): 40.00 mm; Number Of Non-pilot Inserts Used: 3; Pilot Drill Diameter (mm): 40.00 mm; Pilot Drill Style: Short; Head Length
• 1-7/8″ Bore Diam, Spring Steel Internal Snap Retaining Ring 1.875″ Free OD, 0.068″ Groove Width x 0.057″ Groove Depth, 0.062″ Ring Thickness
• Industrial & Laundry Faucets; Type: Wall Mount Faucet; Style: Wall Mount; Design: Wall Mount; Handle Type: Lever; Spout Type: Swing Spout/Nozzle; Mounting Centers: 4; Spout Size: 10; Finish/Coating: Chrome Plated Satin; Type: Wall Mount Faucet
• Manual Ball Valve: 2″ Pipe, Standard Port FNPT x FNPT
• Drill Heads; Series: MD; Head Connection Size: 6.90 mm; Maximum Drill Diameter (Decimal Inch): 39.00 mm; Maximum Drill Diameter (mm): 39.00 mm; Number Of Non-pilot Inserts Used: 3; Pilot Drill Diameter (mm): 39.00 mm; Pilot Drill Style: Short; Head Length
• Single Point Tool Bit: 3/8'' Shank Width, 3/4'' Shank Height, Solid Carbide Tipped, RH, GR, Grooving 4'' OAL
• Taper Length Drill Bit: 0.4219″ Dia, 118 ° Bright/Uncoated
• Drill Heads; Series: MD; Head Connection Size: 0.2720 in; Maximum Drill Diameter (Decimal Inch): 1.5620 in; Maximum Drill Diameter (mm): 1.5620 in; Number Of Non-pilot Inserts Used: 3; Pilot Drill Diameter (mm): 1.5620 in; Pilot Drill Style: Short; Head L
• Thread Forming Tap: Metric, 6HX Class of Fit, Semi-Bottoming, High Speed Steel, Diamond-Like Carbon Finish Series CoroTap 400
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: HDJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank W
• Drill Heads; Series: MD; Head Connection Size: 0.2720 in; Maximum Drill Diameter (Decimal Inch): 1.5000 in; Maximum Drill Diameter (mm): 1.5000 in; Number Of Non-pilot Inserts Used: 3; Pilot Drill Diameter (mm): 1.5000 in; Pilot Drill Style: Short; Head L
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: RC..1003; Toolholder Style: PRDCN; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Width
• Drill Heads; Series: MD; Head Connection Size: 6.90 mm; Maximum Drill Diameter (Decimal Inch): 37.00 mm; Maximum Drill Diameter (mm): 37.00 mm; Number Of Non-pilot Inserts Used: 3; Pilot Drill Diameter (mm): 37.00 mm; Pilot Drill Style: Short; Head Length
• Single Point Tool Bit: 3/8'' Shank Width, 3/4'' Shank Height, Solid Carbide Tipped, RH, GR, Grooving 4'' OAL
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: HDUNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank
• Edgers, Trimmers & Cutters; Power Type: Battery; Blade Type: Double-Sided; Cutting Width: 13; Cutting Width (Decimal Inch): 13; Cutting Width (Inch): 13
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: HDJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank
• Indexable Chamfer & Angle Face Mills; Minimum Cutting Diameter (Decimal Inch): 4.0000; Minimum Cutting Diameter (Inch): 4; Maximum Cutting Diameter (Decimal Inch): 4.3000; Maximum Depth of Cut (Decimal Inch): 0.1180; Arbor Hole Diameter (mm): 1.50; Arbor
• Single Point Tool Bit: 3/8'' Shank Width, 3/4'' Shank Height, Solid Carbide Tipped, RH, GR, Grooving 4'' OAL
• Modular Reamer Bodies; Clamping Method: Axial; Shank Diameter (mm): 0.6299; Shank Length (Decimal Inch): 48.00 mm; Overall Length (Decimal Inch): 105.40; Overall Length (mm): 105.40; Cutting Direction: Right Hand; Shank Length (mm): 48.00 mm
• Milling Cartridges & Cassettes; Compatible Insert Style: ON.U; Series: R220; Compatible Insert Size Code: 05; Insert Inscribed Circle (Inch): 0.1970 in; Toolholder Style: R220.48; Type: Cassette; Cutting Direction: Right Hand; Tool Application: Milling; T
• Modular Reamer Bodies; Clamping Method: Axial; Shank Diameter (mm): 0.6299; Shank Length (Decimal Inch): 48.00 mm; Overall Length (Decimal Inch): 97.80; Overall Length (mm): 97.80; Cutting Direction: Right Hand; Shank Length (mm): 48.00 mm
• Milling Cartridges & Cassettes; Compatible Insert Style: ON.U; Series: L220; Compatible Insert Size Code: 09; Insert Inscribed Circle (Inch): 0.3540 in; Toolholder Style: L220.48; Type: Cassette; Cutting Direction: Left Hand; Tool Application: Milling; To
• Sheet: Silicone Rubber, 12″ Wide, 18″ Long, Red Durometer 40, Plain Backing
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Milling Cartridges & Cassettes; Compatible Insert Style: ON.U; Series: R220; Compatible Insert Size Code: 09; Insert Inscribed Circle (Inch): 0.3540 in; Toolholder Style: R220.48; Type: Cassette; Cutting Direction: Right Hand; Tool Application: Milling; T
• Milling Tip Inserts; Milling Tip Type: Profile Mill; Milling Tip Style: XHT; Maximum Depth of Cut (mm): 9.04; Cutting Diameter (mm): 10.00; Tool Material: Carbide; Depth of Cut (mm): 9.04; Manufacturer Grade: SIRA; Chipbreaker: None; Series: XHT740; Coati
• Replaceable Tip Drill: 22 to 22.99 mm Drill Dia, 276 mm Max Depth, 25 mm Flange Shank Seat Size 22, 365 mm OAL, Through Coolant
• Thread Forming Tap: DIN 2174, 6GX Class of Fit, 1.5 to 2P, High Speed Steel, TiN Finish Series TC410
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 3.2120 in; Maximum Cutting Diameter: 4.0000 in; Maximum Depth Of Cut: 0.0787 in; Arbor Hole Diameter (mm): 1.50; Compatible Insert Size Code: 1307; Maximum Ramping Angle: 0.3 ™; Series: DG5P; Cutt
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Powdered Metal High Speed Steel, AlCrN Finish Series TC430
• Roll: Buna-N Rubber, 36″ Wide, White Durometer 60, Acrylic Adhesive Backing
• Sheet: Silicone Rubber, 18″ Wide, 36″ Long, Red Durometer 40, High Temperature Adhesive Backing
• End Mill Holder: BT40 Taper Shank, 12″ Hole Through Coolant
• Drum Unit: Black Use with Phaser 4,622, Phaser 4,600 & 4,620
• Jackets & Coats; Garment Style: Jacket; Size: 3X-Large; Material: Leather; Closure Type: Button; Flame Retardant: Yes; Number Of Pockets: 1.000; Flame Resistant: Yes
• Boring Head Modular Connection Shank: HSK63A, Modular Connection Mount 1.75″ Projection
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: HDNNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 63.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank W
• Vinyl, Heavy-Duty Smooth Surface, 10″ OAL, 10″ Wide
• Modular Turning & Profiling Cutting Unit Head: Size C6, 68 mm Head Length, External, Right Hand 45 mm Center to Cutting Edge, Uses VN.. Inserts, Through Coolant
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: HDUNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank W