Products

• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Die Drill Bit: 0.4134″ Dia, 135 °, Solid Carbide Coated, Series 200
• Traffic Barricades; Type: A-Frame; Barricade Height (Inch): 40; Material: Plastic; Barricade Width (Inch): 29; Reflective: Yes; Compliance: None; Color: White; Weight (Lb.): 6.0000; Top Panel Height (Inch): 8; Top Panel Width (Inch): 72; Additional Inform
• 4″ Screw Standard Flat Washer: Nylon, Uncoated 0.12″ ID, 0.312″ OD, 0.013″ Thick
• Taper Length Drill Bit: 0.2756″ Dia, 143 ° AlTiN Finish, 2.5″ OAL, RH Cut, Helical Flute, Straight Shank, Series K256
• Taper Length Drill Bit: 0.5000″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Extended; Pushbutton Shape: Round; Pushbutton Color: Red; Green; Operator Illumination: NonIlluminated; Operation Type: Momentary (MO); Amperage (mA): 10; Voltage: 12-24; Contact Form: DPDT;
• Metering Pump Accessories; Type: Pump Repair Kit; For Use With: CP250V300CRBR; Length (Decimal Inch): 7.0000; For Use With: CP250V300CRBR
• Taper Length Drill Bit: 0.4219″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Taper Length Drill Bit: 0.2813″ Dia, 143 ° AlTiN Finish, 2.87″ Flute Length, 4.51″ OAL, RH Cut, Helical Flute, Straight Shank, Series K256
• Air Actuator Accessories; Actuator Accessory Type: Rotary Manifold; For Use With: Magnetic Piston; M/60216/M/180 20mm; For Use With: Magnetic Piston; M/60216/M/180 20mm
• Taper Length Drill Bit: 0.4724″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• 2″ Screw Standard Flat Washer: Nylon, Uncoated 0.097″ ID, 0.312″ OD, 0.007″ Thick
• 180 Grit Aluminum Oxide Square Polishing Stone Very Fine Grade, 1″ Wide x 6″ Long x 1″ Thick
• 320 Grit Aluminum Oxide Square Polishing Stone Extra Fine Grade, 1″ Wide x 6″ Long x 1″ Thick
• 5/16″ Screw Standard Flat Washer: Nylon, Uncoated 0.323″ ID, 0.483″ OD, 0.013″ Thick
• Standard Flat Washer: Nylon, Uncoated 0.067″ ID, 1/4″ OD, 0.013″ Thick
• Kyocera MFWN90100R 05 8T M Metric Bore Diameter, Course Pitch, 8 Flute, 90 Degree Face Mill with a 100.00mm Cutting Diameter for Shouldering, Slotting, Facing, Plunging Applications
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.1574 in; Shank Type: Modular; Toolholder Style: 15B8E; Shank Diameter (Inch): 0.5000; Shank Diameter (mm): 0.5000; Maximum Ramping Angle: 3 ™; Compatible Insert Style: RJET; Compatible Insert Size Code: 0
• Kyocera MFWN90100R 05 8T Inch Bore Diameter, Course Pitch, 8 Flute, 90 Degree Face Mill with a 3.9370 Cutting Diameter for Shouldering, Slotting, Facing, Plunging Applications
• Indexable Thread Mills; Cutting Diameter: 0.3750 in; Maximum Hole Depth (Decimal Inch): 0.5500 in; Maximum Hole Depth (mm): 0.5500 in; Maximum Cutting Length: 0.4720 in; Compatible Insert Style: LYEU; Compatible Insert Size Code: 21..; Toolholder Style: M
• 5″ Screw Standard Flat Washer: Nylon, Uncoated 0.145″ ID, 0.265″ OD, 0.013″ Thick
• Indexable Thread Mills; Cutting Diameter: 0.5000 in; Maximum Hole Depth (Decimal Inch): 0.7000 in; Maximum Hole Depth (mm): 0.7000 in; Maximum Cutting Length: 0.5510 in; Compatible Insert Style: LYEU; Compatible Insert Size Code: 14..; Toolholder Style: M
• Indexable Thread Mills; Cutting Diameter: 0.3900 in; Maximum Hole Depth (Decimal Inch): 0.6400 in; Maximum Hole Depth (mm): 0.6400 in; Maximum Cutting Length: 0.4720 in; Compatible Insert Style: LYEU; Compatible Insert Size Code: 14..; Toolholder Style: M
• Corner Chamfer End Mill: 12.00 mm Dia, 16.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• 8″ Screw Standard Flat Washer: Nylon, Uncoated 0.187″ ID, 5/8″ OD, 0.013″ Thick
• Indexable Cut-Off Blade Tool Blocks; Tool Block Style: TTBN; Compatible Blade Height: 1.0200 in; Compatible Blade Width: 0.0390 in; Shank Height: 0.7500 in; Shank Width: 0.7500 in; Overall Width: 1; Shoulder Height: 0.8400 in; Complete Blade Compatibility
• 5mm Minor 8mm Major 15mm Step Length 135° Solid Carbide Subland Step Drill Bit Bright/Uncoated, 39mm Flute Length, 36mm OAL, Series CoroDrill 430
• Replaceable Tip Drill: 14 to 14.4 mm Drill Dia, 200 mm Max Depth, Modular Connection Shank Uses HCP Inserts, 287.5 mm OAL, Through Coolant
• Extension Tap: 1/2-13, 3 Flutes, TiCN Finish, Cobalt, Long Reach 2-3 P, 8.82″ OAL, 0.984″ Thread Length, 2B & 3B Class of Fit
• 2″ Screw Standard Flat Washer: Nylon, Uncoated 0.097″ ID, 0.312″ OD, 0.012″ Thick
• Replaceable Tip Drill: 14.5 to 14.9 mm Drill Dia, 200 mm Max Depth, Modular Connection Shank Uses HCP Inserts, 287.5 mm OAL, Through Coolant
• Helical Flute Thread Mill: Internal, 5 Flute, Solid Carbide 0.0945″ Cut Dia, TiCN Coated
• Extension Tap: 1/2-20, 3 Flutes, TiCN Finish, Cobalt, Long Reach 2-3 P, 7.87″ OAL, 0.866″ Thread Length, 2B & 3B Class of Fit
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.061″ Cut Dia, TiCN Coated
• Corner Chamfer End Mill: 14.00 mm Dia, 16.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• Corner Chamfer End Mill: 16.00 mm Dia, 19.00 mm LOC, 5 Flute, 0.35 mm Chamfer Width, Solid Carbide
• Helical Flute Thread Mill: Internal, 3 Flute, Solid Carbide 0.0472″ Cut Dia, TiCN Coated
• Floor Pads, Bonnets & Screens; Type: Scrubbing Brush; Pad Diameter: 19 in; Pad Color: Black; Grit Grade: Non-Abrasive; Machine Size (Inch): 20; Trim Length (Inch): 1-1/2; Included Accessories: Lugs Attachment; Applications: General Scrubbing; Application:
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.0551″ Cut Dia, TiCN Coated
• Corner Chamfer End Mill: 16.00 mm Dia, 35.00 mm LOC, 5 Flute, 0.35 mm Chamfer Width, Solid Carbide
• 6″ Screw Standard Flat Washer: Nylon, Uncoated 0.171″ ID, 1/4″ OD, 0.013″ Thick
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.0768″ Cut Dia, TiCN Coated
• Sheet: Polyurethane Rubber, 12″ Wide, 36″ Long, Amber Durometer 60, Acrylic Adhesive Backing
• Balancing Rings For Indexables; Type: Balancing Ring; Indexable Tool Type: Standard Tool Holder; For Use With: 31mm Shank Diameter
• Lathe Spindles & Spindle Accessories; Product Type: Octagon Solid Finger Feed
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.1574 in; Shank Type: Cylindrical; Toolholder Style: 15B8E; Shank Diameter (Inch): 0.6250; Shank Diameter (mm): 0.6250; Maximum Ramping Angle: 3.5 ™; Compatible Insert Style: RJET; Compatible Insert Size C
• Standard-Duty Shock Absorber: 4 mm Rod Dia, 19.6 mm OD, 10 mm Stroke, M14 x 1.5 Thread 98.2 mm OAL, 9.8 lb Force
• 7/16″ Screw Standard Flat Washer: Nylon, Uncoated 0.473″ ID, 5/8″ OD, 0.007″ Thick
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 1.3240 in; Maximum Cutting Diameter: 2.0000 in; Maximum Depth Of Cut: 0.0980 in; Arbor Hole Diameter (mm): 0.75; Compatible Insert Size Code: 1207; Maximum Ramping Angle: 0.6 ™; Series: DG2H; Cutt
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 50, Plain Backing
• 4″ Screw Standard Flat Washer: Nylon, Uncoated 1/8″ ID, 0.312″ OD, 0.013″ Thick
• Welded Bandsaw Blade: 14' 6″ Long, 1-1/4″ Wide, 0.042″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 1.5830 in; Maximum Cutting Diameter: 2.0000 in; Maximum Depth Of Cut: 0.0600 in; Arbor Hole Diameter (mm): 0.75; Compatible Insert Size Code: 0905; Maximum Ramping Angle: 0.6 ™; Series: TG2Q; Cutt
• Welded Bandsaw Blade: 14' 6″ Long, 1-1/4″ Wide, 0.042″ Thick, 5 to 7 TPI Bi-Metal, Toothed Edge
• Sheet: Buna-N Rubber, 1″ Thick, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• 1″ Screw Standard Flat Washer: Nylon, Uncoated 1.073″ ID, 1.201″ OD, 0.013″ Thick
• Indexable Threading Toolholder: External, Right Hand, 1 x 1″ Shank Series SER
• Corner Chamfer End Mill: 18.00 mm Dia, 19.00 mm LOC, 5 Flute, 0.35 mm Chamfer Width, Solid Carbide
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• ER: ER32, Through Coolant
• 1/4″ Screw Standard Flat Washer: Nylon, Uncoated 0.251″ ID, 0.373″ OD, 0.009″ Thick
• Helical Flute Thread Mill: 1/2-13, Internal & External, 4 Flute, 3/8″ Shank Dia, Solid Carbide 13 TPI, 0.35″ Cut Dia, 7/8″ LOC, 3″ OAL, Bright/Uncoated
• Butterfly Valves; Pipe Size: 3; Handle Type: Lever; Body Material: GFPP; Seat Material: Nitrile; Material Grade: ASTM D4101 Cell Class 85580; Disc Material: GFPP; Stem Material: 316 Stainless Steel; Minimum Order Quantity: Nitrile Liner and Seals; Materia
• Black 90 ° Elbow: 1″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Acrylic Adhesive Backing
• 2″ Screw Standard Flat Washer: Nylon, Uncoated 0.089″ ID, 0.312″ OD, 0.013″ Thick
• Replaceable Tip Drill: 0.9055 to 0.9409'' Drill Dia, 7.5625″ Max Depth, 1'' Shank Seat Size 0.2780, Through Coolant
• Replaceable Tip Drill: 0.8661 to 0.9016'' Drill Dia, 7.25″ Max Depth, 1'' Shank Seat Size 0.2780, Through Coolant
• 5″ Screw Standard Flat Washer: Nylon, Uncoated 0.145″ ID, 0.271″ OD, 0.013″ Thick
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Modular Tool Holding System Adapter: 67 mm Projection, 60 mm Body Dia, Through Coolant
• 3/8″ Screw Standard Flat Washer: Nylon, Uncoated 0.385″ ID, 0.653″ OD, 0.013″ Thick
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• 1″ Screw Standard Flat Washer: Nylon, Uncoated 1.005″ ID, 1.25″ OD, 0.007″ Thick
• Indexable High-Feed End Mill: 16 mm Cut Dia, Modular Shank Uses 2 UNLU Inserts, 0.7 mm Max Depth, 25 mm OAL, Through Coolant
• Taper Shank Drill Bit: 0.6496″ Dia, 2MT, 118 °, High Speed Steel Oxide Finish, 9.0551″ Flute Length, 13.9764″ OAL, N Point, Spiral Flute
• Taper Shank Drill Bit: 0.6563″ Dia, 3MT, 118 °, Cobalt Bright/Uncoated, 10.375″ OAL, Standard Point, Spiral Flute
• Rail Mount Kits & Parts; Type: Ladder Connector
• Penetrant & Lubricant: 15 oz Aerosol Can Clear
• Helical Flute Thread Mill: #1, Internal, 4 Flute, Solid Carbide 11-1/2 TPI, TiAlN Coated
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.8071; Drill Diameter (mm): 20.50; Maximum Drill Depth (mm): 105.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• 7/8″ Screw Standard Flat Washer: Nylon, Uncoated 0.893″ ID, 1.13″ OD, 0.013″ Thick
• Closed Cell EPDM Foam: 36″ Wide, 36″ Long, Black Plain Backing
• Lathe Chuck Accessories; Accessory Type: Joint Handle; Product Compatibility: BL208; Chuck Diameter Compatibility (Decimal Inch): 8.0000
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.8858; Drill Diameter (mm): 22.50; Maximum Drill Depth (mm): 115.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• Cordless Nailers; Voltage: 20.00; Nailer Type: Brad Nailer; Nail Length: 2 in; Nail Shank Diameter: 2 in; Battery Series: 20V MAX*; Batteries Included: No; Number Of Batteries Included: 0; Battery Voltage: 20.00; Overall Height: 11.56 in; Overall Length:
• 5/8″ Screw Standard Flat Washer: Nylon, Uncoated 0.64″ ID, 0.905″ OD, 0.012″ Thick
• Collet Chuck: 0.5 to 10 mm Capacity, ER Collet, 20 mm Shank Dia, Double End Straight Shank 55 mm Projection, 0.003 mm TIR
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.9055; Drill Diameter (mm): 23.00; Maximum Drill Depth (mm): 115.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• Lavatory Faucets; Type: Service Sink Faucet with Bottom Brace & Offset Shanks; Inlet Location: Back; Spout Type: Standard; Inlet Pipe Size: 1/2 in; Design: Two Handle; Inlet Gender: Female; Handle Type: Wrist Blade; Maximum Flow Rate: 2.2; Mounting Center
• Closed Cell EVA Foam: 36″ Wide, Black Acrylic Adhesive Backing
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.8465; Drill Diameter (mm): 21.50; Maximum Drill Depth (mm): 110.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• Helical Flute Thread Mill: Internal & External, 4 Flute, Solid Carbide TiAlN Coated
• 10″ Screw Standard Flat Washer: Nylon, Uncoated 0.2″ ID, 3/8″ OD, 0.013″ Thick
• Helical Flute Thread Mill: 7/8, Internal & External, 4 Flute, Solid Carbide TiAlN Coated
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.8661; Drill Diameter (mm): 22.00; Maximum Drill Depth (mm): 110.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• Wet & Dry Cut Saw Blade: 8″ Dia, 7/8 & 5/8″ Arbor Hole, 0.09″ Kerf Width, 1 Teeth High Speed Steel Teeth, Use on Ceramic Tile, Standard Arbor
• Helical Flute Thread Mill: #1, Internal & External, 4 Flute, Solid Carbide TiAlN Coated
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.8268; Drill Diameter (mm): 21.00; Maximum Drill Depth (mm): 105.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• Indexable Boring Bar: A40T-PCLNL12-D500, 50.00 mm Min Bore, 40.00 mm Shank Dia, 95.00&deg N/A Steel 300.0000″ OAL, Lever,
• 4″ Screw Standard Flat Washer: Nylon, Uncoated 0.129″ ID, 0.312″ OD, 0.013″ Thick
• Helical Flute Thread Mill: Internal & External, 4 Flute, 5/8″ Shank Dia, Solid Carbide 0.62″ Cut Dia, 1-3/8″ LOC, TiAlN Coated
• Indexable Broaching Accessories; Accessory Type: Square Tool Holder Adapter; For Use With: 25MM & 32MM Tool Holders; Additional Information: 32X40X100MM
• Vinyl, Heavy-Duty Smooth Surface, 8″ OAL, 8″ Wide
• Indexable Broaching Accessories; Accessory Type: Square Tool Holder Adapter; For Use With: 25MM & 32MM Tool Holders; Additional Information: 25X35X90MM
• Vinyl, Heavy-Duty Smooth Surface, 8″ OAL, 8″ Wide
• Helical Flute Thread Mill: Internal & External, 5 Flute, 5/8″ Shank Dia, Solid Carbide 0.62″ Cut Dia, 1.418″ LOC, TiAlN Coated
• 3/8″ Screw Standard Flat Washer: Nylon, Uncoated 0.412″ ID, 0.788″ OD, 0.013″ Thick
• Vinyl, Heavy-Duty Smooth Surface, 10″ OAL, 8″ Wide
• Helical Flute Thread Mill: 7/8, Internal & External, 5 Flute, Solid Carbide TiAlN Coated
• Sheet: Silicone Rubber, 12″ Wide, 36″ Long, Red Durometer 60, High Temperature Adhesive Backing
• Vinyl, Heavy-Duty Smooth Surface, 8″ OAL, 8″ Wide
• Helical Flute Thread Mill: #1, Internal & External, 6 Flute, 5/8″ Shank Dia, Solid Carbide 0.62″ Cut Dia, 1-3/8″ LOC, TiAlN Coated
• 1/4″ Screw Standard Flat Washer: Nylon, Uncoated 0.253″ ID, 0.43″ OD, 0.013″ Thick
• Vinyl, Heavy-Duty Smooth Surface, 8″ OAL, 8″ Wide
• Helical Flute Thread Mill: #1, Internal & External, 4 Flute, 5/8″ Shank Dia, Solid Carbide 0.62″ Cut Dia, 1.546″ LOC, TiAlN Coated
• Shower Supports & Kits; Type: Apron Bathtub; Type: Apron Bathtub; Length (Inch): 60; Length (Inch): 60; Material: Enameled Steel; Finish/Coating: White; Finish Coating: White; Material: Enameled Steel
• Vinyl, Heavy-Duty Smooth Surface, 8″ OAL, 8″ Wide
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Wide Inner Ring; Bolt Hole (Center-to-center): 95 mm; Housing Material: Stainless Steel; Lock Type: Set Screw; Static Load Capacity: 1225.00; Number Of Bolts: 2; Maximum RPM: 6490.000; Series: UCPSS;
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Shower Supports & Kits; Type: Apron Bathtub; Type: Apron Bathtub; Length (Inch): 60; Length (Inch): 60; Material: Enameled Steel; Finish/Coating: White; Finish Coating: White; Material: Enameled Steel
• Helical Flute Thread Mill: #1, Internal & External, 4 Flute, Solid Carbide TiAlN Coated
• 5/16″ Screw Standard Flat Washer: Nylon, Uncoated 0.318″ ID, 0.47″ OD, 0.013″ Thick
• Helical Flute Thread Mill: #1, Internal, 4 Flute, Solid Carbide TiAlN Coated
• 4″ Screw Standard Flat Washer: Nylon, Uncoated 0.116″ ID, 0.281″ OD, 0.013″ Thick
• Helical Flute Thread Mill: #1, Internal & External, 4 Flute, Solid Carbide 11-1/2 TPI, TiAlN Coated
• 5″ Screw Standard Flat Washer: Nylon, Uncoated 0.145″ ID, 1/4″ OD, 0.013″ Thick
• Replaceable Tip Drill: 25 to 25.5 mm Drill Dia, 130 mm Max Depth, 32 mm Straight-Cylindrical Shank Seat Size 25, 226 mm OAL, Through Coolant
• Helical Flute Thread Mill: Internal & External, 5 Flute, Solid Carbide TiAlN Coated
• Helical Flute Thread Mill: Internal & External, 4 Flute, 5/8″ Shank Dia, Solid Carbide 0.62″ Cut Dia, 1.516″ LOC, TiAlN Coated
• 10″ Screw Standard Flat Washer: Nylon, Uncoated 0.208″ ID, 0.312″ OD, 0.007″ Thick
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: VN..2.53.; Toolholder Style: TVJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Wi
• Bar Puller Parts & Accessories; Accessory Type: Gripper; Accessory Type: Gripper; Jaw Type: Self Activating/Slotted Jaw Set; Compatible Bar Puller: Bar Puller Kits; Compatible Bar Puller: Bar Puller Kits; Gripper Size: 1.8125 in; Adapter Size: 1; Shank Di
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: VN..2.53.; Toolholder Style: TVJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Wid
• Guhring GH305.0500.600.90.08.L External Left Hand Face Grooving 90 Deg Offset Non Coolant Holder 1/2″ Square Shank
• Emergency Light Assemblies; Type: Led Work Light; Flash Rate: Variable; Mount: Surface; Color: White; Power Source: 12 Volt DC
• Bar Puller Parts & Accessories; Accessory Type: Gripper; Accessory Type: Gripper; Jaw Type: Self Activating/Slotted Jaw Set; Compatible Bar Puller: Bar Puller Kits; Compatible Bar Puller: Bar Puller Kits; Gripper Size: 1.9375 in; Adapter Size: 1; Shank Di
• 8″ Screw Standard Flat Washer: Nylon, Uncoated 0.194″ ID, 0.312″ OD, 0.007″ Thick
• Guhring GH305.0500.500.90.08.R External Right Hand Face Grooving 90 Deg Offset Non Coolant Holder 1/2″ Square Shank
• Bar Puller Parts & Accessories; Accessory Type: Gripper; Accessory Type: Gripper; Jaw Type: Self Activating/Slotted Jaw Set; Compatible Bar Puller: Bar Puller Kits; Compatible Bar Puller: Bar Puller Kits; Gripper Size: 1.6875 in; Adapter Size: 1; Shank Di
• Emergency Light Assemblies; Type: Led Work Light; Flash Rate: Variable; Mount: Surface; Color: White; Power Source: 12 Volt DC
• 3/8″ Screw 1-1/4″ OAL 0.38″ ID x 3/4″ OD Round Stainless Steel Circuit Board Spacers Passivated, Grade 316, Female Unthreaded
• Bar Puller Parts & Accessories; Accessory Type: Gripper; Accessory Type: Gripper; Jaw Type: Self Activating/Slotted Jaw Set; Compatible Bar Puller: Bar Puller Kits; Compatible Bar Puller: Bar Puller Kits; Gripper Size: 1.5625 in; Adapter Size: 1; Shank Di
• 5″ Screw Standard Flat Washer: Nylon, Uncoated 0.141″ ID, 1/4″ OD, 0.009″ Thick
• Latex Tube: 3/8″ ID, 5/8″ OD, 25' Long 40 Max psi, Yellow
• Steam 'N Clean Steam cleaner and stripper
• Modular Reamer Heads; Model Number Compatibility: PMX5; Head Diameter (mm): 32.0000; Reamer Finish/Coating: Coated; (TiAlN); TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 0.4720; Hole Tolerance: +/- 0.0004; Spiral Direction: Neutral; Cutting Di
• Replaceable Tip Drill: 21 to 21.9 mm Drill Dia, 36.05 mm Max Depth, 25 mm Flatted Shank Uses H3P Inserts, 130.8 mm OAL, Through Coolant
• 8″ Screw Standard Flat Washer: Nylon, Uncoated 0.187″ ID, 0.606″ OD, 0.013″ Thick
• Replaceable Tip Drill: 22 to 22.9 mm Drill Dia, 37.69 mm Max Depth, 25 mm Flatted Shank Uses H3P Inserts, 134.62 mm OAL, Through Coolant
• Axial Clamp Straight Shank Modular Reamer Body 2.205″ Shank Length, 6.299″ OAL, Right Hand Cut
• 6″ Screw Standard Flat Washer: Nylon, Uncoated 0.15″ ID, 0.312″ OD, 0.013″ Thick
• 220 Grit Aluminum Oxide Square Polishing Stone Coarse/Medium Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick, Oil Filled
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• 6″ Screw Standard Flat Washer: Nylon, Uncoated 0.156″ ID, 1/2″ OD, 0.013″ Thick
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Please Wait Here Round, Black on Yellow, Use for Exit, Entrance & Directional
• 1/2″ Screw Standard Flat Washer: Nylon, Uncoated 0.515″ ID, 0.905″ OD, 0.013″ Thick
• Arc Flash Clothing Kit: Size Large, Cotton, Coat, Hoods & Leggings
• Sheet: Silicone Rubber, 18″ Wide, 18″ Long, Red Durometer 40, Plain Backing
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6560; Drill Diameter (Inch): 21/32; Maximum Drill Depth (Decimal Inch): 2.6770; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0
• 8″ Screw Standard Flat Washer: Nylon, Uncoated 0.187″ ID, 3/8″ OD, 0.013″ Thick
• Plastic Sheet: Ultem Polyetherimide, 3/4″ Thick, 6″ Long, Amber, 15,200 psi Tensile Strength Rockwell M-109
• 50' x 8' Polyethylene Privacy Screen with Shade Cloth Nickle-Plated Grommets, Fasten with Zip Ties
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6250; Drill Diameter (Inch): 5/8; Maximum Drill Depth (Decimal Inch): 2.5200; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7500; Drill Diameter (Inch): 3/4; Maximum Drill Depth (Decimal Inch): 3.9370; Shank Type: Weldon; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Drill Diameter
• 3/8″ Screw Standard Flat Washer: Nylon, Uncoated 0.385″ ID, 1/2″ OD, 0.013″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.5620; Drill Diameter (Inch): 9/16; Maximum Drill Depth (Decimal Inch): 2.3620; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.
• 1/4″ Screw Standard Flat Washer: Nylon, Uncoated 0.253″ ID, 0.51″ OD, 0.012″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.5930; Drill Diameter (Inch): 19/32; Maximum Drill Depth (Decimal Inch): 2.5200; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0
• Plastic Sheet: Polytetrafluoroethylene, 1″ Thick, White, 3,500 psi Tensile Strength Shore D-55
• Carpet Antifoam Carpet Care
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7650; Drill Diameter (Inch): 49/64; Maximum Drill Depth (Decimal Inch): 3.9370; Shank Type: Weldon; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Drill Diamete
• Drawing & Blanking Fluid: 5 gal Bucket Use on Ferrous Metal & Non-Ferrous Metal, Hazy Dark Brown
• 1/4″ Screw Standard Flat Washer: Nylon, Uncoated 0.281″ ID, 7/8″ OD, 0.013″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7810; Drill Diameter (Inch): 25/32; Maximum Drill Depth (Decimal Inch): 3.9370; Shank Type: Weldon; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Drill Diamete
• Drawing & Blanking Fluid: Bottle Use on Ferrous Metal & Non-Ferrous Metal, Hazy Dark Brown
• Strip: Neoprene Rubber, 6″ Wide, 120″ Long, Black Durometer 40, Acrylic Adhesive Backing
• 8″ Screw Standard Flat Washer: Nylon, Uncoated 0.194″ ID, 0.459″ OD, 0.013″ Thick
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Sheet: Silicone Rubber, 24″ Wide, 36″ Long, Red Durometer 60, Plain Backing
• Cordless Tool Combination Kit: 20V CMCD721 Hammerdrill, CMCF820 Impact Driver, (2) CMCB202 V20 20V MAX 2.0Ah Lithium Ion Battery, V20 20V MAX Lithium Ion Charger, Storage Bag, Tool Bag
• Condensate Systems; Type: High Temperature Condensate Pump; Voltage: 115 VAC; Tank Capacity: 1 Gal.; GPM: 9.58; Outlet Size: 3/8″ Barbed; Gpm: 9.58; GPM @ 10 Feet of Head: 320; GPM @ 5 Feet of Head: 350; Frequency (Hz - 0 Decimals): 60; Horsepower: 1/8; F
• 5″ Screw Standard Flat Washer: Nylon, Uncoated 0.141″ ID, 0.281″ OD, 0.013″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.0866; Drill Diameter (mm): 53.00; Maximum Drill Depth (mm): 106.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.0472; Drill Diameter (mm): 52.00; Maximum Drill Depth (mm): 104.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Cordless Tool Combination Kit: 20V CMCD700 Drill/Driver, CMCS500 Circular Saw, Double Sided Bit, 6-1/2-In 18T Carbide Tip Blade, Hex Wrench, (2) 20V MAX CMCB201 (1.5AH) Lithium Ion Batteries, 20V MAX Lithium Ion CMCB100 Desktop Charger
• 3/8″ Screw Standard Flat Washer: Nylon, Uncoated 3/8″ ID, 1.25″ OD, 0.007″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.1654; Drill Diameter (mm): 55.00; Maximum Drill Depth (mm): 110.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Cordless Tool Combination Kit: 20V CMCD710 Drill/Driver, CMCF810 Brushless Impact Driver, (2) V20 20V MAX Lithium Ion Battery, V20 20V MAX Lithium Ion Charger, Storage Bag, Tool Bag
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.1260; Drill Diameter (mm): 54.00; Maximum Drill Depth (mm): 108.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• 4″ Screw Standard Flat Washer: Nylon, Uncoated 0.129″ ID, 1/4″ OD, 0.013″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.0079; Drill Diameter (mm): 51.00; Maximum Drill Depth (mm): 102.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• 1/4″ Screw Standard Flat Washer: Nylon, Uncoated 0.253″ ID, 3/8″ OD, 0.013″ Thick
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Acrylic Adhesive Backing
• 1 8-Piece Kit 2.7″ Deep x 4″ Wide x 5.7″ High Portable & Wall Mount Group Lockout Box Red, 12 Padlocks
• Combination Hand Tool Sets; Set Type: Socket Set; Container Type: Blow Mold Case; Measurement Type: Inch & Metric; Container Material: Plastic; Drive Size: 1/4; Insulated: No; Hex Size (mm): 4; Case Type: Blow Mold Case
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Key-to-Reset Button; Pushbutton Shape: Round; Pushbutton Color: Red; Operator Illumination: Illuminated; Amperage (mA): 10; Voltage: 120-230 VAC; 30 VDC; Contact Form: 1NO/1NC; Standards Met:
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.0900 in; Maximum Cutting Diameter: 2.5000 in; Maximum Depth Of Cut: 0.0600 in; Arbor Hole Diameter (mm): 0.75; Compatible Insert Size Code: 0904; Maximum Ramping Angle: 0.8 ™; Series: TG1G; Cutt
• Indexable High-Feed End Mill: Modular Connection Shank Uses 3 LPGT Inserts, 0.5 mm Max Depth, 31.5 mm OAL, Through Coolant
• 1/4″ Screw Standard Flat Washer: Nylon, Uncoated 0.267″ ID, 3/8″ OD, 0.007″ Thick
• Indexable Square-Shoulder End Mill: MEV20S18061502T, 0.7874'' Cut Dia, Cylindrical Shank Uses 2, Through Coolant, 150.00 mm OAL
• Plastic Sheet: Acetal, 2″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• 1/4″ Screw Standard Flat Washer: Nylon, Uncoated 0.312″ ID, 3/4″ OD, 0.007″ Thick
• Kyocera S20DRV155M304, DRV Magic Drill 15.50mm Cutting Diameter, 20.00mm Shank Diameter, 3xD, Coolant-Through Indexable Insert Drill
• Kyocera S20DRV150M304, DRV Magic Drill 15.00mm Cutting Diameter, 20.00mm Shank Diameter, 3xD, Coolant-Through Indexable Insert Drill
• Social Distancing Partition: 48″ OAW, 36″ OAH, Plastic, Clear Clear, Plastic, 1/4″ Thick
• Standard Flat Washer: Nylon, Uncoated 0.067″ ID, 0.281″ OD, 0.013″ Thick
• Kyocera S20DRV145M304, DRV Magic Drill 14.50mm Cutting Diameter, 20.00mm Shank Diameter, 3xD, Coolant-Through Indexable Insert Drill
• Arc Welding Cables; Type: Cable; Cable Length (Feet): 7
• Sheet: Silicone Rubber, 24″ Wide, 36″ Long, Red Durometer 50, Plain Backing
• Social Distancing Partition: 60″ OAW, 24″ OAH, Plastic, Clear Clear, Plastic, 1/4″ Thick
• Social Distancing Partition: 36″ OAW, 24″ OAH, Plastic, Clear Clear, Plastic, 1/4″ Thick
• 2″ Screw Standard Flat Washer: Nylon, Uncoated 0.093″ ID, 0.265″ OD, 0.007″ Thick
• Social Distancing Partition: 60″ OAW, 48″ OAH, Plastic, Clear Clear, Plastic, 1/4″ Thick
• 8″ Screw Standard Flat Washer: Nylon, Uncoated 0.194″ ID, 3/8″ OD, 0.007″ Thick
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 25' Long x 12' Wide, 16 mil Polyethylene, Rectangle
• 10″ Screw Standard Flat Washer: Nylon, Uncoated 0.2″ ID, 0.46″ OD, 0.007″ Thick
• Indexable Boring Bar: A16Q-STFCR1103-D180, 18.00 mm Min Bore, 16.00 mm Shank Dia, 91.00&deg N/A Steel 180.0000″ OAL, Screw,
• Indexable Boring Bar: A10-SVJCR2-D16, 142.00&deg N/A Steel 7.0000″ OAL, Screw,
• Indexable Ball Nose End Mills; Milling Diameter: 1.2500 in; Maximum Depth Of Cut: 0.6250 in; Shank Diameter: 1.1300 in; Shank Type: Modular; Compatible Insert Style: NNET; Compatible Insert Size Code: 3105; Toolholder Style: 1BW7X; Series: 1BW7; Overall L
• Standard Flat Washer: Nylon, Uncoated 0.067″ ID, 1/4″ OD, 0.007″ Thick
• Indexable Grooving Toolholder: KGDR1212JX13D16, External Right Hand, No
• Indexable High-Feed End Mill: 1-1/2″ Cut Dia, 1.14″ Modular Shank Uses 6 UNLU Inserts, 0.043″ Max Depth, 1.57″ OAL, Through Coolant
• Indexable Grooving Toolholder: KGDL1212JX13D16, External Left Hand, No
• Replaceable Tip Drill: 24 to 24.9 mm Drill Dia, 41.21 mm Max Depth, 32 mm Straight-Cylindrical Shank Uses H3P Inserts, 145.54 mm OAL, Through Coolant
• Indexable Grooving Toolholder: KGDL1010JX15D16, External Left Hand, No
• Replaceable Tip Drill: 23 to 23.9 mm Drill Dia, 39.41 mm Max Depth, 32 mm Straight-Cylindrical Shank Uses H3P Inserts, 142 mm OAL, Through Coolant
• Indexable Grooving Toolholder: KGDR1212JX15D16, External Right Hand, No
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Sheet: Neoprene Rubber, 24″ Wide, 56″ Long, Black Durometer 70, Plain Backing
• Indexable Boring Bar: A16Q-SDUPL07-D220-P, 22.00 mm Min Bore, 16.00 mm Shank Dia, 93.00&deg N/A Steel 180.0000″ OAL, Screw,
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX11.R
• Indexable Boring Bar: A16Q-SDUPR07-D220-P, 22.00 mm Min Bore, 16.00 mm Shank Dia, 93.00&deg N/A Steel 180.0000″ OAL, Screw,
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX10.R
• Indexable Boring Bar: A16Q-SDQPR07-D220-P, 22.00 mm Min Bore, 16.00 mm Shank Dia, 45.00&deg N/A Solid Carbide 180.0000″ OAL, Screw,
• Cordless Tool Combination Kit: 18V (2) 18V RED Lithium-Ion Batteries, Carrying Case, Charger, 50Pc Bit/Socket Impact Drill Drive Set
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX11.R
• Boring & Grooving Bar Holders; Inside Diameter (mm): 4.00; Outside Diameter: 20.00; Overall Length (mm): 55.00; Head Diameter (mm): 18.50; Shank Length (Inch): 1; Overall Length: 55.0 mm
• Arc Flash Clothing Kit: Size Large, Cotton, Coat, Hoods & Leggings
• Helical Flute Thread Mill: 1-11-1/2, Internal & External, 5 Flute, 3/4″ Shank Dia, Solid Carbide 11-1/2 TPI, 0.62″ Cut Dia, 1-1/8″ LOC, TiAlN Coated
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX13.R
• Sheet: Neoprene Rubber, 36″ Wide, 60″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Stripper: 5 gal Pail, Use On Floors Hard Floor Care
• Plastic Sheet: High Density Polyethylene, 3/8″ Thick, Opaque White, 4,000 psi Tensile Strength Shore D-60
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1″ Thick, White
• Drill Cartridges; Series: D60; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Insert Style: SOGX; Insert Style (Finishing Insert): SOGX12.R