Products

• Garden Hose Fittings & Repair Kits; Connector Type: Female Hose to Male Hose; Compatible Hose Diameter: .75; Material: Brass; Inside Diameter (Decimal Inch): .75; Material: Brass
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 16.2 mm OD, 10 mm Stroke, M12 x 1 Thread 60 mm OAL, 9.8 lb Force
• Taper Shank Drill Bit: 0.4134″ Dia, 1MT, 130 °, High Speed Steel Bright/Uncoated & Oxide, 9.252″ Flute Length, 14.1732″ OAL, Cone Relief Point, Parabolic Flute
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 16.2 mm OD, 10 mm Stroke, M12 x 1 Thread 60 mm OAL, 9.8 lb Force
• Corner Radius End Mill: 3/8" Dia, 1" LOC, 0.0150" Radius, 4 Flute, Solid Carbide
• Taper Shank Drill Bit: 0.4331″ Dia, 1MT, 130 °, High Speed Steel Bright/Uncoated & Oxide, 9.8425″ Flute Length, 14.7638″ OAL, Cone Relief Point, Parabolic Flute
• Die Drill Bit: 0.3346″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• 1.28″ Max Depth, 0.236 to 2.559″ Width, External Right Hand Indexable Grooving/Cutoff Toolholder 5.906″ OAL, Uses SA 35-60\x85 Inserts, HSA Monoblock Toolholder, Series SA Parting / Grooving
• 1.28″ Max Depth, 0.236 to 2.559″ Width, External Left Hand Indexable Grooving/Cutoff Toolholder 5.906″ OAL, 25mm Shank Height, Uses SA 35-60\x85 Inserts, HSA Monoblock Toolholder, Series SA Parting / Grooving
• Buna-N Tube: 1/8″ ID, 1/4″ OD, Standard Roll 100' 25 Max psi, Black
• Woodruff Keyseat Cutter: 3/16" Cut Dia, 3/16" Shank Dia, Straight Tooth
• Corner Radius End Mill: 3/32″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, Clear, 8,000 psi Tensile Strength Rockwell M-95
• Corner Radius End Mill: 3/64″ Dia, 3/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Beam Clamps & C-Clamps; Type: Screwlock Beam Clamp; Maximum Flange Width: 12-1/2; Load Capacity (Lb.): 6000.000; Finish/Coating: Enamel; Minimum Flange Width: 3-3/16; Type: Screwlock Beam Clamp
• Single Profile Thread Mill: #5-40 to #5-44, 40 to 44 TPI, Internal & External, 4 Flutes, Solid Carbide 3/16″ Shank Dia, 2″ OAL, AlTiN Coated
• Hex Head Cap Screw: 1/2-13 x 3-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Corner Radius End Mill: 1/16″ Dia, 1/4″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Hex Head Cap Screw: 1-8 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 8.0000; Outside Diameter: 13.5000; Wall Thickness (mm): 2.75; Material: Silicone; Standard Coil Length (Feet): 10; Maximum Working Pressure (psi): 145; Hardness: 70A; Special Item Information: Polyes
• Taper Length Drill Bit: 0.3740″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Corner Radius End Mill: 5/64″ Dia, 5/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Black Tee: 1-1/2 x 1-1/4 x 1-1/4″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Bar Puller Parts & Accessories; Accessory Type: Gripper; Accessory Type: Gripper; Jaw Type: Self Activating/Slotted Jaw Set; Compatible Bar Puller: Bar Puller Kits; Compatible Bar Puller: Bar Puller Kits; Gripper Size: 2.625 in; Adapter Size: 1; Shank Dia
• Sheet: EPDM Rubber, 12″ Wide, 18″ Long, Black Durometer 60, Plain Backing
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Bar Puller Parts & Accessories; Accessory Type: Gripper; Accessory Type: Gripper; Jaw Type: Self Activating/Slotted Jaw Set; Compatible Bar Puller: Bar Puller Kits; Compatible Bar Puller: Bar Puller Kits; Gripper Size: 2.5 in; Adapter Size: 1; Shank Diame
• Corner Radius End Mill: 3/32″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Sheet: Buna-N Rubber, 24″ Wide, 36″ Long, White Durometer 60, Plain Backing
• Indexable Ball Nose End Mills; Cutting Diameter (Decimal Inch): 3/4; Maximum Depth of Cut (Decimal Inch): 0.7188; Maximum Depth of Cut (Inch): 23/32; Shank Type: Straight Shank; Shank Diameter (Inch): 3/4; Toolholder Style: i-Xmill; Number of Ball Nose In
• Corner Radius End Mill: 1/16″ Dia, 1/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Ball Grip Quick-Release Pin: T-Handle, 7/16″ Pin Dia, 3/4″ Usable Length 2.09″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Indexable Ball Nose End Mills; Cutting Diameter (Decimal Inch): 1; Maximum Depth of Cut (Decimal Inch): 0.9063; Maximum Depth of Cut (Inch): 29/32; Shank Type: Straight Shank; Shank Diameter (Inch): 1; Toolholder Style: i-Xmill; Number of Ball Nose Insert
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8521; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• M5x0.8, 34.53mm OAL, 10mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 25mm Body Length, 9.53mm Thread Length, 12.7mm Thread Depth, Grade 303, Uncoated
• Ball End Mill: 0.016″ Dia, 0.048″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• #6 Screw 1-3/4″ OAL 0.14″ ID x 5/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.60; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: ICP; Coating Process: PVD; Insert Seat Size: 4.5; Functional Length (mm): 2.87; Pri
• Soap, Lotion & Hand Sanitizer Dispensers; Operation Mode: Pump; For Use With: Vinyl Bottle; Container Type: Bottle with Pump; Applications: For Heavy Usage & Hygienic Applications; Overall Length (Inch): 37998
• Straight Blade Plug: Industrial, 6-50P, 250VAC, Black Angled, Self-Grounded, 50A, Composite Body, 2 Poles, 3 Wires
• Thread Forming Tap: #2-64, DIN 2184-1, 2BX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Single Profile Thread Mill: 2-56 to 2-64, 56 to 64 TPI, Internal & External, 2 Flutes, Solid Carbide 0.064″ Cut Dia, 1″ Shank Dia, 1.5″ OAL, Bright/Uncoated
• Plastic Bar: Garolite, 1-1/2″ Thick, Yellow
• Coolant Adapters & Collars For Indexables; Type: Coolant Cap; Indexable Tool Type: Milling; Toolholder Style Compatibility: R220.90-26; R220.54/56; R220.69-XO16; R220.64-ZO16; Outside Diameter: 160.00 mm; 6.0000 in; Series: SC-160; Toolholder Style Compat
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1-1/4″ Thick, White
• Stainless Steel Pipe Flanges; Style: IPS Slip-On; Pipe Size: 2-1/2; Outside Diameter (Inch): 7; Material Grade: 304/304L; Distance Across Bolt Hole Centers: 3/4; Number of Bolt Holes: 4; Bolt Hole Diameter: 5-1/2; Pressure Rating (psi): 150; Minimum Order
• Sheet: Silicone Rubber, 18″ Wide, 18″ Long, Red Durometer 50, Plain Backing
• Rotary Broach Holders; Type: Yes; Adjustable: Yes; Shank Diameter (mm): 0.75; Holder Shank Diameter: 0.75; For Broach Shank (mm): 0.50; Holder Shank Length: 2; Broach Shank Length: 1.75; For Broach Shank Diameter: 0.50
• Combo Drill & Countersink: Metric, High Speed Steel TiN Finish, Right Hand Cut, Series 613
• 320 Grit Aluminum Oxide Rectangular Polishing Stone Extra Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick, Oil Filled
• Sheet: Silicone Rubber, 18″ Wide, 36″ Long, Red Durometer 60, Plain Backing
• Electrical Enclosure Panels; Panel Type: Back; For Box Size (H x W): 18.2 x 18.2; Finish: Powder Coated; For Use With: Ultimate Series 20x20; Finish/Coating: Powder Coated
• 400 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick, Oil Filled
• All-Purpose Cleaner: 5 gal Pail Liquid, Low Odor Scent
• O-Ring: 1.36″ ID x 1.94″ OD, 1/4″ Thick, FEP-Encapsulated Silicone Round Cross Section
• Extra Length Drill Bit: 0.3898″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Glass Cloth Tape; Width (Inch): 1; Material Type: PTFE; Color: Black; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 5.0000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• Extra Length Drill Bit: 0.3937″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Electromagnet Lock Accessories; Type: Single Opening Offline Controller; For Use With: Access Control Systems; Material: Plastic; Material: Plastic; For Use With: Access Control Systems; Type: Single Opening Offline Controller; Accessory Type: Single Open
• White Double-Sided Foam Tape: 1/2″ Wide, 5 yd Long, 25 mil Thick, Acrylic Adhesive
• All-Purpose Cleaner: 1 gal Pump Spray Bottle Liquid, Pleasant Scent
• Torque Wrenches; Wrench Type: Torque; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 25.00; Maximum Torque (Ft/Lb): 110.00; Overall Length (Decimal Inch): 17.8000; Head Type: Reversible Ratcheting; Fixed; Head S
• Spill Kits; Kit Type: Universal; Container Type: Bag; Container Size (Gal.): 9.00; Container Material: Polyethylene; Portable: Yes; Includes: (20) 15 in x 19 in Universal Pads; (2) Disposal Bags; Pair of Goggles; Pair of Nitrile Gloves; (3) 3 in x 4 ft Un
• Press Fit Headless Drill Bushing: P, 1-1/64″ ID, 1-3/4″ OD 2-1/8″ OAL, Carbon Steel
• Men's Size 6-8, Women's Size 8-10, Rain Overshoe 6″ High, Steel Toe, Cleated Sole, PVC Upper, Black & Yellow
• Men's Size 12-13.5, Women's Size 14, Rain Overshoe 6″ High, Steel Toe, Cleated Sole, PVC Upper, Black & Yellow
• Press Fit Headed Drill Bushing: Type H, 3/4″ ID, 1-3/8″ OD
• Men's Size 8-10, Women's Size 10-11, Rain Overshoe 6″ High, Steel Toe, Cleated Sole, PVC Upper, Black & Yellow
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.2500; Drill Bit Size (Inch): 0.2500; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal I
• Corner Radius End Mill: 0.1969″ Dia, 0.6299″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Hex Head Cap Screw: 7/8-9 x 6-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• All-Purpose Cleaner: 1 gal Bottle Liquid Concentrate, Mild Scent
• Cleaner Degreaser: 5 gal, Pail 2.5 VOC Compliant
• All-Purpose Cleaner: 5 gal Pail Liquid Concentrate, Mild Scent
• Taper Length Drill Bit: 0.3580″ Dia, 130 ° Bright/Uncoated, 4.5276″ Flute Length, 6.8898″ OAL, RH Cut, Parabolic Flute, Straight Shank, Series 501
• 50' x 4' Polyethylene Privacy Screen with Shade Cloth Nickle-Plated Grommets, Fasten with Zip Ties
• Hex Head Cap Screw: 3/4-10 x 5-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 1.4960 in; Maximum Drill Size: 1.8110 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Pamphlet & Literature Displays; Type: Literature Holder; Product Type: Literature Holder; Number of Compartments: 3; Overall Width: 11-1/4; Overall Depth: 6.938 in; 6.938; Overall Depth: 6.938 in; Overall Height (Inch): 13-5/16; Color: Silver; Color: Silv
• Taper Length Drill Bit: 0.3307″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Welded Bandsaw Blade: 16' 1″ Long, 1″ Wide, 0.035″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Profiling Insert: N123L2 S205, Solid Carbide 0.1575″ Corner Radius, Series CoroCut 1-2
• Torque Wrenches; Wrench Type: Torque; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 36.00; Maximum Torque (Ft/Lb): 36.00; Overall Length (Decimal Inch): 13.9000; Head Type: Reversible Ratcheting; Fixed; Head Sh
• Black Hex Bushing: 3 x 2″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Extension Tap: M4 x 0.7, 3 Flutes, TiCN Finish, Cobalt, Long Reach 2-3 P, 13″ Thread Length, 6H Class of Fit
• Hard Hat: Construction, High Visibility & Impact Resistant, Front Brim, Type 1, Class C, 4-Point Suspension White, Nylon
• Hard Hat: Construction, High Visibility & Impact Resistant, Front Brim, Type 1, Class C, 4-Point Suspension Blue, HDPE
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Electric Strikes; Electro Magnetic Locks; Material: Steel; Material: Steel; For Use With: Electric Strikes; Electro Magnetic Locks; Type: Power Supply; Accessory Type: Power Supply; Type: P
• Dovetail Cutters; 5/16X5/16X1/4X2-1/2 CARB ALTIN DOVETAIL CUTR
• Welded Bandsaw Blade: 16' 5″ Long, 1″ Wide, 0.035″ Thick, 1.3 TPI Carbon Steel, Toothed Edge
• Boring Insert: TWBR02003 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.0039″ Corner Radius, 5 ° Relief
• Grooving Insert: TWFGT080 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 0.8 mm Cutting Width, 1.5 mm Max Depth, Series Twin Bar
• Boring Insert: TWBTR03003 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.002″ Corner Radius, 5 ° Relief
• Boring Insert: TWBTR03003 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.0039″ Corner Radius, 5 ° Relief
• Boring Insert: TWBTR02503 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.002″ Corner Radius, 5 ° Relief
• Boring Insert: TWBTR02503 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.0039″ Corner Radius, 5 ° Relief
• Boring Insert: TWBR02503 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.002″ Corner Radius, 5 ° Relief
• Boring Insert: TWBTR02003 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.002″ Corner Radius, 5 ° Relief
• Boring Insert: TWBR03003 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.002″ Corner Radius, 5 ° Relief
• Boring Insert: TWBR03003 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.0039″ Corner Radius, 5 ° Relief
• Ball End Mill: 0.03″ Dia, 0.09″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.03″ Dia, 0.045″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Boring Insert: TWBR02003 PR1535, Solid Carbide Megacoat Nano Finish, 10 °, 0.002″ Corner Radius, 5 ° Relief
• Grooving Insert: TWFGT150 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 0.0591″ Cutting Width, 2.2″ Max Depth, Series Twin Bar
• Ball End Mill: 0.031″ Dia, 0.046″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: TWFG125 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 0.0492″ Cutting Width, 2.2″ Max Depth, Series Twin Bar
• Corner Radius End Mill: 0.1406″ Dia, 0.22″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: TWFGT050 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 0.0197″ Cutting Width, 1″ Max Depth, Series Twin Bar
• Corner Radius End Mill: 0.1406″ Dia, 0.425″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: TWFG100 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 0.0394″ Cutting Width, 2.2″ Max Depth, Series Twin Bar
• Spiral Flute Tap: M6 x 1.00, Metric Coarse, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal, Bright/Uncoated 0.46″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, D3, Series 716
• Corner Radius End Mill: 0.1406″ Dia, 0.22″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Hex Head Cap Screw: 1/2-13 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• O-Ring: 1.6″ ID x 1.56″ OD, 1/4″ Thick, Ethylene Propylene Diene Monomer Round Cross Section
• Pipe Cross: 2″ Fitting, 304 Stainless Steel FNPT x FNPT x FNPT x FNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1″ Thick, Blue Shore D-70
• 1/2″ Head Diam, 1/2″ Shank Diam, 4 Flute 110° High Speed Steel Countersink Bright Finish, 3″ OAL, Double End, Straight Shank, Right Hand Cut
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 3/4″ Wide x 6″ Long x 1/8″ Thick
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 15.00; Maximum Torque (Ft/Lb): 75.00; Overall Length (Decimal Inch): 15.2000; Head Type: Interchageable; Head Shape: Rec
• Twist Lock Receptacles; Receptacle/Part Type: Receptacle; Gender: Female; NEMA Configuration: L19-30R; Flange Style: No Flange; Amperage: 30 A; Number Of Poles: 4; Number Of Wires: 4; Maximum Cord Diameter: 29.20 mm; Resistance Features: Impact-Resistant;
• #11, 118° Drill Point, 4.85mm Shank Diam, Fast Spiral Circuit Board Drill Bit 3/4″ Flute Length, 1-1/2″ OAL, Series 300
• Compression Spring: 1.998″ OD, 3.5″ Free Length 0.177″ Wire Dia, 72.19 lb Max Load, 43.415 lb/in Spring Rate, Stainless Steel
• Sheet: Neoprene Rubber, 24″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Compression Spring: 1.998″ OD, 5.25″ Free Length 255.902 lb Max Load, 118.715 lb/in Spring Rate, Music Wire
• Sheet: Silicone Rubber, 6″ Wide, 12″ Long, Red Durometer 40, Plain Backing
• Kyocera ABW 23R5015 KW10 Grade Uncoated Carbide, 15 Degree, Irregular, Positive Rake Angle, Right-Hand Turning Insert for Light Interruption and Finishing in (N) Non-Ferrous Metals, (S) Titanium Alloy and (K) Gray Cast Iron
• Grooving Tool: LH Cut, Face Solid Carbide
• Turning Insert: KNUX 16 04 05L11 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Left Hand, 0.0197″ Corner Radius, N/A Series KNUX
• Black Tee: 1-1/4 x 1-1/4 x 2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Turning Insert: KNUX 16 04 10L11 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Left Hand, 0.0394″ Corner Radius, N/A Series KNUX
• Turning Insert: KNUX 16 04 05L12 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Left Hand, 0.0197″ Corner Radius, N/A Series KNUX
• Turning Insert: KNUX 16 04 05R12 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Right Hand, 0.0197″ Corner Radius, N/A Series KNUX
• Turning Insert: KNUX 16 04 10R11 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Right Hand, 0.0394″ Corner Radius, N/A Series KNUX
• Turning Insert: KNUX 16 04 10L12 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Left Hand, 0.0394″ Corner Radius, N/A Series KNUX
• Turning Insert: KNUX 16 04 10R12 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Right Hand, 0.0394″ Corner Radius, N/A Series KNUX
• Turning Insert: KNUX 16 04 05R11 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Right Hand, 0.0197″ Corner Radius, N/A Series KNUX
• Turning Insert: KNUX 16 04 05L11 4415, TiCN, Al2O3 & TiN Finish, Left Hand, 0.0197″ Corner Radius, N/A Series KNUX
• Turning Insert: KNUX 16 04 05R11 4415, TiCN, Al2O3 & TiN Finish, Right Hand, 0.0197″ Corner Radius, N/A Series KNUX
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1875; Drill Bit Size (Inch): 0.1875; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal I
• Turning Insert: KNUX 16 04 10L11 4415, TiCN, Al2O3 & TiN Finish, Left Hand, 0.0394″ Corner Radius, N/A Series KNUX
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1910; Drill Bit Size (Wire): #11; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal Inch
• Turning Insert: KNUX 16 04 05L12 4415, TiCN, Al2O3 & TiN Finish, Left Hand, 0.0197″ Corner Radius, N/A Series KNUX
• Closed Cell Silicone Foam: 12″ Wide, 24″ Long, Black Plain Backing
• Turning Insert: KNUX 16 04 10L12 4415, TiCN, Al2O3 & TiN Finish, Left Hand, 0.0394″ Corner Radius, N/A Series KNUX
• Hex Head Cap Screw: 7/8-9 x 2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Turning Insert: KNUX 16 04 10R11 4415, TiCN, Al2O3 & TiN Finish, Right Hand, 0.0394″ Corner Radius, N/A Series KNUX
• Turning Insert: KNUX 16 04 10R12 4415, TiCN, Al2O3 & TiN Finish, Right Hand, 0.0394″ Corner Radius, N/A Series KNUX
• Cleaner Degreaser: 1 gal, Bottle
• Turning Insert: KNUX 16 04 05R12 4415, TiCN, Al2O3 & TiN Finish, Right Hand, 0.0197″ Corner Radius, N/A Series KNUX
• Compression Spring: 1.528″ OD, 9″ Free Length 0.135″ Wire Dia, 45.339 lb Max Load, 9.532 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 1" Dia, 1-1/2" LOC, 4 Flute, Solid Carbide
• Compression Spring: 1.586″ OD, 7″ Free Length 0.148″ Wire Dia, 55.936 lb Max Load, 16.183 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 7″ Free Length 0.135″ Wire Dia, 47.072 lb Max Load, 12.949 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 5.5″ Free Length 325.946 lb Max Load, 211.2 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 5.5″ Free Length 0.148″ Wire Dia, 57.949 lb Max Load, 21.669 lb/in Spring Rate, Stainless Steel
• Ball Grip Quick-Release Pin: Button Handle, 3/4″ Pin Dia, 2-1/2″ Usable Length 4.18″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Compression Spring: 2.526″ OD, 7″ Free Length 205.519 lb Max Load, 57.737 lb/in Spring Rate, Music Wire
• Ball Grip Quick-Release Pin: Button Handle, 3/4″ Pin Dia, 3″ Usable Length 4.68″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Compression Spring: 1.88″ OD, 5.25″ Free Length 270.619 lb Max Load, 135.268 lb/in Spring Rate, Music Wire
• Milling Insert: OAKU 060508SR-F50 CTPM240, CTPM240, Solid Carbide N/A Finish, 1.0000″ OAW
• Milling Insert: OAKU 060508SR-M50 CTPM225, CTPM225, Solid Carbide N/A Finish, 1.0000″ OAW
• Compression Spring: 2.644″ OD, 5.25″ Free Length 196.818 lb Max Load, 70.287 lb/in Spring Rate, Music Wire
• Hex Head Cap Screw: 1-1/2 6 x 6-1/2″, Grade 316 Stainless Steel, Uncoated - Partially Threaded
• Compression Spring: 0.823″ OD, 4″ Free Length 0.162″ Wire Dia, 128.13 lb Max Load, 179.399 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.41″ OD, 9.5″ Free Length 0.192″ Wire Dia, 170.609 lb Max Load, 44.788 lb/in Spring Rate, Music Wire
• Compression Spring: 2.468″ OD, 7″ Free Length 210.08 lb Max Load, 60.129 lb/in Spring Rate, Music Wire
• Hex Head Cap Screw: 3/4-10 x 7″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Extra Length Drill Bit: 0.1299″ Dia, 130 °, High Speed Steel Uncoated, Parabolic Flute, Straight-Cylindrical Shank, Series 504
• Extra Length Drill Bit: 0.1339″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 504
• Replaceable Drill Tip: KTFST02500DAV, 128 &deg N/A Seat Size B, Uncoated Finish, Through Coolant
• Compression Spring: 2.409″ OD, 7″ Free Length 0.225″ Wire Dia, 160.409 lb Max Load, 40.96 lb/in Spring Rate, Music Wire
• Replaceable Drill Tip: KTFST03125DAV, 128 &deg N/A Seat Size E, Uncoated Finish, Through Coolant
• Compression Spring: 2.526″ OD, 5.25″ Free Length 205.519 lb Max Load, 75.969 lb/in Spring Rate, Music Wire
• Hex Head Cap Screw: 1/2-20 x 1″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Compression Spring: 1.821″ OD, 5.25″ Free Length 278.606 lb Max Load, 145.227 lb/in Spring Rate, Music Wire
• Compression Spring: 2.056″ OD, 6.75″ Free Length 0.225″ Wire Dia, 186.287 lb Max Load, 56.222 lb/in Spring Rate, Music Wire
• Compression Spring: 0.588″ OD, 8.5″ Free Length 0.112″ Wire Dia, 65.988 lb Max Load, 35.262 lb/in Spring Rate, Stainless Steel
• Grooving Insert: DX18GD3 WSM33S, Solid Carbide Al Finish, Neutral, 0.079″ Cutting Width, Series DX-E-GD3
• Grooving Insert: DX18GD6 WSM23S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series DX-E-GD6
• Grooving Insert: DX18GD6 WSM33S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series DX-E-GD6
• Grooving Insert: DX18GD6 WSM33S, Solid Carbide Al Finish, Neutral, 0.098″ Cutting Width, Series DX-E-GD6
• Grooving Insert: DX18GD6 WSM23S, Solid Carbide Al Finish, Neutral, 0.098″ Cutting Width, Series DX-E-GD6
• Grooving Insert: DX18GD6 WSM23S, Solid Carbide Al Finish, Neutral, 0.079″ Cutting Width, Series DX-E-GD6
• Grooving Insert: DX18GD6 WSM33S, Solid Carbide Al Finish, Neutral, 0.079″ Cutting Width, Series DX-E-GD6
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Right Hand, 0.118″ Cutting Width, Series DX-E-R-CF6
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Right Hand, 0.098″ Cutting Width, Series DX-E-R-CF6
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Left Hand, 0.098″ Cutting Width, Series DX-E-L-CF6
• Grooving Insert: DX18CF6 WSM43S, Solid Carbide Al Finish, Right Hand, 0.079″ Cutting Width, Series DX-E-R-CF6
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Right Hand, 0.079″ Cutting Width, Series DX-E-R-CF6
• Grooving Insert: DX18CF6 WSM43S, Solid Carbide Al Finish, Left Hand, 0.079″ Cutting Width, Series DX-E-L-CF6
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Left Hand, 0.079″ Cutting Width, Series DX-E-L-CF6
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series DX-E-CF6
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Left Hand, 0.118″ Cutting Width, Series DX-E-L-CF6
• Grooving Insert: DX18CF6 WSM43S, Solid Carbide Al Finish, Neutral, 0.098″ Cutting Width, Series DX-E-CF6
• Grooving Insert: DX18CF5 WSM43S, Solid Carbide Al Finish, Right Hand, 0.079″ Cutting Width, Series DX-E-R-CF5
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Right Hand, 0.118″ Cutting Width, Series DX-E-R-CF5
• Grooving Insert: DX18CE4 WSM43S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series DX-E-CF5
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Left Hand, 0.118″ Cutting Width, Series DX-E-L-CF5
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Right Hand, 0.079″ Cutting Width, Series DX-E-R-CF5
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Right Hand, 0.098″ Cutting Width, Series DX-E-R-CF5
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Left Hand, 0.098″ Cutting Width, Series DX-E-L-CF5
• Grooving Insert: DX18CE4 WSM43S, Solid Carbide Al Finish, Right Hand, 0.118″ Cutting Width, Series DX-E-R-CE4
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Right Hand, 0.118″ Cutting Width, Series DX-E-R-CE4
• Grooving Insert: DX18CE4 WKP23S, Solid Carbide Al2O3 & TiCN Finish, Neutral, 0.118″ Cutting Width, Series DX-E-CE4
• Grooving Insert: DX18CE4 WSM43S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series DX-E-CE4
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Left Hand, 0.118″ Cutting Width, Series DX-E-L-CE4
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Right Hand, 0.098″ Cutting Width, Series DX-E-R-CE4
• Grooving Insert: DX18CE4 WSM43S, Solid Carbide Al Finish, Left Hand, 0.118″ Cutting Width, Series DX-E-L-CE4
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Left Hand, 0.098″ Cutting Width, Series DX-E-L-CE4
• Grooving Insert: DX18CE4 WSM43S, Solid Carbide Al Finish, Right Hand, 0.079″ Cutting Width, Series DX-E-R-CE4
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Right Hand, 0.079″ Cutting Width, Series DX-E-R-CE4
• Grooving Insert: DX18CE4 WSM43S, Solid Carbide Al Finish, Left Hand, 0.079″ Cutting Width, Series DX-E-L-CE4
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Left Hand, 0.079″ Cutting Width, Series DX-E-L-CE4
• Grooving Insert: DX18CE4 WSM23S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series DX-E-CE4
• Grooving Insert: DX18CE4 WKP23S, Solid Carbide Al2O3 & TiCN Finish, Neutral, 0.079″ Cutting Width, Series DX-E-CE4
• Grooving Insert: DX18CE4 WSM23S, Solid Carbide Al Finish, Neutral, 0.079″ Cutting Width, Series DX-E-CE4
• Die Drill Bit: 0.6496″ Dia, 135 °, Solid Carbide Coated, Series 200
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 83; Material: Galvanized Steel Feet; Plastic Board; Polymer Plastic Upright; Barricade Width (Inch): 96; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 16.0000; Top Panel Heig
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Galvanized Steel Feet; Plastic Board; Polymer Plastic Upright; Barricade Width (Inch): 96; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 16.0000; Top Panel Heig
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 45' Long x 25' Wide, 12 mil Polyethylene, Rectangle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0074; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• All-Purpose Cleaner: 22 gal Bottle Liquid, Lemon Scent
• Traffic Barricades; Type: A-Frame; Barricade Height (Inch): 42; Material: Plastic; Barricade Width (Inch): 28; Reflective: Yes; Compliance: None; Color: White; Weight (Lb.): 5.0000; Top Panel Height (Inch): 8; Top Panel Width (Inch): 72; Additional Inform
• Drum Unit: Black Use with Xerox Workcentre 7525, 7530, 7535, 7545, 7556, 7830, 7835, 7845, 7855, 7,970 & 7970I
• Static Phase converter. Single phase to 3 phase. Horse power range 3/4HP to 1 1/2HP HEAVY DUTY Static three phase converter
• Sheet: Buna-N Rubber, 36″ Wide, 60″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Indexable Ball Nose End Mills; Cutting Diameter (mm): 32; Maximum Depth of Cut (Decimal Inch): 1.1024; Maximum Depth of Cut (mm): 28.00; Shank Type: Straight Shank; Shank Diameter (mm): 32.0000; Toolholder Style: i-Xmill; Number of Ball Nose Inserts Used
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Cylindrical Shank Uses 2 SDXS Inserts, 0.078″ Max Depth, 8″ OAL, Through Coolant
• Indexable Ball Nose End Mills; Cutting Diameter (Decimal Inch): 1-1/4; Maximum Depth of Cut (Decimal Inch): 1.1250; Maximum Depth of Cut (Inch): 1-1/8; Shank Type: Straight Shank; Shank Diameter (Inch): 1-1/4; Toolholder Style: i-Xmill; Number of Ball Nos
• Indexable Ball Nose End Mills; Cutting Diameter (mm): 30; Maximum Depth of Cut (Decimal Inch): 1.0630; Maximum Depth of Cut (mm): 27.00; Shank Type: Straight Shank; Shank Diameter (mm): 32.0000; Toolholder Style: i-Xmill; Number of Ball Nose Inserts Used
• Wedges For Indexables; Indexable Tool Type: Cut-Off; Tool Material: Steel; Hole Diameter: 6.0000; Complete Toolholder Compatibility: 150.10-VDI; Series: 150.10; Toolholder Style Compatibility: 150.10-VDI
• Indexable Ball Nose End Mills; Cutting Diameter (Decimal Inch): 1-1/4; Maximum Depth of Cut (Decimal Inch): 1.1250; Maximum Depth of Cut (Inch): 1-1/8; Shank Type: Straight Shank; Shank Diameter (Inch): 1-1/4; Toolholder Style: i-Xmill; Number of Ball Nos
• Broaching Oil Fluid: 5 gal Pail Liquid, Use on Broaching tools, Amber
• Indexable Ball Nose End Mills; Cutting Diameter (mm): 30; Maximum Depth of Cut (Decimal Inch): 1.0630; Maximum Depth of Cut (mm): 27.00; Shank Type: Straight Shank; Shank Diameter (mm): 32.0000; Toolholder Style: i-Xmill; Number of Ball Nose Inserts Used
• Boring Bar Sleeves; Bore Diameter (Decimal Inch): 50.0000; Shank Type: Straight Shank; Bore Depth: 156.0000; Overall Length: 156.00; Shank Diameter (Decimal Inch): 60.0000; Shank Height: 58.50 mm; Overall Length (Decimal Inch): 156.00; Head Diameter: 70.0
• Indexable Ball Nose End Mills; Cutting Diameter (mm): 32; Maximum Depth of Cut (Decimal Inch): 1.1024; Maximum Depth of Cut (mm): 28.00; Shank Type: Straight Shank; Shank Diameter (mm): 32.0000; Toolholder Style: i-Xmill; Number of Ball Nose Inserts Used
• Boring Bar Sleeves; Bore Diameter (Decimal Inch): 40.0000; Shank Type: Straight Shank; Bore Depth: 156.0000; Overall Length: 156.00; Shank Diameter (Decimal Inch): 60.0000; Shank Height: 58.50 mm; Overall Length (Decimal Inch): 156.00; Head Diameter: 70.0
• Boring Bar Sleeves; Bore Diameter (Decimal Inch): 32.0000; Shank Type: Straight Shank; Bore Depth: 156.0000; Overall Length: 156.00; Shank Diameter (Decimal Inch): 60.0000; Shank Height: 58.50 mm; Overall Length (Decimal Inch): 156.00; Head Diameter: 70.0
• Boring Bar Sleeves; Bore Diameter (Decimal Inch): 1.2500; Shank Type: Straight Shank; Bore Depth: 6.1420; Overall Length: 6.14; Shank Diameter (Decimal Inch): 2.5000; Shank Height: 2.4410 in; Overall Length (Decimal Inch): 6.14; Head Diameter: 2.7560; Bod
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.1574 in; Shank Type: Modular; Toolholder Style: 15B8E; Shank Diameter (Inch): 0.8200; Shank Diameter (mm): 0.8200; Maximum Ramping Angle: 6 ™; Compatible Insert Style: RJET; Compatible Insert Size Code: 0
• Boring Bar Sleeves; Bore Diameter (Decimal Inch): 1.5000; Shank Type: Straight Shank; Bore Depth: 6.1420; Overall Length: 6.14; Shank Diameter (Decimal Inch): 2.5000; Shank Height: 2.4410 in; Overall Length (Decimal Inch): 6.14; Head Diameter: 2.7560; Bod
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.1574 in; Shank Type: Cylindrical; Toolholder Style: 15B8E; Shank Diameter (Inch): 1.0000; Shank Diameter (mm): 1.0000; Maximum Ramping Angle: 6 ™; Compatible Insert Style: RJET; Compatible Insert Size Cod
• Boring Bar Sleeves; Bore Diameter (Decimal Inch): 2.0000; Shank Type: Straight Shank; Bore Depth: 6.1420; Overall Length: 6.14; Shank Diameter (Decimal Inch): 2.5000; Shank Height: 2.4410 in; Overall Length (Decimal Inch): 6.14; Head Diameter: 2.7560; Bod
• Collet Set: 14 Pc, Series DA300, 1/4″ Capacity Increments of 1/64″
• Hydraulic Tool Chuck: Taper Shank, 20 mm Hole 72.5 mm Projection, 39.25 mm Nose Dia, Through Coolant
• Hydraulic Tool Chuck: Taper Shank 39.25 mm Nose Dia, Through Coolant
• Indexable Grooving Toolholder: G4014.10R-2T17DX18-P, Internal or External Right Hand, 0.0790″ Max Groove Width 0.6890″ Max Depth, Uses DX Inserts, 0.6250″ Shank Height, No
• Traffic Barricades; Type: A-Frame; Barricade Height (Inch): 40; Material: Plastic; Barricade Width (Inch): 29; Reflective: Yes; Compliance: None; Color: White; Weight (Lb.): 6.0000; Top Panel Height (Inch): 8; Top Panel Width (Inch): 72; Additional Inform
• Pedestrian Barrier Kits; Type: A-Frame Barricade Set; Post/Base Material: Plastic; Rope/Chain Material: Polyethylene; Post/Base Color: White; Height (Inch): 42.0; Contents: (2) 28 in W x 42 in H Two White Plastic A-Frame Legs; (2) 6 ft L x 7.75 in H x 1.7
• Hex Head Cap Screw: 2 4-1/2 x 16″, Grade 8 Steel, Uncoated - Partially Threaded, ASME B18.2.1