Products

• Micro Drill Bit: 0.0886″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 1.9685″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Abrasive Belt: 9" Wide, 138-1/2" OAL, 120 Grit, Aluminum Oxide
• Bleach; Form: Solid; Container Type: Packet; Container Size (oz.): 8.90; Harshness: Moderate; Scent: Regular
• Square End Mill: 3/16'' Dia, 3/8'' LOC, 3/16'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide AlCrN Finish, 37 ° Variable Helix, Centercutting, Series XPV
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 0.7518 in; Inside Diameter (mm): 13 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compa
• Replaceable Drill Tips; Maximum Drill Diameter (Decimal Inch): 0.3750; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC08; Cutting Direction: Right Hand; Series: ICN; Coating Process: Uncoated; Insert Seat Size: 9; Functional Length (
• Electrical Enclosure Accessories; For Use With: Enclosures; Includes: Mounting Hardware and Instructions; Standards Met: UL Recognized
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 0.7518 in; Inside Diameter (mm): 13 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compati
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 1.4960 in; Maximum Drill Size: 1.8110 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 19.04 mm; Inside Diameter (mm): 13 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibili
• Wet & Dry Cut Saw Blade: 12″ Dia, 1″ Arbor Hole, 0.11″ Kerf Width, 17 Teeth High Speed Steel Teeth, Use on Concrete, Standard Arbor
• Cut & Abrasion-Resistant Gloves: Size XL, ANSI Cut A9, Polyvinylchloride, Composite of Cut-Resistant Fibers Blue & Yellow, Palm Coated, Polyvinylchloride Grip, ANSI Abrasion 3
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Plastic Sheet: Acetal, 1/4″ Thick, Black Rockwell M-90
• Ball Grip Quick-Release Pin: L-Handle, 25 mm Pin Dia, 100 mm Usable Length 155.1 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Plastic Sheet: Acetal, 1/2″ Thick, White Rockwell M-90
• Single Profile Thread Mill: 1/4-20 to 1/4-32, 20 to 32 TPI, Internal & External, 5 Flutes, Solid Carbide 0.18″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, AlTiN Nano Coated
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1990; Drill Bit Size (Wire): #8; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal Inch)
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1960; Drill Bit Size (Wire): #9; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal Inch)
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Hydraulic Pump Hose; Inside Diameter (Inch): 0.25; Hose Length (Feet): 6.00; Hose Material: Rubber Coated, Steel Wire Braid; Pressure Rating: 10000; End One: 3/8 NPT; Opposite Hose End: C-604; Color: Yellow
• Masking Tape: 60 yd Long, 7.6 mil Thick, Tan Crepe Paper, Rubber Adhesive, 28 lb/in Tensile Strength
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Taper Length Drill Bit: 0.4531″ Dia, 118 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 317
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Taper Length Drill Bit: 0.5156″ Dia, 118 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 317
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Boring Insert: R105105 TN35, Solid Carbide TiN Finish
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Toilet Bowl Brushes & Accessories; Type: Toilet Bowl Mop; Bristle Material: Fiber; Overall Length (Inch): 12; Handle Material: Plastic; Color: White; Handle Style: Straight; Handle Length (Inch): 10; Diameter (Inch): 2
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Masking Tape: 180 yd Long, 7.2 mil Thick, Tan Crepe Paper, Natural Rubber Adhesive, 28 lb/in Tensile Strength
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• MIG Welder Wire Liner: 0.035 to 0.0625″ Wire Dia, 15' Long
• Grooving Tool: LH Cut Solid Carbide
• Vinyl, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Hex Head Cap Screw: 1-1/8 7 x 3″, Grade L9 Steel, Zinc Yellow Dichromate Finish - Fully Threaded
• Open End Wrench: Single End Head, 38 mm 15 ° Head Angle, Vanadium Steel, Manganese Phosphate Finish
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Ice Cleat: Stud Traction, Pull-On Attachment, Size 13.5 to 17.5 Rubber, Ice, Women
• Grooving Tool: RH Cut Solid Carbide
• Taper Shank Drill Bit: 0.5807″ Dia, 2MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 4.4882″ Flute Length, 8.3465″ OAL, Cone Relief Point, Spiral Flute
• Grooving Tool: LH Cut Solid Carbide
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Corner Radius End Mill: 5/16″ Dia, 7/16″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Taper Shank Drill Bit: 0.5827″ Dia, 2MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 4.4882″ Flute Length, 8.3465″ OAL, N Point, Spiral Flute
• Grooving Tool: RH Cut Solid Carbide
• Thread Forming Tap: DIN 2174, 6GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Abrasive Belt: 9" Wide, 138-1/2" OAL, 80 Grit, Aluminum Oxide
• Corner Radius End Mill: 5/16″ Dia, 0.813″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 45 ° Helix, Bright/Uncoated, Corner Radius End
• Taper Shank Drill Bit: 0.5945″ Dia, 2MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 4.7244″ Flute Length, 8.5827″ OAL, Cone Relief Point, Spiral Flute
• Deep Groove Ball Bearing: 80 mm OD 4,114 lb Static Load
• Grooving Tool: LH Cut Solid Carbide
• Thread Forming Tap: DIN 2174, 7GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Plastic Board; Galvanized High Carbon Steel Upright & Feet; Barricade Width (Inch): 72; Reflective: Yes; Compliance: NCHRP-350; MUTCD; Weight (Lb.): 19.0000; Top Panel Height (Inch
• 2.8347″ ID, Grade 1075 High Carbon Steel, Oil Finish, Belleville Disc Spring 5.5118″ OD, 0.3299″ High, 0.1496″ Thick
• Thread Forming Tap: 1/4-20, DIN 2184-1, 2BX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Deep Groove Ball Bearing: 80 mm OD 4,114 lb Static Load
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Plastic Board; Galvanized High Carbon Steel Upright & Feet; Barricade Width (Inch): 72; Reflective: Yes; Compliance: NCHRP-350; MUTCD; Weight (Lb.): 19.0000; Top Panel Height (Inch
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Abrasive Belt: 9" Wide, 108" OAL, 36 Grit, Aluminum Oxide
• Abrasive Belt: 9" Wide, 108" OAL, 60 Grit, Aluminum Oxide
• Deep Groove Ball Bearing: 80 mm OD 3,889 lb Static Load
• #4-40, 3.9369″ OAL, 1/4″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 3-3/4″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 303, Uncoated
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Grooving Tool: RH Cut Solid Carbide
• Speed Bumps, Parking Curbs & Accessories; Type: Car Stop; Length (Inch): 48; Width (Inch): 6; Height (Inch): 4.5; Color: Black; Material: Recycled Rubber
• Tarp/Dust Cover: Black & Green, Rectangle, Polyethylene, 60' Long x 40' Wide, 10 mil Polyethylene, Rectangle
• Cordless Work Light: 12V, 1,200 Lumens 7 hr Run Time
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Silicone Sponge Rubber R10470M Foam: 0.0625″ Thick, 1/2″ Wide, Orange & Tan Adhesive Backing
• Welded Bandsaw Blade: 18' 2″ Long, 1-1/2″ Wide, 0.05″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• Plastic Bar: Acetal, 3/4″ Thick, Black Rockwell M-90
• Silicone Sponge Rubber R10470M Foam: 0.0625″ Thick, 1/2″ Wide, Orange & Tan Adhesive Backing
• Grooving Tool: LH Cut Solid Carbide
• Ties & Structural Hardware; Type: Metal Stud/Metal Track
• Screw Machine Length Drill Bit: 0.1378″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Plastic Bar: Acetal, 3/4″ Thick, White
• Grooving Tool: RH Cut Solid Carbide
• Screwdriver Set: 7 Pc, Philips, Pozidriv & Slotted Includes 1x 162 i PH/S VDE Insulated screwdriver for PlusMinus screws (Phillips/slotted), # 2 x 100 mm, 1x Hook and Loop Fastener Strip 240, 240 x 50 mm
• Paints
• Plastic Bar: Nylon 6/6, 3/4″ Thick, Off-White
• MIG Welding Wire: 0.03″ Dia 12.5 lb
• GFCI Receptacles; Grade: Hospital; Color: Gray; NEMA Configuration: 5-20R; Amperage: 20; Reset Type: Manual; Voltage: 125 VAC; Wiring Method: Side; Back; Body Material: Thermoplastic Nylon; Flange Style: No Flange; Flange Included: No; Amperage: 20 A; Vol
• UV Marker: Black, AP Non-Toxic, Ultra Fine Point 12 Pc
• Shim for Indexables: Drilling Head 10-950 Shim, Negative, Neutral
• Thread Repair Kit: Thread Repair Kit Stainless Steel Insert
• Pry Bars; Prybar Type: Hand Hookeroon; Overall Length Range: 14 to 20.9 in; Overall Length (mm): 380.00; Overall Length (Inch): 14-7/8
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1″ Thick, Black Shore D-70
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/2″ Thick, Black Shore D-70
• 2.6mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Taper Length Drill Bit: 0.2500″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• 2.5mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Black Tee: 1-1/4 x 1 x 1″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• 2.7mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Die Drill Bit: 0.3464″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• 2.58mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Taper Length Drill Bit: 0.2520″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• 2.71mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Shim Stock: 0.625'' Thick, 2'' Long, 2″ Wide, Stainless Steel
• 2.64mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Square End Mill: 3/32'' Dia, 3/8'' LOC, 1/4'' Shank Dia, 2'' OAL, 1 Flute, Solid Carbide Single End, Uncoated, Upcut Flute, 22 ° Helix, Centercutting, RH Cut, RH Flute
• Replaceable Tip Drill: 10.5 to 10.99 mm Drill Dia, 33 mm Max Depth, 16 mm Flange Shank Seat Size 10.5, 97 mm OAL, Through Coolant
• Micro Drill Bit: 0.1043″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 1.9685″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Safety Switches; Type: Foot Switch; Length (Inch): 8; Width (Inch): 6; Color: Yellow; Maximum Load Capacity (psi): 3000; Thickness (Decimal Inch): 0.3750; Number of Lead Wires: 1; Lead Wire Gage (AWG): 18; Cord Length (Feet): 15.00
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Micro Drill Bit: 0.1004″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 1.9685″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Safety Switches; Type: Foot Switch; Length (Inch): 8; Width (Inch): 6; Color: Brown; Maximum Load Capacity (psi): 3000; Thickness (Decimal Inch): 0.3750; Number of Lead Wires: 1; Lead Wire Gage (AWG): 18; Cord Length (Feet): 15.00
• Replaceable Tip Drill: 13.5 to 13.99 mm Drill Dia, 42 mm Max Depth, 16 mm Flange Shank Seat Size 13.5, 110 mm OAL, Through Coolant
• Wrenches For Indexables; Wrench Type: T-Handle Driver; Indexable Tool Type: Toolholder; Drive Type: Slotted; Toolholder Style Compatibility: H4B-H5.0; Double-T; CN8; Hardware Compatibility: Coolant Supply Unit; Overall Length: 0.04; Tool Material: Steel;
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• Replaceable Tip Drill: 14 to 14.49 mm Drill Dia, 43.5 mm Max Depth, 16 mm Flange Shank Seat Size 14, 112 mm OAL, Through Coolant
• Safety Switches; Type: Foot Switch; Length (Inch): 8; Width (Inch): 6; Color: Black; Maximum Load Capacity (psi): 3000; Thickness (Decimal Inch): 0.3750; Number of Lead Wires: 1; Lead Wire Gage (AWG): 18; Cord Length (Feet): 15.00
• Wrenches For Indexables; Wrench Type: T-Handle Driver; Indexable Tool Type: Toolholder; Drive Type: Slotted; Toolholder Style Compatibility: H4B-H5.0; Double-T; CN7; Hardware Compatibility: Coolant Supply Unit; Overall Length: 0.04; Tool Material: Steel;
• Ball End Mill: 0.1″ Dia, 0.3″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• Replaceable Tip Drill: 14.5 to 14.99 mm Drill Dia, 45 mm Max Depth, 16 mm Flange Shank Seat Size 14.5, 114 mm OAL, Through Coolant
• Plastic Sheet: Acetal, 3/8″ Thick, Black Rockwell M-90
• Corner Radius End Mill: 0.1562″ Dia, 3/4″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Replaceable Tip Drill: 12 to 12.49 mm Drill Dia, 37.5 mm Max Depth, 16 mm Flange Shank Seat Size 12, 104 mm OAL, Through Coolant
• Disinfectant Toilet Bowl Cleaner
• Corner Radius End Mill: 1/16″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Replaceable Tip Drill: 12.5 to 12.99 mm Drill Dia, 39 mm Max Depth, 16 mm Flange Shank Seat Size 12.5, 106 mm OAL, Through Coolant
• Toilet Bowl Cleaner with Hydrogen Peroxide
• All-Purpose Cleaner: 32 gal Trigger Spray Bottle, Disinfectant Liquid, Fresh Scent
• Disinfectant Toilet Bowl Cleaner with Lime/Rust Remover
• Corner Radius End Mill: 3/32″ Dia, 0.585″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Plastic Sheet: Nylon 6/12, 1″ Thick, Off-White, 10,000 psi Tensile Strength Rockwell M-85
• Push-to-Connect Tube Fitting: 1/2″ Thread, 1/2″ OD Nickel-Plated Brass, 300 psi
• Closed Cell Neoprene Foam: 12″ Wide, 36″ Long, Black Plain Backing
• Disinfectant Toilet Bowl Cleaner with Bleach
• Square End Mill: 5/64'' Dia, 5/16'' LOC, 1/4'' Shank Dia, 2'' OAL, 1 Flute, Solid Carbide Single End, Uncoated, Upcut Flute, 22 ° Helix, Centercutting, RH Cut, RH Flute
• Paper Towels: Hard Roll, 6 Rolls, Roll, 1 Ply, Brown 12″ Wide, 800' Roll Length
• Strip: Buna-N Rubber, 2″ Wide, 120″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Square End Mill: 0.026'' Dia, 0.039'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.029'' Dia, 0.043'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball Grip Quick-Release Pin: T-Handle, 3/8″ Pin Dia, 5″ Usable Length 6.34″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Square End Mill: 0.027'' Dia, 0.041'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Push-to-Connect Tube Fitting: 1/2″ Thread Stainless Steel, 290 psi
• Hook Up Wire; Wire Size (AWG): 30; Wire Size (sq mm): 30 AWG; Number of Strands: 1; Jacket Color: Green; Overall Length: 100 ft; Maximum Operating Temperature: 302.00 ™F; Jacket Material: Tefzel; Standards Met: UL 1516; Overall Length (Feet): 100 ft; Max
• Tapered End Mill: 5 ° per Side, 1/16″ Small Dia, 5/16″ LOC, 3 Flutes, Solid Carbide, Square End 1/8″ Shank Dia, 1-1/2″ OAL, Uncoated, Series Miniature End Mills - Tapered - Square
• Modular Fixturing Shanks; System Compatibility: SpeedLoc; Shank Diameter (mm): 13 mm; Plate Thickness Compatibility (Decimal Inch): 0.5000; Finish: Black; Head Diameter (Decimal Inch): 1 in; Shank Length (Decimal Inch): 0.78 in; Maximum Holding Force: 296
• Ball End Mill: 0.078″ Dia, 0.55″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Welding Gloves: Size X-Large, Uncoated, MIG Welding Application Black & Red, Uncoated Coverage, Textured Grip
• Abrasive Belt: 8" Wide, 165" OAL, 60 Grit, Aluminum Oxide
• All-Purpose Cleaner: 15 gal Can Liquid & Aerosol, Citrus Scent
• Ball End Mill: 0.07″ Dia, 0.21″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• Grooving Tool: Full Radius Solid Carbide, 3/8″ Shank Dia, 0.087″ Groove Width
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Acrylic Adhesive Backing
• Welding Gloves: Size Large, Uncoated, MIG Welding Application Black & Red, Uncoated Coverage, Textured Grip
• Grooving Tool: Full Radius Solid Carbide, 3/8″ Shank Dia, 0.055″ Groove Width
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, Black, 10,000 psi Tensile Strength Rockwell M-95
• Corner Chamfer End Mill: 0.5394″ Dia, 1.0236″ LOC, 4 Flute, 0.011″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Grooving Tool: Full Radius Solid Carbide, 3/8″ Shank Dia, 0.039″ Groove Width
• Grooving Tool: Full Radius Solid Carbide, 3/8″ Shank Dia, 0.069″ Groove Width
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, Green, 10,000 psi Tensile Strength Rockwell M-95
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Wrenches For Indexables; Wrench Type: Lock Screw Wrench; Indexable Tool Type: Toolholder; Drive Type: Slotted; Toolholder Style Compatibility: C5-CT-01; Hardware Compatibility: Coolant Tube; Overall Length: 8.07; Tool Material: Steel; Series: C5; Toolhold
• Welding Gloves: Size Medium, Uncoated, MIG Welding Application Black & Red, Uncoated Coverage, Textured Grip
• Micro Drill Bit: 0.0807″ Dia, 143 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• M8x1.25 Coarse 16mm Long Hex Thread Cutting Screw 12L14 Steel, Hex Washer Head, Self Drilling Point, Zinc-Plated
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Indexable High-Feed End Mill: 5/8″ Cut Dia, 1/2″ Modular Shank Uses 4 UNLU Inserts, 0.02″ Max Depth, 0.98″ OAL, Through Coolant
• Stick Welding Electrode: 3/8″ Dia, 12″ Long, Copper
• Indexable Boring Bar: A16T-HWLNR-33, 1.00 mm Shank Dia, 95.00&deg N/A Steel 12.0000″ OAL, Lever,
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Micro Drill Bit: 0.1122″ Dia, 143 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Indexable High-Feed End Mill: 3/4″ Cut Dia, 0.7″ Modular Shank Uses 5 SDXS Inserts, 0.023″ Max Depth, 1″ OAL, Through Coolant
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.1″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Micro Drill Bit: 0.1024″ Dia, 143 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Indexable High-Feed End Mill: 16 mm Cut Dia, 0.62 mm Cylindrical Shank Uses 4 UNLU Inserts, 0.5 mm Max Depth, 150 mm OAL, Through Coolant
• Essential Mist Refill
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.12″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Micro Drill Bit: 0.0965″ Dia, 143 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Indexable High-Feed End Mill: 5/8″ Cut Dia, 5/8″ Cylindrical Shank Uses 4 UNLU Inserts, 0.02″ Max Depth, 6″ OAL, Through Coolant
• Essential Mist Refill
• Collet Screws, Nuts & Springs; Through Coolant: No; Collet Series: ER25; Ice Type: Collet Nut
• Coolant Hose & Hose Assemblies; Product Type: Tube Assembly; Hose Inside Diameter (Inch): 2; Hose Length (Inch): 14; Hose Inside Diameter (Decimal Inch): 2.0000
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Straight; Flute Type: Helical
• Abrasive Belt: 9" Wide, 60" OAL, 220 Grit, Aluminum Oxide
• Micro Drill Bit: 0.0886″ Dia, 143 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Indexable High-Feed End Mill: 3/4″ Cut Dia, 3/4″ Weldon Flat Shank Uses 5 SDXS Inserts, 0.023″ Max Depth, 3-1/2″ OAL, Through Coolant
• Essential Mist Refill
• Indexable High-Feed End Mill: 16 mm Cut Dia, 0.51 mm Modular Shank Uses 4 UNLU Inserts, 0.5 mm Max Depth, 23 mm OAL, Through Coolant
• Micro Drill Bit: 0.0748″ Dia, 143 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Die Drill Bit: 0.3020″ Dia, 135 °, Solid Carbide ALtima Finish, 3/4″ Flute Length, 2-1/2″ OAL
• Indexable Boring Bar: A16T-HCLNL-33, 1.00 mm Shank Dia, 95.00&deg N/A Steel 12.0000″ OAL, Lever,
• Micro Drill Bit: 0.1142″ Dia, 143 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Indexable Boring Bar: A16T-HCLNR-33, 1.00 mm Shank Dia, 95.00&deg N/A Steel 12.0000″ OAL, Lever,
• All-Purpose Cleaner: 1 gal Bottle Liquid, Pungent Scent
• Polyester Film Tape: 4″ Wide, 18 yd Long, 3.3 mil Thick 50 Lb/In Tensile Strength, Silicone Adhesive, 425 ° F
• Micro Drill Bit: 0.063″ Dia, 143 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Abrasive Belt: 9" Wide, 60" OAL, 150 Grit, Aluminum Oxide
• Indexable Chamfer & Angle End Mills; Minimum Cutting Diameter (Inch): 7/8; Minimum Cutting Diameter (Decimal Inch): 0.8750; Maximum Cutting Diameter (Decimal Inch): 1.1230; Lead Angle: 75; Maximum Depth of Cut (Decimal Inch): 0.4600; Compatible Insert Siz
• Latches; Type: Corner Fastener with Angled Counterplate; Length (mm): 56.00; Width (mm): 39.00; Height (mm): 52.0000; Finish/Coating: Polished; Distance Between Mounting Hole Centers: 25; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainles
• Replaceable Tip Drill: 15 to 15.9 mm Drill Dia, 78.47 mm Max Depth, 20 mm Straight-Cylindrical Shank Uses H3P Inserts, 156.16 mm OAL, Through Coolant
• Micro Drill Bit: 0.0413″ Dia, 143 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Hatchets & Axes; Type: Forestry Hatchet; Overall Length Range: 14″ - 20.9″; Head Weight Range: 1 - 2.9 lbs.; Handle Material: Ash; Blade Length (Inch): 4-1/8; Head Weight (Grams): 600; Overall Length (mm): 385.0000; Additional Information: Blade Width: 10
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 24' Long x 18' Wide, 5 mil Polyethylene, Rectangle
• Indexable Boring Bar: A16T-HSKNL-33, 1.00 mm Shank Dia, 75.00&deg N/A Steel 12.0000″ OAL, Lever,
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 24' Long x 18' Wide, 5 mil Polyethylene, Rectangle
• Indexable Boring Bar: A16T-HSKNR-33, 1.00 mm Shank Dia, 75.00&deg N/A Steel 12.0000″ OAL, Lever,
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 24' Long x 18' Wide, 5 mil Polyethylene, Rectangle
• Indexable Boring Bar: A16T-HTFNR-2.53, 1.00 mm Shank Dia, 91.00&deg N/A Steel 12.0000″ OAL, Lever,
• Corner Radius End Mill: 0.1563″ Dia, 15/64″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 5/32″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Abrasive Belt: 9" Wide, 60" OAL, 150 Grit, Aluminum Oxide
• Chucking Reamer: 17/64″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, Cobalt 6 Flute
• Indexable Boring Bar: A16T-HWLNL-33, 1.00 mm Shank Dia, 95.00&deg N/A Steel 12.0000″ OAL, Lever,
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 46.0000; Finish Coating: TiCN; Series
• Abrasive Belt: 9" Wide, 60" OAL, 100 Grit, Aluminum Oxide
• Black Tee: 1-1/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 41.0000; Finish Coating: TiCN; Series
• Metering Pump Accessories; Type: Pump Repair Kit; For Use With: CR500V400CRTC; Length (Decimal Inch): 7.0000; For Use With: CR500V400CRTC
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Replaceable Tip Drill: 0.6094 to 0.6259'' Drill Dia, 5.0468″ Max Depth Seat Size 0.2160, Through Coolant
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 35.4000; Finish Coating: TiCN; Serie
• Replaceable Tip Drill: 0.5708 to 0.5669'' Drill Dia, 4.7187″ Max Depth Seat Size 0.2160, Through Coolant
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 41.0000; Finish Coating: TiCN; Serie
• Plastic Sheet: Acetal, 1/16″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Replaceable Tip Drill: 0.5511 to 0.6062'' Drill Dia, 4.875″ Max Depth Seat Size 0.2160, Through Coolant
• Strip: Buna-N Rubber, 2″ Wide, 120″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Locking Inlet: Plug, Industrial, L21-20P, 120 & 208V, Black & White Self-Grounding, 20A, Nylon, 4 Poles, 5 Wire
• Wet & Dry Cut Saw Blade: 8″ Dia, 5/8″ Arbor Hole, 0.0709″ Kerf Width, 42 Teeth Use on Metal, Standard Round Arbor
• Coolant Hose Adapters, Connectors & Sockets; Type: Adapter; Body Material: Acetal Copolymer; Product Type: Adapter
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 19.6 mm OD, 10 mm Stroke, M14 x 1.5 Thread 80 mm OAL, 9.8 lb Force
• Abrasive Belt: 9" Wide, 60" OAL, 100 Grit, Aluminum Oxide
• Abrasive Belt: 9" Wide, 60" OAL, 80 Grit, Aluminum Oxide
• Hex Head Cap Screw: 3/4-16 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• 320 Grit Aluminum Oxide Rectangular Polishing Stone Coarse/Medium Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• 1/4 Inch NPT, 100 Max psi, Steel Case Cylinder Pressure Gauge 2 Inch Dial Diameter, All Gases
• Welded Bandsaw Blade: 5' 8-3/8″ Long, 1/2″ Wide, 0.035″ Thick, 10 to 14 TPI Bi-Metal, Toothed Edge
• Indexable Drill Insert: TOGT14DT IC908, Carbide Coated, 60 ° Triangle
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• #8-32, 1-7/8″ OAL, 5/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/2″ Body Length, 3/8″ Thread Length, 7/16″ Thread Depth, Grade 303, Uncoated
• Grooving Tool: RH Cut, Micro Internal Solid Carbide
• Abrasive Belt: 9" Wide, 60" OAL, 80 Grit, Aluminum Oxide
• #8-32, 1-3/8″ OAL, 5/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1″ Body Length, 3/8″ Thread Length, 7/16″ Thread Depth, Grade 303, Uncoated
• Abrasive Belt: 9" Wide, 60" OAL, 60 Grit, Aluminum Oxide
• Chucking Reamer: 0.076″ Dia, 1-3/4″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Welded Bandsaw Blade: 16' 5″ Long, 1″ Wide, 0.035″ Thick, 1.3 TPI Carbon Steel, Toothed Edge
• Industrial & Laundry Faucets; Type: Center Faucet Body; Style: Wall Mount; Design: Wall Mount; Handle Type: Lever; Spout Type: No Spout; Mounting Centers: 8; Finish/Coating: Chrome Plated; Type: Center Faucet Body; Minimum Order Quantity: Chrome Plated; S