Products

• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 8.0000; Outside Diameter: 13.5000; Wall Thickness (mm): 2.75; Material: EPDM; Standard Coil Length (Feet): 100; Maximum Working Pressure (psi): 145; Hardness: 75A; Special Item Information: Polyester
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Tool: LH Cut Solid Carbide
• Toner Cartridge: Black Use with HP Laserjet Pro M118DW & Laserjet Pro MFP M148DW, M148FDW
• Plastic Sheet: Polyvinylchloride, 1/2″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Sheet: Silicone Rubber, 18″ Wide, 36″ Long, Red Durometer 50, High Temperature Adhesive Backing
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Tool: LH Cut Solid Carbide
• Plastic Bar: High Density Polyethylene, 3/4″ Thick, Opaque White
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Plastic Bar: High Density Polyethylene, 1″ Thick, Opaque White
• Life Jackets & Vests; Type: Mesh Deluxe Vest; Size: 2XL; Material: Retroreflective; Minimum Buoyancy (lbs): 15.5; USCG Rating: 3; Additional Information: Lightweight & Durable; Dual Cargo Pockets; Hidden Belts to Reduce Snags; Two 1 in Encircling Belts wi
• Grooving Tool: RH Cut Solid Carbide
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Thread Forming Tap: #2-56, DIN 2184-1, 2BX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Grooving Tool: RH Cut Solid Carbide
• Tap Collet: ER20, 0.194″ #10 to 3/16″ Tap
• Abrasive Belt: 10" Wide, 70-1/2" OAL, 60 Grit, Aluminum Oxide
• Copy Paper: Use with Copy & Printer
• Tap Collet: ER16, 0.168″ #8 to 5/32″ Tap
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Hex Head Cap Screw: 7/8-9 x 10″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Tap Collet: ER16, 0.22″ #12 to 7/32″ Tap
• Eye Nuts (Lifting); Type: Eye Nut; Media Capacity (Lb.): 29400; Material: Carbon Steel; Thread Size: 1-1/4-7; System of Measurement: Inch; Eye Inside Diameter: 2 in; Eye Outside Diameter: 4 in; Eye Inside Diameter (Inch): 2; Eye Inside Height: 3.0310 in;
• M6x1, 57.7mm OAL, 13mm Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 45mm Body Length, 12.7mm Thread Length, 15mm Thread Depth, Grade T-3, Uncoated
• Abrasive Belt: 10" Wide, 70-1/2" OAL, 40 Grit, Aluminum Oxide
• Spare Parts Packages For Indexables; Indexable Tool Type: Drilling; For Use With: CrownLoc Drill Bodies; Package Includes: Screws; Rod; Spring; Series: SD103; Includes: Screws; Rod; Spring; Parts Package Type: Drilling
• Collet Tool Holders; Collet Series: ER11; Overall Length: 1.12; Material: Steel
• #8-32, 1-1/4″ OAL, 3/8″ Across Flats, Stainless Steel Female Hex Circuit Board Standoff Partially Threaded, Grade 303, Uncoated
• Drill Mills; Mill Diameter (Inch): 1/8; Mill Diameter (Decimal Inch): 0.1250; Length of Cut (Inch): 5/8; Number Of Flutes: 4; End Mill Material: Solid Carbide; Shank Diameter (Inch): 1/8
• Black 90 ° Elbow: 1-1/4 x 1″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Tap Collet: ER16, 0.194″ #10 to 3/16″ Tap
• Grooving Tool: Retaining Ring Solid Carbide, 1/2″ Shank Dia, 0.125″ Groove Width
• Tap Collet: ER20, 0.381″ 3/8″ Tap
• Grooving Tool: Retaining Ring Solid Carbide, 1/2″ Shank Dia, 0.125″ Groove Width
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Tap Collet: ER20, 0.367″ 1/2″ Tap
• Grooving Tool: Retaining Ring Solid Carbide, 1/2″ Shank Dia, 0.187″ Groove Width
• Tap Collet: ER20, 0.323″ 7/16″ Tap
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Buna-N Foam: 2″ Wide, 120″ Long, Black Plain Backing
• Tap Collet: ER20, 0.318″ 5/16″ Tap
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.10; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4; Functional Length (mm): 2.50; Prima
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Tap Collet: ER20, 0.168″ #8 to 5/32″ Tap
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.20; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4; Functional Length (mm): 2.50; Prima
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.30; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4; Functional Length (mm): 2.50; Prima
• Trade Hammers; Handle Material: Ash
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Collet Tool Holders; Collet Series: ER16; Overall Length: 1.49; Material: Steel
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.40; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4; Functional Length (mm): 2.50; Prima
• Collet Set: 15 Pc, Series ER25
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.80; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4.5; Functional Length (mm): 2.80; Pri
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grease: 10 oz Tube Black
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.90; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4.5; Functional Length (mm): 2.80; Pri
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.50; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4; Functional Length (mm): 2.80; Prima
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.70; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4.5; Functional Length (mm): 2.80; Pri
• Wipe Dispensers; For Use With: Portion Pac 1432; Dispenser Color: White
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.30; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.90; Prima
• Quick Dam 5' Flood Barriers 4 Pack
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.40; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.90; Prima
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.10; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.90; Prima
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Hex Head Cap Screw: 7/8-14 x 3″, Grade 9 Alloy Steel, Zinc-Plated
• Abrasive Belt: 10" Wide, 70-1/2" OAL, 36 Grit, Aluminum Oxide
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.20; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.90; Prima
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.70; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.90; Pri
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Sheet: Buna-N Rubber, 12″ Wide, 18″ Long, Black Durometer 40, Plain Backing
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.60; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.90; Pri
• Plastic Bar: Garolite, 3/8″ Thick, Yellow
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Taper Length Drill Bit: 0.3937″ Dia, 130 ° Bright/Uncoated, 4.7656″ Flute Length, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.90; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.90; Pri
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.00; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4; Functional Length (mm): 2.50; Prima
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 90, Plain Backing
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.50; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.90; Prima
• Straight-Flute & Die Drill Bits
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.017″ Groove Width
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 4.60; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 4.5; Functional Length (mm): 2.80; Pri
• Downlights; Overall Width/Diameter (Decimal Inch): 7.62; Housing Type: Retrofit; Remodel; Insulation Contact Rating: IC Rated; Lamp Type: LED; Voltage: 120; Overall Width/Diameter (Inch): 7.62
• Extra Length Drill Bit: 0.2189″ Dia, 130 °, High Speed Steel Uncoated, Parabolic Flute, Straight-Cylindrical Shank, Series 504
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.00; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5; Functional Length (mm): 2.90; Prima
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.01″ Groove Width
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 5.80; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 5.5; Functional Length (mm): 2.90; Pri
• Single Profile Thread Mill: 5/16-14 to 5/16-48, 14 to 48 TPI, Internal & External, 4 Flutes, Solid Carbide 1/4″ Shank Dia, 2.5″ OAL, AlTiN Coated
• Half-Round & Spade Drill Bits; Drill Bit Type: Aircraft Dagger Drill; Drill Bit Size (Decimal Inch): 0.1960; Drill Bit Size (Wire): #9; Drill Point Angle: 120; Drill Bit Material: Solid Carbide; Overall Length (Decimal Inch): 6; Overall Length (Inch): 6;
• Hex Head Cap Screw: 1/2-20 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.015″ Groove Width
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Single Profile Thread Mill: #1-8 to #1-72, 8 to 72 TPI, Internal & External, 2 Flutes, Solid Carbide 0.054″ Cut Dia, 1/8″ Shank Dia, 1.5″ OAL, Bright/Uncoated
• Extra Length Drill Bit: 0.2264″ Dia, 130 °, High Speed Steel Bright Finish, 5.512″ Flute Length, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Half-Round & Spade Drill Bits; Drill Bit Type: Aircraft Dagger Drill; Drill Bit Size (Decimal Inch): 0.1935; Drill Bit Size (Wire): #10; Drill Point Angle: 120; Drill Bit Material: Solid Carbide; Overall Length (Decimal Inch): 6; Overall Length (Inch): 6;
• Single Profile Thread Mill: 1/4-18 to 1/4-56, 18 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.18″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, AlTiN Coated
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Single Profile Thread Mill: 1/4-18 to 1/4-56, 18 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.18″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, AlTiN Coated
• Half-Round & Spade Drill Bits; Drill Bit Type: Aircraft Dagger Drill; Drill Bit Size (Decimal Inch): 0.1990; Drill Bit Size (Wire): #8; Drill Point Angle: 120; Drill Bit Material: Solid Carbide; Overall Length (Decimal Inch): 6; Overall Length (Inch): 6;
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Half Facepiece Respirator: Silicone, Bayonet, Large -
• Single Profile Thread Mill: #2-56 to #2-64, 56 to 64 TPI, Internal & External, 2 Flutes, Solid Carbide 0.064″ Cut Dia, 1/8″ Shank Dia, 1.5″ OAL, Bright/Uncoated
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1960; Drill Bit Size (Wire): #9; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal Inch)
• Single Profile Thread Mill: 1/4-18 to 1/4-56, 18 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.18″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, AlTiN Coated
• Bridge/Construction Reamers; Reamer Type: Bridge Reamer; Reamer Diameter (Inch): 1-1/8; Shank Type: Hex Shank; Flute Length (Inch): 7-3/8; Small End Diameter: 1.13 in; Tool Material: High Speed Steel; Small End Diameter (Inch): 1.13; 1.13 in; Spiral Direc
• Half Facepiece Respirator: Silicone, Bayonet, Medium -
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Single Profile Thread Mill: #5-40 to #5-44, 40 to 44 TPI, Internal & External, 4 Flutes, Solid Carbide 3/16″ Shank Dia, 2″ OAL, Bright/Uncoated
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1990; Drill Bit Size (Wire): #8; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal Inch)
• Abrasive Belt: 10" Wide, 70-1/4" OAL, 36 Grit, Aluminum Oxide
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Taper Length Drill Bit: 0.3680″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1935; Drill Bit Size (Wire): #10; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal Inch
• Abrasive Belt: 9" Wide, 138-1/2" OAL, 150 Grit, Aluminum Oxide
• Milling Tip Inserts; Milling Tip Type: T-Slot; Tool Material: Carbide; Manufacturer Grade: AH735; Insert Hand: Right Hand; Chipbreaker: None; Series: VTB; Coating Process: PVD; Primary Workpiece Material: Stainless Steel; Cast Iron; Steel; Primary Workpie
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Convex Knurl Wheel: 1/2″ Dia, 90 ° Tooth Angle, 25 TPI, Diagonal, Cobalt 3/16″ Face Width, 3/16″ Hole, Helix, Series EPV
• Modular Fixturing Receiver Bushings; System Compatibility: SpeedLoc; Outside Diameter (Decimal Inch): 2.1250; 2.125 in; Inside Diameter (mm): 2.1254 in; Mount Type: Threaded; Additional Information: Pocket C'Bore Depth: 0.6300; Clearance Thru Hole Diamete
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• PVC Tube: 5/16″ ID, 7/16″ OD, 50' Long 25 Max psi, Yellow
• Edger Electric, 120V
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Life Jackets & Vests; Type: First Responder Vest; Material: Fleece/Solas; Minimum Buoyancy (lbs): 15.5; USCG Rating: 3
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Life Jackets & Vests; Type: First Responder Vest; Material: Fleece/Solas; Minimum Buoyancy (lbs): 15.5; USCG Rating: 3
• Modular Threading Cutting Unit Heads; System Size: C5; Series Name: C_-SER/L; Thread Type: External; Cutting Direction: Right; Compatible Insert Style: ER; Compatible Insert Size Code: 22; Center To Cutting Edge: 35.00 mm; Head Length/Projection (Decimal
• Plastic Bar: Acrylonitrile Butadiene Styrene, 3/8″ Thick, Beige Rockwell R-105
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Modular Threading Cutting Unit Heads; System Size: C5; Series Name: C_-SER/L; Thread Type: External; Cutting Direction: Left; Compatible Insert Style: ER; Compatible Insert Size Code: 16; Center To Cutting Edge: 35.00 mm; Head Length/Projection (Decimal I
• Care Instructions Label: ″Fragile, Please Handle With Care, Thank You″, Rectangle, 5″ Wide, 3″ High Paper
• Die Drill Bit: 0.3160″ Dia, 140 °, Solid Carbide Bright Finish, 1-11/16″ Flute, 2-15/16″ OAL, Series 470
• Retractable Ball Point Pen: 1 mm Tip, Black Ink
• Pipe & Tube Cutters; Minimum Pipe Capacity (Inch): 3/4; Maximum Pipe Capacity (Inch): 3/4; Cuts Material Type: Copper, Aluminum, Brass, Thin Wall Steel, Stainless Steel
• Modular Threading Cutting Unit Heads; System Size: C5; Series Name: C_-SER/L; Thread Type: External; Cutting Direction: Right; Compatible Insert Style: ER; Compatible Insert Size Code: 16; Center To Cutting Edge: 35.00 mm; Head Length/Projection (Decimal
• Corner Radius End Mill: 0.0315″ Dia, 0.0472″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Care Instructions Label: ″Fragile, Handle with Care″, Rectangle, 5″ Wide, 3″ High Paper
• Taper Shank Drill Bit: 0.7087″ Dia, 2MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 5.1181″ Flute Length, 8.9764″ OAL, N Point, Spiral Flute
• Indexable High-Feed End Mill: 7/8″ Cut Dia, 3/4″ Cylindrical Shank Uses 3 UNLU Inserts, 0.043″ Max Depth, 7-3/4″ OAL, Through Coolant
• Extra Length Drill Bit: 0.378″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• 8″ Single Brush Sweeper Manual, Rubber Wheels, Nylon Bristles
• Welded Bandsaw Blade: 16' 11″ Long, 1-1/4″ Wide, 0.042″ Thick, 5 to 8 TPI Carbon Steel, Toothed Edge
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Taper Shank Drill Bit: 0.6791″ Dia, 2MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 5.1181″ Flute Length, 8.9764″ OAL, Cone Relief Point, Spiral Flute
• Helical Flute Thread Mill: #1, Internal & External, 6 Flute, 3/4″ Shank Dia, Solid Carbide 0.745″ Cut Dia, 2″ LOC, TiAlN Coated
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Accident Prevention Label: ″This Side Up″, Rectangle, 5″ Wide, 3″ High Paper
• Helical Flute Thread Mill: 1-3/8, Internal & External, 5 Flute, 3/4″ Shank Dia, Solid Carbide 6 TPI, 0.745″ Cut Dia, 1-1/2″ LOC, TiAlN Coated
• 400 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/2″ Thick
• Lathe Chuck Accessories; Accessory Type: Plunger Nut; Product Compatibility: MH-206 Chuck; Number Of Pieces: 1
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• FRL Parts; Product Type: Repair Kit; For Use With: B07 Filter/Regulators; Compatible Tool Type: Filter Regulator Lubricator
• Indexable High-Feed End Mill: 7/8″ Cut Dia, 0.8465″ Cylindrical Shank Uses 3 UNLU Inserts, 0.043″ Max Depth, 7-3/4″ OAL, Through Coolant
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Helical Flute Thread Mill: #1, Internal & External, 5 Flute, 3/4″ Shank Dia, Solid Carbide 0.745″ Cut Dia, 1.219″ LOC, TiAlN Coated
• Helical Flute Thread Mill: 1-3/8, Internal & External, 5 Flute, Solid Carbide TiAlN Coated
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Helical Flute Thread Mill: 2-1/2, Internal & External, 5 Flute, Solid Carbide TiAlN Coated
• Helical Flute Thread Mill: 2-1/2, Internal & External, 5 Flute, Solid Carbide TiAlN Coated
• Helical Flute Thread Mill: #1, Internal & External, 6 Flute, Solid Carbide TiAlN Coated
• Modular Turning & Profiling Cutting Unit Heads; Cutting Direction: Neutral; Compatible Insert Style: QC16; Compatible Insert Size Code: QC12; Insert Holding Method: Screw; Lever; Clamp; Series: QC16
• Modular Turning & Profiling Cutting Unit Head: Size C4, 63 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses VN.. Inserts, Through Coolant
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Modular Turning & Profiling Cutting Unit Head: Size C4, 62 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses VN.. Inserts, Through Coolant
• Modular Turning & Profiling Cutting Unit Head: Size C4, 62 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses VN.. Inserts, Through Coolant
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Die Drill Bit: 0.3661″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Helical Flute Thread Mill: Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Helical Flute Thread Mill: #2, Internal & External, 3 Flute, 1/8″ Shank Dia, Solid Carbide 0.065″ Cut Dia, 1/8″ LOC, TiAlN Coated
• Safety Can Accessories; Type: Antistatic Wires; Safety Can Compatibility: Type I & Type II Safety Cans; Length (Inch): 36; Material: Aircraft Cable; Color: Silver and Brass
• Ball End Mill: 0.075″ Dia, 0.113″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Single End
• Helical Flute Thread Mill: #2, Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Helical Flute Thread Mill: #4, Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Ball End Mill: 0.045″ Dia, 0.068″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Single End
• Helical Flute Thread Mill: #2, Internal & External, 3 Flute, Solid Carbide 56 TPI, TiAlN Coated
• Helical Flute Thread Mill: Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Helical Flute Thread Mill: Internal & External, 3 Flute, Solid Carbide TiAlN Coated
• Spade Drill Insert: 15 mm Dia, Series 15, Solid Carbide AM420 Finish, Series 15
• 320 Grit Silicon Carbide Rectangular Polishing Stone Extra Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• Spade Drill Insert: 14 mm Dia, Series 14, Solid Carbide AM420 Finish, Series 14
• 400 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1″ Wide x 6″ Long x 1/8″ Thick
• Power Riveter Accessories
• Plastic Sheet: Garolite, 1/4″ Thick, Yellow, 36,000 psi Tensile Strength Rockwell M-110
• Jobber Length Drill Bit: 0.2421″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• 320 Grit Aluminum Oxide Rectangular Polishing Stone Extra Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• Spade Drill Insert: 9/16″ Dia, Series 14, Solid Carbide AM420 Finish, Series 14
• 1200 Grit Aluminum Oxide Rectangular Polishing Stone Ultra Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• Die Drill Bit: 0.2460″ Dia, 140 °, Solid Carbide Bright Finish, 1-3/8″ Flute, 2-1/2″ OAL, Series 470
• Plastic Sheet: Garolite, 1/32″ Thick, Off-White, 39,000 psi Tensile Strength Rockwell M-110
• Corner Radius End Mill: 3/8″ Dia, 5/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Spot Welder Tips; Tip Type: Variable Offset Shank for 5RW Female Cap; Material: RWMA Class 2 - C18200; Type: Variable Offset Shank for 5RW Female Cap
• Linear Motion Systems; Type: Linear Guide; Linear Motion Type: Linear Guide; Thread Size: M10 x 1.5; Overall Width (Decimal Inch): 0.5000; Overall Length (mm): 44.4500; Thread Size: M10 x 1.5
• Sanitary Stainless Steel Pipe Fittings; Material Grade: FDA
• Corner Radius End Mill: 3/8″ Dia, 5/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 5/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• 400 Grit Aluminum Oxide Square Polishing Stone Medium Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• Grooving Tool: Internal Solid Carbide
• 3/8″ Diam 1-1/8″ Flute Length 120° Solid Carbide Aircraft Extension Drill Bright/Uncoated, Straight-Cylindrical Shank, Four-Facet Point, Series 4210
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1590; Drill Bit Size (Wire): #21; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal Inch
• Corner Radius End Mill: 3/8″ Dia, 5/8″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Extra Length Drill Bit: 0.0937″ Dia, 130 °, High Speed Steel TiN Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 670
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1562; Drill Bit Size (Inch): 0.1562; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal I
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1610; Drill Bit Size (Wire): #20; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal Inch
• Extra Length Drill Bit: 0.0906″ Dia, 130 °, High Speed Steel TiN Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 670
• Hex Lock Nut: 9/16-18, Grade 9 Steel, Cadmium-Plated with Wax 0.486″ High, 7/8″ Width Across Flats, Right Hand Thread
• Wall Clocks; Type: Dial; Wall; Clock Type: Dial; Display Type: Analog; Power Source: Battery; Face Color: White; Case Color: Black; Face Diameter: 14.5 in; Face Diameter: 14.500; Face Diameter: 14.5 in; Mount Type: Wall; Battery Size: AA; Overall Height:
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 20' Long x 12' Wide, 16 mil Polyethylene, Rectangle
• Combination Drill & Reamers; Reamer Size (mm): 10; Reamer Material: Micron Grain Carbide; Reamer Finish/Coating: Coated; Diamond; Coating: Diamond; Shank Diameter: 0.3937; Series: UDM5A2AA; Tool Performance: High Performance; Included Angle: 135.00; Pilot
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Welded Bandsaw Blade: 21' 1″ Long, 3/4″ Wide, 0.032″ Thick, 4 TPI Carbon Steel, Toothed Edge
• Black Coupling: 1-1/2″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Hedge Trimmer Battery, 22″ Cutting Width, 20V
• Abrasive Belt: 9" Wide, 138-1/2" OAL, 120 Grit, Aluminum Oxide
• Taper Length Drill Bit: 0.2953″ Dia, 130 ° Bright/Uncoated, 4.0156″ Flute Length, 6.1406″ OAL, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Extended; Pushbutton Shape: Square; Pushbutton Color: Red; Blue; Green; Operator Illumination: Illuminated; Operation Type: Momentary (MO); Amperage (mA): 5; Voltage: 12-24; Contact Form: SPD
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated
• Taper Shank Drill Bit: 0.2811″ Dia, 1MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 2.7165″ Flute Length, 5.9055″ OAL, Cone Relief Point, Spiral Flute
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Extended; Pushbutton Shape: Square; Pushbutton Color: Red; Blue; Green; Operator Illumination: Illuminated; Operation Type: Momentary (MO); Amperage (mA): 5; Voltage: 12-24; Contact Form: SPD
• Taper Shank Drill Bit: 0.4375″ Dia, 1MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 3.7008″ Flute Length, 6.8898″ OAL, Cone Relief Point, Spiral Flute
• Ball Grip Quick-Release Pin: Button Handle, 3/4″ Pin Dia, 2″ Usable Length 3.68″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Hex Head Cap Screw: 5/8-11 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Taper Shank Drill Bit: 0.5″ Dia, 1MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 3.9764″ Flute Length, 7.1654″ OAL, N Point, Spiral Flute
• Paints
• Floor Cleaner: 1 gal Bottle, Use On Floors Hard Floor Care
• Hex Lock Nut: 7/16-14, Grade 9 Steel, Cadmium-Plated with Wax 3/8″ High, 11/16″ Width Across Flats, Right Hand Thread
• Riser & Ramp Accessories; Type: Approach Ramp; Includes: One (1) Approach Ramp; Overall Length (Decimal Inch): 65.0000
• Stanchion: 40″ High, Dome Base
• Stanchion: 40″ High, Dome Base
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 32.0000; Outside Diameter: 42.0000; Wall Thickness (mm): 5.00; Material: PVC; Standard Coil Length (Feet): 5; Maximum Working Pressure (psi): 75; Hardness: 70A; Special Item Information: Polyester Br
• Micro Drill Bit: 0.0965″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 1.9685″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Micro Drill Bit: 0.0925″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 1.9685″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Plastic Sheet: Polycarbonate, 3/16″ Thick, Tinted Gray, 9,000 psi Tensile Strength Rockwell R-120