HSK100 1 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100106309
Manufacturer: Parlec
Mfg #: H100A-10SF

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-10SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

GROUND PAD FOR T8430DR-12'X12' BERM

Item #: LC50T8430GP
Manufacturer: Eagle
Mfg #: T8430GP

Technical Specifications:
•Brand Name: Eagle

Description:


Shipping Info:
•Actual Weight - 30.0000

W-2929-25 SUPPLIED AIR HOSE

EARPLUGS 391-1100 ONE TOUCH REFILL

Item #: KB3519102
Manufacturer: 3M
Mfg #: 1008052919

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 9.9350

EN2606NX12 6" X 12'

Item #: SE82EN2606NX12
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
•Actual Weight - 14.7000 •Dimensions - Height: 6.00 Length: 18.0 Width: 7.00

C6SVJCR45065-16 TUNGCAP HOLDER

Item #: TG206885206
Manufacturer: Tungaloy
Mfg #: 6885206

Technical Specifications:
*Brand Name: Tungaloy

Description:


Shipping Info:
*Actual Weight - 3.0190

Tongue & Groove Jaw - HD 1-Step Rev Hard Jaw

Item #: HF7028HTGRJSS
Manufacturer: H & R
Mfg #: HR-28-HTGR

Technical Specifications:
*Bolt size: 7/8 *Brand Name: H & R *Class: Lathe Chucks & Accessories *Dimension B: 3.750 *Dimension C: 3 *Dimension D: .500 *Dimension E: .750 *Dimension F: 3.000 *Dimension J: 3-3/4 *Dimension L: 2.000 *For Chuck Size: 24 - 36 *Jaw Length: 6.960 *Number of Holes: 2 *Style: Heavy Duty 1-Step Rev Hard Jaw *Type: Tongue & Groove Jaw

Description:
*American Standard Tongue & Groove (A.S.T.G.) Heavy Duty Reversible Hard Jaw *For Bergman, Bison, Buck, Cushman, Huron, Rohm, Forkhardt, Pratt Burnerd America, SCA, SP, W & S, Nobel & Yuasa *PRICED EACH SOLD ONLY IN MATCHED SETS OF 3

Shipping Info:
*Actual Weight - 11.7000

Machinist Clamping Set - #20415; 5/8-11 Stud Size; 11/16 T-Slot Size

Item #: SG5020415
Manufacturer: Te-Co
Mfg #: 20415

Technical Specifications:
*Brand Name: Te-Co *Step Block & Clamp Set Number: 21003 *Stud Size: 5/8-11 *T-Nut Number: 41415 *Table T-Slot Size: 11/16 *Type: Machinist Clamping Set

Description:
*Machinist Clampin Sets Contains: *6 Flange nuts *6 T-Slot nuts *4 Coupling nuts *6 Step blocks *6 Serrated end clamps *1 T-Slot cleaner *24 Studs; 4 each of 3, 4, 5, 6, 7 & 8" long *Bridgeport Set *1 Holder

Shipping Info:
*Actual Weight - 28.7500 *Dimensions - Height: 5.50 Length: 18.0 Width: 9.30

3/4-10 x 1-1/4 - Black Finish Heat Treated Alloy Steel - Cap Screws - Socket Head

Item #: SH8012020
Manufacturer: Holo-Krome
Mfg #: 72302

Technical Specifications:
*Box Qty.: 25 *Brand Name: Holo-Krome *Coating: Black Finish *Hex Key: 5/8 *Length: 1-1/4 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Socket Head *Size: 3/4-10 *Thread: Coarse

Description:
*Socket Head Cap Screws *UNRC Coarse Thread *Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance *Socket cap screws are internally wrenched, and are black finished in appearance *Heat treated alloy steel *Complete traceability *Quality controlled products machined to ANSI/ASTM Standards *Heat treated alloy, unified 3A thread fit

Shipping Info:
*Actual Weight - .2840

Tool No. 5 Taper Toolholder 60EA

Item #: GG35D60EA5
Manufacturer: Dorian
Mfg #: 01872

Technical Specifications:
*Brand Name: Dorian *Description: Morse Taper *Series: D60EA *Tool Holder Capacity: 5 MT

Description:
*For taper holder as a drill chuck reamer, to be used with power feed.

Shipping Info:
*Actual Weight - 14.7500

3 Swivel Head Knurl Tool - 1 x .236 x 5/16 Wheel

Item #: GG353SHKT75M
Manufacturer: Dorian
Mfg #: 21530

Technical Specifications:
*Brand Name: Dorian *Center Height: 3/4 *Knurl Pin Set Number: KPS-31-100 *Knurl Wheel Size: 1 x .236 x 5/16 *Pitch: Circular *Shank Size: 3/4 x 1 *Style: Three Swivel Head *Supplied With: (2) 16 TPI, (2) 25 TPI & (2) 35 TPI Diagonal knurl wheels for diamond pattern

Description:
*3SHKT *Specifically designed for CNC lathe. Precision square shank with preset center height *Single knurl wheel set at 30° for cutting a straight pattern *The knurl wheel is mounted between the thrust washers to ensure a smooth and even rotation of the knurl while knurling is performed *Rotating knurling head for a precise alignment to the working part.

Shipping Info:
*Actual Weight - 3.2500 *Dimensions - Height: 3.30 Length: 5.70 Width: 3.30

UU2804NX15 4" X 15'

Item #: SE80UU2804NX15
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
•Actual Weight - 15.2000 •Dimensions - Height: 4.00 Length: 17.0 Width: 8.00

EE2806TTX20 6" X 20' E/E

Item #: SE82EE2806TTX20
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
•Actual Weight - 15.5000 •Dimensions - Height: 6.00 Length: 18.0 Width: 8.00

Riser Block for Milling Machine - 6" For Millport

Item #: JF710370239
Manufacturer: High Quality Tools
Mfg #:

Technical Specifications:
•Brand Name: High Quality Tools •Class: Milling Machine Accessories •Dimension A: 6 •Dimension B: 12.481 •Dimension C: 6.670 •Dimension D: 9.634 •Dimension E: 12.496 •For Use With: Millport •Model Number: 370239 •Type: Riser Block for Milling Machine •Weight: 57 lbs

Description:
•Bolts are required for installation •Spiders are optional •1701 & 1702 For old style 9" x 48" Bridgeport only •All 9" x 49" Bridgeport use millport model •Millport also fits a variety of other Taiwan type mills such as Acer, Alliant & more •Risers are light gray color only - DOES NOT match Bridgeport gray color

Shipping Info:
•Actual Weight - 57.0000

Riser Block for Milling Machine - 6" For Lagun

Item #: JF710370376
Manufacturer: High Quality Tools
Mfg #:

Technical Specifications:
•Brand Name: High Quality Tools •Class: Milling Machine Accessories •Dimension A: 6 •Dimension B: 12.518 •Dimension C: 6.750 •Dimension D: 9.626 •Dimension E: 12.521 •For Use With: Lagun •Model Number: 037-0376 •Type: Riser Block for Milling Machine •Weight: 57 lbs

Description:
•Bolts are required for installation •Spiders are optional •1701 & 1702 For old style 9" x 48" Bridgeport only •All 9" x 49" Bridgeport use millport model •Millport also fits a variety of other Taiwan type mills such as Acer, Alliant & more •Risers are light gray color only - DOES NOT match Bridgeport gray color

Shipping Info:
•Actual Weight - 57.0000

EE2806TFX20 6" X 20' E/E

Item #: SE82EE2806TFX20
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
•Actual Weight - 15.5000 •Dimensions - Height: 6.00 Length: 18.0 Width: 8.00

Riser Block for Milling Machine - 6" For Kondia

Item #: JF710370282
Manufacturer: High Quality Tools
Mfg #:

Technical Specifications:
•Brand Name: High Quality Tools •Class: Milling Machine Accessories •Dimension A: 6 •Dimension B: 12.793 •Dimension C: 6.310 •Dimension D: 10.030 •Dimension E: 12.810 •For Use With: Kondia •Model Number: 037-0282 •Type: Riser Block for Milling Machine •Weight: 57 lbs

Description:
•Bolts are required for installation •Spiders are optional •1701 & 1702 For old style 9" x 48" Bridgeport only •All 9" x 49" Bridgeport use millport model •Millport also fits a variety of other Taiwan type mills such as Acer, Alliant & more •Risers are light gray color only - DOES NOT match Bridgeport gray color

Shipping Info:
•Actual Weight - 57.0000

12 x 6 x 5" - A80R2R / Centerless & Cylindrical Wheel

Item #: MG641261
Manufacturer: Cratex
Mfg #: 1261

Technical Specifications:
*Brand Name: Cratex

Description:
*Centerless Grinding Regulating Feed Wheels *Rubber Bonded - Standard Marking A80R2R

Shipping Info:

2" ALUMINUM STEP BLOCK KIT

Item #: SG6621711
Manufacturer: Jergens
Mfg #: 21711

Technical Specifications:
*Brand Name: Jergens *Description: Heavy Duty Aluminum 2"W Kit Includes: 8 ea of #21702, 21705; 4 ea #21703, 16 ea #27106 *Number of Pieces: 36 *Type: Aluminum Step Bock Kit

Description:
*Step blocks are made of aluminum & steel to prevent damage to machine table surfaces *Tooth design has no sharp edges which helps to prevent burrs and chip build-up in the steps

Shipping Info:
*Actual Weight - 6.4200 *Dimensions - Height: 3.00 Length: 12.5 Width: 8.00

Slotted Shim Sets-10 pcs Each Size - 5 x 5 (1-5/8 Slot Width)

Item #: MA5342975
Manufacturer: Precision Brand
Mfg #: 42975

Technical Specifications:
*Brand Name: Precision Brand *Material: Stainless Steel *Package Quantity: 10 ea. size *Size: 5 x 5 *Slot Width: 1-5/8 *Style: Shop Kit *Thickness: .001 to .075 *Type: Slotted Shim Sets-10 pcs Each Size

Description:
*300 Series Stainless Steel Slotted Shim *Slotted Shim is the bestway to solve alignment and leveling problemson motors, pumps, generators and otherplant machinery *300 Series Stainless resists rust and corrosion *Tab and hole in tab makes shim placement and removal easier and safer, it also eliminates the need to place hands under machinery *Each shim marked with thickness in decimal and/or metric

Shipping Info:
*Actual Weight - 9.8800 *Dimensions - Height: 4.45 Length: 7.00 Width: 6.00