656-211JN/S DIAL INDICATOR

Item #: MV7053753
Manufacturer: Starrett
Mfg #: 53753

Technical Specifications:
•Brand Name: Starrett •Model Number: 656-211JN/S

Description:

Shipping Info:
•Actual Weight - 1.2000

$485.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HAZ58 5GAL CLEANER & DEGREASER

Item #: LK70M05135
Manufacturer: Ashburn
Mfg #: M-05135

Technical Specifications:
•Brand Name: Ashburn •Hazard Code: HAZ58 •Size: 5 Gallon

Description:

Shipping Info:
•HAZ 58 •UPS Ground - No Additional Shipping Charges •UPS Air-No Additional Shipping Charges •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 40.0000 •Dimensions - Height: 11.0 Length: 13.5 Width: 11.0 •Addl Fee Under 70lb - $14.25 per item

$325.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

6" 400G BRISTLE BRUSH REPL REFILL

Item #: TM3033058
Manufacturer: 3M
Mfg #: 0004801133

Technical Specifications:

Description:

Shipping Info:
*Actual Weight - 2.3150

$419.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#EC799A-12/300 - 0-12" / 0-300mm Electronic Caliper-No SPC Output

Item #: MV7000148
Manufacturer: Starrett
Mfg #: 00148

Technical Specifications:
•Brand Name: Starrett •Comments: No Output •Hazard Code: HAZ05 •Measuring Range: 0 - 12 / 0 - 300mm •Model Number: EC799A-12/300 •Resolution: .0005" / 0.01mm •Type: Electronic Caliper

Description:
•Resolution .0005" / 0.01mm •Lightweight, ergonomic design •Zero at any position •Automatic shut-off after 30 minutes of non-use •Last measuring position retained when shut off •Hardened stainless steel body •Integrated depth rod on all sizes •Lock screw and fine adjustment thumb wheel •With case

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 1.9500 •Dimensions - Height: 1.60 Length: 17.2 Width: 5.90 •Additional handling -$15.00 per item

$485.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

656-111JN/S DIAL INDICATOR

Item #: MV7053721
Manufacturer: Starrett
Mfg #: 53721

Technical Specifications:
•Brand Name: Starrett •Model Number: 656-111JN/S

Description:

Shipping Info:
•Actual Weight - 1.2000

$485.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

6" 220G BRISTLE BRUSH REPL REFILL

Item #: TM3033057
Manufacturer: 3M
Mfg #: 0004801133

Technical Specifications:

Description:

Shipping Info:
*Actual Weight - 2.2750

$419.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8 x 1-1/2 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369562
Manufacturer: Starrett
Mfg #: 69562

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 5/8 *Width: 1-1/2

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 9.5600

$508.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100 1/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100256309
Manufacturer: Parlec
Mfg #: H100A-25SF

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-25SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$455.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

AK300.7.100.105.20.HSK COLLET CHUCK

Item #: WC145043235
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
*Actual Weight - 10.7393

$490.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ER11 7PC COLLET SET 3.9 -7.0MM

Item #: GM72500273
Manufacturer: Lyndex
Mfg #: E11-7S(C)

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$542.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100 5/16 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100316309
Manufacturer: Parlec
Mfg #: H100A-31SF

Technical Specifications:
*Bore Diameter: 5/16 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-31SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$455.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

2.1875" For 1.968 - 2.362" / 50 - 60mm - Master Setting Ring

Item #: GG4521451
Manufacturer: Flexbar
Mfg #: 21451

Technical Specifications:
•Brand Name: Flexbar •For Use With: 1.968-2.362'' / 50-60mm •Model Number: 21451 •Size: 2.1875 •Total Range: 2.1875" •Type: Master Setting Ring Bilateral Class Z Steel

Description:
•Master setting ring bilateral class Z steel

Shipping Info:
•Actual Weight - 1.0000

$455.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100 5/8 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100626309
Manufacturer: Parlec
Mfg #: H100A-62SF

Technical Specifications:
*Bore Diameter: 5/8 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-62SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$455.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

A101M.0.63.080.63 NCT EXTENSION

Item #: WC145007347
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
*Actual Weight - 3.9600

$490.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100 3/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100756309
Manufacturer: Parlec
Mfg #: H100A-75SF

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-75SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$455.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100 3/8 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100386309
Manufacturer: Parlec
Mfg #: H100A-38SF

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-38SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$455.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

AK300.7.100.100.20.HSK COLLET CHUCK

Item #: WC145043229
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
*Actual Weight - 10.8213

$490.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100 1/2 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100506309
Manufacturer: Parlec
Mfg #: H100A-50SF

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-50SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$455.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 SK6 SLIM CHUCK HIGH SPEED

Item #: GM75T40SK6150UP
Manufacturer: Lyndex
Mfg #: CAT40-SK6-

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$478.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100A 1/4 SHRINK FIT HOLDER

Item #: GM76500683
Manufacturer: Lyndex
Mfg #: H100A-SF02

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$512.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It