Products

• Utility Utility Cart: 25" Long, 25" Wide, 600 lb Capacity, Carmine Red
• Micro Drill Bit: 1.59 mm Dia, (0.0625"), 140 deg, Solid Carbide
• Screw Machine Length Drill Bit: 0.082″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 206
• Single Angle Collets; Collet Series: SK25; Type: Slim Chuck; Collet Size (mm): 20.00
• Single Angle Collets; Collet Series: SK25; Type: Slim Chuck; Collet Size (mm): 19.50
• Open End Wrench: 4.5 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Single Angle Collets; Collet Series: SK6; Type: Slim Chuck; Collet Size (mm): 5.50
• Open End Wrench: 4 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Abrasive Belt: 1/2" Wide, 12" OAL, 180 Grit, Aluminum Oxide
• Open End Wrench: 6 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Single Angle Collets; Collet Series: SK25; Type: Slim Chuck; Collet Size (Decimal Inch): 1.0000
• Single Angle Collets; Collet Series: SK16; Type: Slim Chuck; Collet Size (mm): 12.50
• Screw Machine Length Drill Bit: 0.1094″ Dia, 135 °, Cobalt TiCN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 2175N
• Lever Locksets; Lockset Type: Entrance; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Less Core; Material: Metal; Door Thickness: 1-3/8 to 2; Finish: Satin Chrome
• Chucking Reamer: Letter D, 6" OAL, 1-1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Compression Tube 90 deg Elbow: 1/8-28, M12x1.5, 6" Tube ID, 6 mm Tube OD, Tube OD x Tube ID
• Square End Mill: 4 Flute, Solid Carbide
• TCGT1.81.50LFX-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0039″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• TCGT21.50RFX-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• Turning Insert: NP-TPGB321-GS3 BC8210, Cubic Boron Nitride (CBN)
• Milling Insert: WK10, Solid Carbide N/A Finish, 1/8″ Insert Thick,
• TCGT1.81.50RFX-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0039″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• Timing Belt Pulleys; Pulley Type: Hub w/No Flanges; Number of Teeth: 22; Outside Diameter (Decimal Inch): 1.3340; Belt Width: 9.0 mm; 9.0 in; 9.0 cm; Material: Aluminum; Pitch Diameter: 1.379 mm; 1.379 in; Face Width: 0.546 in; 0.546 mm; Minimum Order Qua
• TCGT1.81.50.5RFX Carbide Turning Insert Absotech Bronze Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• TCGT1.81.50RFX-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0039″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• Chucking Reamer: 0.2490" Dia, 6" OAL, 1-1/2" Flute Length, Straight-Cylindrical Shank, HSS
• TCGT21.50LFX-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• TCGT1.81.50.5LFX Carbide Turning Insert Absotech Bronze Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• TCGT1.81.50.5RFX Carbide Turning Insert Absotech Bronze Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• TCGT21.50.5RFY-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• TCGT1.81.50RFY-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0039″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• TCGT21.50.5RFX-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, 60° Included Angle, Series AC5000S
• Jobber Length Drill Bit: 0.0268″ Dia, 118 °, High Speed Steel TiN Finish, 1.1024″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.0118″ Dia, 118 °, High Speed Steel TiN Finish, Right Hand Cut, Spiral Flute
• Pliers; Jaw Texture: Serrated; Plier Type: Combination
• Cut, Puncture & Abrasion-Resistant Gloves: Helix Helix, Size 2X-Large, ANSI Cut A9, ANSI Puncture 4, Nitrile, HPPE Blend
• Impact Socket: 1/2″ Drive 6-Point
• Milling Inserts; Insert Style: SEKT; Insert Size: 1204; Insert Material: Solid Carbide; Width (Inch): 1/2; Manufacturer Grade: YG2002; Length (Inch): 1/2; Thickness Range (Decimal Inch): 0.1850 to 0.2000; Corner Radius (Decimal Inch): 0.0430; Series: SEKT
• Milling Inserts; Insert Style: SEKT; Insert Size: 12T3; Insert Material: Solid Carbide; Manufacturer Grade: YG2002; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Corner Radius (Decimal Inch): 0.0590; Series: SEKT; Cutting Direction: Neutral; Coating/F
• Turning Insert: TCGT21.51MESI AC5005S, Solid Carbide Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Series AC5005S
• Micro Drill Bit: 1.40 mm Dia, (0.0550"),#54 (0.0550"), 140 deg, Solid Carbide
• 4.5mm x 10' Buna-N Round Cord Stock 250°F Max, Shore 90A, 2,000 psi Tensile Strength, Black
• Film Tape: 1″ Wide, 36 yd Long, 9 mil Thick, White Polypropylene Film, Silicone Adhesive, 22 lb/in Tensile Strength
• Combination Drill & Thread Mills; Thread Size: #8-32; Drill Size (mm): 3.200; Finish Coating: AlTiN; Tool Material: Carbide
• O-Ring: 13.5 mm ID x 17.5 mm OD, 2 mm Thick, Nitrile Butadiene Rubber Round Cross Section
• O-Ring: 0.426″ ID x 0.566″ OD, 0.07″ Thick, Dash 013, Nitrile Butadiene Rubber Round Cross Section
• Corner Chamfer End Mill: 6.00 mm Dia, 24.00 mm LOC, 3 Flute, 0.15 mm Chamfer Width, Solid Carbide
• O-Ring: 5-1/4″ ID x 5-5/8″ OD, 3/16″ Thick, Dash 355, HNBR Round Cross Section
• O-Ring: 5-1/8″ ID x 5-1/8″ OD, 3/16″ Thick, Dash 354, HNBR Round Cross Section
• TPMT221EGU AC8015P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, 60° Included Angle, Series AC8000P
• O-Ring: 1″ ID x 1-1/4″ OD, 1/8″ Thick, Dash 214, HNBR Round Cross Section
• TPMT181505ELU AC8025P Carbide Turning Insert Absotech Finish, 9.6mm Long, 5.56mm Inscribed Circle, 0.2mm Corner Radius, 2.38mm Thick, 60° Included Angle, Series AC8000P
• TPMT222EGU AC8015P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, 60° Included Angle, Series AC8000P
• Press Fit Headed Drill Bushing: Type H, O ID, 1/2″ OD
• TPMT222EGU AC8035P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, 60° Included Angle, Series AC8000P
• Press Fit Headed Drill Bushing: Type H, #3 ID, 3/8″ OD
• TPMT221EGU AC8035P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, 60° Included Angle, Series AC8000P
• Press Fit Headed Drill Bushing: Type H, #27 ID, 5/16″ OD
• Press Fit Headed Drill Bushing: Type H, #12 ID, 1/2″ OD
• TPMT222EGU AC8025P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, 60° Included Angle, Series AC8000P
• Press Fit Headed Drill Bushing: Type H, G ID, 1/2″ OD
• TPMT222EMU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, Series AC8020P
• Press Fit Headed Drill Bushing: Type H, 3/16″ ID, 1/2″ OD
• TPMT221EMU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, Series AC8020P
• Press Fit Headed Drill Bushing: Type H, 11/64″ ID, 5/16″ OD
• TPMT220.5ELB AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.1252″ Thick, Series AC8020P
• Press Fit Headed Drill Bushing: Type H, 15/64″ ID, 7/16″ OD
• TPMT221ELB AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, Series AC8020P
• TPMT181505ELB AC8020P Carbide Turning Insert Absotech Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, Series AC8020P
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.5214; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• TPMT1.81.51ELB AC8020P Carbide Turning Insert Absotech Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick, Series AC8020P
• Transparent Double-Sided Foam Tape: 1/2″ Wide, 5 yd Long, 40 mil Thick, Acrylic Adhesive
• TPMT222ELB AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, Series AC8020P
• FlexC 80 Quick-Change Collet 72mm Round Smooth
• TPMT21.52ESU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.0937″ Thick, Series AC8020P
• TPMT21.51ESU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick, Series AC8020P
• TPMT181505ESU AC8020P Carbide Turning Insert Absotech Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, Series AC8020P
• TPMT21.50.5ESU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, Series AC8020P
• TPMT1.81.51ESU AC8020P Carbide Turning Insert Absotech Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick, Series AC8020P
• Jobber Length Drill Bit: 0.339″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.4219″ Dia, 135 °, Cobalt Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• TPMT221ELU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, Series AC8020P
• TPMT222ELU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, Series AC8020P
• TPMT181505ELU AC8020P Carbide Turning Insert Absotech Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, Series AC8020P
• TPMT1.81.51ELU AC8020P Carbide Turning Insert Absotech Finish, 0.378″ Long, 0.2189″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick, Series AC8020P
• Turning Insert: CPMT21.50.5PSF AH725, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CPMT
• TPMT220.5ESU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.1252″ Thick, Series AC8020P
• TPMT221ESU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, Series AC8020P
• DCMT 21.51 Carbide Turning Insert 0.015″ Corner Radius
• TPMT222ESU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, Series AC8020P
• TPMT221EGU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, Series AC8020P
• TPMT222EGU AC8020P Carbide Turning Insert Absotech Finish, 0.4331″ Long, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, Series AC8020P
• Socket Extension Set: 3/8" & 1/2" Drive, 10 Pc
• Turning Insert: CNMG432ESX T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: SCMT21.51-24 T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 90.0 &deg N/A Square, Series SCMT
• Turning Insert: TPMT110304-PF GH730, Solid Carbide TiCNO Finish, Neutral, 60.0 &deg N/A Triangle, Series TPMT
• Turning Insert: TPMT222PS GH730, Solid Carbide TiCNO Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• Turning Insert: TPMT221PS GH730, Solid Carbide TiCNO Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• Turning Insert: DCMT11T304-UG YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.4410″ Long, 3/8″ Inscribed Circle, N/A Series DCMT
• Turning Insert: TPMT221PM GH730, Solid Carbide TiCNO Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• Turning Insert: DCMT11T304-UG YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.4410″ Long, 3/8″ Inscribed Circle, N/A Series DCMT
• Barrier Rope & Chain; Type: Safety Chain; Snap End Material: Polyethylene, Plastic; Hook Fitting Material: Plastic; Color: Safety Green; Link Type: Straight Link; Rope/ Chain Material: Polyethylene, Plastic
• Turning Insert: TPMT220.5PSF AH725, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• Turning Insert: TPMT222PSS AH725, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• Lever Locksets; Lockset Type: Grade 1 Classroom Cylindrical Lock ; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Less Core; Material: Stainless Steel; Door Thickness: 1-3/4 to 2; Finish: Satin Chrome
• Turning Insert: TPMT221PSF AH725, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• Turning Insert: TPMT221PM AH725, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• 8600-12-8900 EXIT DEV GLS BEAD SHIM KIT
• Lever Locksets; Lockset Type: Grade 1 Storeroom Cylindrical Lock; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: LFIC Prep; Material: Stainless Steel; Door Thickness: 1-3/4 to 2; Finish: Satin Chrome
• Turning Insert: TPMT221PSS AH725, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• Lever Locksets; Lockset Type: Grade 1 Fail Secure Mortise Lock ; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Conventional; Material: Cold Rolled Steel; Door Thickness: 1-3/4; Finish: Satin Chrome
• Turning Insert: TPMN221 T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMN
• Lever Locksets; Lockset Type: Grade 1 Storeroom Mortise Lock ; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Conventional; Material: Cold Rolled Steel; Door Thickness: 1-3/4; Finish: Satin Chrome
• Turning Insert: DCMT11T308-UG YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.4410″ Long, 3/8″ Inscribed Circle, N/A Series DCMT
• Turning Insert: TPMT331ELB T2500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series T2500Z
• Vertical Bars; Type: Concealed Vertical Rod Exit Device; Rating: Panic Rated; Hand: Left Hand Reverse; Minimum Door Width: 30; Maximum Door Width: 36.000; Grade: 1; Material: Stainless Steel
• Turning Insert: TPMT331EGU T1500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series T1500Z
• Open End Wrench: Single End Head, 22 mm 15 ° Head Angle, Vanadium Steel, Manganese Phosphate Finish
• Turning Insert: TPMT332EGU T1500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series T1500Z
• Turning Insert: WNMG432ESEW T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Hydraulic Tool Chuck: HSK63A Taper Shank, 14.00 mm Hole
• Turning Insert: CNMG4305ESU T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG4305ELU T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: WNMG431ESEW T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: CNMG432EFL T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: WNMG432EFL T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: WNMG431EFL T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: TPMT332ESU T2500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series T2500Z
• Turning Insert: TPMT331ESU T2500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series T2500Z
• Turning Insert: WNMG431EFE T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Jobber Length Drill Bit: 0.4063″ Dia, 135 °, Cobalt Bright/Uncoated, 5.25″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: WNMG432EFE T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Panel Meters; Panel Meter Type: Panel Meter; Power Measurement Type: Hour Meter; Panel Meter Display Type: Digital LCD; Maximum Input Voltage: 27
• Straight Flutes Tap: Metric Coarse, 4 Flutes, Taper, 6H, High Speed Steel, TiN Finish 1″ Thread Length, 2-1/2″ OAL, Right Hand, D5, Series 757
• Turning Insert: CNMG433EFE T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Straight Flutes Tap: 7/16-14, UNC, 4 Flutes, Plug, 2B & 3B, High Speed Steel, Bright/Uncoated 1-7/16″ Thread Length, Right Hand, H3, Series 725
• Turning Insert: CNMG432EFE T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Milling Insert: RDHX 0501M0FN H216T, H216T, Solid Carbide N/A Finish,
• Turning Insert: WNMG433ESU T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Square End Mill: 0.1094'' Dia, 3/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: CNMG431EFL T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG432ELUW T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: WNMG432ELUW T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: WNMG431ELUW T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: CNMG431ELUW T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG431ESU T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG432ESE T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• Turning Insert: CNMG4305ELU T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• O-Ring: 1.6″ ID x 1.56″ OD, 1/4″ Thick, Viton Round Cross Section
• Turning Insert: CNMG4305ESU T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• O-Ring: 5-3/8″ ID x 5-3/4″ OD, 3/16″ Thick, Dash 356, HNBR Round Cross Section
• Turning Insert: WNMG431ESE T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• 1/4″ Head Diam, 1/4″ Shank Diam, 6 Flute 120° High Speed Steel Countersink Bright Finish, 2″ OAL, 0.06″ Nose Diam, Single End, Straight Shank, Right Hand Cut
• Turning Insert: WNMG4305EFA T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: WNMG432EFA T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: WNMG431EFA T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: WNMG432ESE T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: CNMG431EFA T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG432EFA T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG4305EFA T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG432EGU T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG433ELUW T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: WNMG432ESU T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: WNMG431ESU T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: CNMG431EFE T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Ratchets; Tool Type: Reversible Ratchet, Ratchet Handle; Drive Size: 1/2; Head Shape: Pear; Head Style: Reversible; Material: Beryllium Copper
• Turning Insert: CNMG432ESU T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG432EFB T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG433ESU T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Ball End Mill: 0.0625″ Dia, 0.125″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Jobber Length Drill Bit: 0.096″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.098″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: CNMG431EFB T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Ball End Mill: 0.0625″ Dia, 0.125″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Turning Insert: WNMG4305EFE T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: CNMG4305EFB T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Spiral Point Tap: #6-32, UNC, 2 Flutes, Plug, 2B, High Speed Steel, Black Oxide Finish 11/16″ Thread Length, 2″ OAL, Right Hand, H3, Series SPGP
• Spiral Point Tap: #6-32, UNC, 2 Flutes, Plug, 2B, High Speed Steel, Black Oxide Finish 11/16″ Thread Length, 2″ OAL, Right Hand, H2, Series SPGP
• Turning Insert: WNMG431EFB T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Spiral Point Tap: #8-32, UNC, 2 Flutes, Plug, 2B, High Speed Steel, Black Oxide Finish 3/4″ Thread Length, 2-1/8″ OAL, Right Hand, H2, Series SPGP
• Turning Insert: WNMG4305EFB T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: CNMG431ELU T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: CNMG433ELU T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: WNMG432ELU T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: CNMG432ELU T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Turning Insert: WNMG431ELU T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: WNMG4305EFB T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: WNMG432EFB T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: WNMG431EFB T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: WNMG431EFE T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: WNMG4305EFE T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: WNMG433EFE T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: WNMG432EFE T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: CNMG4305EFB T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• Turning Insert: CNMG431EFB T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• Turning Insert: CNMG432EFB T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• Chucking Reamer: 1/4" Dia, 6" OAL, 1-1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Turning Insert: WNMG431ESX T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: WNMG431EGU T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: TPMT332EFB T2500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series T2500Z
• Turning Insert: TPMT331EFB T2500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series T2500Z
• Impact Socket: 3/8″ Drive 6-Point
• Duct Tape: 3/4″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Turning Insert: CNMG4305EFE T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• Duct Tape: 3/4″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Duct Tape: 3/4″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Turning Insert: CNMG431ESX T2500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T2500Z
• Duct Tape: 3/4″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Turning Insert: CNMG431EFE T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• Turning Insert: CNMG432EFE T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• Turning Insert: CNMG433EFE T1500Z, Cermet AlN Finish, Neutral, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series T1500Z
• Turning Insert: WNMG432ESX T2500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T2500Z
• Turning Insert: WNMG432EGU T1500Z, Cermet AlN Finish, Neutral, 0.3425″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series T1500Z
• Turning Insert: TPMT331ELB T1500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series T1500Z
• Turning Insert: TPMT332ELB T1500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series T1500Z
• Turning Insert: TPMT332EGU T2500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series T2500Z
• Turning Insert: TPMT331EGU T2500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series T2500Z
• Turning Insert: TPMR 09 02 08 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMR
• Turning Insert: TPMT331EFB T1500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series T1500Z
• Turning Insert: TPMR 09 02 04 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMR
• Turning Insert: TPMT332EFB T1500Z, Cermet AlN Finish, Neutral, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series T1500Z
• CCMT32.52EGU AC8015P Carbide Turning Insert Absotech Finish, 0.3819″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1563″ Thick, 80° Included Angle, Series AC8000P
• CCMT32.52EGU AC8025P Carbide Turning Insert Absotech Finish, 0.3819″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1563″ Thick, 80° Included Angle, Series AC8000P
• Turning Insert: TPMT222PM AH725, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• Catches; Type: Magnetic Catch; Length (mm): 39.00; Height (mm): 7.0000; Width (mm): 11.00; Finish/Coating: Plain; Magnetic Force: 16.5; Minimum Order Quantity: Stainless Steel; Material: Stainless Steel; Material: Stainless Steel
• Suction & Discharge Hose Couplings; Type: Socket Weld; Coupling Type: Cam & Groove; Coupling Descriptor: Adapter Socket Weld to Sch. 40 Pipe; Material: Stainless Steel; Coupler Size (Fractional Inch): 4; Thread Size: Non-Threaded; Hose Size: 4
• Milling Insert: XDKT 070308SR-M50 CTPM240, CTPM240, Solid Carbide N/A Finish,
• Abrasive Belt: 4" Wide, 90" OAL, Aluminum Oxide
• Boring Bar: 9/64" Min Bore Dia, 0.4000" Max Bore Depth, Right Hand, 3/16" Shank Dia, Micrograin Solid Carbide
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 1″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 1″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 1″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, D11, Series SFGP+5
• O-Ring: 2-3/4″ ID x 2-15/16″ OD, 3/32″ Thick, Dash 148, HNBR Round Cross Section
• O-Ring: 2-7/8″ ID x 3-1/4″ OD, 3/16″ Thick, Dash 336, HNBR Round Cross Section
• O-Ring: 6-3/4″ ID x 7″ OD, 1/8″ Thick, Dash 261, HNBR Round Cross Section
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6750; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Plastic Rod: 24" Long, 0.8750" Dia, Yellow, Opaque, 10000 psi Tensile Strength
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.7893; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• AOET11T310PEFR-S H20 Carbide Milling Insert Uncoated, 3.6mm Thick x 12.8mm Wide
• AOET11T324PEFR-S H20 Carbide Milling Insert Uncoated, 3.6mm Thick x 12.8mm Wide
• Safety Glasses: Anti-Fog & Anti-Scratch, Polyurethane, Clear Lenses, Wrap Around
• HM90APKT100304PDR28 Carbide Milling Insert Uncoated, 0.404″ Long x 0.139″ Thick x 0.2661″ Wide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8108; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6484; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.7247; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Milling Insert: SFKT 0903AFSR-M50 CTPM225, CTPM225, Solid Carbide N/A Finish,
• Annular Cutter Set: 7 Pc, 5/16 to 3/4" Dia, 1/4" Depth of Cut, Steel
• Ball End Mill: 6.00 mm Dia, 4.00 mm LOC, 2 Flute, Solid Carbide
• Milling Insert: SDNT 09T308SR-29 CTCP230, CTCP230, Solid Carbide N/A Finish,
• Grooving Tool: Interior, Left Hand, 5/16" Shank Dia