Products

• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Boring Bar: 0.08″ Min Bore, 13/64″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• Boring Bar: 4.5 mm Min Bore, 22.5 mm Max Depth, Right Hand Cut, Carbide 4.50 mm Shank Dia, 51.10 mm OAL, 0.08 mm Corner Radius
• Corner Radius End Mill: 0.1575″ Dia, 0.315″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Bar: 0.1″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• Boring Bar: 4.5 mm Min Bore, 22.5 mm Max Depth, Right Hand Cut, Carbide 4.50 mm Shank Dia, 51.10 mm OAL, 0.15 mm Corner Radius
• Milling Insert: SNHU 09T312SR-M50 CTPM240, CTPM240, Solid Carbide N/A Finish,
• Boring Bar: 4.5 mm Min Bore, 22.5 mm Max Depth, Right Hand Cut, Carbide 4.50 mm Shank Dia, 51.10 mm OAL, 0.05 mm Corner Radius
• Paint Pen Marker: Black Fine Tip
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Milling Insert: SNHU 09T316SR-R50 CTCK215, CTCK215, Solid Carbide N/A Finish,
• Boring Bar: 4.5 mm Min Bore, 22.5 mm Max Depth, Right Hand Cut, Carbide 4.50 mm Shank Dia, 51.10 mm OAL, 0.15 mm Corner Radius
• Boring Bar: 0.08″ Min Bore, 0.15″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• Glass Cloth Tape; Width (Inch): 3/4; Material Type: PTFE; Color: Light Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 6.8000; Tensile Strength (Lb./Inch): 290.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temp
• Compression Spring: 0.823″ OD, 6.75″ Free Length 0.105″ Wire Dia, 41.357 lb Max Load, 14.941 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 2.5″ Free Length 0.177″ Wire Dia, 104.178 lb Max Load, 130.203 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.821″ OD, 5.75″ Free Length 0.207″ Wire Dia, 165.716 lb Max Load, 60.889 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.88″ OD, 4.25″ Free Length 0.148″ Wire Dia, 47.546 lb Max Load, 20.712 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.998″ OD, 4.75″ Free Length 0.225″ Wire Dia, 191.342 lb Max Load, 86.939 lb/in Spring Rate, Music Wire
• Tap Sets; Overall Length (Decimal Inch): 2.5000; Overall Length (Inch): 2-1/2
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• White Double-Sided Polyethylene Foam Tape: 4″ Wide, 7 yd Long, 31 mil Thick, Acrylic Adhesive
• Compression Spring: 1.88″ OD, 4.75″ Free Length 0.225″ Wire Dia, 202.501 lb Max Load, 97.93 lb/in Spring Rate, Music Wire
• Compression Spring: 1.293″ OD, 4.5″ Free Length 0.207″ Wire Dia, 162.378 lb Max Load, 147.453 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.939″ OD, 4.75″ Free Length 0.225″ Wire Dia, 196.767 lb Max Load, 92.119 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.82″ OD, 5″ Free Length 0.225″ Wire Dia, 138.001 lb Max Load, 46.108 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Socket-Mount Leveling Pads & Mounts; Leveling Mount Type: Studded; Thread Size: M20; Base Diameter (Inch): 2-61/64; Load Capacity (Lb.): 1938.000; Load Capacity: 1938.0; 880.0; Load Capacity (kg): 880.00; Overall Length (Inch): 7-1/8; Overall Length (Deci
• 10mm x 25' Buna-N Round Cord Stock 250°F Max, Shore 70A, 2,050 psi Tensile Strength, Black
• Square End Mill: 5/8'' Dia, 3/4'' LOC, 5/8'' Shank Dia, 3-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Black Double-Sided Urethane Foam Tape: 3/4″ Wide, 5 yd Long, 31 mil Thick, Acrylic Adhesive
• Ball End Mill: 0.5″ Dia, 2 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, ZrN Coated, Single End, Series 2014
• Square End Mill: 5/16'' Dia, 1/2'' LOC, 5/16'' Shank Dia, 2'' OAL, 5 Flutes, Solid Carbide AlTiN Finish, 45 ° Helix, Centercutting, Series SM5F-NB
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Compression Spring: 0.999″ OD, 2.25″ Free Length 0.177″ Wire Dia, 136.296 lb Max Load, 306.415 lb/in Spring Rate, Stainless Steel
• Turning Insert: 2QP-CNGM433HM BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGM
• Compression Spring: 1.821″ OD, 2.75″ Free Length 193.546 lb Max Load, 266.601 lb/in Spring Rate, Stainless Steel
• Tap Sets; Overall Length (Decimal Inch): 2.5000; Overall Length (Inch): 2-1/2
• Jobber Length Drill Bit: 0.0827″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Padlock: Steel, Keyed Different, 2″ Wide, Chrome-Plated 3/8″ Shackle Dia, 3/8″ Shackle Width, 1-1/2″ Shackle Height
• Spiral Flute Tap: M3 x 0.50, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, PM-HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D3 & D4, Series 4634
• Duct Tape: 3/4″ Wide, 15 mil Thick, Aluminum Foil Acrylic Adhesive, 126 lb/in Tensile Strength
• Spiral Flute Tap: M3 x 0.50, Metric, 3 Flute, Semi-Bottoming, 6GX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4625
• Jobber Length Drill Bit: 0.0748″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute
• Compression Spring: 0.764″ OD, 3.5″ Free Length 0.148″ Wire Dia, 108.365 lb Max Load, 164.622 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.41″ OD, 8.5″ Free Length 0.125″ Wire Dia, 39.821 lb Max Load, 8.778 lb/in Spring Rate, Stainless Steel
• Turning Insert: CNMM 16 06 12-WR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series CNMM-WR
• Grooving Insert: GCM2002ML AC530U, Solid Carbide Super ZX Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Turning Insert: CNMM 16 06 16-WR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series CNMM-WR
• Grooving Insert: GCM150005GF AC530U, Solid Carbide Super ZX Finish, Neutral, 1.5 mm Cutting Width, 16 mm Max Depth, Series GND
• Compression Spring: 2.761″ OD, 9″ Free Length 131.214 lb Max Load, 32.767 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GCM2002ML AC520U, Solid Carbide Super ZX Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GCM2010RN AC520U, Solid Carbide Super ZX Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Combo Drill & Countersink: Metric, Cobalt Bright (Polished) Finish
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Left Hand Cut, Series 582
• Grooving Insert: GCM2002CG AC520U, Solid Carbide Super ZX Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Combo Drill & Countersink: Metric, High Speed Steel TiN Finish, Right Hand Cut, Series 613
• Clear Double-Sided Acrylic Tape: 1″ Wide, 1 yd Long, 40 mil Thick, Acrylic Adhesive
• Grooving Insert: GCM125005GF AC530U, Solid Carbide Super ZX Finish, Neutral, 1.25 mm Cutting Width, 16 mm Max Depth, Series GND
• Grooving Insert: TQISS TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.079″ Cutting Width, Series TQIS 14
• Grooving Insert: GCM2002GF AC530U, Solid Carbide Super ZX Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Clear Double-Sided Acrylic Tape: 1″ Wide, 40 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 3/16″ Dia, 15/16″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Grooving Insert: GCM2010RN AC530U, Solid Carbide Super ZX Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: TQISS TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.098″ Cutting Width, Series TQIS 14
• Corner Radius End Mill: 3/16″ Dia, 15/16″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Jobber Length Drill Bit: 0.332″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: GCM2002CG AC830P, Solid Carbide Super FF Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: TQISS TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.079″ Cutting Width, Series TQIS 14
• Grooving Insert: GCM2002CG AC520U, Solid Carbide Super ZX Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002GG AC520U, Solid Carbide Super ZX Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, ZrN Finish Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Ball End Mill: 0.4724″ Dia, 1.0236″ LOC, 2 Flute, Solid Carbide Uncoated
• Grooving Insert: GCM2094GL AC830P, Solid Carbide Super FF Finish, Neutral, 0.094″ Cutting Width, 0.709″ Max Depth, Series GND
• Grooving Insert: GCM2002GL AC520U, Solid Carbide Super ZX Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 2.291″ OD, 7″ Free Length 0.225″ Wire Dia, 168.233 lb Max Load, 46.154 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• 90° 3.5039″ Diam 1-1/2″ OAL 2-Flute Solid Carbide Spotting Drill AlTiN Finish, 0.03″ Flute Length, 1/8″ Shank Diam
• Combo Drill & Countersink: #3, 1/4″ Body Dia, 118 ™, Solid Carbide Bright/Uncoated Finish, 2″ OAL, Right Hand Cut
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Corner Radius End Mill: 0.1562″ Dia, 0.235″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Straight Flutes Tap: 5/8-18, UNF, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, Bright/Uncoated 1-13/16″ Thread Length, 3-13/16″ OAL, Right Hand, H2, Series 725
• Milling Inserts; Insert Style: SNMX; Insert Size: 1206; Insert Material: Solid Carbide; Width (Inch): 1/2; Manufacturer Grade: YG602; Length (Inch): 1/2; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Corner Radius (Inch): 1/32; Series: SNMX; Cutting D
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Straight Flutes Tap: 5/8-11, UNC, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, Bright/Uncoated 1-13/16″ Thread Length, 3-13/16″ OAL, Right Hand, H5, Series 725
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 3/64'' Dia, 0.075'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 11/64'' Dia, 7/8'' LOC, 3/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GCM2002GL AC830P, Solid Carbide Super FF Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002CG AC830P, Solid Carbide Super FF Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Milling Inserts; Insert Style: XB1D; Insert Size: 040; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 1/2; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Series: XB1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals):
• PNEA1106XNTN T01020 Ceramic Milling Insert Si3N4 Finish, 0.6669″ Long x 6.5mm Thick x 16.94mm Wide
• Milling Inserts; Insert Style: XR1D; Insert Size: 04004; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 1/2; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Square End Mill: 5/64'' Dia, 0.117'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Milling Inserts; Insert Style: XR1D; Insert Size: 04002; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 1/2; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Tap Sets; Overall Length (Decimal Inch): 2.8188
• Milling Inserts; Insert Style: XR1D; Insert Size: 04001; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 1/2; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, 2B/3B, Powdered Metal, TiCN Finish 3/4″ Thread Length, 2-1/2″ OAL, Right Hand, H3, Series 778
• Corner Radius End Mill: 5/16″ Dia, 0.813″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End
• Milling Inserts; Insert Style: XR1D; Insert Size: 04008; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 1/2; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Square End Mill:
• Ball End Mill: 0.2031″ Dia, 0.312″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Square End Mill: 0.0315'' Dia, 0.0472'' LOC, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Screw Machine Length Drill Bit: 0.3465″ Dia, 118 °, High Speed Steel Oxide Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 223
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Square End Mill: 0.075'' Dia, 0.113'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Chamfer Mill: 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Tap Sets; Overall Length (Decimal Inch): 2.8188
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Square End Mill: 3/32'' Dia, 1/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Chamfer Mills; Cutter Head Diameter (Decimal Inch): 0.2500; Number Of Flutes: 3; End Type: Single; Included Centerline Angle: 45; Included Side Angle: 45; Shank Diameter (Decimal Inch): 0.2500; Shank Diameter (Inch): 1/4; Overall Length (Inch): 2-1/2; Ove
• Grooving Insert: TQISS TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.059″ Cutting Width, Series TQIS 14
• Jobber Length Drill Bit: 0.4844″ Dia, 135 °, Cobalt Bright/Uncoated, 5.875″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: GMM2520TK PR930, Solid Carbide TiCN Finish, Right Hand, 2.5 mm Cutting Width, 17 mm Max Depth, Series KGM
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, AlTiN Coated
• Jobber Length Drill Bit: 0.5″ Dia, 135 °, Cobalt Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Grooving Insert: GMM2020MT PR915, Solid Carbide TiAlN Finish, Neutral, 2 mm Cutting Width, 17 mm Max Depth, Series KGM
• Grooving Insert: GMM2020TK PR930, Solid Carbide TiCN Finish, Neutral, 2 mm Cutting Width, 17 mm Max Depth, Series KGM
• Square End Mill: 1/64'' Dia, 0.045'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Spiral Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Spiral Point Tap: 1/2-20, UNF, 3 Flutes, Plug, 3B, High Speed Steel, Uncoated 1-21/32″ Thread Length, 3-3/8″ OAL, Right Hand, H1, Series 750
• Spiral Point Tap: 1/2-13, UNC, 3 Flutes, Plug, 2B/3B, High Speed Steel, Uncoated 1-21/32″ Thread Length, 3-3/8″ OAL, Right Hand, H2, Series 750
• Jobber Length Drill Bit: 0.1937″ Dia, 130 °, Powdered Metal FIREX Finish, 3.39″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Grooving Insert: GMM2520MT PR915, Solid Carbide TiAlN Finish, Neutral, 2.5 mm Cutting Width, 17 mm Max Depth, Series KGM
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Square End Mill: 15/32'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Screw Machine Length Drill Bit: 0.173″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Chamfer Mill: 2 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Bright/Uncoated
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Duct Tape: 2″ Wide, 3' Long, 3.6 mil Thick, Aluminum Foil Rubber Adhesive, 17 lb/in Tensile Strength
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Chucking Reamer: 0.1575″ Dia, 4″ OAL, 1″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 0.176″ Dia, 0.21″ LOC, 1/32″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End
• Chamfer Mill: 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, AlTiN Coated
• Compression Spring: 0.764″ OD, 6″ Free Length 0.112″ Wire Dia, 52.54 lb Max Load, 25.831 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 37 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 1035
• Compression Spring: 0.823″ OD, 6″ Free Length 0.112″ Wire Dia, 49.119 lb Max Load, 21.896 lb/in Spring Rate, Stainless Steel
• Roughing End Mill 1/4″ 4-FLUTE CRM ROU GHER REG. LGTH. TICN
• Compression Spring: 2.703″ OD, 6.75″ Free Length 0.225″ Wire Dia, 101.707 lb Max Load, 30.858 lb/in Spring Rate, Stainless Steel
• Internal Boring Bar: 0.1575″ Min Bore, 0.4724″ Max Depth, Left Hand Cut, Carbide 1.1811″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.1575″ Min Bore, 0.4724″ Max Depth, Left Hand Cut, Carbide 1.1811″ OAL, 0.0039″ Corner Radius
• Compression Spring: 1.528″ OD, 2.5″ Free Length 0.177″ Wire Dia, 92.973 lb Max Load, 101.425 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.409″ OD, 8″ Free Length 0.192″ Wire Dia, 103.145 lb Max Load, 20.453 lb/in Spring Rate, Music Wire
• Compression Spring: 1.645″ OD, 5.5″ Free Length 0.135″ Wire Dia, 42.251 lb Max Load, 14.017 lb/in Spring Rate, Stainless Steel
• 9' Heavy-Duty Tie Down with S-Hook End Rubber, Black
• Milling Inserts; Insert Style: XRAA; Insert Size: 25010; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XRAA; Coating/Finish: TiAlN; Widt
• Kyocera SPMR 42EDERH PR1225 Grade PVD Carbide, 90 Degree Square, Positive Rake Angle, Right-Hand Milling insert for Roughing in (P) Free-Cutting Steel
• Internal Boring Bar: 0.1575″ Min Bore, 0.4724″ Max Depth, Right Hand Cut, Carbide 1.1811″ OAL, 0.0079″ Corner Radius
• Recessed Pulls; Overall Width (Inch): 5-33/64; Overall Height (mm): 64.00000; Recess Width: 109.00; Recess Height: 34.00; Recess Depth: 11.00; Center to Center: 126.0000; Thread Size: M4; Finish/Coating: Ivory; Material: ABS; Polycarbonate; Material: ABS;
• Milling Inserts; Insert Style: XRAA; Insert Size: 25020; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XRAA; Coating/Finish: TiAlN; Widt
• Internal Boring Bar: 0.1575″ Min Bore, 0.4724″ Max Depth, Right Hand Cut, Carbide 1.1811″ OAL, 0.0039″ Corner Radius
• Square End Mill: 3/8'' Dia, 2-1/2'' LOC, 3/8'' Shank Dia, 6'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Milling Inserts; Insert Style: XR2A; Insert Size: 10008; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR2A; Coating/Finish: H-Coating; Width (Decimal Inch - 4 Dec
• Corner Radius End Mill: 5/16″ Dia, 5/8″ LOC, 0.015″ Radius, 4 Flutes 2-3/16″ OAL, 5/16″ Shank Dia, Variable ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 0.0197″ Radius, 4 Flutes Variable ° Helix, AlTiN Coated, Corner Radius End
• TPGB110304MEF KBN570 CBN Turning Insert Uncoated, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, 60° Triangle, Series KBN
• Milling Inserts; Insert Style: XR1A; Insert Size: 10008; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR1A; Coating/Finish: TiAlN; Width (Decimal Inch - 4 Decimal
• Milling Insert: SDHN1204ZZEN4W, KCK20B, Solid Carbide N/A Finish, 0.5000″ OAW
• TPGB110304T00815ME Honeycomb CBN Turning Insert Megacoat Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, 60° Triangle, Series KBN
• Compression Spring: 2.056″ OD, 8.5″ Free Length 0.207″ Wire Dia, 147.864 lb Max Load, 33.048 lb/in Spring Rate, Music Wire
• Compression Spring: 2.291″ OD, 6.25″ Free Length 0.207″ Wire Dia, 133.439 lb Max Load, 37.243 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XR1A; Insert Size: 10001; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR1A; Coating/Finish: TiAlN; Width (Decimal Inch - 4 Decimal
• TPGB110308T00815ME CBN Turning Insert Megacoat Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, 60° Triangle, Series KBN
• Compression Spring: 1.939″ OD, 6″ Free Length 0.207″ Wire Dia, 156.254 lb Max Load, 51.733 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XR1A; Insert Size: 10002; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR1A; Coating/Finish: TiAlN; Width (Decimal Inch - 4 Decimal
• Compression Spring: 1.939″ OD, 3.75″ Free Length 263.062 lb Max Load, 184.873 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: #10-32, LK, Modified Bottoming, LK Class of Fit, Cobalt, TICN Finish 0.591″ Thread Length, 2.756″ OAL, Right Hand Flute, Right Hand Thread, BT, Series BU459600
• Milling Inserts; Insert Style: XR1A; Insert Size: 10004; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR1A; Coating/Finish: TiAlN; Width (Decimal Inch - 4 Decimal
• Spiral Flute Tap: 3/4-16, UNF, 4 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 2″ Thread Length, 4.25″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Milling Inserts; Insert Style: XR2A; Insert Size: 10002; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR2A; Coating/Finish: H-Coating; Width (Decimal Inch - 4 Dec
• Grooving Insert: FLGCB AH110, Solid Carbide TiAlN Finish, Right Hand, Series FLG
• Spiral Flute Tap: M8 x 1.00, Metric, 3 Flute, Modified Bottoming, VC-10, V Finish Right Hand Flute, Right Hand Thread, D5, Series 351
• Milling Inserts; Insert Style: XR2A; Insert Size: 10001; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR2A; Coating/Finish: H-Coating; Width (Decimal Inch - 4 Dec
• Grooving Insert: FLGCB AH110, Solid Carbide TiAlN Finish, Right Hand, Series FLG
• Milling Inserts; Insert Style: XRAA; Insert Size: 12020; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XRAA; Coating/Finish: TiAlN; Widt
• Boring Bar: 0.065″ Min Bore, 7/16″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Threaded Ring Gage: 1/4-28 Thread, UNF, Class 2A, No Go
• CNMG160612PH CA5515 Carbide Turning Insert TiCl2O3/TiN Finish, Neutral, 5/8″ Inscribed Circle, 0.0472″ Corner Radius, 1/4″ Thick, 80° Diamond, Series CA55
• Corner Radius End Mill: 3/8″ Dia, 0.57″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 0.313'' Dia, 3/4'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 36 ° Variable Helix, Centercutting, RH Cut, RH Flute, Series CoroMill Dura
• Milling Inserts; Insert Style: XB1N; Insert Size: 250; Insert Material: Solid Carbide; Material Grade: Micro Fine; Corner Radius (mm): 12.50; Length Range (Decimal Inch): 0.7000 to 0.9000; Thickness (mm): 6.20; Width (Mm - 2 Decimals): 6.20; Length (Decim
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Kyocera CNMG 544PT CA5525 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel
• Chamfer Mill: 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, Bright/Uncoated
• Threaded Ring Gage: 1/4-28 Thread, UNF, Class 2A, Go
• Ball End Mill: 0.1875″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 1/32″ Dia, 1/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Milling Inserts; Insert Style: XB1A; Insert Size: 100; Insert Material: Solid Carbide; Material Grade: Micro Fine; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Corner Radius (Inch): 1/2; Thickness (Decimal Inch - 4 Decimals): 0.24
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 0.57″ LOC, 0.05″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Press Fit Headed Drill Bushing: Type H, 17/64″ ID, 7/16″ OD 3/8″ Length Under Head, Steel
• Corner Radius End Mill: 3/8″ Dia, 0.57″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.015″ Dia, 0.022″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• RNGN090400S02025 Ceramic Turning Insert Al2O3/TiC Finish, Neutral, 3/8″ Inscribed Circle, 0″ Corner Radius, 0.1874″ Thick, Round
• Chucking Reamer: 0.144″ Dia, 3″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• 1/16″ Diam 270° Wrap Angle 0.0529″ LOC 2-Flute AlTiN Finish Undercut End Mill 1/8″ Shank Diam, 1-1/2″ OAL, 0.0313″ Radius, Solid Carbide
• Milling Inserts; Insert Style: XR2A; Insert Size: 10004; Insert Material: Solid Carbide; Material Grade: Micro Fine; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Corner Radius (Inch): 1/16; Thickness (Decimal Inch - 4 Decimals): 0
• Kyocera CNMG 543 CA5525 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Roughing in (P) Carbon/Alloy Steel
• Milling Inserts; Insert Style: XB2C; Insert Size: 100; Insert Material: Solid Carbide; Material Grade: Micro Fine; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Corner Radius (Inch): 1/2; Series: XB2C; Coating/Finish: H-Coating; Wi
• 1/16″ Diam 270° Wrap Angle 0.053″ LOC 2-Flute AlTiN Finish Undercut End Mill 1/8″ Shank Diam, 1-1/2″ OAL, 0.031″ Radius, Solid Carbide
• Open End Wrench: Single End Head, 25 mm 15 ° Head Angle, Vanadium Steel, Manganese Phosphate Finish
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Milling Insert: RDHX0702M0SLN, KCKP10, Solid Carbide N/A Finish,
• Ball End Mill: 0.01″ Dia, 0.015″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Jobber Length Drill Bit: 0.1272″ Dia, 130 °, Vanadium High Speed Steel TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Chucking Reamer: 0.136″ Dia, 3″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Chucking Reamer: 0.2539″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.157″ Dia, 3″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Corner Radius End Mill: 0.1562″ Dia, 0.469″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 42 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Jobber Length Drill Bit: 0.185″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Glass Cloth Tape; Width (Inch): 1/4; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 10.0000; Tensile Strength (Lb./Inch): 225.00; Maximum Operating Temperature (F): 500.000
• Compression Spring: 2.35″ OD, 6.25″ Free Length 0.207″ Wire Dia, 130.243 lb Max Load, 35.768 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.2031″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Compression Spring: 2.644″ OD, 5″ Free Length 0.225″ Wire Dia, 146.79 lb Max Load, 50.825 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 42 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Spiral Flute Tap: M8 x 0.75, Metric Fine, 3 Flute, Bottoming, 6HX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4631
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.0625″ Dia, 0.053″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated, Single End
• Compression Spring: 2.174″ OD, 5.5″ Free Length 0.192″ Wire Dia, 82.561 lb Max Load, 30.942 lb/in Spring Rate, Stainless Steel
• Square End Mill: 5/16'' Dia, 1-1/8'' LOC, 5/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 38 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.764″ OD, 9.5″ Free Length 0.092″ Wire Dia, 31.069 lb Max Load, 7.28 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M3 x 0.50, Metric, 2 Flute, Bottoming, 6H Class of Fit, High Speed Steel, TiCN Finish 0.625″ Thread Length, 1.9375″ OAL, Right Hand Flute, Right Hand Thread, D3, Series SFGP
• Spiral Point Tap: M3 x 0.5, Metric, 3 Flutes, Plug, 6HX, Powdered Metal High Speed Steel, Sirius Finish 56 mm OAL, Right Hand, D3/D4 Series 4651
• Compression Spring: 0.823″ OD, 7″ Free Length 0.105″ Wire Dia, 41.357 lb Max Load, 14.391 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.076″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Compression Spring: 2.35″ OD, 6.5″ Free Length 0.225″ Wire Dia, 116.218 lb Max Load, 40.186 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.823″ OD, 4.75″ Free Length 0.125″ Wire Dia, 65.649 lb Max Load, 44.471 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill Head: 7/16″ Dia, 5/8″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• Compression Spring: 0.999″ OD, 4.75″ Free Length 0.125″ Wire Dia, 55.049 lb Max Load, 29.086 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Semi-Bottoming, 7GX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D11 & D12, Series 4626