Products

• Turning Insert: VCGW331TN012EA5, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Milling Inserts; Insert Style: XB1N; Insert Size: 200; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Length Range (Decimal Inch): 0.6000 to 0.6500; Series: XB1N; Coating/Finish: TiAlN; Width
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: VCGW220.5FN_A5 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Corner Radius End Mill: 0.0157″ Dia, 0.0472″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Inserts; Insert Style: XR2A; Insert Size: 04802; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 5/8; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Series: XR2A; Coating/Finish: H-Coating; Width (Decimal Inch - 4 Dec
• Turning Insert: VCGW333TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0472″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Corner Radius End Mill: 0.039″ Dia, 0.059″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: VCGW331TN013EA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW2205TN013EA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: VCGW220.5FN_A4 CTBH21U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Milling Insert: XOHX 120410SR-F50 CTCS245, CTCS245, Solid Carbide N/A Finish, 1.0000″ OAW
• Corner Radius End Mill: 0.0236″ Dia, 0.0354″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.375″ Dia, 4 Flute, Solid Carbide 2″ OAL, 3/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Single End
• Moisture Meters & Analyzers; Accuracy: +/- 3%; Minimum Operating Temperature: 14; Maximum Operating Temperature: 104; Maximum Relative Humidity: 50; Application: Firewood; Drywall; Brick; Plaster; Concrete; Lumber; Heat Source: None; Display Type: LCD; Ac
• Compression Spring: 2.233″ OD, 4.25″ Free Length 0.225″ Wire Dia, 172.361 lb Max Load, 80.306 lb/in Spring Rate, Music Wire
• Milling Insert: SDHW 1204AETN-010D_A5 CTBS10U, CTBS10U, Polycrystalline Cubic Boron Nitride N/A Finish, 1.0000″ OAW
• Combo Drill & Countersink: #16, 1/2″ Body Dia, 118 ™, High Speed Steel Bright (Polished) Finish, 3/16″ Point Dia, 3/16″ Point Length, 3″ OAL, Right Hand Cut
• Nutdriver Sets; Drive Size: 1/4 in, 9/16 in, 7/16 in, 5/16 in; Handle Type: Tri-Lobe; Shaft Type: Hollow; Container Type: None; Shaft Length (Inch): 3; Overall Length (Decimal Inch): 7.3700
• Compression Spring: 1.351″ OD, 3.75″ Free Length 0.25″ Wire Dia, 308.043 lb Max Load, 454.83 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Chucking Reamer: 1/2″ Dia, 8″ OAL, 2″ Flute Length, Straight Shank, Cobalt 6 Flute
• Screw Machine Length Drill Bit: 0.209″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Compression Spring: 1.88″ OD, 3.25″ Free Length 270.619 lb Max Load, 233.645 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Combination Wrench: Vanadium Steel, Matte Satin Chrome-Plated
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.118″ Cutting Width, Series TQC27
• ADCT 1505PDFR-HM IC328 Carbide Milling Insert TiCN Finish, 0.6161″ Long x 0.222″ Thick x 0.3768″ Wide
• Square End Mill: 0.011'' Dia, 1/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Jobber Length Drill Bit: 0.377″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.028″ Dia, 0.042″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Double Angle Milling Cutter: 90 °, 1/16″ Cut Dia, 1/32″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, Uncoated, 2 Teeth
• Jobber Length Drill Bit: 0.1063″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.007″ Dia, 0.021″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: CNMG432-27 T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Compression Spring: 0.999″ OD, 2.375″ Free Length 0.162″ Wire Dia, 108.601 lb Max Load, 188.928 lb/in Spring Rate, Stainless Steel
• Double Angle Milling Cutter: 45 °, 5/64″ Cut Dia, 0.039″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, Uncoated, 2 Teeth
• Turning Insert: WNMG433TM T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Trigon, Series WNMG
• Ball End Mill: 0.008″ Dia, 0.024″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• O-Ring: 1.62″ ID x 2.19″ OD, 1/4″ Thick, Silicone with SS Screen Round Cross Section
• Ball End Mill: 0.006″ Dia, 0.018″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: WNMG432TM T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Trigon, Series WNMG
• Compression Spring: 2.409″ OD, 4.25″ Free Length 0.225″ Wire Dia, 160.409 lb Max Load, 70.602 lb/in Spring Rate, Music Wire
• Turning Insert: WNMG431ZF T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Trigon, Series WNMG
• Square End Mill: 1/4'' Dia, 3/8'' LOC, 1/4'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2012
• Compression Spring: 1.41″ OD, 2.25″ Free Length 0.177″ Wire Dia, 100.164 lb Max Load, 134.737 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.014'' Dia, 0.021'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 4.12; Overall Length (mm): 4.12; Material: Metal; Projection: 1.629 in; Finish/Coating: Oil Rubbed Bronze; Maximum Load Capacity: 5.00; Minimum Order Quantity: Metal; Material:
• Milling Insert
• Square End Mill: 0.013'' Dia, 0.019'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.116″ OD, 9.5″ Free Length 0.177″ Wire Dia, 123.762 lb Max Load, 47.539 lb/in Spring Rate, Stainless Steel
• Turning Insert
• Corner Radius End Mill: 3/8″ Dia, 1-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Ball End Mill: 0.008″ Dia, 0.012″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 3/8″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.0625″ Dia, 0.1875″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Series TC5F
• Chucking Reamer: 0.1795″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Milling Insert: XOLX 120410SR-M50 CTCK215, CTCK215, Solid Carbide N/A Finish, 1.0000″ OAW
• Compression Spring: 1.469″ OD, 5″ Free Length 234.346 lb Max Load, 226.446 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.176″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Milling Insert: SDMT 1205ZZSN-31 CTCK215, CTCK215, Solid Carbide N/A Finish, 1.0000″ OAW
• Grooving Insert: GCM5002GF AC830P, Solid Carbide Super FF Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM5025RN AC830P, Solid Carbide Super FF Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Combo Drill & Countersink: #8, 3/8″ Body Dia, High Speed Steel TiCN Finish, 15/32″ Point Dia, 15/32″ Point Length, 1-3/4″ OAL, Right Hand Cut
• Grooving Insert: GCM5002GF AC520U, Solid Carbide Super ZX Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Nutdriver Sets; Drive Size: 1/4 in, 5/16 in; Handle Type: Tri-Lobe; Shaft Type: Hollow; Container Type: None; Shaft Length (Inch): 2; Overall Length (Decimal Inch): 3.9400
• Jobber Length Drill Bit: 0.052″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Grooving Insert: GCM5002GG AC520U, Solid Carbide Super ZX Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Jobber Length Drill Bit: 0.0469″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Compression Spring: 2.468″ OD, 6.25″ Free Length 0.225″ Wire Dia, 110.933 lb Max Load, 38.663 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GCM5002GL AC520U, Solid Carbide Super ZX Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM5004ML AC520U, Solid Carbide Super ZX Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM5025RN AC520U, Solid Carbide Super ZX Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Hex Key Sets; Tool Type: Key Set; Handle Type: L; Hex Size Range (Inch): 0.05
• Grooving Insert: GCM5025RN AC425K, Solid Carbide Super FF Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.085″ Cutting Width, Series TDT
• Abrasive Bur: 5/32, Sphere
• Press Fit Headed Drill Bushing: Type H, #21 ID, 5/16″ OD
• Grooving Insert: GCM5187MG AC425K, Solid Carbide Super FF Finish, Neutral, 0.187″ Cutting Width, 0.906″ Max Depth, Series GND
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.063″ Cutting Width, Series TDT
• Press Fit Headless Drill Bushing: P, 33/64″ ID, 7/8″ OD 1-3/4″ OAL, Carbon Steel
• Grooving Insert: GCM5002GF AC530U, Solid Carbide Super ZX Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Spiral Flute Tap: M10 x 1.25, Metric Fine, 3 Flute, Semi-Bottoming, 6HX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D6 & D7,Series 0394
• Corner Radius End Mill: 5/16″ Dia, 1″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• All-Purpose & Utility Hooks; Overall Length (Inch): 1-19/64; Overall Length (mm): 33.0000; Finish/Coating: Satin; Maximum Load Capacity: 22.00; Additional Information: Projection:23 mm; Height: 55 mm; Distance Between Mounting Holes: 19 mm; Width: 15 mm;
• Spiral Flute Tap: M5 x 0.80, Metric, 2-3 P, 6HX Class of Fit, TiN Finish Right Hand Flute, Right Hand Thread, D4, Series Enorm Z
• Grooving Insert: GCM5025RN AC530U, Solid Carbide Super ZX Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 3/16″ Dia, 1.68″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Holders; Type: Magnetic Door Holder; Overall Length: 93.00; Finish/Coating: Brown; Grade: Fine; Stem Length: 3-3/25; Additional Information: Magnetic Force: 30.8 lb; Material: Polycarbonate; Base Width: 2-5/32 in; Length (Inch): 3; 93.00; Projection: 13/1
• Holders; Type: Magnetic Door Holder; Overall Length: 93.00; Finish/Coating: Ivory; Grade: Fine; Stem Length: 3-3/25; Additional Information: Magnetic Force: 30.8 lb; Material: Polycarbonate; Base Width: 2-5/32 in; Length (Inch): 3; 93.00; Projection: 13/1
• Corner Radius End Mill: 5/16″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• O-Ring: 8.237″ ID x 8.443″ OD, 0.103″ Thick, Dash 172, Viton Round Cross Section
• Compression Spring: 1.469″ OD, 9.5″ Free Length 0.225″ Wire Dia, 179.415 lb Max Load, 70.032 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.109″ Dia, 0.57″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series CoroMill Dura
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series CoroMill Dura
• DCMT11T308GK PR1535 Carbide Turning Insert Megacoat Nano Finish, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 5/32″ Thick, 55° Diamond
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.039″ Cutting Width, Series TDT
• Spiral Point Tap: #4-48, UNF, 3 Flutes, Plug, 2BX, HSS-E, Sirius Finish 56 mm OAL, Right Hand, H3/H4 Series 4643
• Square End Mill: 3/16'' Dia, 1'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.051″ Cutting Width, Series TDT
• Square End Mill: 5/32'' Dia, 3/4'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 42 ° Variable Helix, RH Cut, RH Flute
• Spill Response on Water, 120" OAL, 24 Absorption, Polypropylene, White
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.063″ Cutting Width, Series TDT
• Door Closer Accessories; Type: Door Position Switch; For Use With: Metal Doors & Frames; Color: Black; Series: DPS; Type: Door Position Switch; Accessory Type: Door Position Switch; For Use With: Metal Doors & Frames
• Nutdriver Sets; Drive Size: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16; Handle Type: Tri-Lobe; Shaft Type: Hollow; Container Type: None; Shaft Length (Inch): 4; Overall Length (Decimal Inch): 10.4300
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.085″ Cutting Width, Series TDT
• Grooving Insert: GCM5187RG AC830P, Solid Carbide Super FF Finish, Neutral, 0.187″ Cutting Width, 0.906″ Max Depth, Series GND
• Door Closer Accessories; Type: Door Position Switch; For Use With: Metal Doors & Frames; Color: Gray; Series: DPS; Type: Door Position Switch; Accessory Type: Door Position Switch; For Use With: Metal Doors & Frames
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.104″ Cutting Width, Series TDT-.00E
• Nutdriver Sets; Drive Size: 8 mm, 5 mm, 13 mm, 5.5 mm, 10 mm; Handle Type: Tri-Lobe; Shaft Type: Hollow; Container Type: None; Shaft Length (Inch): 4; Overall Length (Decimal Inch): 10.4300
• Grooving Insert: GCM5008MG AC520U, Solid Carbide Super ZX Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Recessed Pulls; Overall Width (Inch): 5-33/64; Overall Height (mm): 47.00000; Recess Width: 16.00; Recess Height: 40.50; Recess Depth: 16.00; Center to Center: 134.0000; Finish/Coating: Satin; Material: Stainless Steel; Material: Stainless Steel
• Masking Tape: 3″ Wide, 83.33 yd Long, 4 mil Thick, Yellow Polyvinylchloride Film, 0.48 lb/in Tensile Strength
• Grooving Insert: GCM5187ML AC830P, Solid Carbide Super FF Finish, Neutral, 0.187″ Cutting Width, 0.906″ Max Depth, Series GND
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.073″ Cutting Width, Series TDT
• Grooving Insert: GCM5004GG AC520U, Solid Carbide Super ZX Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.085″ Cutting Width, Series TDT
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.104″ Cutting Width, Series TDT-.00E
• Turning Insert: VNMG331EFA T2500Z, Cermet AlN Finish, Neutral, 0.6535″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Triangle, Series T2500Z
• Compression Spring: 2.526″ OD, 5.5″ Free Length 0.207″ Wire Dia, 121.552 lb Max Load, 36.73 lb/in Spring Rate, Music Wire
• RCMT160600ERH AC8015P Carbide Turning Insert Absotech Finish, 16mm Inscribed Circle, 1/4″ Thick, Series AC8000P
• Compression Spring: 1.528″ OD, 3.5″ Free Length 325.946 lb Max Load, 352 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 7.5″ Free Length 0.177″ Wire Dia, 122.347 lb Max Load, 32.636 lb/in Spring Rate, Music Wire
• Grooving Insert: GCM7008ML AC8025P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Grooving Insert: GCM7004MG AC8025P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM7004ML AC8025P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Compression Spring: 2.174″ OD, 4.25″ Free Length 0.225″ Wire Dia, 176.77 lb Max Load, 84.192 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: 1/4-20, UNJC, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Magnetic ″C″ Channel Cardholders, 1/2″ x 3″, Black, 25/Case
• Grooving Insert: GCM7008MG AC8025P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Spiral Flute Tap: #6-40, UNJF, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Compression Spring: 1.821″ OD, 4.25″ Free Length 0.225″ Wire Dia, 208.569 lb Max Load, 118.231 lb/in Spring Rate, Music Wire
• Nutdriver Sets; Drive Size: 1/4 in, 5/16 in; Handle Type: Tri-Lobe; Shaft Type: Hollow; Container Type: None; Shaft Length (Inch): 4; Shaft Length: 1; Overall Length (Decimal Inch): 10.4300
• Spiral Point Tap: M6 x 1, Metric, 3 Flutes, Plug, VC-10 Finish 12 mm Thread Length, 80 mm OAL, Right Hand, D5, Series 350
• Spiral Flute Tap: #10-24, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Compression Spring: 2.468″ OD, 7″ Free Length 0.192″ Wire Dia, 100.775 lb Max Load, 22.728 lb/in Spring Rate, Music Wire
• Grooving Insert: GCM7035RG AC8025P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Compression Spring: 2.409″ OD, 5.5″ Free Length 0.207″ Wire Dia, 127.196 lb Max Load, 39.483 lb/in Spring Rate, Music Wire
• Grooving Insert: GCM7008ML AC5015S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM7004MG AC5015S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Square End Mill: 1/64'' Dia, 0.045'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GCM7008MG AC5015S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM7002GF AC5015S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Damping Stays; Type: Lid Stay; Capacity: 88.000; 40; Overall Length (mm): 213.0000; Thickness (mm): 1.5; Width (mm): 52.00; Side: Left Hand; Maximum Opening: 90.000; Finish/Coating: Polished; Mounting Hole Size Diameter: 4.500; Material: 304 Stainless Ste
• Grooving Insert: GCM7004GF AC5015S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Hasps; Type: Latch Hasp; Pad Length: 12.2000; Arm Length: 2-63/64; Width (Inch): 1-3/32; Overall Length (Inch): 2-63/64; Additional Information: Installation Type: Snap-On; Thickness (mm): 1.5; Weight: 48 g; Slot Length (mm): 21.2; NSF Compliant; Specific
• Grooving Insert: GCM7004GF AC8035P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• DNMG441-SM S205 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 1/4″ Thick, 55° Trigon
• Drawer Slides; Type: 2-Way Mini Drawer Slide; Extension Style: 3/4; Slide Length: 80.00; Travel Length: 48.50; Load Capacity (Lb.): 30.800; Width (Inch): 3/16; Slide Length: 80.00; Material: Stainless Steel; Material Grade: 304; Material: Stainless Steel
• Grooving Insert: GCM7002GF AC8035P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• 3/8″ Diam 3-Flute 37° Solid Carbide Roughing & Finishing End Mill Uncoated, 1″ LOC, 2-1/2″ OAL, 3/8″ Shank Diam, Series AL
• Grooving Insert: GCM7004ML AC5015S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM7004GG AC5015S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 3.33; Overall Length (mm): 3.33; Material: Plastic; Projection: 1.69 in; Finish/Coating: Plastic; Maximum Load Capacity: 2.50; Minimum Order Quantity: Plastic; Material: Plasti
• Corner Radius End Mill: 0.2188″ Dia, 3/4″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 50 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM3F
• Grooving Insert: GCM7004GL AC5015S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Kyocera WNMU 050408ENSM PR1510 Grade PVD Carbide, 80 Degree Trigon, Negative Rake Angle, Neutral Milling insert for Roughing in (K) Gray Cast Iron
• Duct Tape: 72 mm Wide, 5.5 mil Thick, Foil Scrim Kraft Acrylic Adhesive, 22 lb/in Tensile Strength
• Grooving Insert: GCM7035RG AC5015S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Kyocera WNMU 050408ENGM PR1510 Grade PVD Carbide, 80 Degree Trigon, Negative Rake Angle, Neutral Milling insert for Roughing in (K) Gray Cast Iron
• Damping Stays; Type: Lid Stay; Capacity: 88.000; 40; Overall Length (mm): 213.0000; Thickness (mm): 1.5; Width (mm): 52.00; Side: Right Hand; Maximum Opening: 90.000; Finish/Coating: Polished; Mounting Hole Size Diameter: 4.500; Material: 304 Stainless St
• Kyocera WNMU 050408ENSM PR1525 Grade PVD Carbide, 80 Degree Trigon, Negative Rake Angle, Neutral Milling insert for Roughing in (P) Free-Cutting Steel
• Grooving Insert: GCM7004ML AC8035P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Drawer Pulls; Handle Diameter: 0.8980; Width (Decimal Inch): 6.5307; Width (mm): 160.00; Length (Inch): 6-19/64; Projection: 1.5; Center to Center: 5-33/64; Thread Size: 4.1 x 25; Finish/Coating: Satin; Material Grade: 304; Minimum Order Quantity: Stainle
• Kyocera WNMU 050408ENGM PR1525 Grade PVD Carbide, 80 Degree Trigon, Negative Rake Angle, Neutral Milling insert for Roughing in (P) Free-Cutting Steel
• Grooving Insert: GCM7004GG AC8035P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Kyocera WNMU 050408ENGH PR1510 Grade PVD Carbide, 80 Degree Trigon, Negative Rake Angle, Neutral Milling insert for Roughing in (K) Gray Cast Iron
• Grooving Insert: GCM7008MG AC8035P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Kyocera WNMU 050408ENGH PR1535 Grade PVD Carbide, 80 Degree Trigon, Negative Rake Angle, Neutral Milling insert for Roughing in (M) Austenitic Stainless Steel
• Grooving Insert: GCM7004GL AC8035P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Chucking Reamer: 0.0386″ Dia, 1.3396″ OAL, 0.2167″ Flute Length, Straight Shank, Cobalt Steel 3 Flute, RH
• Compression Spring: 1.939″ OD, 6″ Free Length 0.225″ Wire Dia, 139.244 lb Max Load, 62.062 lb/in Spring Rate, Stainless Steel
• Kyocera WNMU 050408ENGH PR1525 Grade PVD Carbide, 80 Degree Trigon, Negative Rake Angle, Neutral Milling insert for Roughing in (P) Free-Cutting Steel
• Grooving Insert: GCM7035RG AC8035P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Kyocera WNMU 050408ENGH PR015S Grade PVD Carbide, 80 Degree Trigon, Negative Rake Angle, Neutral Milling insert for Roughing in (H) Hardened Materials and n/a
• Grooving Insert: GCM7004MG AC8035P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill Head: 1/4″ Dia, 3/4″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• Grooving Insert: GCM7008ML AC8035P, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM7004MG AC5025S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.3843; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.4293; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Milling Inserts; Insert Style: XRAD; Insert Size: 10020; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/8; Thickness Range (Decimal Inch): 0.1000 to 0.1250; Series: XRAD; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Grooving Insert: GCM7008ML AC5025S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Milling Inserts; Insert Style: XRAD; Insert Size: 10010; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/8; Thickness Range (Decimal Inch): 0.1000 to 0.1250; Series: XRAD; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Grooving Insert: GCM7004GF AC5025S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Milling Inserts; Insert Style: XRAD; Insert Size: 10005; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/8; Thickness Range (Decimal Inch): 0.1000 to 0.1250; Series: XRAD; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Milling Inserts; Insert Style: XBAD; Insert Size: 100; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/8; Thickness Range (Decimal Inch): 0.1000 to 0.1250; Series: XBAD; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals):
• Grooving Insert: GCM7002GF AC5025S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Square End Mill: 1/64'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GCM7035RG AC5025S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Engraving Cutter: 300 °, 1/4″ Dia, Tip Radius Point, Solid Carbide TiB2 Finish, 0.452″ LOC, 1/4″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Non-Ferrous Materials
• Ball End Mill: 0.1406″ Dia, 0.562″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: GCM7004GL AC5025S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Horizontal Locker: Padlock Hasp
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Downcut Flute, 40 ° Helix, RH Cut, RH Flute
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.004″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.2643; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Grooving Insert: GCM7004GG AC5025S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.2558; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GCM7008MG AC5025S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Ball End Mill: 0.015″ Dia, 0.078″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Jobber Length Drill Bit: 0.4094″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute
• Grooving Insert: GCM7004ML AC5025S, Solid Carbide Absotech Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 0.1875″ Dia, 3 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Spiral Point Tap: #10-24, UNC, 3 Flutes, Plug, 2B, HSS-E, Hardlube Finish 1.024″ Thread Length, 2.7559″ OAL, Right Hand
• Turning Insert: PDNGA441SN014EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Pipe Wrench: 10″ OAL, Steel 1-1/2″ Max Pipe Capacity
• Turning Insert: PDCGW2151SN014EB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: PCCGW2151SN011CB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: PVCGW331RN_B3 CTBH15C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: DNGA431FN_A6 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Combination Wrench: Vanadium Steel, Matte Satin Chrome-Plated
• File Folders, Expansion Folders & Hanging Files; Folder Type: Poly; File Jackets; Write-On; Dry Erase; Color: Lime, Amber Orange, Steel Blue, Raspberry Red, Charcoal; Index Tabs: Yes
• Turning Insert: PCCGW3255SN014EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: PDCGW2152SN014EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: PDCGW2152SN011CB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: VCGW220.5FN_A5 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Straight Flutes Tap: Metric, 3 Flutes, Semi-Bottoming, 6H, Powdered Metal High Speed Steel, Bright/Uncoated Right Hand, Series CoroTap 100
• Turning Insert: PDCGW3251SN014EB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Modified Bottoming, H11 Class of Fit, Cobalt, GLT-1 Finish 0.669″ Thread Length, 3.543″ OAL, Right Hand Flute, Right Hand Thread, H11, Series BU50C344
• Turning Insert: PCCGW3255SN011CB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: VCGT220.5FN_A5 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Turning Insert: DNGA441FN_A6 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Turning Insert: PCCGW3252SN014EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Milling Insert: RNGN 120700TN-005D CTKS710, CTKS710, Ceramic N/A Finish, 1.0000″ OAW
• Turning Insert: PVCGW221SN011CB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Badge Holders; Attachment Method: Clip-On, Slide-In/Out, Hanging, Cord Mounted; Material: Vinyl; Horizontal/Vertical Holder: Horizontal; Overall Height: 2.375 in; Overall Length: 3.375 in; Color: Clear
• Turning Insert: PVCGW221SN014EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: PCCGW3252SN011CB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.2776; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: PVCGW332SN014EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.3092; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: PVCGW332SN011CB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: PVCGW220.5ENB3 CTBH15C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.2425; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: CNGA432FN_A6 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Portfolios, Report Covers & Pocket Binders; Color: Pink; Overall Width: 8.5 in; Overall Length: 11 in; Material: Paper