Products

• Grooving Insert: TQJJ TT9080, Solid Carbide TiAlN & TiN Finish, Right Hand, 0.059″ Cutting Width, Series TQJ27
• TCMA32.53-AC4015K Carbide Turning Insert Al2O3/TiCN Finish, 16.5mm Long, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 0.1563″ Thick, 60° Included Angle, Series AC4000K
• Milling Insert: SNXF1204ZNENLD, KCK20B, Solid Carbide N/A Finish, 0.5000″ OAW
• Milling Insert: SNXF1204ZNSNGP, KCK20B, Solid Carbide N/A Finish, 0.5000″ OAW
• Grooving Insert: TQJJ TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.049″ Cutting Width, Series TQJ27
• Milling Insert: SNXF120412SNGP, KCK20B, Solid Carbide N/A Finish, 0.5000″ OAW
• Compression Spring: 2.115″ OD, 6.25″ Free Length 168.648 lb Max Load, 75.919 lb/in Spring Rate, Stainless Steel
• Milling Insert: SNXF1204ZNSNHE, KCK20B, Solid Carbide N/A Finish, 0.5000″ OAW
• Ball End Mill: 0.06″ Dia, 0.09″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 1/4'' Dia, 1'' LOC, 1/4'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.02″ Dia, 0.06″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Glass Cloth Tape; Width (Inch): 3/4; Material Type: UPVC; Color: Shiny Silver; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 10.5000; Tensile Strength (Lb./Inch): 36.00; Minimum Operating Temperature (F): -65.000; Maximum Operating Temp
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.187″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.025″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Compression Spring: 0.823″ OD, 1.75″ Free Length 0.148″ Wire Dia, 101.794 lb Max Load, 293.925 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.12″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 1.528″ OD, 2.875″ Free Length 0.135″ Wire Dia, 45.339 lb Max Load, 31.452 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.116″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• 1/4″ Cut Diam, 7/8″ Flute Length, Solid Carbide Solid Counterbore Uncoated, 4 Flutes, 1/4″ Shank Diam, 2-1/2 OAL
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.055″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Jobber Length Drill Bit: 0.397″ Dia, 118 °, High Speed Steel Bright/Uncoated, 5.125″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 0.045'' Dia, 0.068'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 5/64'' Dia, 0.12'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• White Double-Sided Urethane Foam Tape: 3/4″ Wide, 4.5 yd Long, 62.5 mil Thick, Acrylic Adhesive
• Square End Mill: 7/64'' Dia, 0.164'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.1181″ Dia, 0.315″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: DCMT21.50.5FA CT3000, Cermet Uncoated Finish, Neutral, 0.3030″ Long, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMT
• Square End Mill: 5/64'' Dia, 15/64'' LOC, 1/8'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Compression Spring: 1.88″ OD, 5.75″ Free Length 0.162″ Wire Dia, 81.484 lb Max Load, 23.497 lb/in Spring Rate, Music Wire
• Compression Spring: 0.823″ OD, 6.75″ Free Length 0.148″ Wire Dia, 135.637 lb Max Load, 76.15 lb/in Spring Rate, Music Wire
• Turning Insert: TCMT21.51FG PV3010, Cermet TiN Finish, Neutral, 0.4330″ Long, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TCMT
• Screw Machine Drill Bit L7572P 3.02 2FL PM HSS SG STUB DRILL
• 1.4mm, 118° Drill Point, 1.4mm Shank Diam, Fast Spiral Circuit Board Drill Bit 16mm Flute Length, 38mm OAL, Series 300
• Compression Spring: 1.4″ OD, 3″ Free Length 0.162″ Wire Dia, 79.924 lb Max Load, 69.972 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.1406″ Dia, 0.425″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Chucking Reamer: 0.186″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Compression Spring: 2.056″ OD, 9.5″ Free Length 173.133 lb Max Load, 51.355 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 2.5″ Free Length 0.225″ Wire Dia, 253.533 lb Max Load, 355.541 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1406″ Dia, 0.22″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert
• Electromagnet Lock Accessories; Type: Door Cord; For Use With: Access Control; Material: Brass; Material: Brass; For Use With: Access Control; Type: Door Cord; Accessory Type: Door Cord; Type: Door Cord
• Chucking Reamer: 11/64″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Lockset Accessories; Type: SFIC Pin Segment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: SFIC Pin Segment; For Use With: Best
• Heat Resistant Torque Hinge: Stainless Steel, Satin Chrome Finish
• Press Fit Headed Drill Bushing: Type H, 1-1/32″ ID, 1-3/8″ OD
• Heat Resistant Torque Hinge: Stainless Steel, Satin Chrome Finish
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Square End Mill:
• Heat Resistant Torque Hinge: Stainless Steel, Satin Chrome Finish
• Lockset Accessories; Type: SFIC Pin Segment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: SFIC Pin Segment; For Use With: Best
• Compression Spring: 0.999″ OD, 7.5″ Free Length 0.192″ Wire Dia, 167.453 lb Max Load, 120.388 lb/in Spring Rate, Stainless Steel
• Lockset Accessories; Type: SFIC Pin Segment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: SFIC Pin Segment; For Use With: Best
• Square End Mill: 7/16'' Dia, 2'' LOC, 7/16'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Turning Insert: CCGT21.5.5FNA3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Lockset Accessories; Type: SFIC Pin Segment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: SFIC Pin Segment; For Use With: Best
• Turning Insert: CCGT32.5.5FNA3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Corner Radius End Mill: 3 Flutes, Solid Carbide 39, 40 & 41 ° Helix, Carbo Coated, Corner Chamfer End, Centercutting, Series 6979
• 2.5mm x 25' Buna-N Round Cord Stock 250°F Max, Shore 70A, 2,050 psi Tensile Strength, Black
• Compression Spring: 1.586″ OD, 4.25″ Free Length 219.119 lb Max Load, 222.556 lb/in Spring Rate, Stainless Steel
• Gray Double-Sided Foam Tape: 1/2″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Polyester Film Tape: 1/4″ Wide, 72 yd Long, 2 mil Thick 329.9 Lb/In Tensile Strength, Acrylic Adhesive, -99.4 to 500 ° F
• Compression Spring: 2.82″ OD, 9″ Free Length 0.225″ Wire Dia, 97.658 lb Max Load, 21.336 lb/in Spring Rate, Stainless Steel
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 588
• Ball End Mill: 0.4375″ Dia, 1″ LOC, 2 Flute, Solid Carbide 2-3/4″ OAL, 7/16″ Shank Dia, 45 ° Helix, ZrN Coated, Single End, Series 2015
• Turning Insert: DCGT2151FNA3CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Ball End Mill: 0.09″ Dia, 0.27″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: DCGT2155FNA4CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Turning Insert: DCGT2152FNA3CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Jobber Length Drill Bit: 0.2969″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: TCGT2151FNA3CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: TCGT2155FNA4CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Milling Insert: OAKU 060508ER-F40 CTPM245, CTPM245, Solid Carbide N/A Finish, 1.0000″ OAW
• Turning Insert: DCGT2151FNA3CB3, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: DCGT2155FNA4CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Ball End Mill: 0.047″ Dia, 0.141″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Spiral Point Tap: #10-32, UNF, 3 Flutes, Plug, 2B/3B, Powdered Metal, AlTiN Finish 37/64″ Thread Length, 2-3/8″ OAL, Right Hand, H3, Series 773
• Turning Insert: DCGT2151FNA3CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Turning Insert: TCGT2155FNA4CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Spiral Point Tap: #4-40, UNC, 3 Flutes, Plug, 2B/3B, Powdered Metal, AlTiN Finish 9/16″ Thread Length, 1-7/8″ OAL, Right Hand, H2, Series 773
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Turning Insert: TCGT2151FNA3CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Turning Insert: DCGT2155FNA4CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Ball End Mill: 0.033″ Dia, 0.049″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Turning Insert: DCGT2151FNA3CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Square End Mill: 0.2362'' Dia, 0.7486'' LOC, 0.2362'' Shank Dia, 2.2835'' OAL, 5 Flutes, Solid Carbide AlTiN Finish, 45 ° Helix, Centercutting, Series MSM5F-NB
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Turning Insert: DCGT2150FNA4CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Milling Insert: T1215, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Turning Insert: DCGT2150FNA4CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• 7/8″ Head Diam, 1/2″ Shank Diam, 1 Flute 90° High Speed Steel Countersink 2-3/4″ OAL, Straight Shank
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Ball End Mill: 0.047″ Dia, 0.071″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Nano Coated, Single End
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Ball End Mill: 0.039″ Dia, 0.059″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Nano Coated, Single End
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.031″ Dia, 0.047″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Nano Coated, Single End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.047″ Dia, 0.071″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• 3/32″ x 25' Neoprene Round Cord Stock 250°F Max, Shore 70A, 1,600 psi Tensile Strength, Black
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Flute Tap: 1/2-13 , UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, Nitride Finish 1.6563″ Thread Length, Right Hand Flute, Right Hand Thread, H3, Series 13019
• Ball End Mill: 0.065″ Dia, 0.195″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• SQ POS TAKE RH Carbide Milling Insert Megacoat Nano Finish, 4.58mm Thick
• SQ POS TAKE RH Carbide Milling Insert Megacoat Nano Finish, 4.58mm Thick
• Ball End Mill: 0.031″ Dia, 0.046″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Spiral Point Tap: #10-24, UNC, 3 Flutes, Plug, 2B/3B, Powdered Metal, TiCN Finish 37/64″ Thread Length, 2-3/8″ OAL, Right Hand, H3, Series 778
• Kyocera SOMT 100420ERGH PR1510 Grade PVD Carbide, Indexable Milling Insert, Square, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (K) Gray Cast Iron, (K) Nodular Cast Iron
• Chucking Reamer: 0.2975″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Chucking Reamer: 0.2055″ Dia, 5″ OAL, 1-1/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Chucking Reamer: 0.3025″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Ball End Mill: 0.07″ Dia, 0.21″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.07″ Dia, 0.21″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, Uncoated, Single End
• Chucking Reamer: 0.3045″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Ball End Mill: 0.033″ Dia, 0.049″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 0.315'' Dia, 0.7874'' LOC, 0.315'' Shank Dia, 2.5197'' OAL, 5 Flutes, Solid Carbide AlCrN Finish, 45 ° Helix, Centercutting, Series MSM5F
• Square End Mill: 0.315'' Dia, 0.7874'' LOC, 0.315'' Shank Dia, 2.5197'' OAL, 5 Flutes, Solid Carbide AlTiN Finish, 45 ° Helix, Centercutting, Series MSM5F-NB
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.1406″ Dia, 0.22″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Boring Bar: 0.176″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.132″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Turning Insert: CCGT5.52.20R-W08 SH730, Solid Carbide TiAlN Finish, Right Hand, 0.0040″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Boring Bar: 0.152″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Boring Bar: 0.152″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Turning Insert: CCGT4.51.8VR-W08 SH730, Solid Carbide TiAlN Finish, Right Hand, 0.0010″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Boring Bar: 0.152″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Turning Insert: CCGT4.51.8VL-W08 SH730, Solid Carbide TiAlN Finish, Left Hand, 0.0010″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Jobber Length Drill Bit: 0.404″ Dia, 135 °, Cobalt Bright/Uncoated, 5.25″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 1/8″ Dia, 0.1563″ LOC, 0.0100″ Radius, 4 Flute, Solid Carbide 3″ OAL, 0.1250″ Shank Dia, N/A Aplus Coated, Corner Radius End, Centercutting, Series End Mills for Steels - 4 Flute - Corner Radius - Variable Pitch - Reduced
• Chucking Reamer: 0.02″ Dia, 1-1/2″ OAL, 3/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Turning Insert: CCGT4.51.81R-W08 SH730, Solid Carbide TiAlN Finish, Right Hand, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Compression Spring: 1.939″ OD, 9.5″ Free Length 182.747 lb Max Load, 58.052 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 37 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 1015
• Turning Insert: CCGT5.52.20L-W08 SH730, Solid Carbide TiAlN Finish, Left Hand, 0.0040″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: DNGA441SN009DK3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Compression Spring: 1.939″ OD, 4.5″ Free Length 0.177″ Wire Dia, 101.207 lb Max Load, 39.73 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.0787″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Turning Insert: DNGA442SN016EK3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Turning Insert: CCMT21.51PM T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Turning Insert: CNGA432SN014FK3Q, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: DNGA442SN011CK3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Spiral Flute Tap: 1/2-20, UNF, 3 Flute, Semi-Bottoming, 2BX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 0392
• Chucking Reamer: 0.1225″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Spiral Flute Tap: 1/4-28, UNF, 2 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-8 Finish 0.669″ Thread Length, 3.15″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50S810
• VNMG333ENZ-AC4015K Carbide Turning Insert Al2O3/TiCN Finish, 16.6mm Long, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 35° Included Angle, Series AC4000K
• Spiral Flute Tap: 7/16-20, UNF, 3 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 0392
• VNMG333ENZ-AC4010K Carbide Turning Insert Al2O3/TiCN Finish, 16.6mm Long, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 35° Included Angle, Series AC4000K
• Spiral Flute Tap: 1/4-28, UNF, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-8 Finish 3.15″ OAL, Right Hand Flute, Right Hand Thread, H4, Series BU50S800
• Turning Insert: CPMT432CM T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CPMT
• Ball End Mill: 0.1875″ Dia, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, Variable ° Helix, AlCrN Coated, Single End
• Milling Insert: SPEN1203EESR PR1810, Carbide
• VNMG333EEG AC8015P Carbide Turning Insert Absotech Finish, 0.6535″ Long, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 35° Included Angle, Series AC8000P
• VNMG332EEG AC8025P Carbide Turning Insert Absotech Finish, 0.6535″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 35° Included Angle, Series AC8000P
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 0.669″ Thread Length, 3.15″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50C310
• Corner Radius End Mill Head: 1/4″ Dia, 3/4″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• Spiral Flute Tap: #0-80, UNF, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.236″ Thread Length, 1.626″ OAL, Right Hand Flute, Right Hand Thread, H2, Series BU50C300
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.669″ Thread Length, 3.15″ OAL, Right Hand Flute, Right Hand Thread, H4, Series BU50C300
• Spiral Flute Tap: #0-80, UNF, 2 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 1.626″ OAL, Right Hand Flute, Right Hand Thread, H1, Series BU50C310
• Square End Mill: 0.062'' Dia, 3/64'' LOC, 1.5'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.04″ Dia, 0.032″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Kyocera CNMG 432WQ CA5525 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Finishing-Medium in (P) Carbon/Alloy Steel
• Compression Spring: 1.175″ OD, 8.5″ Free Length 0.135″ Wire Dia, 58.097 lb Max Load, 15.583 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 2 mm Dia, 5 Flutes, Solid Carbide 80 mm OAL, 8 mm Shank Dia, TiAlN Coated
• Kyocera CNMG 433PS CA5535 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Heavy Interruption and Medium-Roughing in (P) Carbon/Alloy Steel
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 3 Flutes, Solid Carbide 37 ° Helix, AlTiN Coated, Corner Radius End
• Jobber Length Drill Bit: 0.2949″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• CNMG120408 CA5535 Carbide Turning Insert TiCl2O3/TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 80° Diamond, Series CA55
• Spiral Flute Tap: #4-40, UNC, 2 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, TICN Finish 2.205″ OAL, Right Hand Flute, Right Hand Thread, H2, Series BU459611
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• CNMG130412PH CA4515 Carbide Turning Insert TiCl2O3 Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 80° Diamond, Series CA45
• Jobber Length Drill Bit: 0.2913″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Rigid Top Plate Caster: Polyurethane, 6″ Wheel Dia, 2″ Wheel Width, 661 lb Capacity, 7-3/8″ OAH 4″ Plate Length, 4.5″ Plate Width, No Brake
• Replacement Wheel
• Straight Flutes Tap: Metric Coarse, 4 Flutes, Plug, 6H, High Speed Steel, TiN Finish 1-21/32″ Thread Length, Right Hand, D7, Series 757
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 8.66; Load Capacity: 52 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 5.66; Extension Force: 5
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 585
• Straight Flutes Tap: Metric Coarse, 4 Flutes, Bottoming, 6H, High Speed Steel, TiN Finish 1-21/32″ Thread Length, Right Hand, D7, Series 757
• Replacement Wheel
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 283
• Replacement Wheel
• Chamfer Mill: 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 0.1562″ Dia, 3/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.062″ Dia, 0.248″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated, Single End
• Square End Mill: 1/8'' Dia, 1/2'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN+ Finish, Spiral Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series 6/44
• Corner Radius End Mill: 9/64″ Dia, 3/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Square End Mill: 1/32'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.125″ Dia, 0.5″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 9/64″ Dia, 3/4″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Jobber Length Drill Bit: 0.2969″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute
• Carpet & Tile Installation Tools; Type: Tile Cutter; Application: Linoleum, Vinyl Flooring
• Grooving Insert: PENTA17N200P010P IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 2 mm Cutting Width, 4 mm Max Depth, Series PentaCut
• Grooving Insert: PENTA17N075P000P IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 0.75 mm Cutting Width, 2.5 mm Max Depth, Series PentaCut
• Square End Mill: 1/64'' Dia, 0.024'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• High Temperature Masking Tape: 3″ Wide, 60 yd Long, 7 mil Thick, Tan Crepe Paper, Rubber Adhesive, 31 lb/in Tensile Strength
• Square End Mill: 1/8'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.019'' Dia, 0.029'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.017'' Dia, 0.026'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.315″ Cutting Width, Series TDT-.00E
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.315″ Cutting Width, Series TDT-.00E
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDT-.00E
• Corner Radius End Mill: 0.0236″ Dia, 0.0354″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDT-.00E
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.003″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: TDTT TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.315″ Cutting Width, Series TDT-.00E
• Double Angle Milling Cutter: 60 °, 3/16″ Cut Dia, 0.065″ Cut Width, 3/16″ Shank Dia, Solid Carbide 2″ OAL, Uncoated, 4 Teeth
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: PENTA17N239P010P IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 2.39 mm Cutting Width, 4 mm Max Depth, Series PentaCut
• Ball End Mill: 1″ LOC, 3 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 42 ° Helix, Uncoated
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Ball End Mill: 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• Milling Insert: XOHX 163030-MR2 CTPP211, CTPP211, Solid Carbide N/A Finish, 1.0000″ OAW
• Grooving Insert: PENTA17N140P010P IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 1.4 mm Cutting Width, 3 mm Max Depth, Series PentaCut
• Corner Radius End Mill: 0.031″ Dia, 5/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• White Double-Sided Paper Tape: 1-1/2″ Wide, 36 yd Long, 6 mil Thick, Synthetic Rubber Adhesive
• Corner Radius End Mill: 0.035″ Dia, 3/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.351″ OD, 5″ Free Length 0.112″ Wire Dia, 30.855 lb Max Load, 10.998 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.1562″ Dia, 3/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.351″ OD, 2.875″ Free Length 0.135″ Wire Dia, 50.962 lb Max Load, 38.371 lb/in Spring Rate, Stainless Steel
• Turning Insert: CCMT32.51PM AH6225, Solid Carbide TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Compression Spring: 1.586″ OD, 3″ Free Length 0.207″ Wire Dia, 188.324 lb Max Load, 166.239 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.031″ Dia, 5/32″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 13/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1-3/4″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.031″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Grooving Insert: PENTA17N120P010P IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 1.2 mm Cutting Width, 3 mm Max Depth, Series PentaCut
• Turning Insert: SCMT432PM AH645, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 90.0 &deg N/A Square, Series SCMT
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Precision Compression Spring: 0.7600" OD, 7-1/2" Free Length
• Corner Radius End Mill: 3/8″ Dia, 5/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Polyimide Film Tape: 1/2″ Wide, 36 yd Long, 2.3 mil Thick 23 Lb/In Tensile Strength, Acrylic Adhesive, -20 to 350 ° F
• Precision Compression Spring: 0.7600" OD, 6-3/4" Free Length
• Grooving Insert: TDITT TT7220, Solid Carbide TiCN Finish, Neutral, 0.315″ Cutting Width, Series TDIT-.00E