Products

• 6, 7 Pin Best I/C Core Cylinder Small Format IC Brass, Satin Chrome Finish
• Milling Insert: RPHX 10T3M8SN-M50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.025″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• 6, 7 Pin Best I/C Core Cylinder Small Format IC Brass, Satin Chrome Finish
• Compression Spring: 1.528″ OD, 3.25″ Free Length 0.192″ Wire Dia, 158.491 lb Max Load, 119.94 lb/in Spring Rate, Music Wire
• Milling Insert: RPHX 10T3M8SN-F50 CTPM240, CTPM240, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.025″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Milling Insert: RPHX 10T3M8EN-M30 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Milling Insert: RPHX 10T3M8SN CTCP230, CTCP230, Solid Carbide N/A Finish,
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.1598; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 1.175″ OD, 6″ Free Length 0.148″ Wire Dia, 98.729 lb Max Load, 36.884 lb/in Spring Rate, Music Wire
• Corner Radius End Mill Head: 1/8″ Dia, 1/4″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• Corner Radius End Mill: 3/16″ Dia, 9/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.175″ OD, 3″ Free Length 0.207″ Wire Dia, 246.038 lb Max Load, 344.851 lb/in Spring Rate, Music Wire
• Pneumatic Caster Wheel: Rubber, 16″ Dia, 4″ Wide 309 lb Capacity, Plain Bearing
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, TiB2 Finish, 50 ° Variable Helix, RH Cut, RH Flute
• Square End Mill: 3/8'' Dia, 1/2'' LOC, 3/8'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 35 ° Variable Helix, Centercutting, RH Cut, RH Flute, Series CoroMill Dura
• Ball End Mill: 0.06″ Dia, 0.312″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• UHMW Film Tape: 1″ Wide, 5 yd Long, 20 mil Thick 145 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Clear Double-Sided Acrylic Tape: 1″ Wide, 2 yd Long, 40 mil Thick, Acrylic Adhesive
• Compression Spring: 0.705″ OD, 2.875″ Free Length 0.112″ Wire Dia, 56.444 lb Max Load, 68.104 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.764″ OD, 5.5″ Free Length 0.085″ Wire Dia, 25.085 lb Max Load, 9.459 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.04″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 3/16'' Dia, 0.285'' LOC, 3/16'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.999″ OD, 6″ Free Length 0.148″ Wire Dia, 114.443 lb Max Load, 52.641 lb/in Spring Rate, Music Wire
• Square End Mill: 5/32'' Dia, 0.235'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.293″ OD, 5.5″ Free Length 0.225″ Wire Dia, 200.667 lb Max Load, 174.614 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/8'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.999″ OD, 4.25″ Free Length 0.177″ Wire Dia, 185.703 lb Max Load, 171.485 lb/in Spring Rate, Music Wire
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.062″ Cut Width, 1/8″ Shank Dia, Staggered Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide
• Compression Spring: 1.293″ OD, 2.875″ Free Length 0.207″ Wire Dia, 226.369 lb Max Load, 281.539 lb/in Spring Rate, Music Wire
• Spiral Point Tap: M8 x 1.25, Metric, 2 Flutes, Plug, 6H, High Speed Steel, TiCN Finish 1-1/8″ Thread Length, 2-23/32″ OAL, Right Hand, D5, Series SPGP
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: SFHT 0903AFSR-F50 CTCP220, CTCP220, Solid Carbide N/A Finish,
• Compression Spring: 1.821″ OD, 2.625″ Free Length 0.207″ Wire Dia, 165.716 lb Max Load, 146.948 lb/in Spring Rate, Music Wire
• Milling Insert: SFHT 0903AFSR-F50 CTCM235, CTCM235, Solid Carbide N/A Finish,
• Boring Bar: 0.11″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.003″ Corner Radius
• Compression Spring: 1.41″ OD, 2.625″ Free Length 0.135″ Wire Dia, 48.941 lb Max Load, 39.533 lb/in Spring Rate, Stainless Steel
• Poly Mailer: Pouch, 10″ OAW, 13″ OAL, 100 Pk
• Milling Insert: SFHT 0903AFSR-F50 CTPM240, CTPM240, Solid Carbide N/A Finish,
• Boring Bar: 0.16″ Min Bore, 0.6″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.003″ Corner Radius
• Compression Spring: 1.469″ OD, 3.25″ Free Length 0.192″ Wire Dia, 164.335 lb Max Load, 130.302 lb/in Spring Rate, Music Wire
• Poly Mailer: Pouch, 10″ OAW, 13″ OAL, 100 Pk
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.075″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: OFHT 040305SN-F50 CTCP230, CTCP230, Solid Carbide N/A Finish,
• Compression Spring: 1.704″ OD, 4″ Free Length 0.177″ Wire Dia, 114.377 lb Max Load, 56.144 lb/in Spring Rate, Music Wire
• 1/4″ x 10' Buna-N Round Cord Stock 250°F Max, Shore 70A, 2,050 psi Tensile Strength, Black
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Door Closer Accessories; For Use With: SEM7810 Series Door Closers; Finish/Coating: Sprayed Aluminum; For Use With: SEM7810 Series Door Closers
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 0.6 mm Max Depth, Series 25654
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 25.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 46.0000; Finish Coating: TiCN; Serie
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated, Single End
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 0.7 mm Max Depth, Series 25654
• Press Fit Headless Drill Bushing: P, 1/2″ ID, 3/4″ OD 7/8″ OAL, Carbon Steel
• BDR0750 Grade FP-GLH Carbide Milling Insert 3/4″ Inscribed Circle, 1/32″ Corner Radius
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 0.4 mm Max Depth, Series 25654
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Press Fit Headless Drill Bushing: P, 11/64″ ID, 1/2″ OD 1/2″ OAL, Carbon Steel
• Corner Chamfer End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Modified Bottoming, H11 Class of Fit, Cobalt, GLT-1 Finish 0.669″ Thread Length, 3.15″ OAL, Right Hand Flute, Right Hand Thread, H11, Series BU50C344
• Impact Socket: 3/4″ Drive 6-Point
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, AlTiN Finish 0.5″ Thread Length, 2.9375″ OAL, Right Hand Flute, Right Hand Thread, H4, Series 779
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Impact Socket: 3/4″ Drive 6-Point
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 3/8'' Dia, 7/8'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Duarise Finish, Straight Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 8200
• Impact Socket: 3/4″ Drive 6-Point
• Square End Mill: 1/4'' Dia, 1-1/2'' LOC, 1/4'' Shank Dia, 4'' OAL, 4 Flutes, Solid Carbide AlCrN Finish, 45 ° Helix, Centercutting, Series XP
• Impact Socket: 3/4″ Drive 6-Point
• Impact Socket: 3/4″ Drive 6-Point
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1247; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Polyethylene Film Tape: 24″ Wide, 25' x 2 mil Thick 2,500 Lb/In Tensile Strength, Acrylic Adhesive
• Spiral Point Tap: 7/16-20, UNF, 3 Flutes, Plug, 2BX, HSS-E, Sirius Finish 100 mm OAL, Right Hand, H6/H7, Series 4643
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, TiCN Finish 0.5″ Thread Length, 2.9375″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 781
• Boring Bar: 0.12″ Min Bore, 0.7″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.003″ Corner Radius
• Compression Spring: 1.116″ OD, 3.5″ Free Length 0.192″ Wire Dia, 210.085 lb Max Load, 231.9 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.093″ Dia, 0.279″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated, Single End
• Square End Mill: 0.4724'' Dia, 0.8661'' LOC, 5 Flutes, Solid Carbide Single End, Uncoated, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Flute Tap: M10 x 1.50, M, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D5, Series C0503000
• Spiral Flute Tap: 7/16-20, UNF, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, TiCN Finish 0.62″ Thread Length, 3.1563″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 781
• #7, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 0.48″ Flute Length, 1-1/2″ OAL, Series 306
• Compression Spring: 2.585″ OD, 7″ Free Length 139.686 lb Max Load, 48.254 lb/in Spring Rate, Stainless Steel
• #9, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 0.48″ Flute Length, 1-1/2″ OAL, Series 306
• Turning Insert: VCGW220.5FN_A5 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW221FN_A5 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW220.5FN_A5 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert
• Turning Insert: VCGW222TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW221TN012EA5, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 0.588″ OD, 4″ Free Length 0.098″ Wire Dia, 46.583 lb Max Load, 41.341 lb/in Spring Rate, Stainless Steel
• Turning Insert: VCGW222FN_A4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 0.881″ OD, 2.25″ Free Length 0.125″ Wire Dia, 61.751 lb Max Load, 85.506 lb/in Spring Rate, Stainless Steel
• Turning Insert: VCGW21.51FN_A3 CTBH21U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 1.351″ OD, 5″ Free Length 0.162″ Wire Dia, 111.271 lb Max Load, 48.402 lb/in Spring Rate, Music Wire
• Turning Insert: VCGW2155TN013EA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Milling Insert: WSM35S, Solid Carbide N/A Finish,
• Screw Machine Length Drill Bit: 0.2055″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Milling Insert: WKK25S, Solid Carbide N/A Finish,
• Spiral Flute Tap: M8 x 1.25, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 36 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Milling Insert: WSM35S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series CoroMill Dura
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 36 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Milling Insert: WKK25S, Solid Carbide N/A Finish,
• Chucking Reamer: 0.1495″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Boring Bar: 0.1″ Min Bore, 0.3″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL
• Jobber Length Drill Bit: 0.375″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: RCMT 06 02 M0 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1181″ Corner Radius, N/A Round, Series RCMT
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.2313; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Polyimide Film Tape: 1/2″ Wide, 5 yd Long, 2.7 mil Thick 33 Lb/In Tensile Strength, Silicone Adhesive, -99.4 to 500 ° F
• Turning Insert: RCMT 06 03 00 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1250″ Corner Radius, N/A Round, Series RCMT (INCH)
• Turning Insert: WBGT520L-W08 SH730, Solid Carbide TiAlN Finish, Left Hand, 0.0040″ Corner Radius, 80.0 &deg N/A Trigon, Series WBGT
• Turning Insert: EPGT4.51.8VR-W08 SH730, Solid Carbide TiAlN Finish, Right Hand, 0.0010″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Turning Insert: EPGT521L-W08 SH730, Solid Carbide TiAlN Finish, Left Hand, 0.0160″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Turning Insert: EPGT4.51.81R-W08 SH730, Solid Carbide TiAlN Finish, Right Hand, 0.0160″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Turning Insert: EPGT4.51.80R-W08 SH730, Solid Carbide TiAlN Finish, Right Hand, 0.0040″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Turning Insert: EPGT451805RW08 SH730, Solid Carbide TiAlN Finish, Right Hand, 0.0080″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Compression Spring: 0.705″ OD, 8″ Free Length 0.135″ Wire Dia, 120.912 lb Max Load, 63.429 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Dovetail Cutter: 1 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Dovetail Cutter: 4 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Turning Insert: WBGT520.5L-W08 GH110, Solid Carbide TiCNO Finish, Left Hand, 0.0080″ Corner Radius, 80.0 &deg N/A Trigon, Series WBGT
• Square End Mill: 5/32'' Dia, 0.235'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: WBGT520.5L-JS SH730, Solid Carbide TiAlN Finish, Left Hand, 0.0080″ Corner Radius, 80.0 &deg N/A Trigon, Series WBGT
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Dovetail Cutter: 2 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Dovetail Cutter: 6 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Jobber Length Drill Bit: 0.1457″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Turning Insert: EPGT4.51.81F-JS SH725, Solid Carbide TiAlN Finish, Neutral, 0.0160″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Ball End Mill: 0.5″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Compression Spring: 2.115″ OD, 4.25″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 36.936 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XRBA; Insert Size: 26005; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XRBA; Coating/Finish: H-Coating;
• Screw Machine Length Drill Bit: 0.1495″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 206
• Milling Inserts; Insert Style: XRBA; Insert Size: 26010; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XRBA; Coating/Finish: H-Coating;
• Compression Spring: 1.88″ OD, 7.5″ Free Length 0.177″ Wire Dia, 104.224 lb Max Load, 24.85 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XRBA; Insert Size: 26020; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Length Range (Decimal Inch): 0.7000 to 0.9000; Series: XRBA; Coating/Finish: H-Coating;
• Compression Spring: 1.939″ OD, 5.5″ Free Length 0.162″ Wire Dia, 79.111 lb Max Load, 23.504 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: EPGT520.5R-W08 GH110, Solid Carbide TiCNO Finish, Right Hand, 0.0080″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: EPGT520F-JS SH725, Solid Carbide TiAlN Finish, Neutral, 0.0040″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.645″ OD, 6.75″ Free Length 0.148″ Wire Dia, 71.988 lb Max Load, 17.837 lb/in Spring Rate, Music Wire
• FRL Combination Unit: 1/4 NPT, 1 Pc Filter/Regulator
• Tapered End Mill: 15 ° per Side, 1/64″ Small Dia, 5/64″ LOC, 3 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Ball
• Square End Mill: 5/32'' Dia, 5/8'' LOC, 3/16'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Square End Mill: 0.0787'' Dia, 0.1969'' LOC, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.008″ Dia, 0.024″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.062″ Dia, 0.312″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Single End
• Square End Mill: 0.0709'' Dia, 0.2087'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Cord Stock; Shape: Round; System of Measurement: Inch; Diameter (Decimal Inch): 0.2100; Tensile Strength (psi): 725; Coil Length (Feet): 3; Durometer: 70; Maximum Temperature (F): 350.000; Durometer (Shore A): 70A; Standard; Hardness: Standard
• Square End Mill: 0.0433'' Dia, 0.1299'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Tapered End Mill: 15 ° per Side, 5/32″ LOC, 3 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Ball
• Square End Mill: 0.0512'' Dia, 0.1535'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.005'' Dia, 0.007'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Square End Mill: 0.005'' Dia, 0.007'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Swivel Top Plate Caster: Thermoplastic Rubber, 4″ Wheel Dia, 1-1/4″ Wheel Width, 247 lb Capacity, 4-15/16″ OAH 2.875″ Plate Length, 3.63″ Plate Width, No Brake
• Square End Mill: 0.0591'' Dia, 0.1654'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.011'' Dia, 1/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.02″ Dia, 0.1″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated
• Turning Insert
• 6.05mm, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Ball End Mill: 0.006″ Dia, 0.009″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• FRL Combination Unit: 1/2 NPT, 1 Pc Filter/Regulator
• Compression Spring: 0.705″ OD, 2.125″ Free Length 0.135″ Wire Dia, 91.644 lb Max Load, 229.841 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.764″ OD, 4″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 22.775 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• 6.2mm, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.94″ OD, 2.25″ Free Length 0.125″ Wire Dia, 58.215 lb Max Load, 74.228 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.07″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.94″ OD, 6.25″ Free Length 0.085″ Wire Dia, 20.624 lb Max Load, 5.881 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Slide Bolts; Type: Spring Loaded Barrel Bolt; Length (mm): 90.00; Width (mm): 40.50; Finish/Coating: Satin; Additional Information: Weight: 147 g; Counter Plate Size: 18 x 42 x 1 mm; Screw: 3.5 x 20; Overall Length: 115.4 mm; Minimum Order Quantity: 304 S
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• SCGT32.51RFX-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.375″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1563″ Thick, 90° Included Angle, Series AC5000S
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0319; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Caulk & Sealants; Chemical Type: Rubber; Container Size: 14 fl oz; Container Type: Aerosol; Color: Clear; Application: Roofs, Gutters, Skylights, Flashing, Chimneys (Exterior Use Only), PVC Pipe Joints, Windows, RVs, DIY Projects & More
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.07″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.05″ Dia, 0.3″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.008″ Dia, 0.012″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.055″ Dia, 0.385″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Combo Drill & Countersink: #2, 3/16″ Body Dia, 118 ™, High Speed Steel Bright (Polished) Finish, 5/64″ Point Dia, 5/64″ Point Length, 6″ OAL
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.3125″ Dia, 1.625″ LOC, 4 Flute, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.175″ OD, 4.5″ Free Length 0.177″ Wire Dia, 118.221 lb Max Load, 92.438 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/64'' Dia, 1/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Pressure Gauge
• Retrieving Tool: Magnetic 5 lb Pull Capacity
• Compression Spring: 0.764″ OD, 9″ Free Length 0.125″ Wire Dia, 91.819 lb Max Load, 31.561 lb/in Spring Rate, Music Wire
• Compression Spring: 1.939″ OD, 4.25″ Free Length 0.177″ Wire Dia, 101.207 lb Max Load, 42.279 lb/in Spring Rate, Music Wire
• Chamfer Mill: 6 mm Dia, 4 Flutes, Solid Carbide, Corner Chamfer End 57 mm OAL, 6 mm Shank Dia, Nano-Si Coated
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 1/32'' Dia, 0.045'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.998″ OD, 8″ Free Length 255.902 lb Max Load, 75.186 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Hook & Loop; Shape: Roll; Tape Width: 1.00 in; Color: Black; Roll Length (yd): 10.00; Component Type: Hook & Loop
• Ball End Mill: 0.3438″ Dia, 1″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.01″ Dia, 0.015″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Screw Machine Length Drill Bit: 0.0295″ Dia, 0 °, Solid Carbide EgiAs Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5700
• Screw Machine Length Drill Bit: 0.0315″ Dia, 0 °, Solid Carbide EgiAs Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5700
• Square End Mill: 1/64'' Dia, 0.023'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Screw Machine Length Drill Bit: 0.0158″ Dia, 0 °, Solid Carbide EgiAs Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5700
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Semi-Bottoming, 7GX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D9 & D10, Series 4626
• Boring Bar: 5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 58.10 mm OAL, 0.08 mm Corner Radius
• Screw Machine Length Drill Bit: 0.1719″ Dia, 135 °, Solid Carbide TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• 9 Piece, 1/8″ Character Steel Stamp Set Figures, Standard
• Boring Bar: 5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 58.10 mm OAL, 0.15 mm Corner Radius
• Hook & Loop; Shape: Roll; Tape Width: 1.00 in; Color: Black; Roll Length (yd): 10.00; Component Type: Hook & Loop
• Boring Bar: 5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 58.10 mm OAL, 0.05 mm Corner Radius
• Boring Bar: 5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 58.10 mm OAL, 0.15 mm Corner Radius
• Boring Bar: 5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 58.10 mm OAL, 0.05 mm Corner Radius
• Spiral Flute Tap: M3 x 0.50, Metric, 2-3 P, 6HX Class of Fit, Powdered Metal & High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, D3
• Best Nickel Key Blank
• FRL Combination Unit: 1/2 NPT, 1 Pc Filter/Regulator
• TPMT331EGU AC8035P Carbide Turning Insert Absotech Finish, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 60° Included Angle, Series AC8000P
• TPMT331EGU AC8025P Carbide Turning Insert Absotech Finish, 0.6496″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 60° Included Angle, Series AC8000P
• Screw Machine Length Drill Bit: 0.1695″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 206
• 1/16″ Diam 270° Wrap Angle 0.053″ LOC 2-Flute AlTiN Finish Undercut End Mill 1/8″ Shank Diam, 2″ OAL, 0.031″ Radius, Solid Carbide
• Square End Mill: 0.04'' Dia, 0.325'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• DNMG432-XM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 55° Triangle
• Grooving Insert: GMG6020080MS KW10, Solid Carbide Co & WC Finish, Neutral, 6 mm Cutting Width, 30 mm Max Depth, Series KGM
• DNMG432-XF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 55° Diamond
• Corner Radius End Mill Head: 5/16″ Dia, 13/16″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• DNMG431L-K 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, LH, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 55° Triangle
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• DNMG432L-K 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, LH, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 55° Triangle
• Micro Boring Bar: 3 mm Min Bore, 11 mm Max Depth, Right Hand Cut, Carbide 3.90 mm Shank Dia, 30.80 mm OAL, 0.2 mm Corner Radius
• Turning Insert: DNMG 15 04 08-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Cargo Handling, Control Devices; Load Capacity (Lb.): 85; Material: Nylon; Net Material: Nylon; Pulling Capacity: 85 lb; Cargo Net Shape: Rectangle; Color: Black; Mat: Nylon; Material: Nylon; Type: Cargo Net; Type: Cargo Net; Product Type: Cargo Net; Load
• Turning Insert: DNMG 15 04 04-MF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Screw Machine Length Drill Bit: 0.3579″ Dia, 130 °, Cobalt Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 329
• Turning Insert: DNMG 15 04 08-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-MR (ISO P)
• FRL Combination Unit: 1/2 NPT, 1 Pc Filter/Regulator
• White Double-Sided Urethane Foam Tape: 1″ Wide, 62.5 mil Thick, Acrylic Adhesive
• Turning Insert: DNMG 15 04 08-MF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Square End Mill: 15/32'' Dia, 1-1/4'' LOC, 1/2'' Shank Dia, 3'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Turning Insert: DNMG 15 04 08-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-PMC
• Jobber Length Drill Bit: 0.113″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Straight Flutes Tap: Metric Coarse, 3 Flutes, Plug, 6H, High Speed Steel, TiN Finish 5/8″ Thread Length, 1-15/16″ OAL, Right Hand, D3, Series 757
• Square End Mill: 3/16'' Dia, 0.57'' LOC, 3/16'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Downcut Flute, 40 ° Helix, RH Cut, RH Flute
• Turning Insert: DNMG 15 04 16-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series DNMG-MF (ISO P)