Products

• Grooving Insert: GDM4020GL PR1215, Solid Carbide Megacoat, Neutral, 4 mm Cutting Width, 25.5 mm Max Depth, Series KGD
• Turning Insert: CNMG332ESW T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Compression Spring: 2.585″ OD, 5.25″ Free Length 0.225″ Wire Dia, 106.141 lb Max Load, 43.392 lb/in Spring Rate, Stainless Steel
• Turning Insert: WNMG332ETM T9215, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Trigon, Series WNMG
• Grooving Insert: GDM4020GL PR1215, Solid Carbide Megacoat, Neutral, 4 mm Cutting Width, 25.5 mm Max Depth, Series KGD
• Compression Spring: 1.175″ OD, 4″ Free Length 0.098″ Wire Dia, 24.557 lb Max Load, 10.862 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GDM4020 PR1215, Solid Carbide Megacoat, Neutral, 4 mm Cutting Width, 11 mm Max Depth, Series KGD
• Turning Insert: CNMG332ESW T9215, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Compression Spring: 1.175″ OD, 8″ Free Length 0.177″ Wire Dia, 118.221 lb Max Load, 50.124 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 1.939″ OD, 6.25″ Free Length 0.207″ Wire Dia, 112.083 lb Max Load, 43.058 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 13.08; Load Capacity: 100 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 8.08; Extens
• Compression Spring: 0.823″ OD, 2″ Free Length 0.125″ Wire Dia, 65.649 lb Max Load, 114.355 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.115″ OD, 3.75″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 42.374 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.025″ Dia, 1/8″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 13.08; Load Capacity: 40 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 8.08; Extensi
• Compression Spring: 0.823″ OD, 1.25″ Free Length 0.162″ Wire Dia, 128.13 lb Max Load, 712.172 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.047″ Dia, 0.07″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 13.08; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 8.08; Extensi
• Ball End Mill: 0.2187″ Dia, 0.33″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 0.999″ OD, 4.5″ Free Length 0.092″ Wire Dia, 24.145 lb Max Load, 9.882 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 4.5″ Free Length 0.162″ Wire Dia, 111.271 lb Max Load, 54.197 lb/in Spring Rate, Music Wire
• Compression Spring: 2.468″ OD, 9″ Free Length 0.225″ Wire Dia, 110.933 lb Max Load, 26.936 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 3″ Free Length 0.192″ Wire Dia, 177.359 lb Max Load, 171.855 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 5/16″ Dia, 5/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Compression Spring: 1.821″ OD, 9″ Free Length 0.162″ Wire Dia, 84.002 lb Max Load, 15.733 lb/in Spring Rate, Music Wire
• Square End Mill: 3/8'' Dia, 1'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2031
• Corner Radius End Mill: 5/16″ Dia, 5/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 5/16″ Dia, 5/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Compression Spring: 1.41″ OD, 4.5″ Free Length 0.162″ Wire Dia, 106.934 lb Max Load, 49.885 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 5/16″ Dia, 5/8″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Compression Spring: 1.469″ OD, 9.5″ Free Length 50.145 lb Max Load, 8.445 lb/in Spring Rate, Music Wire
• Square End Mill: 1/4'' Dia, 1'' LOC, 1/4'' Shank Dia, 3'' OAL, 7 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 36 ° Helix, RH Cut, RH Flute, Series VGM7
• Milling Insert: WSP45S, Solid Carbide N/A Finish,
• Compression Spring: 1.469″ OD, 2.5″ Free Length 0.207″ Wire Dia, 201.95 lb Max Load, 244.203 lb/in Spring Rate, Music Wire
• Milling Insert: WSP45S, Solid Carbide N/A Finish,
• Milling Insert: WSP45S, Solid Carbide N/A Finish,
• Milling Insert: WSP45S, Solid Carbide N/A Finish,
• Compression Spring: 1.586″ OD, 2.375″ Free Length 0.207″ Wire Dia, 188.324 lb Max Load, 219.222 lb/in Spring Rate, Music Wire
• Rigid Top Plate Caster: Thermoplastic Rubber, 2-15/16″ Wheel Dia, 15/16″ Wheel Width, 165 lb Capacity, 3-15/16″ OAH 2.375″ Plate Length, 2.38″ Plate Width, No Brake
• Ball End Mill: 0.3594″ Dia, 1″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Milling Insert: WSP45S, Solid Carbide N/A Finish,
• Milling Insert: WSP45S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Square End Mill: 25/64'' Dia, 5/8'' LOC, 7/16'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Screw Machine Length Drill Bit: 0.196″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Weatherstripping; Type: Head & Jamb; Length (Decimal Inch): 42.0; 42; PSC Code: 5640; Thickness: 3/8; Seal Insert: Wool Pile; Length: 42; Finish/Coating: Mill Finish Alum.; Overall Length: 42.0; 42; Weatherstripping Type: Head & Jamb
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Milling Insert: WSP45S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Socket Extensions; Tool Type: WILLIAMS FLEXTENSION; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 3 mm Cutting Width, 5 mm Max Depth
• Compression Spring: 0.823″ OD, 5.25″ Free Length 0.085″ Wire Dia, 23.393 lb Max Load, 8.719 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.0409″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Jobber Length Drill Bit: 0.0413″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Compression Spring: 0.588″ OD, 4″ Free Length 0.092″ Wire Dia, 39.417 lb Max Load, 31.215 lb/in Spring Rate, Stainless Steel
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Boring Bar: 5.5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 58.20 mm OAL, 0.05 mm Corner Radius
• Jobber Length Drill Bit: 0.0433″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Boring Bar: 5.5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 58.20 mm OAL, 0.08 mm Corner Radius
• Jobber Length Drill Bit: 0.1004″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Boring Bar: 5.5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 58.20 mm OAL, 0.15 mm Corner Radius
• Jobber Length Drill Bit: 0.1299″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Boring Bar: 5.5 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 58.20 mm OAL, 0.15 mm Corner Radius
• Grooving Insert: GM44D CR9025, Solid Carbide TiCN & TiN Finish, Left Hand, 4 mm Cutting Width, 25 mm Max Depth, Series KGM
• Compression Spring: 1.175″ OD, 7″ Free Length 0.135″ Wire Dia, 76.651 lb Max Load, 21.914 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.0215″ Dia, 1″ OAL, 1/2″ Flute Length, Straight Shank, High Speed Steel 3 Flute
• Abrasive Belt: 3" Wide, 21" OAL, 36 Grit, Aluminum Oxide
• Compression Spring: 0.764″ OD, 2.625″ Free Length 0.112″ Wire Dia, 52.54 lb Max Load, 62.142 lb/in Spring Rate, Stainless Steel
• Milling Insert: KDMB12M0ERHC, KCPK25, Cast Iron & Steel N/A Finish, 0.4724″ OAW
• Hook & Loop; Shape: Roll; Roll Length (yd): 3.33; Roll Length (Feet): 10.00; Component Type: Hook & Loop; Form: Continuous Roll
• Compression Spring: 0.823″ OD, 1.75″ Free Length 0.135″ Wire Dia, 80.273 lb Max Load, 189.5 lb/in Spring Rate, Stainless Steel
• Milling Insert: KDMB0500M0ERHC, KCPK25, Cast Iron & Steel N/A Finish, 0.5000″ OAW
• Electromagnet Lock Accessories; Type: Dual Technology Key Fob Credential; For Use With: Access Control Systems; Material: Glass Filled Polypropylene; Material: Glass Filled Polypropylene; For Use With: Access Control Systems; Type: Dual Technology Key Fob
• Corner Radius End Mill: 0.2188″ Dia, 1/2″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 50 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM3F
• Socket-Mount Leveling Pads & Mounts; Type: Long Stem Leveling Glide; Thread Size: M10; Base Diameter (Inch): 1-17/64; Load Capacity (Lb.): 440.000; Load Capacity (kg): 440.00; Overall Length (mm): 96.0000; Stud Length (mm): 80.00; Thread Length: 1.5000; S
• Compression Spring: 0.999″ OD, 5.75″ Free Length 0.085″ Wire Dia, 19.46 lb Max Load, 5.848 lb/in Spring Rate, Stainless Steel
• Hand Hex & Torx Bit Sockets; Socket Type: Torx Bit Socket; Drive Size (Fractional Inch): 1/2; Torx Size: T50; Bit Length (mm): 25.00
• Compression Spring: 1.351″ OD, 5.25″ Free Length 0.105″ Wire Dia, 25.906 lb Max Load, 8.424 lb/in Spring Rate, Stainless Steel
• ADMM 150308-88 IC20 Carbide Milling Insert Uncoated, 0.5906″ Long x 0.1252″ Thick x 0.3748″ Wide
• Chucking Reamer: 0.0925″ Dia, 2″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Cord Stock; Shape: Round; System of Measurement: Inch; Diameter (Decimal Inch): 0.1030; Tensile Strength (psi): 725; Coil Length (Feet): 20; Durometer: 70; Maximum Temperature (F): 350.000; Durometer (Shore A): 70A; Standard; Hardness: Standard
• Compression Spring: 1.998″ OD, 5″ Free Length 0.162″ Wire Dia, 76.872 lb Max Load, 24.883 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 3″ Free Length 0.192″ Wire Dia, 164.335 lb Max Load, 142.755 lb/in Spring Rate, Music Wire
• Compression Spring: 1.88″ OD, 3.75″ Free Length 0.177″ Wire Dia, 104.224 lb Max Load, 50.995 lb/in Spring Rate, Music Wire
• Compression Spring: 1.58″ OD, 2.5″ Free Length 0.207″ Wire Dia, 192.933 lb Max Load, 210 lb/in Spring Rate, Music Wire
• Compression Spring: 1.645″ OD, 8″ Free Length 0.135″ Wire Dia, 55.744 lb Max Load, 10.906 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.015″ Dia, 0.023″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 15/32″ LOC, 0.02″ Radius, 6 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 5/16″ Dia, 15/32″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Ball End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, nACo Coated, Single End, Series 1032
• Ball End Mill: 0.1875″ Dia, 1″ LOC, 6 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 36 ° Helix, AlTiN Nano Coated, Single End
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Turning Insert: CPMT21.51PC TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.2540″ Long, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CPMT
• Rust Inhibitor: RO-32, 5 gal Pail
• Square End Mill: 1/16'' Dia, 5/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: VPGT1003015-FR WUU7620, Solid Carbide Uncoated Finish, Right Hand, 1/4″ Inscribed Circle, 0.0059″ Corner Radius, 35.0 &deg N/A Diamond, Series VPGT
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Fluid: PERKOOL 5250TF, Liquid, 55 gal Drum
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Kyocera TPK 32PDFR KW10 Grade Uncoated Carbide, Triangle, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (N) Non-Ferrous Metals and (K) Gray Cast Iron, (S) Titanium Alloy
• Open End Wrench: 8 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Chamfer Mill: 0.375″ Dia, 5 Flutes, Solid Carbide 4″ OAL, 3″ Shank Dia, AlTiN Coated
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.085″ Dia, 0.255″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 1/4'' Dia, 1-1/2'' LOC, 1/4'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Open End Wrench: 10 mm, Double End Head 103.8 mm OAL, Vanadium Steel, Chrome-Plated
• Corner Radius End Mill: 0.025″ Dia, 0.075″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.125″ Dia, 0.187″ LOC, 3 Flute, Solid Carbide 4″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/8″ Dia, 5″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Spiral Point Tap: M4 x 0.7, M & Metric, 3 Flutes, Plug, 6HX, PM Cobalt, GLT-1 Finish 63 mm OAL, Right Hand, D4
• Corner Radius End Mill: 0.025″ Dia, 0.075″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: CCMT21.52MT TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.2540″ Long, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• CCMT21.51FG TT5100 Carbide Turning Insert 1/64″ Corner Radius, 80° Diamond
• Compression Spring: 1.528″ OD, 2.5″ Free Length 0.207″ Wire Dia, 194.85 lb Max Load, 223.508 lb/in Spring Rate, Music Wire
• Square End Mill: 1/8'' Dia, 1/2'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, ALtima Blaze Finish, Helical Flute, 38 & 41 ™ Variable Helix, Centercutting, RH Cut, RH Flute
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Turning Insert: CCMT21.51FG TT8020, Solid Carbide TiCN Finish, Neutral, 0.2540″ Long, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Turning Insert: CCMT21.50.5FA TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.2540″ Long, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Corner Radius End Mill: 1/8″ Dia, 3/4″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Compression Spring: 1.116″ OD, 1.625″ Free Length 0.135″ Wire Dia, 60.947 lb Max Load, 104.526 lb/in Spring Rate, Stainless Steel
• Turning Insert: CCMT21.51FA TT8020, Solid Carbide TiCN Finish, Neutral, 0.2540″ Long, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• O-Ring: 0.984″ ID x 1.262″ OD, 0.139″ Thick, Dash 214, Nitrile Butadiene Rubber Round Cross Section
• Compression Spring: 1.175″ OD, 5″ Free Length 0.092″ Wire Dia, 20.675 lb Max Load, 6.967 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.705″ OD, 8.5″ Free Length 0.135″ Wire Dia, 91.644 lb Max Load, 51.805 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.056″ OD, 7″ Free Length 0.162″ Wire Dia, 55.529 lb Max Load, 14.535 lb/in Spring Rate, Stainless Steel
• 50' Bungee Cord with No End 1/4″ Diam, Polyurethane, Black
• Compression Spring: 0.764″ OD, 2.125″ Free Length 0.125″ Wire Dia, 70.117 lb Max Load, 128.073 lb/in Spring Rate, Stainless Steel
• Electromagnet Lock Accessories; Type: Plug-In Transformer; For Use With: Low Voltage Electrical Equipment; Material: Plastic; Material: Plastic; For Use With: Low Voltage Electrical Equipment; Type: Plug-In Transformer; Accessory Type: Plug-In Transformer
• Compression Spring: 0.823″ OD, 1.5″ Free Length 0.148″ Wire Dia, 101.794 lb Max Load, 354.956 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.1575″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Turning Insert: VBMT331CM T515, Solid Carbide TiCN & Al2O3 Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMT
• Chucking Reamer: 0.1575″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 & 41 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Ball End Mill: 0.2031″ Dia, 0.625″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• White Double-Sided Urethane Foam Tape: 1/2″ Wide, 5 yd Long, 250 mil Thick, Acrylic Adhesive
• Polyester Film Tape: 2″ Wide, 18 yd Long, 3.2 mil Thick 57 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Spiral Flute Tap: M3.50 x 0.60, M, Bottoming, 6H Class of Fit, Cobalt, TiN Finish Right Hand Flute, Right Hand Thread, D4, Series B0513700
• Combo Drill & Countersink: #12, 7/16″ Body Dia, High Speed Steel TiCN Finish, 29/64″ Point Length, 2″ OAL, Right Hand Cut
• Compression Spring: 1.351″ OD, 2.25″ Free Length 0.225″ Wire Dia, 272.973 lb Max Load, 500.991 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.94″ OD, 8″ Free Length 0.135″ Wire Dia, 71.315 lb Max Load, 26.352 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.125″ Dia, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Compression Spring: 0.294″ OD, 3.75″ Free Length 0.029″ Wire Dia, 3.136 lb Max Load, 1.473 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.75″ Dia, 5 Flute, Solid Carbide 2″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Ball End Mill: 0.06″ Dia, 0.09″ LOC, 3 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Single End
• BDMT170424ERJT PR1225 Carbide Milling Insert Megacoat Finish, 4.9mm Thick x 9.6mm Wide
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, Bright/Uncoated
• TBGT520.5RFY-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.2717″ Long, 0.1563″ Inscribed Circle, 0.0079″ Corner Radius, 0.0626″ Thick, 60° Included Angle, Series AC5000S
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.024″ Dia, 0.072″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• TBGT520RFY-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.2717″ Long, 0.1563″ Inscribed Circle, 0.0039″ Corner Radius, 0.0626″ Thick, 60° Included Angle, Series AC5000S
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• TBGT520LFY-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.2717″ Long, 0.1563″ Inscribed Circle, 0.0039″ Corner Radius, 0.0626″ Thick, 60° Included Angle, Series AC5000S
• Corner Radius End Mill: 0.022″ Dia, 0.066″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• TBGT521RFY-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.2717″ Long, 0.1563″ Inscribed Circle, 0.0157″ Corner Radius, 0.0626″ Thick, 60° Included Angle, Series AC5000S
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• TBGT521LFY-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.2717″ Long, 0.1563″ Inscribed Circle, 0.0157″ Corner Radius, 0.0626″ Thick, 60° Included Angle, Series AC5000S
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• TBGT521RFY-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.2717″ Long, 0.1563″ Inscribed Circle, 0.0157″ Corner Radius, 0.0626″ Thick, 60° Included Angle, Series AC5000S
• Spiral Flute Tap: M3.50 x 0.60, Metric Coarse, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal, AlTiN Finish 0.3″ Thread Length, 2″ OAL, Right Hand Flute, Right Hand Thread, D3, Series 718
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Ball End Mill: 0.013″ Dia, 0.019″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.015″ Dia, 0.023″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.025″ Dia, 0.075″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• O-Ring: 4″ ID x 4.87″ OD, 1/4″ Thick, Ethylene Propylene Diene Monomer Round Cross Section
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 1.88″ OD, 6.25″ Free Length 0.207″ Wire Dia, 115.379 lb Max Load, 45.58 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.291″ OD, 4.25″ Free Length 0.192″ Wire Dia, 78.528 lb Max Load, 37.763 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.351″ OD, 3″ Free Length 0.225″ Wire Dia, 193.172 lb Max Load, 307.513 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.25″ Dia, 0.75″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Jobber Length Drill Bit: 0.1378″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Jobber Length Drill Bit: 0.1339″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Glass Cloth Tape; Width (Inch): 1; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 5.0000; Tensile Strength (Lb./Inch): 120.00; Maximum Operating Temperature (F): 500.000
• Spiral Point Tap: M14 x 2, Metric Coarse, 3 Flutes, Plug, 6H, High Speed Steel, Oxide Finish 1-21/32″ Thread Length, Right Hand, D7, Series 142
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D4 & D5, Series 4636
• Compression Spring: 2.409″ OD, 9″ Free Length 0.225″ Wire Dia, 113.515 lb Max Load, 28.023 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0193; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill: 1/8″ Dia, 1/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Square End Mill: 0.0984'' Dia, 0.1181'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Barrier Posts; Post Type: Standard Post; Post Material: Polyethylene, Plastic; Base Material: Plastic; Surface Style: Solid Color
• Turning Insert
• Square End Mill: 13mm LOC, 4mm Shank Dia, 57mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Square End Mill: 9mm LOC, 3mm Shank Dia, 57mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Modified Bottoming, 6H Class of Fit, TiAlN Finish 0.827″ Thread Length, 2.4803″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Spiral Flute Tap: M5 x 0.80, Metric, 3 Flute, Modified Bottoming, 6H Class of Fit, TiAlN Finish 1.024″ Thread Length, 2.756″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Square End Mill: 15mm LOC, 5mm Shank Dia, 57mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Modified Bottoming, 6H Class of Fit, TiAlN Finish 1.26″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Compression Spring: 0.294″ OD, 4.25″ Free Length 0.03″ Wire Dia, 3.451 lb Max Load, 1.46 lb/in Spring Rate, Stainless Steel
• Polytetrafluroethylene Film Tape: 2″ Wide, 5 yd Long, 2 mil Thick 20 Lb/In Tensile Strength, Acrylic Adhesive, 500 ° F
• Square End Mill: 16mm LOC, 6mm Shank Dia, 57mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Milling Insert: XOGX 203040-MF4 CTPP216, CTPP216, Solid Carbide N/A Finish, 1.0000″ OAW
• Corner Radius End Mill: 3 Flutes, Solid Carbide 41, 43 & 45 ° Helix, nano-Si Coated, Corner Chamfer End, Centercutting, Series 6797
• O-Ring: 2-1/8″ ID x 2-3/8″ OD, 1/8″ Thick, Dash 227, HNBR Round Cross Section
• Series EP-460 Gear Oil: 55 gal Drum, ISO 460
• Screw Machine Length Drill Bit: 0.1015″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.5″ Dia, 2 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, Uncoated, Single End, Series 2014
• Square End Mill: 3/8'' Dia, 1-1/4'' LOC, 3/8'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 36 ° Variable Helix, Centercutting, RH Cut, RH Flute, Series CoroMill Dura
• O-Ring: 1.6″ ID x 1.56″ OD, 1/4″ Thick, Polytetrafluroethylene Envelope Nitrile Butadiene Rubber Round Cross Section
• Chucking Reamer: 0.1455″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Polyethylene Film Tape: 4″ Wide, 5 yd Long, 9.5 mil Thick 15 Lb/In Tensile Strength, Rubber Adhesive, 170 ° F
• Compression Spring: 1.469″ OD, 3.25″ Free Length 38.293 lb Max Load, 22.337 lb/in Spring Rate, Stainless Steel
• Milling Insert: MH20-060320M-M50 1130, 1130, Solid Carbide N/A Finish,
• Chucking Reamer: 0.1445″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Milling Insert: MH20-060320M-M20 4340, 4340, Solid Carbide N/A Finish,
• Combo Drill & Countersink: #1, 1/8″ Body Dia, 118 ™, High Speed Steel Bright (Polished) Finish, 3/64″ Point Dia, 3/64″ Point Length, 6″ OAL
• Milling Insert: MH20-060320M-M20 1010, 1010, Solid Carbide N/A Finish,
• Milling Insert: MH20-060320M-M50 4340, 4340, Solid Carbide N/A Finish,
• Chucking Reamer: 0.015″ Dia, 1-1/2″ OAL, 3/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Ball End Mill: 0.1562″ Dia, 0.562″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, Uncoated, Single End
• Milling Insert: MH20-060320M-M20 1130, 1130, Solid Carbide N/A Finish,
• Square End Mill: 13/64'' Dia, 0.312'' LOC, 2.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/4'' Dia, 3/8'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Chucking Reamer: 0.0185″ Dia, 1-1/2″ OAL, 3/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Square End Mill: 1/4'' Dia, 1'' LOC, 1/4'' Shank Dia, 4'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Plate-Type Vibration Mounts; Shape: Diamond; Load Capacity (Lb.): 6.000; Color Code: Yellow
• Compression Spring: 0.823″ OD, 9.5″ Free Length 0.125″ Wire Dia, 65.649 lb Max Load, 21.635 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Tapered End Mill: 20 ° per Side, 5/16″ LOC, 3 Flutes, Solid Carbide, Square End 5/16″ Shank Dia, 2-1/2″ OAL, Uncoated, Series Miniature End Mills - Tapered - Square
• Compression Spring: 1.88″ OD, 6.75″ Free Length 0.162″ Wire Dia, 60.499 lb Max Load, 17.253 lb/in Spring Rate, Stainless Steel
• 120° 1/4″ Diam 2-1/2″ OAL 2-Flute Solid Carbide Spotting Drill Bright/Uncoated, 3/4″ Flute Length, 1/4″ Shank Diam
• Spiral Flute Tap: MF10 x 1.25, MF, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115