Products

• Corner Radius End Mill: 5/8″ Dia, 1-5/8″ LOC, 0.04″ Radius, 3 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Back Boring Bar: 0.2756″ Min Bore, 2.0472″ Max Depth, Left Hand Cut, Carbide 3.0315″ OAL, 0.0079″ Corner Radius
• Back Boring Bar: 0.2756″ Min Bore, 2.0472″ Max Depth, Right Hand Cut, Carbide 3.0315″ OAL, 0.0079″ Corner Radius
• Spiral Flute Tap: M14 x 1.50, Metric, 3 Flute, Modified Bottoming, VC-10, V Finish Right Hand Flute, Right Hand Thread, D6, Series 348Ti
• Corner Radius End Mill: 5/16″ Dia, 0.469″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 15/32″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Hydraulic Dampers & Gas Springs; Type: Mechanical Compression Spring Strut; Material: Steel; Extended Length: 36.82; Load Capacity: 105; Stroke: 12.0000; Rod Diameter (Decimal Inch): 14.0 mm; 0.550; 0.55 in; Tube Diameter: 1.1 in; End Fitting Connection:
• Corner Radius End Mill: 3/8″ Dia, 15/32″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 3/8″ Dia, 15/32″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 3/8″ Dia, 15/32″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• UHMW Film Tape: 3/4″ Wide, 5 yd Long, 5 mil Thick 40 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Ball End Mill: 0.1875″ Dia, 0.281″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Nano Coated, Single End
• Milling Insert: KDMB16M0ERGP, KCPK10, Cast Iron & Steel N/A Finish, 0.6300″ OAW
• Spiral Flute Tap: 1/2-13, UNC, 3 Flute, Modified Bottoming, VC-10, V Finish 0.614″ Thread Length, 4.33″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 317
• Spiral Flute Tap: 1/2-20, UNF, 3 Flute, Modified Bottoming, VC-10, V Finish 0.614″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 317
• Glass Cloth Tape; Width (Inch): 1; Material Type: PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 5.6000; Tensile Strength (Lb./Inch): 100.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature
• Spiral Flute Tap: 1/2-20, UNF, 3 Flute, Modified Bottoming, VC-10, V Finish 0.614″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 317
• Spiral Flute Tap: 1/2-13, UNC, 3 Flute, Modified Bottoming, VC-10, V Finish 0.614″ Thread Length, 4.33″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 317
• Countersinks; Head Diameter (mm): 25.00; Included Angle: 90; Number Of Flutes: 3; Tool Material: Cobalt Steel; Cutting Direction: Right Hand; Minimum Cutting Diameter (mm): 3.80; Shank Diameter (mm): 10.00; Overall Length (mm): 67; Shank Type: Straight; T
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1/2; Length (yd): 5.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 4
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 4; Length (yd): 5.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 468
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1; Length (yd): 5.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 468
• Work Gloves: Impacto Size Small, Not Lined, Nylon, VEP & Grain Leather, General Purpose
• Roughing End Mill
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 0.375″ Dia, 1″ LOC, 5 Flute, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Remote Display Linear Gages; Maximum Measurement (Inch): 1; Maximum Measurement (mm): 25; Barrel Diameter (mm): 0.3750; Display Type: Digital LCD; Minimum Measurement (mm): 0; Accuracy (Decimal Inch): 0.0016; Maximum Measurement (Decimal Inch): 1; Minimum
• Corner Radius End Mill Head: 3 Flutes Solid Carbide
• Screw Machine Length Drill Bit: 0.4531″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Electronic Outside Micrometer: 4 to 5″, Solid Carbide Measuring Face 0.00005″ Resolution, Ratchet Stop Thimble
• 5'6″ x 1/4″ x 150' Heavy-Duty Fire-Retardant Multi-Purpose Net Polyethylene, Orange
• Duct Tape: 6″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Black Double-Sided Polyethylene Foam Tape: 6″ Wide, 5 yd Long, 62 mil Thick, Acrylic Adhesive
• Duct Tape: 4″ Wide, 7.2 mil Thick, Aluminum Foil Acrylic Adhesive, 59 lb/in Tensile Strength
• Square End Mill: 1/4'' Dia, 1-1/4'' LOC, 1/4'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, ALtima Blaze Finish, Helical Flute, 38 & 41 ™ Variable Helix, Centercutting, RH Cut, RH Flute
• Clear Double-Sided Acrylic Tape: 2″ Wide, 5 yd Long, 20 mil Thick, Acrylic Adhesive
• Drill Mill: 1/2″ Dia, 1″ LOC, 3 Flutes, 90 ° Point, Solid Carbide 3″ OAL, 1″ Shank Dia, Uncoated
• Gray Double-Sided Foam Tape: 1″ Wide, 2 yd Long, 25 mil Thick, Acrylic Adhesive
• Spiral Point Tap: 1/4-20, UNC, 3 Flutes, Gunnose, 2B, High Speed Steel, TiCN Finish 0.591″ Thread Length, 3.15″ OAL, Right Hand, Series 22217
• Door Closer Accessories; For Use With: SEM7810 Series Door Closers; Finish/Coating: Sprayed Aluminum; For Use With: SEM7810 Series Door Closers
• Door Closer Accessories; For Use With: SEM7810 Series Door Closers; Finish/Coating: Sprayed Aluminum; For Use With: SEM7810 Series Door Closers
• CNGA432S0520FWH 7135 CBN Turning Insert Uncoated, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 3/16″ Thick
• Spiral Point Tap: 1/2-20, UNF, 3 Flutes, Plug, VC-10 Finish 0.921″ Thread Length, 3.93″ OAL, Right Hand, H5, Series 316
• Spiral Point Tap: 1/2-13, UNC, 3 Flutes, Plug, VC-10 Finish 0.921″ Thread Length, 4.33″ OAL, Right Hand, H5, Series 316
• Hexagon Broaches; Hex Size: 0.125 in; Coated: Uncoated; Broach Coating: Uncoated; Overall Length (Decimal Inch): 1.25 in; Overall Length (Inch): 1.25 in; Overall Length: 1.25 in
• Way Oil: WL-46, 5 gal Pail
• Spiral Point Tap: 1/2-13, UNC, 3 Flutes, Plug, VC-10 Finish 0.921″ Thread Length, 4.33″ OAL, Right Hand, H3, Series 316
• AW-46 Machine Oil: ISO 46, 55 gal
• Hexagon Broaches; Hex Size: 4 mm; Coated: Uncoated; Broach Coating: Uncoated; Overall Length (Decimal Inch): 1.25 in; Overall Length (Inch): 1.25 in; Overall Length: 1.25 in
• Spiral Point Tap: 1/2-20, UNF, 3 Flutes, Plug, VC-10 Finish 0.921″ Thread Length, 3.93″ OAL, Right Hand, H3, Series 316
• Hexagon Broaches; Hex Size: 3 mm; Coated: Uncoated; Broach Coating: Uncoated; Overall Length (Decimal Inch): 1.25 in; Overall Length (Inch): 1.25 in; Overall Length: 1.25 in
• AW-100 Machine Oil: ISO 100, 5 gal
• Hexagon Broaches; Hex Size: 2 mm; Coated: Uncoated; Broach Coating: Uncoated; Overall Length (Decimal Inch): 1.25 in; Overall Length (Inch): 1.25 in; Overall Length: 1.25 in
• Hexagon Broaches; Hex Size: 1.5 mm; Coated: Uncoated; Broach Coating: Uncoated; Overall Length (Decimal Inch): 1.25 in; Overall Length (Inch): 1.25 in; Overall Length: 1.25 in
• Hexagon Broaches; Hex Size: 0.0625 in; Coated: Uncoated; Broach Coating: Uncoated; Overall Length (Decimal Inch): 1.25 in; Overall Length (Inch): 1.25 in; Overall Length: 1.25 in
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• Turning Insert: VCGW332TN012CA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VNGA332FN_A4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Turning Insert: VCGW331TN012CA5, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Spiral Flute Tap: 1/2-20, UNF, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-8 Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H5, Series CU50S800
• Spiral Flute Tap: 1/2-20, UNF, 4 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H3, Series CU50C310
• Spiral Flute Tap: 1/2-20, UNF, 2 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-8 Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H3, Series CU50S810
• Turning Insert: CCGW3252TN015DB3Q, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3251TN015DB3Q, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2152TN014EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Corner Radius End Mill: 0.093″ Dia, 1/2″ LOC, 0.005″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: CCGW2151TN014EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2155SN015EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Back Chamfers; Cutter Head Diameter (Decimal Inch): 0.1875 in; Included Angle: 90.00; Number of Flutes: 5; Chamfer Width (Decimal Inch): 0.0330 in; Chamfer Width: 0.0330 in; Back Chamfer Material: Solid Carbide; Overall Length (Inch): 2.00; Coated: Coated
• Turning Insert: CCGW3255SN015EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2151SN015EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3251SN009BB3Q, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Ball End Mill: 0.093″ Dia, 0.139″ LOC, 3 Flute, Solid Carbide 4″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: CCGW3252SN011CB3Q, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2155TN015DB3Q, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: VCGW221TN015DB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW331TN015DB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: CCGW21.52FN_B3 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2155SN009DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3251SN009DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3255SN009DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: VCGW331SN016DB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW222TN017EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW221SN018EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: CCGW3252SN009BB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2151SN011CB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2155SN009BB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2151SN009BB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2151TN014FB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW3251SN018FB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2152TN014FB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252TN014FB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3255SN017GB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2152SN017GB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: VCGW221SN011CB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Glass Cloth Tape; Width (Inch): 2; Material Type: PTFE; Color: Black; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 7.0000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• Turning Insert: VCGW331SN011CB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW332EN_B3 CTBS20C, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: DCGW2151SN017GB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251SN016FB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Spiral Flute Tap: M5 x 0.80, Metric, 3 Flute, 2-3 P, 6HX Class of Fit, TiN Finish Right Hand Flute, Right Hand Thread, D4, Series Enorm
• Turning Insert: CCGW3252TN009DB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Turning Insert: CCGW2155TN011EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3251TN011EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3255TN011EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2151TN011EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2152TN011EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3252SN009EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2152TN014FB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Turning Insert: CCGW3252TN014FB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Semi-Bottoming, 2B Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Turning Insert: CCGW2155ENB3Q CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2155FNB3Q CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 0.0157″ Dia, 0.0236″ LOC, 4 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Turning Insert: CCGW2151SN016FB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Ball End Mill: 0.5″ Dia, 4 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Turning Insert: CCGW3251SN016FB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2151SN009BB3Q, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Spiral Point Tap: #5-40, UNC, 2 Flutes, Gunnose, 2B, High Speed Steel, TiCN Finish 0.394″ Thread Length, 2.205″ OAL, Right Hand, Series 22217
• Turning Insert: CCGW3251SN017GB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3255SN017GB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2152SN017GB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3252SN017GB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW32.52ENB3Q CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2151SN011CB3Q, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3252SN011CB3Q, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• UHMW Film Tape: 3/4″ Wide, 5 yd Long, 15.2 mil Thick 55 Lb/In Tensile Strength, Rubber Adhesive, 225 ° F
• Turning Insert: CCGW2151TN014EB3Q, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW21.52EN_B3 CTBS20C, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW3252TN014EB3Q, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2152SN018FB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: VCGW221EN_B3 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW222SN011CB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW331SN009DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Spiral Flute Tap: M12 x 1.75, Metric, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish Right Hand Flute, Right Hand Thread, D6, Series 347
• Turning Insert: VCGW222EN_B3 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Spiral Flute Tap: M12 x 1.25, Metric, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish Right Hand Flute, Right Hand Thread, D5, Series 347
• Turning Insert: VCGW332TN014EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Spiral Flute Tap: M12 x 1.50, Metric, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish Right Hand Flute, Right Hand Thread, D6, Series 347
• Turning Insert: VCGW222SN015EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: CCGW2155TN017EB3Q, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW32.52ENB3Q CTBH40C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2155SN016DB3Q, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2155SN009BB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3255SN009CB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW2151SN017GB3Q, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3252TN011EB3Q, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3252SN009DB3Q, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW32.52EN_B3 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW32.51EN_B4 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW3251TN014FB3Q, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW21.52FN_B3 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3252TN014FB3Q, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series CCGW
• Turning Insert: VCGW222SN017GB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW332SN016FB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW222SN016FB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: DCGW3251SN009DB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: VCGW221SN009EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: DCGW2152SN018EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: VCGW331SN009EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: DCGW2152SN016DB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251TN017EB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: VCGW332SN009DB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: DCGW3255TN017EB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: VCGW221TN011EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: DCGW2151TN017EB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252TN017EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2152TN017EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2155TN017EB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252SN016DB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251SN016DB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2151TN015DB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2151SN016DB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252TN015DB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Spiral Flute Tap: M10, Metric, 3 Flute, Modified Bottoming, 6HX Class of Fit, HSS-E-PM, ACN Finish Right Hand Flute, Right Hand Thread, Series MTH
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, ACN Finish Right Hand Flute, Right Hand Thread, Series MTH
• Turning Insert: CCGW2155TN017EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2151TN011EB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2155TN015DB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW2152TN017EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• 1″ Head Diam, 3/8″ Shank Diam, 3 Flute 90° Cobalt Countersink TiN Finish, 2-3/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Turning Insert: DCGW2155TN011EB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252SN011CB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2151SN011CB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: VCGW222EN_B3 CTBH40C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: CCGW3252TN017EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3252SN018EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2155SN009BB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251SN009EB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW2152SN018EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2151SN009EB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW3255SN018EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2155SN009EB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2152SN009EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3255TN011EB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2152TN011EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW3255TN017EB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2151SN009DB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3255SN009DB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2151TN014EB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252TN014EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3255TN014EB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW2152SN009BB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW32.51EN_B3 CTBS20C, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2151TN015DB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW3252TN015DB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2155TN009DB4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW21.5.5ENB4 CTBH40C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW3252SN009BB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW2151SN011CB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW32.5.5ENB4 CTBH40C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Screw Machine Length Drill Bit: 0.242″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Turning Insert: DCGW21.52EN_B3 CTBH40C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: CCGW2151SN009BB3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW2151SN015EB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251SN015EB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251SN018FB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252SN018FB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2152TN014EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251TN014EB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252SN011CB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3255SN011CB4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251TN012CB4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Spiral Flute Tap: 1/2-20, UNF, 4 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.866″ Thread Length, 3.937″ OAL, Right Hand Flute, Right Hand Thread, H5, Series CU50C300
• Spiral Point Tap: 5/8-18, UNF, 4 Flutes, Plug, 2B/3B, Powdered Metal, TiCN Finish 1″ Thread Length, 3-13/16″ OAL, Right Hand, H3, Series 778
• Milling Insert: KDMT2010ERHC, KCPK10, Cast Iron & Steel N/A Finish, 0.7874″ OAW
• Brackets; Type: Compact Bracket; Length (mm): 318.00; Width (mm): 23.00; Height (mm): 159.0000; Load Capacity (Lb.): 55.000; Finish/Coating: Umber; Minimum Order Quantity: Steel; Material: Steel
• Brackets; Type: Compact Bracket; Length (mm): 318.00; Width (mm): 23.00; Height (mm): 159.0000; Load Capacity (Lb.): 55.000; Finish/Coating: Black; Minimum Order Quantity: Steel; Material: Steel
• Brackets; Type: Compact Bracket; Length (mm): 318.00; Width (mm): 23.00; Height (mm): 159.0000; Load Capacity (Lb.): 55.000; Finish/Coating: White; Minimum Order Quantity: Steel; Material: Steel
• Ball End Mill: 0.1969″ Dia, 0.1969″ LOC, 3 Flute, Solid Carbide 60 mm OAL, 6 mm Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4730
• Ball End Mill: 0.1969″ Dia, 0.1969″ LOC, 3 Flute, Solid Carbide 60 mm OAL, 6 mm Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4730
• Ball End Mill: 0.3937″ Dia, 8 Flute, Solid Carbide 72 mm OAL, 10 mm Shank Dia, 35 ° Helix, Altima Xtreme Coated, Single End
• Clear Double-Sided Polyethylene Foam Tape: 1″ Wide, 2 mil Thick, Acrylic Adhesive
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Semi-Bottoming, High Speed Steel-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H11, Series TC117
• Ball End Mill: 0.125″ Dia, 0.188″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.039″ Dia, 0.48″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Ball End Mill: 0.093″ Dia, 0.279″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Electromagnet Lock Accessories; Type: 1-Channel Hand Held Block Code Transmitter; For Use With: Linear Access Receivers & Controllers; Material: Plastic; Material: Plastic; For Use With: Linear Access Receivers & Controllers; Type: 1-Channel Hand Held Blo
• Spiral Point Tap: 3/4-10, UNC & DIN 376, 4 Flutes, Plug, 2B, HSS-E, TiN Finish 30 mm Thread Length, 125 mm OAL, Right Hand, Series TC216
• Woodruff Keyseat Cutter: 0.3125″ Cut Dia, 0.125″ Cut Width, 5/16″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• High-Feed End Mills; Mill Diameter (mm): 6.00; Program Radius (mm): 0.75; Number of Flutes: 5; Material: Solid Carbide; Finish/Coating: Tplus; Length of Cut (mm): 6.0000; Shank Diameter (mm): 6.0000; Overall Length (mm): 75.0000; Reach Length (mm): 24.00;
• Guhring Roughing End Mill for High Tensile Materials 6.00mm Diameter 6.0mm Shank 13.00mm Length of Cut 57mm Overall
• Ball End Mill: 0.156″ Dia, 0.234″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Guhring Roughing End Mill for Tough Materials 6.00mm Diameter 6.0mm Shank 13.00mm Length of Cut 57mm Overall
• Spiral Flute Tap: MJ3 x 0.50, MJ, 3 Flute, Modified Bottoming, 4H Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Brackets; Type: Fork Bracket; Length (mm): 200.00; Width (mm): 200.00; Height (mm): 150.0000; Load Capacity (Lb.): 66.000; Finish/Coating: Ivory; Minimum Order Quantity: Aluminum; Material: Aluminum