Products

• Ball End Mill: 0.093″ Dia, 0.14″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1767; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1766; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1633; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.093″ Dia, 0.14″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1329; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1632; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1516; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1649; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1765; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1509; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Milling Insert: KDMB20M0ERSF, KCPK10, Cast Iron & Steel N/A Finish, 0.7874″ OAW
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1508; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1517; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1518; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• 50' Adjustable Bungee Strap with Adjustable Nylon Hooks End Military Green
• Chamfer Mill: 3 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Bright/Uncoated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1333; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1466; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 4 Flute, 0.0157″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1770; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.093″ Dia, 0.14″ LOC, 6 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlTiN Nano Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1599; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Chamfer Mill: 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Bright/Uncoated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1332; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 3 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 42 ° Helix, TiB2 Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1334; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Guhring Roughing End Mill for High Tensile Materials 10.00mm Diameter 10.0mm Shank 22.00mm Length of Cut 72mm Overall
• Ball End Mill: 3 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 42 ° Helix, TiB2 Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1467; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Right Hand Cut, Carbide 2.8346″ OAL, 0.0039″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1780; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Right Hand Cut, Carbide 2.8346″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1335; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Left Hand Cut, Carbide 2.8346″ OAL, 0.0039″ Corner Radius
• Chucking Reamer: 0.275″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1468; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Left Hand Cut, Carbide 2.8346″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1790; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1469; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1336; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1771; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Chucking Reamer: 0.26″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.258″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Square End Mill: 1/2'' Dia, 1-1/2'' LOC, 1/2'' Shank Dia, 3-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN+ Finish, Spiral Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series 6/44
• Square End Mill: 1/2'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 3'' OAL, 6 Flutes, Solid Carbide Single End, TXC Finish, Spiral Flute, 45 ° Helix, RH Cut, RH Flute, Series HM6F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1337; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1773; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Label Maker & Tape Accessories; Type: Printer Ribbon; For Use With: BradyPrinter A5500 Flag Printer Applicator; Background Color: Black; Width (Decimal Inch): 1.5750; Type: Printer Ribbon; Description: Label Roll of 984 ft; Color: Black; Length (Feet): 98
• Hook & Loop; Shape: Rectangle; Tape Width: 1.00 in; Color: Black; Piece Length (Inch): 2; Component Type: Dual Lock; Number Of Pieces: 100.000
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1730; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Hook & Loop; Shape: Rectangle; Tape Width: 1.00 in; Color: Clear; Piece Length (Inch): 2; Component Type: Dual Lock; Number Of Pieces: 100.000
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1772; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1338; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1774; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Open End Wrench: Single End Head, 55 mm 15 ° Head Angle, Vanadium Steel, Manganese Phosphate Finish
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1740; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1641; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1775; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1642; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1339; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Masking Tape: 60 yd Long, 6.7 mil Thick, White Paper, Rubber Adhesive, 20 lb/in Tensile Strength
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1750; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1776; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1464; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1331; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1507; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1715; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1716; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1717; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: TNMG 33 09 24-HM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0938″ Corner Radius, N/A Series TNMG-HM
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1718; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: TNMG 33 09 24-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0938″ Corner Radius, N/A Series TNMG-MR (ISO P)
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1719; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: TNMG 33 09 24-PR 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0938″ Corner Radius, N/A Triangle, Series TNMG-PR
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1491; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: TNMG 33 09 24-PR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0938″ Corner Radius, N/A Triangle, Series TNMG-PR
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1668; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1492; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Edge Pulls; Width (Inch): 11-13/16; Depth (Inch): 1-1/2; Thickness (mm): 2.5; Hole Diameter: 3.5000; Distance Between Centers Width: 90.0000; Material Grade: 304; Finish/Coating: Mirror; Material: Stainless Steel; Material: Stainless Steel
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1535; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Edge Pulls; Width (Inch): 11-13/16; Depth (Inch): 1-1/2; Thickness (mm): 2.5; Hole Diameter: 3.5000; Distance Between Centers Width: 90.0000; Material Grade: 304; Finish/Coating: Satin; Material: Stainless Steel; Material: Stainless Steel
• Brackets; Type: Lever Release; Length (mm): 1576.00; Width (mm): 52.00; Height (mm): 102.0000; Finish/Coating: Plain; Minimum Order Quantity: PBT; Stainless Steel; Material: PBT; Stainless Steel
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1402; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1536; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1403; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1669; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1404; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1537; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1405; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1406; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1538; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1539; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1407; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1711; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1408; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1712; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1409; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1357; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1530; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1792; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1358; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1540; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1793; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1359; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1795; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1794; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1550; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.3934″ Dia, 0.335″ LOC, 4 Flute, Solid Carbide 2-3/4″ OAL, 7/16″ Shank Dia, AlTiN Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1661; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1796; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1663; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1560; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Gray Double-Sided Foam Tape: 2″ Wide, 25 mil Thick, Acrylic Adhesive
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1662; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• 1-1/2″ Head Diam, 3/4″ Shank Diam, 1 Flute 100° High Speed Steel Countersink Oxide Finish, 3-1/2″ OAL, Single End, Straight Shank, Right Hand Cut
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1664; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1797; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1531; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1798; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1665; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1532; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1666; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1510; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Masking Tape: 60 yd Long, 7.6 mil Thick, Tan Crepe Paper, Rubber Adhesive, 28 lb/in Tensile Strength
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1533; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1799; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: CCGT32.52FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1401; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: CCGW32.52FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW32.51FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1520; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: CCGW32.5.5FNA5 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1534; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1667; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4720; Length of Cut (mm): 14.5000; Connection Type: E12; Overall Length (mm): 28.3000; Flute Type: Spiral; Material Grade: WJ30RD; Helix Angle: 50; C
• Spiral Flute Tap: M8 x 1.25, Metric, 3 Flute, 2-3 P, 6HX Class of Fit, TiN Finish Right Hand Flute, Right Hand Thread, D5, Series Enorm
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1591; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 1/2; Mill Diameter (Decimal Inch): 0.5000; Length of Cut (Inch): 0.5710; Connection Type: E12; Overall Length (Inch): 1.1140; Flute Type: Spiral; Material Grade: WJ30RD; Helix Angle: 50;
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1592; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4720; Length of Cut (mm): 14.5000; Connection Type: E12; Overall Length (mm): 28.3000; Flute Type: Spiral; Material Grade: WJ30RA; Helix Angle: 50; C
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1593; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 1/2; Mill Diameter (Decimal Inch): 0.5000; Length of Cut (Inch): 0.5710; Connection Type: E12; Overall Length (Inch): 1.1140; Flute Type: Spiral; Material Grade: WJ30RA; Helix Angle: 50;
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1461; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1594; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Boring Bar: 7 mm Min Bore, 35 mm Max Depth, Right Hand Cut, Carbide 7 mm Shank Dia, 73.80 mm OAL, 0.05 mm Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1462; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Boring Bar: 7 mm Min Bore, 35 mm Max Depth, Right Hand Cut, Carbide 7 mm Shank Dia, 73.80 mm OAL, 0.15 mm Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1595; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Boring Bar: 7 mm Min Bore, 35 mm Max Depth, Right Hand Cut, Carbide 7 mm Shank Dia, 73.80 mm OAL, 0.08 mm Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1597; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Boring Bar: 7 mm Min Bore, 35 mm Max Depth, Right Hand Cut, Carbide 7 mm Shank Dia, 73.80 mm OAL, 0.15 mm Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1463; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1596; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Straight Flutes Tap: 3/8-24, UNF, 5 Flutes, Modified Bottoming, 2BX, Powdered Metal High Speed Steel, TiAlN Finish 0.811″ Thread Length, 3.543″ OAL, Right Hand, Series MTS
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1465; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 0.94
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1598; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.3937″ Dia, 0.8661″ LOC, 2 Flute, Solid Carbide Uncoated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1368; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.1575″ Dia, 0.4331″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1590; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.1181″ Dia, 0.315″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• 1/2″ Diam 3-Flute 37° Solid Carbide 0.03″ Corner Radius Roughing & Finishing End Mill Uncoated, 1-1/8″ LOC, 3″ OAL, 1/2″ Shank Diam, Series AL
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1580; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1.688″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4-1/2″ OAL, 3/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Woodruff Keyseat Cutter: 0.3125″ Cut Dia, 0.078″ Cut Width, 5/16″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1498; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1.688″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 4-1/2″ OAL, 3/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1497; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.0787″ Dia, 0.2756″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1363; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.3937″ Dia, 0.8661″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1496; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.315″ Dia, 0.748″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1570; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.1969″ Dia, 0.5118″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1364; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.2362″ Dia, 0.5118″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Ball End Mill: 0.315″ Dia, 0.748″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1366; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Chamfer End Mill: 0.7874″ Dia, 1.6142″ LOC, 3 Flute, 0.0079″ Chamfer Width, Solid Carbide 4.13 mm OAL, ZrN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1499; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1367; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 10; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 6; End Mill Material: Solid Carbide; Overall Length: 0.79
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1365; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 10; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 6; End Mill Material: Solid Carbide; Overall Length: 0.79
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1713; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• 6, 7 Pin Best I/C Core Mortise Cylinder Steel & Brass, Satin Chrome Finish
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1714; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1495; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Boring Bar: 0.36″ Min Bore, 1.6″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 3″ OAL, 0.006″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1361; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1788; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.187″ Dia, 0.15″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 45 ° Helix, TiB2 Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1494; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1640; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1522; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1493; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1655; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1630; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1362; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1521; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1787; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1653; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1620; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1785; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1349; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1680; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1786; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• 800 Lb Load Capacity, Safety Engineered Center Pull Hoist Ring 7 Ft/Lb Torque, 5/16 - 18 Thread, 1/4″ Thread Length & Alloy Steel Material
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1782; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: 6QS-WNGA432-H BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Turning Insert: 6QS-TNGA332-H BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGA
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1347; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1346; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: 6QS-TNGA333-H BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGA
• Slitting & Slotting Saw: 5″ Dia, 1/16″ Thick, 40 Teeth, High Speed Steel Bright/Uncoated, Straight
• Turning Insert: 6QS-TNGA333 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGA
• Milling Inserts; Insert Style: XB1D; Insert Size: 100; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XB1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals):
• Turning Insert: 6QS-WNGA432 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1479; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Milling Inserts; Insert Style: XR1D; Insert Size: 10004; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1660; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Milling Inserts; Insert Style: XR1D; Insert Size: 10008; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Turning Insert: 6QS-TNGA332 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGA
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1781; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Milling Inserts; Insert Style: XR1D; Insert Size: 10001; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1478; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Electromagnet Lock Accessories; Type: MicroProx Access Tag; For Use With: Trilogy Proximity Locks; Material: Plastic; Material: Plastic; For Use With: Trilogy Proximity Locks; Type: MicroProx Access Tag; Accessory Type: MicroProx Access Tag; Type: MicroPr
• Milling Inserts; Insert Style: XR1D; Insert Size: 10002; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/4; Thickness Range (Decimal Inch): 0.2350 to 0.2500; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1670; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Woodruff Keyseat Cutter: 0.5″ Cut Dia, 0.04″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Duct Tape: 2″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1345; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1348; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1650; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1784; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1529; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Square End Mill: 3/8'' Dia, 15/32'' LOC, 3/8'' Shank Dia, 5'' OAL, 5 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series VGM5-LN
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1783; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/8″ Dia, 1-5/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 40 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1610; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Spiral Flute Tap: M12 x 1.75, Metric, 3 Flute, Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D8 & D9, Series 4630
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1652; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1651; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1654; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1528; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability