Products

• Lever Locksets; Door Thickness: 1 3/4 - 2 1/8; Back Set: 2-3/4; For Use With: Classroom or Utility Room Doors; Finish/Coating: Satin Chrome; Cylinder Type: 6 Pin Schlage C Keway, Keyed; Special Item Information: Classroom Lock Function; Rating: Fire Rated
• Square End Mill: 1/2'' Dia, 3-1/8'' LOC, 1/2'' Shank Dia, 6'' OAL, 2 Flutes, Solid Carbide Single End, ANF Finish, Helical Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series A245
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4639; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Chucking Reamer: 0.436″ Dia, 3-3/4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 5/8-11; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 5/8-18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: High
• Chucking Reamer: 0.432″ Dia, 3-3/4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 5/8-18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: High Spe
• Chucking Reamer: 0.429″ Dia, 3-3/4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 5/8-11; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: High Spe
• Chucking Reamer: 0.427″ Dia, 3-3/4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.433″ Dia, 3-3/4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4641; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Chucking Reamer: 0.4373″ Dia, 3-3/4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.434″ Dia, 3-3/4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4642; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Chucking Reamer: 0.43″ Dia, 3-3/4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4645; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Chucking Reamer: 0.414″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.424″ Dia, 3-3/4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4643; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.4252″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4644; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.4062″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4647; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4648; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4653; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4651; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: M14 x 1.50, Metric Fine, 3 Flute, Semi-Bottoming, 6HX Class of Fit, PM-HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4637
• Spiral Flute Tap: 5/8-11, UNC, 4 Flute, Modified Bottoming, VC-10, V Finish 0.728″ Thread Length, 4.33″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 317
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4654; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: 5/8-18, UNF, 4 Flute, Modified Bottoming, VC-10, V Finish 0.728″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 317
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4655; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: 5/8-18, UNF, 4 Flute, Modified Bottoming, VC-10, V Finish 0.728″ Thread Length, 3.93″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 317
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5091; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: 5/8-11, UNC, 4 Flute, Modified Bottoming, VC-10, V Finish 0.728″ Thread Length, 4.33″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 317
• Screw Machine Length Drill Bit: 0.1719″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5095; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.159″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5096; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5093; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.1875″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.1969″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5094; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.1811″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5099; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.1929″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5097; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.1614″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.189″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5098; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5034; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.1693″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5031; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.1654″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5038; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.1772″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.1732″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.185″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5032; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.1772″ Dia, 135 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 142P
• Corner Radius End Mill: 3/4″ Dia, 1″ LOC, 1/8″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 1/2″ Shank Dia, 38 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 1/2″ Shank Dia, 38 ° Helix, nACRo Coated, Corner Radius End
• Screw Machine Length Drill Bit: 0.6102″ Dia, 140 °, Solid Carbide EgiAs Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 6300
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5042; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9247; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: CNGN432TM-S WBK30, Neutral, 1/2″ Inscribed Circle, 80.0 &deg N/A Rhombic,
• RCGW0803MTED 7014 Carbide Turning Insert Uncoated, Neutral, 8mm Inscribed Circle, 4mm Corner Radius, 1/8″ Thick, Round, Series CoroTurn 107
• RCGW10T3MTED 7014 Carbide Turning Insert Uncoated, Neutral, 10mm Inscribed Circle, 5mm Corner Radius, 5/32″ Thick, Round, Series CoroTurn 107
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5048; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Chamfer End Mill Head: 0.4724″ Dia, 45 °, 4 Flute S05, TiAlN Finish, Helical Flute, Series VED
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5046; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5047; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• 1-1/2″ Head Diam, 3/4″ Shank Diam, 1 Flute 60° Cobalt Countersink Bright Finish, 3-1/4″ OAL, Single End
• Lever Locksets; Door Thickness: 1-3/4; Door Thickness: 1-3/4; Back Set: 2-3/4; For Use With: Entrance; General Home or Office Doors; Finish/Coating: Oxidized Satin Dark Bronze (10B); Cylinder Type: 6 Pin Schlage C Keway, Keyed; Special Item Information: E
• Electric Strikes; Power Type: Electric; Strike Material: Steel; Finish/Coating: Satin Chrome; Voltage: 24; Material: Steel; Type of Power: Electric; Finish: Satin Chrome
• Electric Strikes; Power Type: Electric; Strike Material: Steel; Finish/Coating: Satin Chrome; Voltage: 8; Material: Steel; Type of Power: Electric; Finish: Satin Chrome
• Polytetrafluroethylene Film Tape: 1/2″ Wide, 36 yd Long, 3.7 mil Thick 22 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Screw Machine Length Drill Bit: 0.4094″ Dia, 135 °, Solid Carbide Coated, Straight-Cylindrical Shank, Series MDW-GS
• Spiral Point Tap: M18 x 1.5, Metric, 3 Flutes, Plug, HSSE Finish 30 mm Thread Length, 110 mm OAL, Right Hand, D6, Series 346
• Spiral Point Tap: M18 x 2.5, Metric, 3 Flutes, Plug, HSSE Finish 30 mm Thread Length, 125 mm OAL, Right Hand, D7, Series 346
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9060; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Guhring Steel and Cast Iron Roughing End Mill 10.00mm Diameter 10.0mm Shank 30.00mm Length of Cut 80mm Overall
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9595; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball End Mill: 0.6875″ Dia, 1.375″ LOC, 3 Flute, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.6875″ Dia, 1.375″ LOC, 4 Flute, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Threaded Ring Gage: 1-1/8-18 Thread, UNEF, Class 2B & 3B, Go
• Threaded Ring Gage: 1-1/8-18 Thread, UNEF, Class 2B, No Go
• Threaded Ring Gage: 1-1/8-18 Thread, UNEF, Class 3B, No Go
• Ball End Mill: 0.4375″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, 7/16″ Shank Dia, 35 & 38 ° Helix, AlCr Coated, Single End, Series 2919L
• 36 Piece, 1/8″ Character Steel Stamp Set Letters & Figures, Standard
• Double Angle Milling Cutter: 90 °, 5/8″ Cut Dia, 0.313″ Cut Width, 5/16″ Shank Dia, Brazed Solid Carbide 3.313″ OAL, Uncoated, 8 Teeth
• Glass Cloth Tape; Width (Inch): 2; Material Type: Aluminum; Glass Cloth; Color: Silver; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 6.8000; Tensile Strength (Lb./Inch): 100.00; Maximum Operating Temperature (F): 500.000
• Straight Flutes Tap: Metric, 5 Flutes, Modified Bottoming, 6HX, Powdered Metal High Speed Steel, TiAlN Finish Right Hand, Series MTS
• Spiral Flute Tap: M14 x 2.00, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, ZrN Finish Right Hand Flute, Right Hand Thread, Series CoroTap 300
• FRL Combination Unit: 1/4 NPT, Compact, 1 Pc Filter/Regulator 148 SCFM, 250 Max psi, Aluminum Bowl, Manual Drain
• Ball End Mill: 0.625″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Ball End Mill: 0.625″ Dia, 3″ LOC, 2 Flute, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Ball End Mill: 0.625″ Dia, 3″ LOC, 3 Flute, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Screw Machine Length Drill Bit: 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series R457
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 4 Flutes, Solid Carbide 45 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 4 Flutes, Solid Carbide 45 ° Helix, AlTiN Coated, Corner Radius End
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Right Hand Cut, Carbide 2.8346″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Left Hand Cut, Carbide 2.8346″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Right Hand Cut, Carbide 2.8346″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Left Hand Cut, Carbide 2.8346″ OAL, 0.0039″ Corner Radius
• Chucking Reamer: 1-1/8″ Dia, 11″ OAL, 2-7/8″ Flute Length, Straight Shank, High Speed Steel 8 Flute
• Hydraulic Dampers & Gas Springs; Type: Mechanical Compression Spring Strut; Material: Steel; Extended Length: 24.82; Load Capacity: 338; Stroke: 6.0000; Rod Diameter (Decimal Inch): 14.0 mm; 0.550; 0.55 in; Tube Diameter: 1.1 in; End Fitting Connection: T
• Square End Mill: 3/8'' Dia, 2'' LOC, 3/8'' Shank Dia, 4'' OAL, 5 Flutes, Solid Carbide Single End, AlCrN Finish, Spiral Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series Eliminator
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9462; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Grooving Insert: SGN BX360, Cubic Boron Nitride Uncoated, Neutral, 0.157″ Cutting Width, Series SGN
• Turning Insert: RCMX 32 09 00 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.6299″ Corner Radius, N/A Series RCMX
• Turning Insert: RCMX 32 09 00 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.6299″ Corner Radius, N/A Series RCMX
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, 2-3 P, Normal Class of Fit, Solid Carbide, Bright/Uncoated 0.598″ Thread Length, 3.14″ OAL, Right Hand Flute, Right Hand Thread, H5
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, 2-3 P, Normal Class of Fit, Solid Carbide, Bright/Uncoated 0.598″ Thread Length, 3.14″ OAL, Right Hand Flute, Right Hand Thread, H4
• Spiral Flute Tap: M14 x 2.00, Metric, 3 Flute, Semi-Bottoming, 6GX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D11 & D12, Series 4625
• Polyimide Film Tape: 12″ Wide, 1' x 3.3 mil Thick Acrylic Adhesive, -40 to 450 ° F
• Door Closer Accessories; Type: High Security Door Position Switch; For Use With: Wood Doors & Metal Frames; Color: Black; Type: High Security Door Position Switch; Accessory Type: High Security Door Position Switch; For Use With: Wood Doors & Metal Frames
• Square End Mill: 1/2'' Dia, 2'' LOC, 1/2'' Shank Dia, 4'' OAL, 6 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 38 ° Helix, Centercutting, RH Cut, RH Flute
• Chamfer Mill: 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, AlTiN Coated
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Left Hand Cut, Carbide 2.8346″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Left Hand Cut, Carbide 2.8346″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Right Hand Cut, Carbide 2.8346″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Right Hand Cut, Carbide 2.8346″ OAL, 0.0079″ Corner Radius
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Spiral Flute Tap: 3/4-10, UNC, 4 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 0391
• Square End Mill: 1/2'' Dia, 3/4'' LOC, 3'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Nano Finish, Helical Flute, RH Cut, RH Flute
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 1/8″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.09″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Turning Insert: VCGT221FNA4CB1 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Turning Insert: VCGT221FNA4CB2 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Turning Insert: CCGT2151FNA2QCB2, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Duct Tape: 6″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Adjustable Concealed Door Hinge: Zinc Alloy & Stainless Steel, Nickel Finish
• Adjustable Concealed Door Hinge: Zinc Alloy & Stainless Steel, Black Finish
• Adjustable Concealed Door Hinge: Zinc Alloy & Stainless Steel, Dull Chrome Finish
• Socket-Head Cap Screw Compatible, High Speed Steel Solid Pilot Counterbore Bright (Polished), Straight Shank
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.04″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3.04″ OAL, 10 Teeth, Brazed Solid Carbide, AlTiN Finish
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 50 ° Helix, nACRo Coated, Corner Radius End, Centercutting, Series SM4F
• Gravity Conveyors; Roller Style: Roller; Shape: Round; Roller Diameter (Decimal Inch): 0.75 in; 0.75 mm; Length (Feet): 52; Wheel Material: Aluminum; Load Capacity (Lb.): 50.000; Frame Material: Galvanized Steel; Gauge: 14 ga; 14 gauge; Centerline Distanc
• Filters; Filter Type: General Purpose Filter; Port Size: 3/4 NPT; End Connections: NPT; Bowl Material: Aluminum; Bowl Guard Material: Nylon; Drain Type: Manual; Standard Cubic Feet Per Minute: 145; Filter Media Material: Sintered Polyethylene; Series: 28;
• Ball End Mill: 0.375″ Dia, 4 Flute, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Polyester Film Tape: 1″ Wide, 60 yd Long, 6.5 mil Thick 275 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Ball End Mill: 0.1875″ Dia, 0.5″ LOC, 4 Flute, Solid Carbide 3-1/4″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Double End
• Ball End Mill: 0.1563″ Dia, 0.4375″ LOC, 4 Flute, Solid Carbide 3-1/4″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Double End
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 25; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 1.97
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.2226; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Roughing End Mill
• Turning Insert: SNMM866EN-R58 CTCP125, Solid Carbide TiCN & Al2O3 Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Turning Insert: CNMM866EN-R58 CTCP135, Solid Carbide TiCN & Al2O3 Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMM866SN-R88 CTCP125, Polycrystalline Cubic Boron Nitride TiCN & Al2O3 Finish, Neutral, 0.0472″ Corner Radius, 60.0 &deg N/A Triangle, Series CNMM
• Turning Insert: CNMM866EN-R58 CTCP115, Solid Carbide TiCN & Al2O3 Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: SNMM866EN-R58 CTCP115, Solid Carbide TiCN & Al2O3 Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Turning Insert: CNMM866SN-R88 CTCP115, Solid Carbide TiCN & Al2O3 Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMM866SN-R88 CTCP135, Solid Carbide TiCN & Al2O3 Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMM866EN-R58 CTCP125, Solid Carbide TiCN & Al2O3 Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMM866ENR28 CTCP115P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: SNMM866SNR88 CTCP125P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Turning Insert: SNMM866SNR88 CTCP135P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Turning Insert: SNMM866ENR58 CTCP125P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Turning Insert: SNMM866ENR58 CTCP135P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Turning Insert: CNMM866ENR58 CTCP135P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMM866SNR88 CTCP125P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMM866ENR58 CTCP125P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMM866SNR88 CTCP115P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: SNMM866ENR28 CTCP125P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Turning Insert: SNMM866ENR28 CTCP115P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Turning Insert: CNMM866EN-R28 CTCP135, Solid Carbide TiCN & Al2O3 Finish, Neutral, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Jobber Length Drill Bit: 0.6875″ Dia, 85 °, Micron Grain Carbide Diamond Finish, 5.63″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series UDR5P1AA
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.005″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 0.4724'' Dia, 1.1811'' LOC, 2 Flutes, Solid Carbide Single End, ZrN Finish, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.5″ Dia, 5 Flute, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Corner Rounding End Mill: 3 Flutes 57″ OAL, 6″ Shank Dia
• Corner Rounding End Mill: 3 Flutes 57″ OAL, 6″ Shank Dia
• Corner Rounding End Mill: 3 Flutes 57″ OAL, 6″ Shank Dia
• Ball End Mill: 0.1875″ Dia, 0.1875″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4630
• Gray Double-Sided Foam Tape: 3/4″ Wide, 25 mil Thick, Acrylic Adhesive
• Polyimide Film Tape: 2″ Wide, 5 yd Long, 2.7 mil Thick 33 Lb/In Tensile Strength, Silicone Adhesive, -99.4 to 500 ° F
• Ball End Mill: 0.5″ Dia, 1″ LOC, 4 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCrO-MAX Coated, Single End
• Adjustable Concealed Cabinet Hinge: Zinc Alloy & Stainless Steel, Dull Chrome Finish
• Adjustable Concealed Cabinet Hinge: Zinc Alloy & Stainless Steel, Nickel Finish
• Adjustable Concealed Cabinet Hinge: Zinc Alloy & Stainless Steel, Black Finish
• Spiral Point Tap: #8-32, UNC, 3 Flutes, Gunnose, 3B, High Speed Steel, TiCN Finish 0.512″ Thread Length, 2-31/64″ OAL, Right Hand, Series 22207
• Screw Machine Length Drill Bit: 0.2559″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1116; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Die-Cut Label for Printer: 3″, Paper, White Use with BradyJet J2000 Color Label Printer
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Chamfer Mill: 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Bright/Uncoated
• Drill Mill: 1/4″ Dia, 3/4″ LOC, 4 Flutes, 82 ° Point, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Nano Finish
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.047″ Dia, 0.038″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Milling Insert: XOHX 254010-FM2 CTPP216, CTPP216, Solid Carbide N/A Finish, 1.0000″ OAW
• Plug Thread Gage: M5x0.80 Thread, 6H Class, No Go
• Plug Thread Gage: M4x0.70 Thread, 6H Class, No Go
• Plug Thread Gage: M5x0.80 Thread, 6H Class, Go
• Guhring Steel and Cast Iron Roughing End Mill 6.00mm Diameter 6.0mm Shank 13.00mm Length of Cut 75mm Overall
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.2008; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Plug Thread Gage: M4x0.70 Thread, 6H Class, Go
• Corner Radius End Mill Head: 4 Flutes E12, Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Chamfer Mill: 8 mm Dia, 6 Flutes, Solid Carbide 100 mm OAL, 6 mm Shank Dia, TiAlN Coated
• 2-43/64 Inch Long, Swing Friction Hook 17.00 Load Capacity
• Jobber Length Drill Bit: 0.4252″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Turning Insert: S-TNGN223 BXC90, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0470″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGN
• Turning Insert: S-TNGN222 BXC90, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGN
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 5/8″ Dia, 1-5/8″ LOC, 0.04″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 1/8″ Dia, 0.1″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Threaded Ring Gage: 1-1/16-18 Thread, UNEF, Class 2B, No Go
• Threaded Ring Gage: 1-1/16-18 Thread, UNEF, Class 2B & 3B, Go
• Threaded Ring Gage: 1-1/16-18 Thread, UNEF, Class 3B, No Go
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Left Hand Flute, Left Hand Thread, D7 & D8, Series 4629
• Die-Cut Label for Printer: 1/2″, Polypropylene, Clear Use with BradyPrinter i5100 Industrial Label Printer, BradyPrinter i7100 Industrial Label Printer & THT 3″ Core Printers
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Turning Insert: VCGT333FN_A5 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0472″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Chamfer Mill: 6 mm Dia, 5 Flutes, Solid Carbide 57 mm OAL, 6 mm Shank Dia, TiAlN Coated
• Screw Machine Length Drill Bit: 0.375″ Dia, 135 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Polyimide Film Tape: 4″ Wide, 5 yd Long, 2.7 mil Thick 33 Lb/In Tensile Strength, Silicone Adhesive, -99.4 to 500 ° F
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Inch; Head Type: Offset; Box End Type: 12-Point; Wrench Size (Decimal Inch): 0.4380; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Le