Products

• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4865; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #8-36; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High Spee
• Screw Machine Length Drill Bit: 0.3661″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Hydraulic Dampers & Gas Springs; Type: Mechanical Compression Spring Strut; Material: Steel; Extended Length: 30.82; Load Capacity: 278; Stroke: 10.0000; Rod Diameter (Decimal Inch): 14.0 mm; 0.550; 0.55 in; Tube Diameter: 1.1 in; End Fitting Connection:
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2334; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3347; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3321; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.3583″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Spiral Flute Tap: 9/16-18, UNF, 3 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H5 & H6, Series 4657
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2331; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Straight, 1/2-14
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3201; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.3504″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Spiral Flute Tap: 9/16-12, UNC, 3 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 4656
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3258; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2332; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4864; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Pipe Thread Plug Gage: Straight, 1/4-18 Handle Size 2
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3334; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.3465″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2335; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3365; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4869; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3245; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #6-32; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2326; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3378; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2325; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Screw Machine Length Drill Bit: 0.3425″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Screw Machine Length Drill Bit: 0.3386″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3286; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #8-36; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High Spee
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4868; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2328; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3255; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.3307″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2361; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4872; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3430; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #10-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High
• Screw Machine Length Drill Bit: 0.3268″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3375; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2363; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4877; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3242; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.3228″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.09″ Radius, 3 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2362; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #8-36; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High S
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4874; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3268; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.3543″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3211; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2369; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #12-28; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High Spe
• Screw Machine Length Drill Bit: 0.3346″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.09″ Radius, 2 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2366; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3380; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2367; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3388; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4876; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: M16, Metric, 4 Flute, Modified Bottoming, 6HX Class of Fit, HSS-E-PM, ACN Finish Right Hand Flute, Right Hand Thread, Series MTH
• Screw Machine Length Drill Bit: 0.3189″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Pipe Thread Plug Gage: Straight, 1/2-14 Handle Size 3
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3250; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2368; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Screw Machine Length Drill Bit: 0.3858″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3331; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2364; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #8-36; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High S
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3357; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4875; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.3701″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Whistle Notch Shank, Series DC160-03-F1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2365; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3224; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Pipe Thread Plug Gage: Straight, 1/2-14
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2349; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3344; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4837; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2351; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3263; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #10-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High
• Spiral Flute Tap: M20 x 1.50, Metric Fine, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4834; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3289; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.348″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2380; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3406; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2390; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4838; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #6-40; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3352; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2359; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3232; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #6-40; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2383; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3330; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4839; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2382; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3359; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2385; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #8-32; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High Spee
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3422; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Woodruff Keyseat Cutter: 0.875″ Cut Dia, 0.25″ Cut Width, 3/8″ Shank Dia, Straight Tooth 3-1/4″ OAL, 12 Teeth, Brazed Solid Carbide, AlTiN Finish
• Ball End Mill: 0.5″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 37 ° Helix, AlCrN Coated, Single End, Series XPVB
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2384; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3257; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #12-28; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3213; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2387; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5080; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Pipe Thread Plug Gage: Straight, 1/2-14 Handle Size 3
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3333; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2386; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3226; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2340; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #10-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3346; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3292; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2353; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Straight, 1/8-27 Handle Size 2
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4844; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3315; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2350; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3302; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #8-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High S
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3270; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2352; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3239; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2355; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4842; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3435; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Ball End Mill: 0.5″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, AlCrN Coated, Single End, Series XPVB
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2360; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #12-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3294; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4847; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2356; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Straight, 3/4-14 Handle Size 4
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3317; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Woodruff Keyseat Cutter: 0.5″ Cut Dia, 0.125″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3″ OAL, 12 Teeth, Solid Carbide, AlTiN Finish, ANSI 404, Old Standard 3
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2354; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3304; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Pipe Thread Plug Gage: Straight, 3/4-14 Handle Size 4
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2370; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3437; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4845; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3383; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2358; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #12-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2310; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3396; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #5-44; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: High Spe
• Die-Cut Label for Printer: 3″, Polypropylene, Clear Use with BradyPrinter i5100 Industrial Label Printer, BradyPrinter i7100 Industrial Label Printer & THT 3″ Core Printers
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3276; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2357; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #5-40; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2320; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3419; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4851; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3377; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #6-40; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3244; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2330; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #8-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High Spee
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3351; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2381; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3288; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4855; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #5-44; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2389; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3231; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4852; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3395; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2388; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #12-28; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3275; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2372; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Straight, 1/4-18 Handle Size 2
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3320; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2375; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Die-Cut Label for Printer: 1″, Self-Laminating Vinyl, Clear & White Use with BBP33 Sign & Label Printer & BradyPrinter i3300 Industrial Label Printer
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #10-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3418; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4419; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2373; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3364; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2374; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #10-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4416; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3262; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Adjustable Stop Replacement Cone
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2323; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Square End Mill: 1/2'' Dia, 1-1/8'' LOC, 1/2'' Shank Dia, 3-1/4'' OAL, 3 Flutes, Solid Carbide Single End, DLC-IGUSS Finish, 0 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #12-28; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3209; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2322; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3316; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2321; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3293; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #6-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2324; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3405; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4422; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2314; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3199; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #10-32; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3329; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2313; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3382; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2316; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #6-40; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: High
• Ball End Mill: 0.75″ Dia, 1″ LOC, 3 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 37 ° Helix, ZrN Coated, Single End, Series 2047
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2315; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #12-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2318; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2317; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #5-40; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High Spe
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #12-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2319; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2377; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2378; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Straight, 3/8-18 Handle Size 3
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2376; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Straight, 1/4-18
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2379; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5020; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #6-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: High Spe
• Screw Machine Length Drill Bit: 0.5118″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5200
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2371; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5030; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• AW-68 Machine Oil: ISO 68, 55 gal
• Jobber Length Drill Bit: 0.6594″ Dia, 118 °, High Speed Steel TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 651
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2302; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Spiral Point Tap: 5/8-11, UNC, 4 Flutes, Plug, 2BX, PM Cobalt, GLT-1 Finish 4.3307″ OAL, Right Hand, H6
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2309; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 3″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1/2″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2391; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4432; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: 3/4-10, DIN, 4 Flute, Modified Bottoming, 2B Class of Fit, Black Oxide Finish 2.205″ Thread Length, 4.9213″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2301; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4433; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2304; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Duct Tape: 11-1/2″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Spiral Flute Tap: 3/4-10, DIN & ANSI, 4 Flute, Modified Bottoming, 2B Class of Fit, Black Oxide Finish 2.205″ Thread Length, 4.9213″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• Corner Radius End Mill Head: 5/8″ Dia, 2-1/4″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP