Products

• Series EP-46 Gear Oil: 55 gal Drum, ISO 46
• Corner Radius End Mill: 3/4″ Dia, 7/8″ LOC, 0.033″ Radius, 3 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Square End Mill: 1'' Dia, 2-1/2'' LOC, 1'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 1025 & Alumigator
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4583; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4593; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4592; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4598; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4599; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4594; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4595; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4561; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4564; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4562; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4568; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4571; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4572; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4575; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4574; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4579; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5001; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5004; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5002; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5009; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5006; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.5007; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4978; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: #1-8, UNC, 4 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 6.299″ OAL, Right Hand Flute, Right Hand Thread, H7, Series CU50C300
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4983; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 3/4″ Dia, 1″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Corner Radius End Mill: 3/4″ Dia, 1″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPV
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4987; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4507; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Polytetrafluroethylene Film Tape: 6″ Wide, 5 yd Long, 4 mil Thick 19 Lb/In Tensile Strength, Rubber Adhesive, 500 ° F
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4988; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Rust Inhibitor: RO-150, 55 gal Drum
• Rust Inhibitor: RO-220, 55 gal Drum
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4504; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Square End Mill Heads; Mill Diameter (Inch): 5/8; Mill Diameter (Decimal Inch): 0.6250; Number of Flutes: 6; Length of Cut (Decimal Inch): 0.9375; Length of Cut (Inch): 15/16; Connection Type: E16; Overall Length (mm): 51.1000; Overall Length (Decimal Inc
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4508; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4509; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Hook & Loop; Shape: Rectangle; Tape Width: 1.00 in; Color: Black; Piece Length (Inch): 3; Component Type: Hook & Loop; Number Of Pieces: 100.000
• Cord Stock; Shape: Round; System of Measurement: Metric; Tensile Strength (psi): 725; Coil Length (Feet): 50; Durometer: 70; Maximum Temperature (F): 350.000; Durometer (Shore A): 70A; Standard; Hardness: Standard
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4994; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Snap Gages; Minimum Measurement (mm): 6.40; Maximum Measurement (Inch): 1/2; Maximum Measurement (mm): 12.70; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 1/2; Minimum Measurement (Inch): 1/4; Minimum Measurement (Decimal Inch): 1/4
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4992; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Snap Gages; Minimum Measurement (mm): 12.70; Maximum Measurement (Inch): 3/4; Maximum Measurement (mm): 19.1; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 3/4; Minimum Measurement (Inch): 1/2; Minimum Measurement (Decimal Inch): 1/2
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4997; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4513; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4514; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Square End Mill: 28mm LOC, 14mm Shank Dia, 83mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4995; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Drawer Slides; Type: Drawer Slide; Extension Style: 3/4; Slide Length: 355.80; Travel Length: 259.90; Load Capacity (Lb.): 240.000; Width (Inch): 0.48; Finish/Coating: Zinc Plated; Additional Information: Mounting Type: Side; Closure Type: Conventional; S
• Brackets; Type: Shelf Bracket; Length (mm): 400.00; Width (mm): 30.00; Height (mm): 480.0000; Load Capacity (Lb.): 181.000; Finish/Coating: Black; Minimum Order Quantity: Steel; Material: Steel
• Corner Radius End Mill: 1/2″ Dia, 2″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM7F
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4996; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4512; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4957; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4958; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Ball End Mill: 0.5″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 35 & 38 ° Helix, AlCr Coated, Single End, Series 2919L
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4959; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Jobber Length Drill Bit: 0.4528″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4965; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Guhring Roughing End Mill for High Tensile Materials 12.00mm Diameter 12.0mm Shank 26.00mm Length of Cut 83mm Overall
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Corner Radius End Mill Head: 1/8″ Radius, 6 Flutes Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4964; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4963; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4968; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Slitting & Slotting Saw: 4″ Dia, 1/32″ Thick, 1″ Arbor Hole, 36 Teeth, Solid Carbide Bright/Uncoated
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4967; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4971; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• 10,000 Lb Load Capacity, Safety Engineered Center Pull Hoist Ring 230 Ft/Lb Torque, 1-8 Thread, 5/4″ Thread Length & Alloy Steel Material
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4972; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• 7,000 Lb Load Capacity Safety Engineered Center Pull Hoist Ring 100 Ft/Lb Torque, 3/4 - 10 Thread, Alloy Steel
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4975; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Square End Mill: 5/8'' Dia, 1'' LOC, 5/8'' Shank Dia, 6'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4973; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Square End Mill: 5/8'' Dia, 1'' LOC, 5/8'' Shank Dia, 6'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Square End Mill: 5/8'' Dia, 3'' LOC, 5/8'' Shank Dia, 6'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Square End Mill: 5/8'' Dia, 3'' LOC, 5/8'' Shank Dia, 6'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Key Machines; Type: Key Machine Cutter; Duplicator Type: Key Machine Cutter; For Use With: Supports OEM High Security & Edge Cut Keys; Excluding GM VATS & Single Sided Keys
• Corner Radius End Mill: 1/2″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Ball End Mill: 0.625″ Dia, 1.25″ LOC, 4 Flute, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End, Series SAPBR-NB
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4974; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Ball End Mill: 0.625″ Dia, 1.25″ LOC, 4 Flute, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 35 ° Helix, AlCrN Coated, Single End, Series SAPBR
• Corner Radius End Mill: 1/2″ Dia, 1-1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4541; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Hook & Loop; Shape: Rectangle; Tape Width: 1.00 in; Color: Black; Piece Length (Inch): 2; Component Type: Hook & Loop; Number Of Pieces: 100.000
• Jobber Length Drill Bit: 0.2244″ Dia, 140 °, Solid Carbide TiN Finish, 3.23″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: 3/4-10, UNC, 2 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-8 Finish 4.921″ OAL, Right Hand Flute, Right Hand Thread, H5, Series CU50S810
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4549; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: 3/4-10, UNC, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 1.181″ Thread Length, 4.921″ OAL, Right Hand Flute, Right Hand Thread, H5, Series CU50C310
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4548; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: 3/4-10, UNC, 3 Flute, Modified Bottoming, H11 Class of Fit, Cobalt, GLT-1 Finish 1.181″ Thread Length, 4.921″ OAL, Right Hand Flute, Right Hand Thread, H11, Series CU50C344
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4553; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4554; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• White Double-Sided Foam Tape: 1″ Wide, 3 yd Long, 25 mil Thick, Acrylic Adhesive
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4557; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class ZZ Plug Gage Set: 0.1969 to 0.2362″ Range, 101 Pc 0.002000″ Tolerance
• Spiral Flute Tap: 3/4-10, UNC, 4 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 4656
• Class ZZ Plug Gage Set: 0.2362 to 0.2756″ Range, 101 Pc 0.002000″ Tolerance
• Class ZZ Plug Gage Set: 0.2756 to 0.315″ Range, 101 Pc 0.002000″ Tolerance
• Corner Radius End Mill Head: 6 Flutes E16, Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4555; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4556; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• White Double-Sided Polyethylene Foam Tape: 12 mm Wide, 33 m Long, 62.5 mil Thick, Rubber Adhesive
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4518; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1/2; Length (yd): 60.00; Thickness (mil): 10.0000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 500.000; Color: Clear; Liner Material: Kraft Paper; Series:
• White Double-Sided Polyethylene Foam Tape: 18 mm Wide, 33 m Long, 62.5 mil Thick, Rubber Adhesive
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4517; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• White Double-Sided Polyethylene Foam Tape: 24 mm Wide, 33 m Long, 62.5 mil Thick, Rubber Adhesive
• Square End Mill: 3/4'' Dia, 1-1/4'' LOC, 3/4'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• D-4000 Locking Plate
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4515; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.52″ OAL, 0.315″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4516; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: M16 x 1.50, Metric, 4 Flute, Modified Bottoming, VC-10, V Finish Right Hand Flute, Right Hand Thread, D6, Series 348Ti
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4519; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4521; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Glass Cloth Tape; Width (Inch): 6; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 5.0000; Tensile Strength (Lb./Inch): 120.00; Maximum Operating Temperature (F): 500.000
• O-Ring: 0.7″ ID x 0.943″ OD, 0.103″ Thick, Dash 116, Kalrez 4079 Round Cross Section
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4524; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 3/4″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4525; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 3/4″ Dia, 1″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4522; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Clear Double-Sided Acrylic Tape: 2″ Wide, 2 yd Long, 40 mil Thick, Acrylic Adhesive
• Clear Double-Sided Acrylic Tape: 2″ Wide, 40 mil Thick, Acrylic Adhesive
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4528; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4529; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Glass Cloth Tape; Width (Inch): 2; Material Type: PTFE; Color: Black; Adhesive Material: Silicone; Length (yd): 18.00; Thickness (mil): 5.0000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4527; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Woodruff Keyseat Cutter: 1″ Cut Dia, 0.125″ Cut Width, 3/8″ Shank Dia, Straight Tooth 3-1/8″ OAL, 12 Teeth, Brazed Solid Carbide, AlTiN Finish
• Guhring Steel and Cast Iron Roughing End Mill 8.00mm Diameter 8.0mm Shank 19.00mm Length of Cut 100mm Overall
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4531; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 38 ° Helix, nACRo Coated, Corner Radius End
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4532; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4535; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4536; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Woodruff Keyseat Cutter: 1.5″ Cut Dia, 0.187″ Cut Width, 3/8″ Shank Dia, Straight Tooth 3-3/16″ OAL, 16 Teeth, Brazed Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4533; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.6250; Included Angle: 90.00; Cutting Diameter (Inch): 5/8; Minor Diameter: 0.4070; Minimum Width: 0.021; Material: Solid Carbide; Finish/Coating: Uncoated; Overall Length (Inch): 2-1/2; Shank
• Series EP-32 Gear Oil: 55 gal Drum, ISO 32
• Spiral Flute Tap: M18 x 1.50, Metric Fine, 3 Flute, 1.5-2 P, 6H Class of Fit, HSS-E, Bright/Uncoated Right Hand Flute, Right Hand Thread, D6
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4534; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Jobber Length Drill Bit: 0.5512″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• White Double-Sided Foam Tape: 2″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Woodruff Keyseat Cutter: 0.625″ Cut Dia, 0.031″ Cut Width, 5/8″ Shank Dia, Straight Tooth 3-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Finish
• Series EP-68 Gear Oil: 5 gal Pail, ISO 68
• Ring Pipe Thread Gages; Thread Size: 3/32-48; Coating: Bright; Application: Go Gage; Includes: Short Form Certification; Traceability Certification Included: BS 919-2; Material: Tool Steel; Thread Type: BSW; Thread Size (Inch): 3/32-48; Standards: BS 919-
• Corner Radius End Mill: 3/16" Dia, 5/16" LOC, 0.0100" Radius, 5 Flute, Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4904; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Woodruff Keyseat Cutter: 0.5″ Cut Dia, 0.125″ Cut Width, 1/2″ Shank Dia, Staggered Tooth 3″ OAL, 8 Teeth, Solid Carbide, AlTiN Finish
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4935; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4908; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4909; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4936; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4933; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• 1/2″ Diam 6-Flute 35/38° Solid Carbide 0.008″ Corner Chamfer Roughing & Finishing End Mill AlCr Finish, 1″ LOC, 3″ OAL, 1/2″ Shank Diam, Centercutting, Standard Length
• Electromagnet Lock Accessories; Type: Door Harness Assembly; For Use With: 32 to 36 in Door Width; Material: Steel; Material: Steel; For Use With: 32 to 36 in Door Width; Type: Door Harness Assembly; Accessory Type: Door Harness Assembly; Type: Door Harne
• Turning Insert: VCGT331FNA3CB2 CTDCD10, Polycrystalline Diamond Diamond Coating Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Electromagnet Lock Accessories; Type: Companion Cable; For Use With: LCN 9550 Series (Senior Swing) Power Operators; Material: Brass; Material: Brass; For Use With: LCN 9550 Series (Senior Swing) Power Operators; Type: Companion Cable; Accessory Type: Com
• Cast Machine Stretch Film, 20″ x 80 Gauge x 5000', Clear, 1/Roll
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4937; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4941; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• XOHW1104PDR WDO PCD Milling Insert 9.52mm Long x 4.76mm Thick x 9.52mm Wide
• Corner Radius End Mill: 0.3937″ Dia, 0.02″ Radius, 5 Flutes, Solid Carbide 35 ° Helix, Corner Radius End, Series MD133
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4947; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 0.3937″ Dia, 0.02″ Radius, 5 Flutes, Solid Carbide 35 ° Helix, Corner Radius End, Series MD133
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 3/4; Mill Diameter (Decimal Inch): 0.7500; Length of Cut (Inch): 0.8390; Connection Type: E20; Overall Length (Inch): 1.6060; Flute Type: Spiral; Material Grade: WJ30TF; Helix Angle: 50;
• Screw Machine Length Drill Bit: 0.4688″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Corner Radius End Mill: 5/8″ Dia, 3/4″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 5/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPV
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 3/4; Mill Diameter (Decimal Inch): 0.7500; Length of Cut (Inch): 0.8390; Connection Type: E20; Overall Length (Inch): 1.6060; Flute Type: Spiral; Material Grade: WJ30TF; Helix Angle: 50;
• Way Oil: WL-150, 5 gal Pail
• Corner Radius End Mill: 5/8″ Dia, 3/4″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 5/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4946; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Jobber Length Drill Bit: 0.5118″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute
• Turning Insert: WNGA431TN020FV5, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Trigon, Series WNGA
• Threaded Ring Gage: M30 x 1.00 Thread, Metric, Class 4H, No Go
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4948; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Ball End Mill: 0.625″ Dia, 1″ LOC, 5 Flute, Solid Carbide 4″ OAL, 5/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Threaded Ring Gage: M30 x 3.00 Thread, Metric, Class 4H, No Go
• Corner Radius End Mill Head: 4 Flutes E16, Solid Carbide, AlTiN Coated, Series CoroMill 316
• Threaded Ring Gage: M30 x 1.00 Thread, Metric, Class 4H, Go
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4945; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill Head: 3 Flutes E16, Solid Carbide, AlTiN Coated, Series CoroMill 316
• Threaded Ring Gage: M30 x 3.00 Thread, Metric, Class 4H, Go
• Corner Radius End Mill: 5/8″ Dia, 1″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, Helix, Corner Radius End, Centercutting
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4949; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Threaded Ring Gage: M30 x 1.00 Thread, Metric, Class 6H, No Go
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• SpyroTec 25mm Head Diam, 3.8mm Cut Diam, 10mm Shank Diam, 3 Flute 90° High Speed Steel Countersink TiAlN Finish, Single End, 10mm Straight Shank, Right Hand Cut
• Threaded Ring Gage: M30 x 3.00 Thread, Metric, Class 6H, Go
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Threaded Ring Gage: M30 x 1.00 Thread, Metric, Class 6H, Go
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4953; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 1/2″ Dia, 1-1/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3-1/2″ OAL, 1/2″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Spiral Point Tap: 3/4-10, UNC, 3 Flutes, Plug, 3B, Cobalt, GLT-1 Finish 1″ Thread Length, 4.921″ OAL, Right Hand, H11, Series CU20C344
• Threaded Ring Gage: M30 x 3.00 Thread, Metric, Class 6H, No Go
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4951; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 1/2″ Dia, 1-1/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3-1/2″ OAL, 1/2″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Square End Mill: 1/2'' Dia, 3/4'' LOC, 4'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, Centercutting, RH Cut, RH Flute
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4952; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 1/8″ Dia, 0.2813″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Guhring Roughing End Mill for Aluminum 8.00mm Diameter 8.0mm Shank 19.00mm Length of Cut 63mm Overall with Coolant Thru
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4913; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4911; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.4531″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4912; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4917; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Square End Mill: 3/4'' Dia, 3-1/4'' LOC, 3/4'' Shank Dia, 6'' OAL, 5 Flutes, Solid Carbide Single End, TiCN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 220
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4915; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• S-7 Machine Oil: ISO 7, 5 gal
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4924; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4921; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4925; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4922; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Fluid: GX Cool 3890CSL, Liquid, 5 gal Pail
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4928; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: M18 x 2.50, Metric, 4 Flute, Semi-Bottoming, 6H + 0.1 Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D16 & D17, Series 4627
• Square End Mill: 1'' Dia, 1-1/4'' LOC, 1'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 1025 & Alumigator
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 9/16-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 9/16-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: High Sp
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 9/16-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: High
• Pipe Thread Plug Gage: 1-11
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4931; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 9/16-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: High Sp
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4932; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Pipe Thread Plug Gage: 1-11
• Tool Bags & Tool Totes; Closure Type: Zipper; Material: Vinyl; Nylon; Overall Width: 24; Overall Depth: 10 in; Overall Height: 19 in; Color: Yellow; Insulated: No; Features: Adjustable Straps; Outside Pockets; Heavy Vinyl Coated; Number Of Pockets: 3.000
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4462; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Tool Bags & Tool Totes; Closure Type: Zipper; Material: Canvas; Overall Width: 18; Overall Depth: 7 in; Overall Height: 17 in; Color: Orange; Insulated: No; Features: Wide Mouth; Water Resistant Base; Number Of Pockets: 4.000
• Tool Bags & Tool Totes; Closure Type: Zipper; Material: Canvas; Overall Width: 18; Overall Depth: 7 in; Overall Height: 17 in; Color: Red; Insulated: No; Features: Wide Mouth; Water Resistant Base; Number Of Pockets: 4.000
• Corner Radius End Mill: 5/8″ Dia, 15/16″ LOC, 0.12″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4465; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Tool Bags & Tool Totes; Closure Type: Zipper; Material: Vinyl; Nylon; Overall Width: 24; Overall Depth: 10 in; Overall Height: 19 in; Color: Orange; Insulated: No; Features: Adjustable Straps; Outside Pockets; Heavy Vinyl Coated; Number Of Pockets: 3.000
• Corner Radius End Mill: 5/8″ Dia, 15/16″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Hook & Loop; Shape: Rectangle; Tape Width: 1.00 in; Color: Clear; Piece Length (Inch): 2; Component Type: Dual Lock; Number Of Pieces: 100.000
• Corner Radius End Mill: 5/8″ Dia, 15/16″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Spiral Flute Tap: M16 x 2.00, Metric, 4 Flute, Modified Bottoming, 6HX Class of Fit, HSS-E, TiN Finish 4.3307″ OAL, Right Hand Flute, Right Hand Thread, D6
• Guhring Roughing End Mill for Aluminum 8.00mm Diameter 8.0mm Shank 19.00mm Length of Cut 75mm Overall with Coolant Thru
• Corner Radius End Mill: 5/8″ Dia, 15/16″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Turning Insert: CNGX1204L02518AXA 7014, Cubic Boron Nitride Uncoated Finish, Neutral, N/A Diamond, Series T-Max P