Products

• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3977; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4292; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4435; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3976; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Turning Insert: NUDNGA433 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0787″ Long, 0.0472″ Corner Radius, 55.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4510; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4239; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Turning Insert: NUDNGA431 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0984″ Long, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series NCB100
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3986; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4315; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Fluid: GX Cool 2192CM, Liquid, 5 gal Pail
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4172; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4096; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Impact Socket: 1″ Drive 6-Point, 84 mm OAL
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4511; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3984; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4119; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3983; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: 1/2-20, DIN & ANSI, 3 Flute, Semi-Bottoming, 2BX Class of Fit, High Speed Steel-E-PM, TiAlN Finish Right Hand Flute, Right Hand Thread, Series T300
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4448; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Jobber Length Drill Bit: 0.264″ Dia, 140 °, Solid Carbide TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4478; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Jobber Length Drill Bit: 0.281″ Dia, 140 °, Solid Carbide TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4225; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Jobber Length Drill Bit: 0.315″ Dia, 140 °, Solid Carbide TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.313″ Dia, 140 °, Solid Carbide TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4554; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Jobber Length Drill Bit: 0.283″ Dia, 140 °, Solid Carbide TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.4375″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4421; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Jobber Length Drill Bit: 0.295″ Dia, 140 °, Solid Carbide TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Woodruff Keyseat Cutter: 0.5″ Cut Dia, 0.125″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3949; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 1.57
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4064; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4207; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3948; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 180 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B707
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4403; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3947; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4184; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4275; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Electronic Height Gage: 12″ Max, 0.0005″ Resolution, ± 0.002″ Accuracy
• Back Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Right Hand Cut, Carbide 2.8346″ OAL, 0.0079″ Corner Radius
• Guhring Roughing End Mill for Tough Materials 16.00mm Diameter 16.0mm Shank 32.00mm Length of Cut 92mm Overall
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4418; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Back Boring Bar: 0.2756″ Min Bore, 1.8504″ Max Depth, Left Hand Cut, Carbide 2.8346″ OAL, 0.0079″ Corner Radius
• Spiral Flute Tap: 5/8-18, UNF, 5 Flute, Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H4, Series CU99C410
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4591; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4340; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Push Plates; Material: Stainless Steel; Width (Inch): 5; Overall Length (Inch): 4.50; Finish/Coating: Stainless Steel; Shape: Round; Plate Thickness: 0.1250; Touchless: No; Material: Stainless Steel; Overall Length: 4.50; Finish: Stainless Steel; Overall
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4460; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Push Plates; Material: Stainless Steel; Width (Inch): 5; Overall Length (Inch): 4.50; Finish/Coating: Stainless Steel; Shape: Round; Plate Thickness: 0.1250; Touchless: No; Material: Stainless Steel; Overall Length: 4.50; Finish: Stainless Steel; Overall
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4471; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4360; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4142; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Push Plates; Material: Stainless Steel; Width (Inch): 5; Overall Length (Inch): 4.50; Finish/Coating: Stainless Steel; Shape: Round; Plate Thickness: 0.1250; Touchless: No; Material: Stainless Steel; Overall Length: 4.50; Finish: Stainless Steel; Overall
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4370; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4590; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Spiral Flute Tap: M11 x 1.00, MF, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D5, Series C0503000
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4288; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4079; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4390; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4155; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4290; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4351; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3953; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4066; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4209; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Spiral Point Tap: Metric, 4 Flutes, Gunnose, 6HX, High Speed Steel, TiCN Finish 0.827″ Thread Length, 3.937″ OAL, Right Hand, Series 212661
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M2.5x0.45; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 00; Teeth pe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4382; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M2x0.40; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 000; Teeth
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3951; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M2x0.40; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 000; Teeth per
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4405; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M2.2x0.45; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 000; Teet
• Jobber Length Drill Bit: 0.252″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3957; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4186; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M2.5x0.45; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 00; Teeth
• Jobber Length Drill Bit: 0.2677″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M3x0.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 00; Additional
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4199; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3956; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M2.2x0.45; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 000; Teeth p
• Side Chip Saw: 4″ Blade Dia, 3/16″ Blade Thickness, 1-1/4″ Arbor Hole Dia, 36 Teeth, High Speed Steel Uncoated, Straight Tooth
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4538; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M3x0.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 00; Additio
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3955; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• White Double-Sided Foam Tape: 1″ Wide, 4 yd Long, 25 mil Thick, Acrylic Adhesive
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4262; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3954; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: M22 x 1.50, Metric, 4 Flute, Modified Bottoming, High Speed Steel-E, V Finish Right Hand Flute, Right Hand Thread, D6, Series 347
• Spiral Flute Tap: M22 x 2.50, Metric, 4 Flute, Modified Bottoming, High Speed Steel-E, V Finish Right Hand Flute, Right Hand Thread, D7, Series 347
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4395; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3959; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4330; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Spiral Flute Tap: 1/2-20, UNF, 5 Flute, Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H3, Series CU99C410
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4377; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3958; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4124; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3964; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4500; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4453; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4280; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 1/2″ Dia, 2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 38 & 41 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4257; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3962; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 1/2″ Dia, 2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 38 & 41 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4586; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 1/2″ Dia, 2″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 40 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4168; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 1/2″ Dia, 2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 40 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4341; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4231; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4484; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4344; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Electromagnet Lock Accessories; Type: 4-Button Key Fob; For Use With: Networx Remote Release Door Lock; Material: Plastic; Material: Plastic; For Use With: Networx Remote Release Door Lock; Type: 4-Button Key Fob; Accessory Type: 4-Button Key Fob; Type: 4
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4507; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4150; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4724; Length of Cut (mm): 14.4000; Connection Type: E12; Overall Length (mm): 35.9000; Centercutting: Yes; Corner Radius (mm): 1.00; Minimum Helix An
• Corner Radius End Mill: 5/8″ Dia, 1-1/2″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM7F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4497; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4724; Length of Cut (mm): 14.4000; Connection Type: E12; Overall Length (mm): 35.9000; Centercutting: Yes; Corner Radius (mm): 0.50; Minimum Helix An
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4342; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 60; Width (Inch): 0.35; Color: Natural
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4244; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4724; Length of Cut (mm): 14.4000; Connection Type: E12; Overall Length (mm): 35.9000; Centercutting: Yes; Corner Radius (mm): 3.00; Minimum Helix An
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4343; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4111; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4724; Length of Cut (mm): 14.4000; Connection Type: E12; Overall Length (mm): 35.9000; Centercutting: Yes; Corner Radius (mm): 2.00; Minimum Helix An
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4364; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 1/2; Mill Diameter (Decimal Inch): 0.5000; Connection Type: E12; Overall Length (Decimal Inch): 1.4488; Centercutting: Yes; Corner Radius (Decimal Inch): 0.0300; Minimum Helix Angle: 48;
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4724; Length of Cut (mm): 14.4000; Connection Type: E12; Overall Length (mm): 35.9000; Centercutting: Yes; Corner Radius (mm): 0.50; Minimum Helix An
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4573; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4349; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.3622″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series DC160
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4358; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.376″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series DC160
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4105; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 1/2; Mill Diameter (Decimal Inch): 0.5000; Connection Type: E12; Overall Length (Decimal Inch): 1.4488; Centercutting: Yes; Corner Radius (Decimal Inch): 0.0300; Minimum Helix Angle: 48;
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4095; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4347; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4301; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4351; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• 145° 10mm Diam 70mm OAL 2-Flute Solid Carbide Spotting Drill AlTiN Finish, 25mm Flute Length, 10mm Shank Diam, RH Cut, Series 200S
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 4'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4080; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4352; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4082; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4355; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4291; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4434; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4356; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.3976″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Spiral Point Tap: M18 x 1.5, Metric, 3 Flutes, Plug, VC-10 Finish 30 mm Thread Length, 110 mm OAL, Right Hand, D6, Series 347TI
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4598; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.4055″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4353; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Screw Machine Length Drill Bit: 0.4567″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4238; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4354; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4149; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.4449″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4567; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: 0.4016″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4345; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4357; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Spiral Flute Tap: 3/4-10, UNC, 3 Flute, 2-3 P, 2B Class of Fit, HSS-E, TICN Finish 4.9213″ OAL, Right Hand Flute, Right Hand Thread, H7
• Screw Machine Length Drill Bit: 0.4646″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4358; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4212; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4319; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4541; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4197; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4317; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4430; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4536; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4393; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide Spiral Flute, Series SCD
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Straight; Flute Type: Helical
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4449; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/16″ Dia, 0.422″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 1/8″ Dia, 0.2813″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4316; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• 3/8″ Port Coalescing Filter Polycarbonate Bowl, 0.1 Micron Rating, 5-5/8″ High
• Continuous Tape for Printer: 1/2″ x 50', Polyester, White Use with BBP33 Sign & Label Printer & BradyPrinter i3300 Industrial Label Printer
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.52″ OAL, 0.315″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4191; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4323; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Radius End Mill: 0.1969″ Dia, 0.5118″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4201; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Chamfer End Mill: 0.2244″ Dia, 0.5118″ LOC, 4 Flute, 0.0047″ Chamfer Width, Solid Carbide 2.28 mm OAL, AlTiN Coated, Centercutting
• Pipe Thread Plug Gage: 3/8-19
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4454; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.3937″ Dia, 1.1811″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.23 mm OAL, AlTiN Coated
• Plug Thread Gage: M4x0.70 Thread, 6H Class, Double End, Go & No Go Handle Included
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4423; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4326; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Corner Chamfer End Mill: 0.4724″ Dia, 1.4173″ LOC, 4 Flute, 0.0094″ Chamfer Width, Solid Carbide 3.74 mm OAL, AlTiN Coated, Centercutting
• Pipe Thread Plug Gage: 3/8-19
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4071; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Chamfer End Mill: 0.4724″ Dia, 1.4173″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.74 mm OAL, AlTiN Coated
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4327; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Plug Thread Gage: M10x1.25 Thread, 6H Class, Double End, Go & No Go Handle Included
• Corner Chamfer End Mill: 0.3937″ Dia, 0.4921″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 1.97 mm OAL, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4227; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 0.94
• Glass Cloth Tape; Width (Inch): 2; Material Type: PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 5.6000; Tensile Strength (Lb./Inch): 100.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4587; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Spiral Flute Tap: M20 x 2.50, Metric, 4 Flute, Semi-Bottoming, 6HX Class of Fit, PM-HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D7 & D8, Series 4650
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.125″ Dia, 0.156″ LOC, 4 Flute, 0.0025″ Chamfer Width, Solid Carbide 1-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.2362″ Dia, 0.5118″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.28 mm OAL, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4543; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4214; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Safe-Lock; Flute Type: Helical
• Corner Chamfer End Mill: 0.25″ Dia, 0.313″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 1-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4347; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Laser & Ultrasonic Distance Finders; Minimum Distance: 0.0625; Maximum Distance (Meters): 164; Maximum Distance (Feet): 164; Maximum Distance: 164; Distance Meter Functions: Area; Addition; Subtraction; Permanent; Volume; Min/Max; Pythagoras; Distance; Ac
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 2; End Mill Material: Solid Carbide; Overall Length: 0.94
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4329; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Electromagnet Lock Accessories; Type: Armor Door Cord; For Use With: Electrified Locks; Electric Exit Devices; Material: Stainless Steel; Material: Stainless Steel; For Use With: Electrified Locks; Electric Exit Devices; Type: Armor Door Cord; Accessory T
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4353; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: No; Flute Type: Spiral; Number Of Flutes: 8; End Mill Material: Solid Carbide; Overall Length: 0.98