Products

• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1155; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Series EP-460 Gear Oil: 5 gal Pail, ISO 460
• AW-22 Machine Oil: ISO 22, 55 gal
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1157; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Rust Inhibitor: RO-22, 55 gal Drum
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1156; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/16" Dia, 3/4" LOC, 0.0150" Radius, 5 Flute, Solid Carbide
• SpyroTec 31mm Head Diam, 4.2mm Cut Diam, 12mm Shank Diam, 3 Flute 90° Cobalt Countersink TiAlN Finish, Single End, 12mm Straight Shank, Right Hand Cut
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1158; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #000; Inner Diameter (Decimal Inch): 0.0486; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1159; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 40 ° Helix, AlTiN+ Coated, Corner Radius End, Centercutting, Series 6/44
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1182; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 5/16-18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 1; Material: High
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0014; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Spiral Flute Tap: M16 x 1.50, MF, 3 Flute, Modified Bottoming, 6HX Class of Fit, HSS-E, TiN Finish Right Hand Flute, Right Hand Thread, D6, Series C4253701
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1/4-32; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 1; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1231; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 5/16-18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 1; Material: High Sp
• Electronic Caliper: 0 to 8″, 0.0005″ Resolution, IP54 0.0015″ Accuracy, Data Output, Calibrated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1232; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1/4-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 1; Material: High Sp
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1234; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Jobber Length Drill Bit: 0.1339″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Side Chip Saw: 6″ Blade Dia, 1/4″ Blade Thickness, 1″ Arbor Hole Dia, 40 Teeth, High Speed Steel Uncoated, Staggered Tooth
• Jobber Length Drill Bit: 0.2188″ Dia, 85 °, Micron Grain Carbide Diamond Finish, 3.23″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series UDR5P1AA
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1233; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Electromagnet Lock Accessories; Type: Retractable Key Chain; For Use With: Keys; Material: Plastic; Material: Plastic; For Use With: Keys; Type: Retractable Key Chain; Accessory Type: Retractable Key Chain; Type: Retractable Key Chain
• Spiral Point Tap: 5/8-18, UNF, 3 Flutes, Plug, VC-10 Finish 1.091″ Thread Length, 3.93″ OAL, Right Hand, H3, Series 316TI
• Spiral Point Tap: 5/8-18, UNF, 3 Flutes, Plug, VC-10 Finish 1.091″ Thread Length, 3.93″ OAL, Right Hand, H4, Series 316TI
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1235; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• UHMW Film Tape: 2″ Wide, 5 yd Long, 10.2 mil Thick 40 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM7F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1219; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM7F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1218; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1217; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1216; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1215; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1214; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Straight Flutes Tap: Metric, 5 Flutes, Plug Right Hand, D6, Series 11051
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1211; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Straight Flutes Tap: 7/8-14, UNF, 5 Flutes, Plug 1.335″ Thread Length, 4.68″ OAL, Right Hand, H6, Series 10051
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1213; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0365; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1212; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1177; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Spiral Flute Tap: M24 x 1.50, Metric Fine, 4 Flute, Bottoming, 6HX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D7 & D8, Series 4631
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1176; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 3″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1175; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Grooving Insert: TKF12AS KPD001, Polycrystalline Diamond Right Hand, 2 mm Cutting Width, 5 mm Max Depth, Series KTKF
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1174; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Glass Cloth Tape; Width (Inch): 3; Material Type: UPVC; Color: Shiny Silver; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 10.5000; Tensile Strength (Lb./Inch): 36.00; Minimum Operating Temperature (F): -65.000; Maximum Operating Temper
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 3/4-16; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 3/4-16; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1173; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1172; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1255; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 3/4-16; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: High
• Plug Thread Gage: M2x0.40 Thread, 6H Class, Double End, Go & No Go Handle Included
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1257; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Plug Thread Gage: M2.2x0.45 Thread, 6H Class, Double End, Go & No Go Handle Included
• Snap Gages; Minimum Measurement (mm): 0; Maximum Measurement (Inch): 1/4; Maximum Measurement (mm): 6.40; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 1/4; Minimum Measurement (Inch): 0; Minimum Measurement (Decimal Inch): 0
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1258; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 3/4-16; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1256; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1254; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1252; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1253; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1259; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1248; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1249; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1″ Dia, 1-1/4″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 3-1/2″ OAL, 1″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1179; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1″ Dia, 1-1/4″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3-1/2″ OAL, 1″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1178; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1221; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 1-5/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 1/2″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1223; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1222; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 1-5/8″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 1/2″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1171; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 1-5/8″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 1/2″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1237; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 1-5/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 1/2″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1236; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 1-5/8″ LOC, 0.12″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 1/2″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1191; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Tapered End Mill: 20 ° per Side, 0.0413″ Small Dia, 0.4843″ LOC, 4 Flutes, Solid Carbide, Tapered End HXT Finish, Series JH724
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1192; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Tapered End Mill: 20 ° per Side, 0.087″ Small Dia, 0.4213″ LOC, 4 Flutes, Solid Carbide, Tapered End HXT Finish, Series JH724
• Tapered End Mill: 20 ° per Side, 0.0354″ Small Dia, 0.4921″ LOC, 4 Flutes, Solid Carbide, Tapered End HXT Finish, Series JH724
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1238; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Tapered End Mill: 20 ° per Side, 0.0843″ Small Dia, 0.4252″ LOC, 4 Flutes, Solid Carbide, Tapered End HXT Finish, Series JH724
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1239; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1251; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Rounding End Mill: 4 Flutes 83″ OAL, 14″ Shank Dia
• Turning Insert: CNGA431TN008FU3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1195; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 45 ° Helix, AlCrN Coated, Centercutting, Series XPR
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1197; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1198; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1196; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1194; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1199; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1247; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1246; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1243; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1245; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1244; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1241; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1242; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Spiral Flute Tap: M14 x 1.50, Metric Fine, 3 Flute, Modified Bottoming, 6H Class of Fit, TiAlN Finish 1.772″ Thread Length, 4.3307″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Spiral Flute Tap: M14 x 2.00, Metric, 3 Flute, Modified Bottoming, 6H Class of Fit, TiAlN Finish 1.772″ Thread Length, 4.3307″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Screw Machine Length Drill Bit: 0.4646″ Dia, 142 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 2XDSS
• Screw Machine Length Drill Bit: 0.437″ Dia, 142 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 2XDSS
• Screw Machine Length Drill Bit: 0.4488″ Dia, 142 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 2XDSS
• Door Damper: 9-3/4″ Closer Body Length Painted Dark Bronze Finish, Non-Handed
• Clear Double-Sided Acrylic Tape: 3/4″ Wide, 4 yd Long, 40 mil Thick, Acrylic Adhesive
• Polyester Film Tape: 2″ Wide, 72 yd Long, 3.5 mil Thick 50 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Hook & Loop; Shape: Rectangle; Tape Width: 1.00 in; Color: White; Piece Length (Inch): 3; Component Type: Hook & Loop; Number Of Pieces: 200.000
• Hook & Loop; Shape: Rectangle; Tape Width: 1.00 in; Color: Black; Piece Length (Inch): 12; Component Type: Hook & Loop; Number Of Pieces: 25.000
• Chucking Reamer: 0.403″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Coalescing Filters; Filter Type: Coalescing Filter; Port Size: 3/4; Bowl Material: Polycarbonate; Height (Decimal Inch): 9.250; Drain Type: Automatic; Cubic Feet per Minute: 42; Maximum Temperature (F): 125; Bowl Guard Material: Plastic; Sight Glass: Yes;
• Chucking Reamer: 0.41″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.392″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.387″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.405″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.398″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.412″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.401″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Chucking Reamer: 0.407″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Milling Insert: KDMB32M0ERGN, KCPK10, Cast Iron & Steel N/A Finish, 1.2598″ OAW
• Spiral Flute Tap: #12-28, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 1.57
• Polyimide Film Tape: 1″ Wide, 36 yd Long, 3 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 311 ° F
• Turning Insert: S-CNGN322 BXC90, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGN
• Chucking Reamer: 0.477″ Dia, 4″ OAL, 1-1/2″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Chucking Reamer: 0.47″ Dia, 4″ OAL, 1-3/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.187″ Cut Width, 3/8″ Shank Dia, Straight Tooth 3-3/16″ OAL, 10 Teeth, Brazed Solid Carbide, AlTiN Finish
• Slitting & Slotting Saw: 2″ Dia, 1/8″ Thick, 1/2″ Arbor Hole, 24 Teeth, Solid Carbide Bright/Uncoated
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.187″ Cut Width, 3/8″ Shank Dia, Straight Tooth 3-3/16″ OAL, 10 Teeth, Brazed Solid Carbide, AlTiN Finish
• Polytetrafluroethylene Film Tape: 3″ Wide, 5 yd Long, 4 mil Thick 19 Lb/In Tensile Strength, Rubber Adhesive, 500 ° F
• Tapered End Mill: 20 ° per Side, 6 Flutes, Solid Carbide, Tapered End SIRON-A Finish, Series JH746
• Spiral Flute Tap: M18 x 1.50, DIN 374, 4 Flute, Semi-Bottoming, 6HX Class of Fit, High Speed Steel-E-PM, TiAlN Finish Right Hand Flute, Right Hand Thread, Series T300
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 12; Centercutting: No; Flute Type: Spiral; Number Of Flutes: 5; End Mill Material: Solid Carbide; Overall Length: 1.65
• Turning Insert: VCGT333FNA3CB2 CTDCD10, Polycrystalline Diamond Diamond Coating Finish, Neutral, 0.0472″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Rotary Broaches; Type: Hexagon Broaches; Size (mm): 1.0000 in; Depth of Cut (Inch): 0.8750; Tool Material: Hardened Proprietary Alloy; Shank Size (mm): 0.7500; Shank Size (Decimal): 0.7500; Coated: Coated; Overall Length (Inch): 2.75; Broach Body Width: 1
• Turning Insert: VCGT333FNA3CB1 CTDCD10, Polycrystalline Diamond Diamond Coating Finish, Neutral, 0.0472″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Rotary Broaches; Type: Hexagon Broaches; Size (mm): 0.8750 in; Depth of Cut (Inch): 0.8750; Tool Material: Hardened Proprietary Alloy; Shank Size (mm): 0.7500; Shank Size (Decimal): 0.7500; Coated: Coated; Overall Length (Inch): 2.75; Broach Body Width: 0
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3350; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Polyimide Film Tape: 6″ Wide, 100' x 1 mil Thick Non-Adhesive, -40 to 450 ° F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3275; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Woodruff Keyseat Cutter: 1″ Cut Dia, 0.125″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3-1/8″ OAL, 12 Teeth, Brazed Solid Carbide, AlTiN Finish
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2911; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Polyimide Film Tape: 2″ Wide, 100' x 5 mil Thick Non-Adhesive, -40 to 450 ° F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3147; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Polyimide Film Tape: 4″ Wide, 50' x 5 mil Thick Non-Adhesive, -40 to 450 ° F
• Ball End Mill: 0.75″ Dia, 1.5″ LOC, 4 Flute, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3327; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Woodruff Keyseat Cutter: 1″ Cut Dia, 0.187″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3-3/16″ OAL, 12 Teeth, Brazed Solid Carbide, AlTiN Finish
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3390; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 8 Flutes, Solid Carbide Single End, CVD Finish, 10 ° Helix, RH Cut, RH Flute
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2912; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3143; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3276; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3013; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Guhring Optimized Roughing End Mill for Aluminum 16.00mm Diameter 16.0mm Shank 32.00mm Length of Cut 92mm Overall
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3017; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Combo Drill & Countersink: Metric, 120 ™, High Speed Steel Bright (Polished) Finish, Right Hand Cut
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3149; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3380; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Polyethylene Film Tape: 6″ Wide, 300' x 3 mil Thick 2,500 Lb/In Tensile Strength, Acrylic Adhesive
• Guhring Roughing End Mill for Aluminum 12.00mm Diameter 12.0mm Shank 26.00mm Length of Cut 93mm Overall with Coolant Thru
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2866; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Hand Socket: 2″ Socket, 12-Point
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2917; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2999; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3099; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3097; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3197; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2965; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3196; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Brackets; Type: Damper; Length (mm): 250.00; Width (mm): 75.00; Height (mm): 59.5000; Finish/Coating: Gray; Chrome; Zinc; Minimum Order Quantity: ABS; Steel; POM; Material: ABS; Steel; POM
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3063; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2832; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3066; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2835; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2968; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3199; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Remote Display Linear Gages; Maximum Measurement (mm): 12.7; Barrel Diameter (mm): 0.3750; Display Type: Digital LCD; Minimum Measurement (mm): 0; Minimum Measurement (Inch): 0; Minimum Measurement (Decimal Inch): 0; Barrel Diameter (Decimal Inch): 0.3750
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3065; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Double Angle Milling Cutter: 90 °, 1/2″ Cut Dia, 3/16″ Cut Width, 1″ Shank Dia, Solid Carbide 4″ OAL, Uncoated, 6 Teeth
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2834; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3198; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2967; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3371; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• 90° 20mm Diam 131mm OAL High Speed Steel Spotting Drill TiN Finish, 45mm Flute Length, 20mm Shank Diam, RH Cut, Series 568
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3068; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Hexagon Broaches; Hex Size: 7 mm; Coated: Uncoated; Broach Coating: Uncoated; Overall Length (Decimal Inch): 1.25 in; Overall Length (Inch): 1.25 in; Overall Length: 1.25 in
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2837; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Screw Machine Length Drill Bit: 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 6498
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2836; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3067; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2969; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Screw Machine Length Drill Bit: 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 6498
• Screw Machine Length Drill Bit: 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 6498
• Screw Machine Length Drill Bit: 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 6498
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3415; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Screw Machine Length Drill Bit: 0.5157″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3414; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3417; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Square End Mill: 5/8'' Dia, 1-7/8'' LOC, 5/8'' Shank Dia, 5'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, 40 ° Helix, Centercutting, RH Cut, RH Flute
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3416; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3419; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Chamfer Mill: 3 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3191; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Chamfer Mill: 0.75″ Dia, 4 Flutes, Solid Carbide 4″ OAL, 3″ Shank Dia, AlTiN Coated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3418; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2962; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3193; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2961; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3192; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3128; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3432; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3129; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3431; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3302; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3435; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3301; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3434; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3433; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3304; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3437; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3436; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3385; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3252; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3251; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3384; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.75″ Dia, 1″ LOC, 4 Flute, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 45 ° Helix, AlTiN Coated, Single End, Series XPB-NB
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3121; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2988; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2855; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3136; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3003; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3137; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Woodruff Keyseat Cutter: 0.5″ Cut Dia, 0.1874″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.2906; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability