Products

• Internal Boring Bar: 0.315″ Min Bore, 1.8504″ Max Depth, Left Hand Cut, Carbide 2.8346″ OAL, 0.0039″ Corner Radius
• Ball End Mill: 0.625″ Dia, 1″ LOC, 5 Flute, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Internal Boring Bar: 0.315″ Min Bore, 1.8504″ Max Depth, Left Hand Cut, Carbide 2.8346″ OAL, 0.0079″ Corner Radius
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0818; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 5/8″ Dia, 1″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0819; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Jobber Length Drill Bit: 0.2031″ Dia, 85 °, Micron Grain Carbide Diamond Finish, 3.23″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series UDR5P1AA
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0769; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.25″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1071; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 5/8″ Dia, 3″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1000; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 5/8″ Dia, 1″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1104; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: CNGA433FN_A6 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1103; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Plug Thread Gage: 3/4-10 Thread, 3B Class, Double End, Go & No Go Handle Included
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0962; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Plug Thread Gage: 3/4-16 Thread, 2B Class, Double End, Go & No Go Handle Included
• Plug Thread Gage: 3/4-10 Thread, 2B Class, Double End, Go & No Go Handle Included
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0961; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Plug Thread Gage: 3/4-16 Thread, 3B Class, Double End, Go & No Go Handle Included
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0789; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.1599; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: RCGW0803M0FNF8 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.1575″ Corner Radius, 0.0 &deg N/A Round, Series RCGW
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0787; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #2-64; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High Sp
• Ball End Mill: 0.75″ Dia, 3″ LOC, 2 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Chucking Reamer: 0.366″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0980; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.75″ Dia, 3″ LOC, 3 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 3/4-16; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: High Spe
• Chucking Reamer: 0.364″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0786; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1243; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• DNGA433S0415DMT KBH10B Carbide Turning Insert Uncoated, 1/2″ Inscribed Circle, 0.0469″ Corner Radius, 0.1883″ Thick, 55° Diamond
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0970; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1050; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0990; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Tapered, 1/16-27, Single End
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #2-56; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0788; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1/4-20; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 1; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0960; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0837; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.2357; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #2-64; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High
• Door Closer Accessories; For Use With: LCN 4040XP Series Door Closers; Finish/Coating: Sprayed Dark Bronze; For Use With: LCN 4040XP Series Door Closers
• Squeegees Frames & Refills; 12" BLADE LENGTH WINDOW SQUEEGEE COMBO
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1068; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Door Closer Accessories; For Use With: LCN 4040XP Series Door Closers; Finish/Coating: White; For Use With: LCN 4040XP Series Door Closers
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #2-56; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: High
• Polytetrafluroethylene Film Tape: 1/2″ Wide, 36 yd Long, 3.7 mil Thick 27 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0785; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 3/4-10; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0920; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Rust Inhibitor: RO-320, 5 gal Pail
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 3/4-16; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0930; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #2-56; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: High Sp
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0940; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Rust Inhibitor: RO-100, 5 gal Pail
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0950; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #12-32; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 0; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1105; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Series EP-120 Gear Oil: 55 gal Drum, ISO 120
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1106; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Tapered, 1/16-27, Single End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1107; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Die-Cut Label for Printer: 1″, Polypropylene, Clear Use with BradyPrinter i5100 Industrial Label Printer, BradyPrinter i7100 Industrial Label Printer & THT 3″ Core Printers
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #0-80; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High Sp
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1108; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #12-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 0; Material: High Sp
• Polyester Film Tape: 4″ Wide, 72 yd Long, 2 mil Thick 329.9 Lb/In Tensile Strength, Acrylic Adhesive, -99.4 to 500 ° F
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #2-64; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0781; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #2-56; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: High Sp
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1109; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Way Oil: WL-46, 55 gal Drum
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0782; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1/4-20; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 1; Material: High Spe
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0783; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: #2-64; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High Sp
• Pipe Thread Plug Gage: Tapered, 1/2-14
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0784; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Pipe Thread Plug Gage: Tapered, 1/2-14
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0964; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #1-64; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1062; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: #1-72; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1064; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 3/4-10; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: High
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0834; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0967; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0835; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1065; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Roughing End Mill
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0968; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1066; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1063; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Chamfer Mill: 0.625″ Dia, 4 Flutes, Solid Carbide 3-1/2″ OAL, 5″ Shank Dia, Bright/Uncoated
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0965; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.5″ Dia, 3 Flute, Solid Carbide 6″ OAL, 1/2″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Corner Rounding End Mill: 4 Flutes 83″ OAL, 12″ Shank Dia
• Corner Radius End Mill: 3/4″ Dia, 2-1/2″ LOC, 0.04″ Radius, 2 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0832; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 2-1/2″ LOC, 0.04″ Radius, 3 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Corner Chamfer End Mill: 0.394″ Dia, 4 Flute, Solid Carbide 72 mm OAL, 10 mm Shank Dia, 42 ° Helix, AlCrN Coated, Centercutting
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0833; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 0.394″ Dia, 0.079″ Radius, 4 Flutes, Solid Carbide 42 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series CoroMill Plura
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0966; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 0.394″ Dia, 0.02″ Radius, 4 Flutes, Solid Carbide 42 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series CoroMill Plura
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1061; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 0.394″ Dia, 0.039″ Radius, 4 Flutes, Solid Carbide 42 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series CoroMill Plura
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1067; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0836; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0969; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1069; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Door Closer Accessories; For Use With: Norton 7200 Series Electromechanical Closer; For Use With: Norton 7200 Series Electromechanical Closer
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0831; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1112; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1114; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.5″ Dia, 3 Flute, Solid Carbide 6″ OAL, 1/2″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0963; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.5″ Dia, 3 Flute, Solid Carbide 6″ OAL, 1/2″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Slitting & Slotting Saw: 2″ Dia, 3/32″ Thick, 1/2″ Arbor Hole, 24 Teeth, Solid Carbide Bright/Uncoated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1111; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Slitting & Slotting Saw: 2″ Dia, 1/32″ Thick, 1/2″ Arbor Hole, 24 Teeth, Solid Carbide Bright/Uncoated
• Slitting & Slotting Saw: 2″ Dia, 0.02″ Thick, 1/2″ Arbor Hole, 24 Teeth, Solid Carbide Bright/Uncoated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1113; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Slitting & Slotting Saw: 2″ Dia, 1/16″ Thick, 1/2″ Arbor Hole, 24 Teeth, Solid Carbide Bright/Uncoated
• Glass Cloth Tape; Width (Inch): 2; Material Type: PTFE; Color: Black; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 7.0000; Tensile Strength (Lb./Inch): 200.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0838; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Slitting & Slotting Saw: 2″ Dia, 0.04″ Thick, 1/2″ Arbor Hole, 24 Teeth, Solid Carbide Bright/Uncoated
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0839; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Kyocera BDGT 11T308FR KPD001 Grade PCD, Parallelogram, Negative Rake Angle, Right-Hand Milling insert for Finishing in (N) Non-Ferrous Materials and n/a
• Turning Insert: CCGT2152FNA2CB1, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: CCGT2155FNA2CB2, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Milling Insert: KDMB12M0ERSF, KCPK10, Cast Iron & Steel N/A Finish, 0.4724″ OAW
• AW-68 Machine Oil: ISO 68, 5 gal
• Screw Machine Length Drill Bit: 0.4134″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.4016″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.4219″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Gravity Conveyors; Roller Style: Roller; Shape: Round; Roller Diameter (Decimal Inch): 0.75 in; 0.75 mm; Length (Feet): 64; Wheel Material: Aluminum; Load Capacity (Lb.): 50.000; Frame Material: Galvanized Steel; Gauge: 14 ga; 14 gauge; Centerline Distanc
• Screw Machine Length Drill Bit: 1.0433″ Dia, 118 °, High Speed Steel Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 223
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: CCTV Cameras; Material: Steel; Material: Steel; For Use With: CCTV Cameras; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Side Chip Saw: 4″ Blade Dia, 1/4″ Blade Thickness, 1″ Arbor Hole Dia, 32 Teeth, High Speed Steel TiN Finish, Staggered Tooth
• 1-1/2″ Head Diam, 1/2″ Shank Diam, 82° High Speed Steel Countersink Bright Finish, 3-1/2″ OAL, Single End, Straight Shank, Right Hand Cut
• Fluid: PERKOOL 4110V, Liquid, 55 gal Drum
• Glass Cloth Tape; Width (Inch): 2; Material Type: Glass Cloth; Color: White; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 7.0000; Tensile Strength (Lb./Inch): 180.00; Maximum Operating Temperature (F): 392.000
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Side Chip Saw: 4″ Blade Dia, 3/16″ Blade Thickness, 1-1/4″ Arbor Hole Dia, 32 Teeth, High Speed Steel TiN Finish, Staggered Tooth
• Corner Radius End Mill: 5/8″ Dia, 1-9/16″ LOC, 1/8″ Radius, 6 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 5/8″ Dia, 1-9/16″ LOC, 0.12″ Radius, 6 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 5/8″ Dia, 1-9/16″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Ball End Mill: 0.625″ Dia, 4 Flute, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Single End
• Woodruff Keyseat Cutter: 1.5″ Cut Dia, 0.25″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3-1/4″ OAL, 16 Teeth, Brazed Solid Carbide, AlTiN Finish
• Spiral Flute Tap: M24 x 1.00, MF, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D6, Series C0451000
• Impact Socket: 1″ Drive 6-Point
• Mill Head Attachment Stainless Steel, For Bridgeport Type Mills
• Setup Block: 0.001 Squareness, Aluminum
• Screw Machine Length Drill Bit: 0.5079″ Dia, 150 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series A1166
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Square End Mill Heads; Mill Diameter (mm): 25.00; Mill Diameter (Decimal Inch): 0.9840; Number of Flutes: 8; Length of Cut (mm): 25.6000; Connection Type: E25; Overall Length (mm): 49.6000; Material: Solid Carbide; Finish/Coating: AlTiN/ZrN; Cutting Direc
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 1/2″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Dial Drop Indicators; Accuracy (Decimal Inch): ™.0005; Back Type: Flat; Indicator Style: Plunger; Bearing Type: Jeweled; Dial Graduation (Decimal Inch): 0.000500; Dial Reading: 0-10-0; Measuring Force (N): 0.3 to 1.8; Base Mount Type: Clamp-on; Dial Diam
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 1/2″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Spiral Flute Tap: M20 x 2.50, M, Modified Bottoming, 4H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D4, Series C0503010
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 1/2″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 1/2″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 1/2″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Chamfer Mill: 4 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, Bright/Uncoated
• S-10 Machine Oil: ISO 10, 5 gal
• Chamfer Mill: 4 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, Bright/Uncoated
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 14; Width (Inch): 0.19; Color: Yellow
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 14; Width (Inch): 0.19; Color: Gray
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 14; Width (Inch): 0.19; Color: Green
• Ball End Mill: 0.875″ Dia, 1.5″ LOC, 3 Flute, Solid Carbide 4″ OAL, 7/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.875″ Dia, 1.5″ LOC, 2 Flute, Solid Carbide 4″ OAL, 7/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Threaded Ring Gage: 13/16-20 Thread, UNEF, Class 2B, No Go
• Threaded Ring Gage: 13/16-20 Thread, UNEF, Class 2B & 3B, Go
• Guhring Universal Roughing End Mill 16.00mm Diameter 16.0mm Shank 32.00mm Length of Cut 92mm Overall
• Guhring Universal Roughing End Mill 14.00mm Diameter 14.0mm Shank 26.00mm Length of Cut 83mm Overall
• Glass Cloth Tape; Width (Inch): 12; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 3.0000; Tensile Strength (Lb./Inch): 70.00; Maximum Operating Temperature (F): 500.000
• Threaded Ring Gage: 13/16-20 Thread, UNEF, Class 3B, No Go
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Polytetrafluroethylene Film Tape: 1-1/2″ Wide, 36 yd Long, 5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Countersink Set: 5 Pc, 10.4 to 31 mm Head Dia, 3 Flute, 60 ° Included Angle 6 to 12 mm Shank Dia, 53 to 81 mm OAL, Cobalt Steel
• Die-Cut Label for Printer: 1″, Self-Laminating Vinyl, Clear & White Use with BBP33 Sign & Label Printer & BradyPrinter i3300 Industrial Label Printer
• Electromagnet Lock Accessories; Type: Infrared Touchless Exit Touchplate Switch; For Use With: Interior Applications; Material: Stainless Steel; Material: Stainless Steel; For Use With: Interior Applications; Type: Infrared Touchless Exit Touchplate Switc
• Milling Insert: ZNHW 120508SR-0003 CTD4205, CTD4205, Polycrystalline Diamond N/A Finish,
• Corner Radius End Mill: 0.4724″ Dia, 3 Flutes, Solid Carbide 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2943
• Square End Mill: 60mm LOC, 12mm Shank Dia, 110mm OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, 40 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.4724″ Dia, 3 Flutes, Solid Carbide 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2943
• Corner Radius End Mill: 0.4724″ Dia, 3 Flutes, Solid Carbide 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2943
• Fluid: GX Cool 3890CSL, Liquid, 5 gal Pail
• Series EP-150 Gear Oil: 5 gal Pail, ISO 150
• Corner Radius End Mill: 0.4724″ Dia, 3 Flutes, Solid Carbide 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2943
• Corner Radius End Mill: 3/4″ Dia, 1-5/8″ LOC, 0.125″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Polytetrafluroethylene Film Tape: 3/4″ Wide, 36 yd Long, 4 mil Thick 19 Lb/In Tensile Strength, Rubber Adhesive, 500 ° F
• Screw Machine Length Drill Bit: 0.4375″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.4449″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.7874″ Dia, 118 °, Cobalt Bright/Uncoated, Right Hand Cut, Spiral Flute
• Ball End Mill: 0.5″ Dia, 1″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Screw Machine Length Drill Bit: 0.4646″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.5″ Dia, 2″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Screw Machine Length Drill Bit: 0.1181″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.5051″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Hand Socket: 1-15/16″ Socket, 12-Point
• Square End Mill: 3/4'' Dia, 2-1/4'' LOC, 3/4'' Shank Dia, 5'' OAL, 6 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 38 ° Helix, Centercutting, RH Cut, RH Flute
• Polytetrafluroethylene Film Tape: 6″ Wide, 5 yd Long, 10 mil Thick 60 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Woodruff Keyseat Cutter: 0.5″ Cut Dia, 0.187″ Cut Width, 1/2″ Shank Dia, Staggered Tooth 3″ OAL, 8 Teeth, Solid Carbide
• Jobber Length Drill Bit: 0.4134″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute
• Woodruff Keyseat Cutter: 0.5″ Cut Dia, 0.125″ Cut Width, 1/2″ Shank Dia, Staggered Tooth 3″ OAL, 8 Teeth, Solid Carbide
• Jobber Length Drill Bit: 0.4528″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.2224; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Chest Handles; Type: Trunk Handle; Plate Width: 100.00; Plate Height: 15.000; Overall Width (mm): 115.0000; Overall Height (mm): 100.00000; Finish/Coating: Chrome; Set Screw Size: #5, 6; Bail Inside Diameter: 85.000; Additional Information: Package Quanti
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 1/8″ Radius, 6 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.12″ Radius, 6 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.02″ Radius, 6 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide Spiral Flute, Series SCD
• Ball End Mill: 0.625″ Dia, 2.25″ LOC, 3 Flute, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Screw Machine Length Drill Bit: 0.126″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Corner Chamfer End Mill: 0.4724″ Dia, 1.4173″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.74 mm OAL, AlTiN Coated
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Screw Machine Length Drill Bit: 0.125″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Screw Machine Length Drill Bit: 0.136″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Screw Machine Length Drill Bit: 0.1562″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.1″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Screw Machine Length Drill Bit: 0.1406″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting