Products

• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0452; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3844; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0501; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3914; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0453; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 0.4724″ Dia, 3 Flutes, Solid Carbide 30 ° Helix, DLC Coated, Centercutting End, Series 2973
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3857; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0634; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3660; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0633; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 0.4724″ Dia, 3 Flutes, Solid Carbide 30 ° Helix, DLC Coated, Centercutting End, Series 2973
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0587; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3901; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 0.4724″ Dia, 3 Flutes, Solid Carbide 30 ° Helix, DLC Coated, Centercutting End, Series 2973
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0632; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.062″ Cut Width, 3/8″ Shank Dia, Straight Tooth 3-1/16″ OAL, 10 Teeth, Brazed Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3958; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0631; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0459; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Milling Insert: KDMB25M0ERSF, KCPK10, Cast Iron & Steel N/A Finish, 0.9843″ OAW
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4044; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0508; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3683; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0507; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3932; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0509; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0638; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3706; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0506; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3696; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0639; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3989; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0505; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: DCGT32.51FL_A8 CTDPD20, Polycrystalline Diamond Uncoated Finish, Left Hand, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0458; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3892; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0534; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: VCGT222FR_A6 CTDPD20, Polycrystalline Diamond Uncoated Finish, Right Hand, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4031; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0667; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0401; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: DCGT32.52FR_A7 CTDPD20, Polycrystalline Diamond Uncoated Finish, Right Hand, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3772; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0666; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: VCGT222FL_A6 CTDPD20, Polycrystalline Diamond Uncoated Finish, Left Hand, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3976; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0533; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3830; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.04″ Cut Width, 3/8″ Shank Dia, Straight Tooth 3.04″ OAL, 10 Teeth, Brazed Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0402; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3785; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0535; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Ball End Mill: 0.75″ Dia, 5 Flute, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0668; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4013; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0665; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Woodruff Keyseat Cutter: 0.625″ Cut Dia, 0.156″ Cut Width, 5/8″ Shank Dia, Straight Tooth 3-1/2″ OAL, 8 Teeth, Solid Carbide
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3808; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0532; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3798; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Woodruff Keyseat Cutter: 0.625″ Cut Dia, 0.25″ Cut Width, 5/8″ Shank Dia, Straight Tooth 3-1/2″ OAL, 8 Teeth, Solid Carbide
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.12″ Radius, 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0664; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3678; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0531; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Spiral Flute Tap: 9/16-12, DIN, 4 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 1.772″ Thread Length, 4.3307″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3874; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0716; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3915; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Spiral Flute Tap: 9/16-18, DIN & ANSI, 4 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 1.772″ Thread Length, 4.3307″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0715; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0714; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3723; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0536; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3843; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0669; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0713; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3928; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0409; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0712; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3767; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Ball End Mill: 0.75″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0406; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3887; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0497; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3994; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0496; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3754; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0493; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3787; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0494; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0495; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4002; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0492; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3698; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Guhring Steel and Cast Iron Roughing End Mill 8.00mm Diameter 8.0mm Shank 24.00mm Length of Cut 75mm Overall
• Ball End Mill: 0.75″ Dia, 4 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4015; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0491; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0718; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3708; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0719; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3761; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0539; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.015″ Radius, 9 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, Altima Xtreme Coated, Corner Radius End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3685; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Ball End Mill: 0.75″ Dia, 5 Flute, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0407; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.06″ Radius, 9 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, Altima Xtreme Coated, Corner Radius End
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0711; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.01″ Radius, 9 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, Altima Xtreme Coated, Corner Radius End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0408; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3965; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3881; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0403; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.02″ Radius, 9 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, Altima Xtreme Coated, Corner Radius End
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4046; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0404; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: NUVBGA331 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0984″ Long, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series NCB100
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3792; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0537; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: NUVBGA222 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0669″ Long, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0405; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3672; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0538; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: NUVBGA332 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0669″ Long, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3921; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0485; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4033; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Turning Insert: NUDCGA32.51 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0984″ Long, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0486; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Chucking Reamer: 0.4736″ Dia, 4.7244″ OAL, 0.7874″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0487; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: NUVBGA221 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0984″ Long, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0488; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3815; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Chucking Reamer: 0.4732″ Dia, 4.7244″ OAL, 0.7874″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3978; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0489; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: NUCCGA32.51 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0984″ Long, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3828; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Chucking Reamer: 0.4713″ Dia, 4.7244″ OAL, 0.7874″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Turning Insert: NUCCGA32.52 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0945″ Long, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0661; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3894; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0662; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: NUVCGA331 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0984″ Long, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3952; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Damping Stays; Type: Heavy-Duty Soft-Closing Lid Stay; Capacity: 87.000; Overall Length (mm): 385.0000; Thickness (mm): 26; Width (mm): 70.00; Side: Right Hand; Maximum Opening: 90.000; Finish/Coating: Galvanized; Anodized; Light Gray; Mounting Hole Size
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0663; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Turning Insert: NUVCGA332 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0669″ Long, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3774; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0591; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Damping Stays; Type: Heavy-Duty Soft-Closing Lid Stay; Capacity: 87.000; Overall Length (mm): 385.0000; Thickness (mm): 26; Width (mm): 70.00; Side: Left Hand; Maximum Opening: 90.000; Finish/Coating: Galvanized; Anodized; Light Gray; Mounting Hole Size D
• Turning Insert: NUDCGA32.52 NCB100, Cubic Boron Nitride Uncoated Finish, Neutral, 0.0827″ Long, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series NCB100
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3654; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0592; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0593; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4059; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Brackets; Type: Folding Bracket with Integrated Soft Close Damper; Length (mm): 305.50; Width (mm): 26.00; Height (mm): 165.0000; Load Capacity (Lb.): 330.000; Finish/Coating: Electro Polished; Minimum Order Quantity: 304 Stainless Steel; Material: 304 St
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0636; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Tool Aprons & Tool Belts; Tool Type: Tool Rig; Minimum Waist Size: 29; Maximum Waist Size: 46; Material: Polyester; Leather; Number of Pockets: 27.000; Color: Black; Minimum Order Quantity: Polyester; Leather; Tool Style: Tool Rig; Minimum Waist Size: 29
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3996; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Damping Stays; Type: Medium-Duty Soft-Closing Lid Stay; Capacity: 65.000; Overall Length (mm): 385.0000; Thickness (mm): 26; Width (mm): 70.00; Side: Left Hand; Maximum Opening: 90.000; Finish/Coating: Galvanized; Anodized; Light Gray; Mounting Hole Size
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0503; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3859; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.09″ Radius, 7 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0637; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Damping Stays; Type: Medium-Duty Soft-Closing Lid Stay; Capacity: 65.000; Overall Length (mm): 385.0000; Thickness (mm): 26; Width (mm): 70.00; Side: Right Hand; Maximum Opening: 90.000; Finish/Coating: Galvanized; Anodized; Light Gray; Mounting Hole Size
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3934; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3726; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0504; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0473; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3846; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0526; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0658; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0524; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3903; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4028; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0653; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0521; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3757; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0654; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3680; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0522; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0655; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3877; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3668; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0652; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3730; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0656; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0523; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3860; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0657; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3731; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0525; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3788; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0659; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Milling Insert: ZNHW 1205EOER-1002 CTL3215, CTL3215, Cubic Boron Nitride N/A Finish,
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0474; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3799; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0475; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3984; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0476; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0477; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4047; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0478; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3862; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0479; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3666; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0651; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3786; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0717; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 3/4″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3997; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0528; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 3/4″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0701; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.4003; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0702; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Corner Radius End Mill: 1/2″ Dia, 3/4″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3809; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.0529; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.3995; Overall Length (Decimal Inch): 2.0000; Calibrated: Yes; Traceability