Products

• Corner Radius End Mill: 5/8″ Dia, 1″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Corner Radius End Mill: 5/8″ Dia, 1″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Water & Discharge Hose; 50' SNGL JACKET WILDLAND FIRE HOSE
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0016; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0101; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill: 1″ Dia, 2″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/4″ Dia, 3-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 3/4″ Dia, 3-1/4″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 3/4″ Dia, 3-1/4″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 0.75″ Dia, 5 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 5 Flutes Helix
• Corner Radius End Mill: 3/4″ Dia, 3-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 3/4″ Dia, 1-1/4″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 0.75″ Dia, 5 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Corner Chamfer End Mill: 0.625″ Dia, 0.781″ LOC, 4 Flute, 0.0125″ Chamfer Width, Solid Carbide 2-1/2″ OAL, 5/8″ Shank Dia, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 2.52″ OAL, 0.315″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.52″ OAL, 0.315″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.7874″ Dia, 2.3622″ LOC, 5 Flute, 0.0236″ Chamfer Width, Solid Carbide 5.24 mm OAL, AlTiN Coated
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 4 Flute, 0.0063″ Chamfer Width, Solid Carbide 2.52 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.1969″ Dia, 0.5118″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.3031″ Dia, 0.748″ LOC, 4 Flute, 0.0063″ Chamfer Width, Solid Carbide 2.52 mm OAL, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.7874″ Dia, 2.3622″ LOC, 4 Flute, 0.0157″ Chamfer Width, Solid Carbide 5.24 mm OAL, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.7087″ Dia, 2.126″ LOC, 5 Flute, 0.0197″ Chamfer Width, Solid Carbide 4.84 mm OAL, AlTiN Coated
• Corner Chamfer End Mill: 0.3125″ Dia, 0.391″ LOC, 4 Flute, 0.0064″ Chamfer Width, Solid Carbide 2″ OAL, 5/16″ Shank Dia, AlTiN Coated, Centercutting
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 8; End Mill Material: Solid Carbide; Overall Length: 1.26
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 0.79
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Electromagnet Lock Accessories; Type: Touch Sensor Plate; For Use With: Automatic Door Operators; Indoor or Outdoor Applications; Material: Steel; Material: Steel; For Use With: Automatic Door Operators; Indoor or Outdoor Applications; Type: Touch Sensor
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Square End Mill: 7/8'' Dia, 3'' LOC, 7/8'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, TiCN Finish, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M20x1.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Teeth p
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M20x1.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Teeth per
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M20x1.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Teeth p
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M20x1.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Teeth per
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M20x2.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Teeth p
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M20x2.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Teeth per
• Corner Chamfer End Mill: 0.5394″ Dia, 1.0236″ LOC, 4 Flute, 0.011″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.6142″ Dia, 1.2598″ LOC, 4 Flute, 0.0126″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.1″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.5512″ Dia, 1.0236″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.5512″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill Head: 1-1/2″ LOC, 5 Flutes Solid Carbide, nano-A Coated, Series 6990
• Corner Radius End Mill: 0.5512″ Dia, 1.0236″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.5512″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 4 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series XP-NB
• Electromagnet Lock Accessories; Type: Pushplate; For Use With: 6000; 6300 Low Energy Power Door Operator; 5600; 5700; Material: Stainless Steel; Material: Stainless Steel; For Use With: 6000; 6300 Low Energy Power Door Operator; 5600; 5700; Type: Pushplat
• Electromagnet Lock Accessories; Type: Pushplate; For Use With: 6000; 6300 Low Energy Power Door Operator; 5600; 5700; Material: Stainless Steel; Material: Stainless Steel; For Use With: 6000; 6300 Low Energy Power Door Operator; 5600; 5700; Type: Pushplat
• Door Closer Accessories; For Use With: LCN 4110 Series Door Closers; Body Length: 12.75; Finish/Coating: Sprayed Aluminum; For Use With: LCN 4110 Series Door Closers
• Adjustable Concealed Cabinet Hinge: Zinc Alloy & Stainless Steel, White Finish
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.2007; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0926; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• CNC Storage Accessories; For Use With: Magazine Cabinet; Description: 12 pcs. Mountings for drawer (Plastic blue) sufficient for 1 drawer at the magazine cabinet
• CNC Storage Accessories; For Use With: Shelf Module with Hood; Description: Additional shelf for chelf cabinet with stop bar white RAL9010
• Jobber Length Drill Bit: 0.5312″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.88″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.4646″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Jobber Length Drill Bit: 0.5469″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.88″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.5156″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.88″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.5315″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 4.8819″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Poly Mailer: Pouch, 10″ OAW, 13″ OAL, 1,000 Pk
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Glass Cloth Tape; Width (Inch): 6; Material Type: PTFE; Color: Light Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 6.8000; Tensile Strength (Lb./Inch): 290.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temper
• UHMW Film Tape: 3″ Wide, 5 yd Long, 7.7 mil Thick 45 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Cylinders; Type: Interchangeable Core; Keying: C Keyway; Number of Pins: 6; Finish/Coating: Satin Chrome; Minimum Order Quantity: Brass; Material: Brass; Type: Interchangeable Core; Material: Brass
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide TiAlSiN Finish, Spiral Flute, Series DC175-03-A1
• Drill Bit Adapters; Adapter Type: Drill Sleeve; Adapter Shank Type: Straight; Drill Bit Type Compatibility: Standard Drill Bits; Adapter Material: High Speed Steel
• Ball End Mill: 0.875″ Dia, 3″ LOC, 3 Flute, Solid Carbide 6″ OAL, 7/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Electromagnet Lock Accessories; Type: Access Control Keypad; For Use With: Access Control Applications; Material: Aluminum; Material: Aluminum; For Use With: Access Control Applications; Type: Access Control Keypad; Accessory Type: Access Control Keypad;
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• UHMW Film Tape: 3″ Wide, 5 yd Long, 10.2 mil Thick 40 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Corner Radius End Mill: 5/8″ Dia, 3″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 5/8″ Dia, 3″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Chamfer End Mill: 0.2362″ Dia, 0.7087″ LOC, 4 Flute, 0.0047″ Chamfer Width, Solid Carbide 2.44 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 3/16″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Screw Machine Length Drill Bit: 0.4921″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Pipe Thread Plug Gage: 1/8-28, Double End
• Screw Machine Length Drill Bit: 0.5354″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1/4-20; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 1; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 5/16-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 1; Material: H
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 5/16-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 1; Material: H
• Screw Machine Length Drill Bit: 0.4882″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 5/16-18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 1; Material: H
• Screw Machine Length Drill Bit: 0.4764″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1/4-28; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 1; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 5/16-18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 1; Material: H
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1/4-28; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 1; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1/4-20; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 1; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 5/8-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: High Sp
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 5/8-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: High Sp
• Pipe Thread Plug Gage: Tapered, 1/4-18, Single End
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 5/8-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: High
• Pipe Thread Plug Gage: Tapered, 3/8-18, Single End
• Pipe Thread Plug Gage: Tapered, 1/8-27, Single End
• Pipe Thread Plug Gage: Tapered, 1/16-27, Single End
• Turning Insert: RCGW1204M0FNF12, Polycrystalline Diamond Uncoated Finish, Neutral, 0.2362″ Corner Radius, 0.0 &deg N/A Round, Series RCGW
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 5/8-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: High
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Wrench Sets; Set Type: Ratcheting Combination Wrench; System Of Measurement: Metric; Container Type: Pouch; Wrench Size: 8 to 19 mm; Material: Alloy Steel; Chrome; Finish: Chrome-Plated; Overall Length: 11.2205 in; Non-sparking: No; Corrosion-resistant: N
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Tapered End Mill: 20 ° per Side, 6 Flutes, Solid Carbide, Tapered End SIRON-A Finish, Series JH736
• Deadbolts; Type: Double Cylinder; Door Thickness Range: 1-3/4-2; Lock Type: Double Cylinder; Finish/Coating: Antique Bronze; Oil Rubbed Bronze; Hand Orientation: Non-Handed; Lock Override: Key; Cylinder: 6 or 7 Pin; Additional Information: Core Not Includ
• Deadbolts; Type: Double Cylinder; Door Thickness Range: 1-3/4-2; Lock Type: Double Cylinder; Finish/Coating: Antique Bronze; Oil Rubbed Bronze; Hand Orientation: Non-Handed; Lock Override: Key; Cylinder: 6 or 7 Pin; Additional Information: Core Not Includ
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Drill Mill: 7/8″ Dia, 4 Flutes, 90 ° Point, Solid Carbide 4″ OAL, 7″ Shank Dia, AlTiN Finish
• Polytetrafluroethylene Film Tape: 3″ Wide, 5 yd Long, 6.8 mil Thick 49 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• 8'6″ x 1/16″ x 150' Heavy-Duty Fire-Retardant Multi-Purpose Net Polyethylene, White
• 8'6″ x 1/6″ x 150' Heavy-Duty Fire-Retardant Multi-Purpose Net Polyethylene, Black
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0708; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 1 500-Piece 5″ Diam Round Clear Polypropylene Snap-On Lid For Use with Food Boxes
• Jobber Length Drill Bit: 0.4449″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.4063″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.4528″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.3976″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Side Chip Saw: 6″ Blade Dia, 7/32″ Blade Thickness, 1-1/4″ Arbor Hole Dia, 40 Teeth, High Speed Steel Uncoated, Staggered Tooth
• Ball End Mill: 0.1575″ Dia, 0.25″ LOC, 1 Flute, Polycrystalline Diamond 50 mm OAL, 4 mm Shank Dia, 0 ° Helix, Polycrystaline Diamond Coated, Single End, Series DEB
• Turning Insert: DCGT21.51FN_A3 CTDMD05, Polycrystalline Diamond Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: DCGT21.5.5FNA3 CTDMD05, Polycrystalline Diamond Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: DCGT32.51FN_A3 CTDMD05, Polycrystalline Diamond Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: DCGT32.52FN_A3 CTDMD05, Polycrystalline Diamond Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Glass Cloth Tape; Width (Inch): 12; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 5.0000; Tensile Strength (Lb./Inch): 120.00; Maximum Operating Temperature (F): 500.000
• Remote Display Linear Gages; Maximum Measurement (Inch): 4; Maximum Measurement (mm): 100; Barrel Diameter (mm): 0.3750; Display Type: Digital LCD; Minimum Measurement (mm): 0; Accuracy (Decimal Inch): 0.0003; Maximum Measurement (Decimal Inch): 4; Minimu
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0234; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0367; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Drawer Slides; Type: Drawer Slide; Extension Style: Full; Slide Length: 508.00; Travel Length: 551.60; Load Capacity (Lb.): 114.000; Width (Inch): 0.76; Finish/Coating: Zinc Plated; Additional Information: Mounting Type: Side; Closure Type: Conventional;
• Polyethylene Film Tape: 6″ Wide, 100 yd Long, 3 mil Thick 2,500 Lb/In Tensile Strength, Acrylic Adhesive
• Polytetrafluroethylene Film Tape: 10″ Wide, 5 yd Long, 5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Key Blanks; Type: Sargent; Material: Brass; Minimum Order Quantity: Brass; Material: Brass; Type: Sargent; Material: Brass
• Key Blanks; Type: Sargent; Minimum Order Quantity: Brass; Material: Brass; Type: Sargent; Material: Brass
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 9/16-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: High S
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 9/16-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: Hig
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 9/16-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: High S
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 9/16-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: Hig
• Corner Radius End Mill: 5/8″ Dia, 2-1/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, 40 ° Helix, Altima Q Coated, Corner Radius End
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 1″ Dia, 4 Flute, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill Power Series; Number Of Flutes: 4; Overall Length: 1.57
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 0.79
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 0.79
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Side Chip Saw: 5″ Blade Dia, 3/32″ Blade Thickness, 1″ Arbor Hole Dia, 36 Teeth, High Speed Steel TiN Finish, Staggered Tooth
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.125″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide
• Electromagnet Lock Accessories; Type: Stand Alone Digital Indoor Keypad; For Use With: Interior Applications; Material: Stainless Steel; Material: Stainless Steel; For Use With: Interior Applications; Type: Stand Alone Digital Indoor Keypad; Accessory Typ
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.1875″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide
• Electromagnet Lock Accessories; Type: Magnetic Clearance Card; For Use With: Arial Emergency Call System; Material: Plastic; Material: Plastic; For Use With: Arial Emergency Call System; Type: Magnetic Clearance Card; Accessory Type: Magnetic Clearance Ca
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.25″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.093″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.062″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.078″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide
• Turning Insert: S-SNGN433 BXC90, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 90.0 &deg N/A Square, Series SNGN
• Turning Insert: S-SNGN432 BXC90, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 90.0 &deg N/A Square, Series SNGN
• Key Blanks; Type: Schlage; Minimum Order Quantity: Brass; Material: Brass; Type: Schlage; Material: Brass
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 20.00; Mill Diameter (Decimal Inch): 0.7870; Length of Cut (mm): 40.3000; Connection Type: E20; Overall Length (mm): 59.8000; Flute Type: Spiral; Material Grade: WJ30RD; Helix Angle: 50; C
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 20.00; Mill Diameter (Decimal Inch): 0.7870; Length of Cut (mm): 40.3000; Connection Type: E20; Overall Length (mm): 59.8000; Flute Type: Spiral; Material Grade: WJ30RA; Helix Angle: 50; C
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPV
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Drawer Slides; Type: Drawer Slide; Extension Style: Full; Slide Length: 355.80; Travel Length: 369.80; Load Capacity (Lb.): 590.000; Width (Inch): 0.91; Finish/Coating: Zinc Plated; Additional Information: Mounting Type: Side; Closure Type: Conventional;
• Slitting & Slotting Saw: 3″ Dia, 1/8″ Thick, 1″ Arbor Hole, 30 Teeth, Solid Carbide Bright/Uncoated
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill: 0.6299″ Dia, 3 Flutes, Solid Carbide 30 ° Helix, DLC Coated, Centercutting End, Series 2973
• Corner Radius End Mill: 3/8″ Dia, 1-7/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3-3/4″ OAL, 3/8″ Shank Dia, 42 ° Helix, TiAlSiN Coated, Corner Radius End, Series CoroMill Plura
• Corner Radius End Mill: 3/8″ Dia, 1-7/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 3-3/4″ OAL, 3/8″ Shank Dia, 42 ° Helix, TiAlSiN Coated, Corner Radius End, Series CoroMill Plura
• Corner Radius End Mill: 0.394″ Dia, 0.039″ Radius, 5 Flutes, Solid Carbide 42 ° Helix, TiAlSiN Coated, Corner Radius End, Series CoroMill Plura
• Corner Radius End Mill: 0.394″ Dia, 0.079″ Radius, 5 Flutes, Solid Carbide 42 ° Helix, TiAlSiN Coated, Corner Radius End, Series CoroMill Plura
• Corner Radius End Mill: 0.394″ Dia, 0.02″ Radius, 5 Flutes, Solid Carbide 42 ° Helix, TiAlSiN Coated, Corner Radius End, Series CoroMill Plura
• Polyimide Film Tape: 12″ Wide, 1' x 3.3 mil Thick Acrylic Adhesive, -40 to 450 ° F
• Polyimide Film Tape: 12″ Wide, 1' x 7.3 mil Thick Acrylic Adhesive, -40 to 450 ° F
• Corner Radius End Mill: 3/4″ Dia, 1-1/8″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 3/4″ Dia, 1-1/8″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.062″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SM5F-NB
• Jobber Length Drill Bit: 0.5626″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Lockset Accessories; Type: Service Equipment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: Service Equipment; For Use With: Best
• Spiral Flute Tap: #1-12, UNF, 4 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, TICN Finish 1.102″ Thread Length, 5.512″ OAL, Right Hand Flute, Right Hand Thread, H5, Series CU459611
• Side Chip Saw: 6″ Blade Dia, 0.1094″ Blade Thickness, 1″ Arbor Hole Dia, 42 Teeth, High Speed Steel Uncoated, Straight Tooth
• Straight Flutes Tap: 3/4-16, UNF, 5 Flutes, Modified Bottoming, 2BX, Powdered Metal High Speed Steel, TiAlN Finish 0.984″ Thread Length, 4.331″ OAL, Right Hand, Series MTS
• White Double-Sided Foam Tape: 6″ Wide, 5 yd Long, 25 mil Thick, Acrylic Adhesive
• Electromagnet Lock Accessories; Type: Audible Horn Remote Monitor Station; For Use With: Access Control Devices; Material: Stainless Steel; Material: Stainless Steel; For Use With: Access Control Devices; Type: Audible Horn Remote Monitor Station; Accesso
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Ball End Mill: 0.625″ Dia, 3 Flute, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 5/8″ Dia, 1-1/2″ LOC, 1/8″ Radius, 3 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 45 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 5/8″ Dia, 1-1/2″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 45 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 5/8″ Dia, 1-1/2″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 45 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 5/8″ Dia, 1-1/2″ LOC, 0.09″ Radius, 3 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 45 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 5/8″ Dia, 1-1/2″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 45 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 0.093″ Dia, 0.187″ LOC, 1 Flute, Brazed Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 0 ° Helix, Polycrystaline Diamond Coated, Single End
• Corner Radius End Mill: 1″ Dia, 1-3/4″ LOC, 0.04″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.472″ Dia, 0.02″ Radius, 4 Flutes, Solid Carbide 38 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Plura
• Corner Radius End Mill: 1″ Dia, 1-3/4″ LOC, 0.04″ Radius, 2 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Corner Chamfer End Mill: 0.472″ Dia, 4 Flute, Solid Carbide 83 mm OAL, 12 mm Shank Dia, 38 ° Helix, AlTiN Coated, Centercutting
• Pipe Thread Plug Gage: Tapered, 1-1/4-11-1/2
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.87 mm OAL, AlTiN Coated, Centercutting
• Pipe Thread Plug Gage: Tapered, 1-1/4-11-1/2
• Corner Radius End Mill: 0.4724″ Dia, 4 Flutes, Solid Carbide 38 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series 2S342
• Ball End Mill: 0.625″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 5/8″ Shank Dia, Variable ° Helix, AlCrN Coated, Single End
• Jobber Length Drill Bit: 0.3937″ Dia, 140 °, Solid Carbide AdvaTech Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series 4005 ECODRILL
• Jobber Length Drill Bit: 0.3543″ Dia, 140 °, Solid Carbide AdvaTech Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series 4005 ECODRILL
• Jobber Length Drill Bit: 0.374″ Dia, 140 °, Solid Carbide AdvaTech Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series 4005 ECODRILL
• 120° 25mm Diam 151mm OAL High Speed Steel Spotting Drill TiN Finish, 53mm Flute Length, 25mm Shank Diam, RH Cut, Series 567
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPV
• Electromagnet Lock Accessories; Type: Pushplate; For Use With: Outdoor Environments or Wash-Down Applications; Material: Stainless Steel; Material: Stainless Steel; For Use With: Outdoor Environments or Wash-Down Applications; Type: Pushplate; Accessory T
• Electromagnet Lock Accessories; Type: Pushplate; For Use With: Outdoor Environments or Wash-Down Applications; Material: Stainless Steel; Material: Stainless Steel; For Use With: Outdoor Environments or Wash-Down Applications; Type: Pushplate; Accessory T
• Electromagnet Lock Accessories; Type: Pushplate; For Use With: Outdoor Environments or Wash-Down Applications; Material: Stainless Steel; Material: Stainless Steel; For Use With: Outdoor Environments or Wash-Down Applications; Type: Pushplate; Accessory T
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPV
• Ball End Mill: 0.875″ Dia, 2.25″ LOC, 2 Flute, Solid Carbide 5″ OAL, 7/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Piano Hinge: Full Surface, 4″ Wide, 83″ Long, 0.112″ Thick Aluminum, Clear Anodized Finish
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide TiAlSiN Finish, Spiral Flute, Series DC175-03-A1