Products

• WEDM Rails; Length (mm): 645.00; Width (mm - 2 Decimals): 86.00; Height (mm): 36.0000; Material: Stainless Steel; Series: RHS- 3R
• Saw Machine Parts & Accessories; Accessory Type: Circular Cutting Attachment; For Use With: 4V-36 Vertical Bandsaw; For Use With: 4V-36 Vertical Bandsaw
• Tapered Hole Threaded Inserts; Product Type: Double Vane; System of Measurement: Metric; Thread Size (mm): M6x1.0; Overall Length (Decimal Inch): 0.5000; Thread Size: M6x1.0 mm; Insert Diameter (Decimal Inch): 0.3750; Pilot Diameter (Decimal Inch): 0.3320
• Classroom Intruder Lever Lockset for 1-3/4 to 2-1/4″ Thick Doors 6 or 7 Pin Best & Compatible, 2-3/4″ Backset, Satin Chrome\xB6Antimicrobial Coated Finish
• Circuit Breakers; Circuit Breaker Type: Miniature Circuit Breaker; Amperage: 100; Voltage: 480V, 277V; Wire Size (AWG): 12-2/0 (Aluminum)/14-2/0 (Copper); Number Of Poles: 3; Tripping Mechanism: Thermal-Magnetic; Terminal Connection Type: Lug; Phase: Sing
• Passage Lever Lockset for 1-3/4″ Thick Doors 6 or 7 Pin Best & Compatible, 2-3/4″ Backset, Satin Chrome\xB6Antimicrobial Coated Finish
• Solenoid Valve:
• Snap Gages; Minimum Measurement (mm): 193.70; Maximum Measurement (Inch): 8-1/8; Maximum Measurement (mm): 206.4; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 8-1/8; Minimum Measurement (Inch): 7-5/8; Minimum Measurement (Decimal Inch
• Snap Gages; Minimum Measurement (mm): 206.40; Maximum Measurement (Inch): 8-5/8; Maximum Measurement (mm): 219.1; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 8-5/8; Minimum Measurement (Inch): 8-1/8; Minimum Measurement (Decimal Inch
• Ring Pipe Thread Gages; Thread Size: 2-1/2-8; Classification: 6 Step; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: ANPT; Additional Information: Specification Met: SAE AS71051; Thread Size (Inch): 2-1/2-8
• Knob Locksets; Type: Passage; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1-3/8"
• Polytetrafluroethylene Film Tape: 3/8″ Wide, 36 yd Long, 6.8 mil Thick 49 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Masking Tape: 6″ Wide, 60 yd Long, 5.9 mil Thick, Tan Crepe Paper, Rubber Adhesive, 27 lb/in Tensile Strength
• Masking Tape: 100 mm Wide, 55 m Long, 7.6 mil Thick, Tan Crepe Paper, Rubber Adhesive, 28 lb/in Tensile Strength
• Turning Insert: WNMG542-MP5 WPP20G, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.4280″ Long, 5/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Trigon, Series WNMG-MP5
• Corner Radius End Mill: 1″ Dia, 2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1″ Dia, 2″ LOC, 1/4″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Screw Machine Length Drill Bit: 0.6094″ Dia, 135 °, Solid Carbide Coated, Straight-Cylindrical Shank, Series MDW-HGS
• Screw Machine Length Drill Bit: 0.625″ Dia, 135 °, Solid Carbide Coated, Straight-Cylindrical Shank, Series MDW-HGS
• UHMW Film Tape: 3″ Wide, 5 yd Long, 15.2 mil Thick 55 Lb/In Tensile Strength, Rubber Adhesive, 225 ° F
• Jobber Length Drill Bit: 0.1575″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Polyethylene Film Tape: 12″ Wide, 1,000' x 3 mil Thick 3,800 Lb/In Tensile Strength, Water Based Acrylic Adhesive
• Jobber Length Drill Bit: 0.068″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 5'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Square End Mill: 3/4'' Dia, 1-1/2'' LOC, 3/4'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Straight Flutes Tap: Metric, 5 Flutes, Modified Bottoming, 6HX, Powdered Metal High Speed Steel, TiAlN Finish Right Hand, Series MTS
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 5'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Square End Mill: 1'' Dia, 2-1/4'' LOC, 1'' Shank Dia, 5'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Corner Rounding End Mill: 4 Flutes 92″ OAL, 16″ Shank Dia
• Square End Mill: 1'' Dia, 2-1/4'' LOC, 1'' Shank Dia, 5'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 5/8″ Dia, 25/32″ LOC, 0.12″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 5/8″ Dia, 25/32″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Spiral Flute Tap: M22 x 1.50, Metric, 4 Flute, Modified Bottoming, VC-10, V Finish Right Hand Flute, Right Hand Thread, D6, Series 348Ti
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide TiAlSiN Finish, Spiral Flute, Series DC175-03-A1
• Duct Tape: 2″ Wide, 2.6 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.15″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.12″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2106
• Threaded Ring Gage: 1-1/8-18 Thread, UNEF, Class 3B, Go & No Go
• Jobber Length Drill Bit: 0.5469″ Dia, 150 °, Solid Carbide Bright/Uncoated, 5″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 229
• Square End Mill: 3/4'' Dia, 3'' LOC, 3/4'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Corner Chamfer End Mill: 0.7677″ Dia, 1.4961″ LOC, 4 Flute, 0.0157″ Chamfer Width, Solid Carbide 4.13 mm OAL, AlTiN Coated, Centercutting
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Safe-Lock; Flute Type: Helical
• Corner Radius End Mill: 0.1969″ Dia, 0.5118″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill Power Series; Number Of Flutes: 4; Overall Length: 1.26
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 1.26
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 8; Overall Length: 1.26
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Gate Latches
• Square End Mill: 3/4'' Dia, 2'' LOC, 3/4'' Shank Dia, 6'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN+ Finish, Spiral Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series 6/44
• Ball End Mill: 0.1181″ Dia, 0.25″ LOC, 1 Flute, Polycrystalline Diamond 38 mm OAL, 3 mm Shank Dia, 0 ° Helix, Polycrystaline Diamond Coated, Single End, Series DEB
• Ball End Mill: 0.125″ Dia, 0.25″ LOC, 1 Flute, Polycrystalline Diamond 1-1/2″ OAL, 1/8″ Shank Dia, 0 ° Helix, Polycrystaline Diamond Coated, Single End, Series DEB
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.0787″ Dia, 0.2756″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.12″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.0787″ Dia, 0.2756″ LOC, 4 Flute, 0.0016″ Chamfer Width, Solid Carbide 2.28 mm OAL, AlTiN Coated, Centercutting
• Square End Mill: 3/4'' Dia, 3'' LOC, 3/4'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, 40 ° Helix, Centercutting, RH Cut, RH Flute
• Electromagnet Lock Accessories; Type: Proximity Card Reader; For Use With: Access Control Panel; Material: Plastic; Material: Plastic; For Use With: Access Control Panel; Type: Proximity Card Reader; Accessory Type: Proximity Card Reader; Type: Proximity
• Electromagnet Lock Accessories; Type: Proximity Card Reader; For Use With: Access Control Panel; Material: Plastic; Material: Plastic; For Use With: Access Control Panel; Type: Proximity Card Reader; Accessory Type: Proximity Card Reader; Type: Proximity
• Die-Cut Label for Printer: 1/2″, Self-Laminating Vinyl, Clear & White Use with IP Series Printer, BradyPrinter i5100 Industrial Label Printer, BradyPrinter i7100 Industrial Label Printer & THT 3″ Core Printers
• Ball End Mill: 0.625″ Dia, 4 Flute, Solid Carbide 3″ OAL, 5/8″ Shank Dia, 35 & 38 ° Helix, AlCr Coated, Single End, Series 2919L
• Spiral Flute Tap: BSP, 4 Flute, Semi-Bottoming, X Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, Series 0395
• Spiral Flute Tap: 7/8-14, DIN & ANSI, 4 Flute, Modified Bottoming, 2B Class of Fit, Black Oxide Finish 2.362″ Thread Length, 5.5118″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• Spiral Flute Tap: 7/8-9, DIN, 4 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 2.362″ Thread Length, 5.5118″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• Countersink Set: 5 Pc, 5/16 to 1″ Head Dia, 60 ° Included Angle 1/4 to 3/8″ Shank Dia, 1-7/8 to 3″ OAL, Bright (Polished) Finish, Cobalt Steel
• Countersink Set: 5 Pc, 5/16 to 1″ Head Dia, 82 ° Included Angle 1/4 to 3/8″ Shank Dia, 1-5/8 to 2-5/8″ OAL, Bright (Polished) Finish, Cobalt Steel
• Jobber Length Drill Bit: 0.4531″ Dia, 140 °, Solid Carbide AlTiN Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B211
• Jobber Length Drill Bit: 0.4688″ Dia, 140 °, Solid Carbide AlTiN Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B211
• Jobber Length Drill Bit: 0.4219″ Dia, 140 °, Solid Carbide AlTiN Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B211
• Jobber Length Drill Bit: 0.4063″ Dia, 140 °, Solid Carbide AlTiN Finish, 4.6457″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B211
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 20.00; Mill Diameter (Decimal Inch): 0.7870; Length of Cut (mm): 28.3000; Connection Type: E20; Overall Length (mm): 47.8000; Flute Type: Spiral; Material Grade: WIS10; Helix Angle: 35; Cu
• 3/4″ Diam 5-Flute 35/38° Solid Carbide 0.012″ Corner Chamfer Roughing & Finishing End Mill AlCr Finish, 1-1/2″ LOC, 4″ OAL, 3/4″ Shank Diam, Centercutting, Standard Length
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-7/16-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Teeth p
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-7/16-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Teeth p
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-7/16-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Teeth per
• Snap Gages; Minimum Measurement (mm): 38.10; Maximum Measurement (Inch): 1-3/4; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 1-3/4; Minimum Measurement (Inch): 1-1/2; Minimum Measurement (Decimal Inch): 1-1/2
• Snap Gages; Minimum Measurement (mm): 31.80; Maximum Measurement (Inch): 1-1/2; Maximum Measurement (mm): 38.1; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 1-1/2; Minimum Measurement (Inch): 1-1/4; Minimum Measurement (Decimal Inch):
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-7/16-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Teeth per
• Die-Cut Label for Printer: 1″, Polyester, Clear Use with BradyPrinter i5100 Industrial Label Printer, BradyPrinter i7100 Industrial Label Printer & THT 3″ Core Printers
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Tapered End Mill: 20 ° per Side, 6 Flutes, Solid Carbide, Tapered End SIRON-A Finish, Series JH746
• Spiral Flute Tap: 5/8-18, DIN & ANSI, 4 Flute, Semi-Bottoming, 2BX Class of Fit, High Speed Steel-E-PM, TiAlN Finish Right Hand Flute, Right Hand Thread, Series T300
• Corner Radius End Mill: 1″ Dia, 2″ LOC, 1/4″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1″ Dia, 2″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1″ Dia, 2″ LOC, 0.19″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1″ Dia, 2″ LOC, 0.12″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Label Maker & Tape Accessories; For Use With: TD-4410D; TD-4420DN; TD-4420DNP; TD-4420DNC; TD-4550DNWB 4 in Label Printers; Description: Replacement Auto Cutter Kit
• Coalescing Filters; Filter Type: Coalescing Filter; Maximum Working Pressure (psi): 250 psi; Port Size: 1/2; Bowl Material: Metal; Width (Decimal Inch): 1.97 in; Height (Inch): 250 psi; Micron Rating: 0.01 ™m; Cubic Feet Per Minute: 33.9; Overall Height:
• Deadbolts; Type: Double Cylinder; Door Thickness Range: 1-3/4-2; Lock Type: Double Cylinder; Finish/Coating: Satin Chrome-Plated; Satin Chrome; Hand Orientation: Non-Handed; Lock Override: Key; Cylinder: 6 or 7 Pin; Additional Information: Core Not Includ
• Polytetrafluroethylene Film Tape: 3/4″ Wide, 36 yd Long, 3.7 mil Thick 27 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Electromagnet Lock Accessories; Type: Pushplate Actuator Kit; For Use With: Wireless Activation Doors; Material: Stainless Steel; Material: Stainless Steel; For Use With: Wireless Activation Doors; Type: Pushplate Actuator Kit; Accessory Type: Pushplate A
• Woodruff Keyseat Cutter: 0.5″ Cut Dia, 0.187″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3″ OAL, 8 Teeth, Solid Carbide
• Spiral Flute Tap: 9/16-18, UNF, 5 Flute, Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H4, Series CU51C410
• Guhring Steel and Cast Iron Roughing End Mill 6.00mm Diameter 6.0mm Shank 18.00mm Length of Cut 65mm Overall
• Corner Radius End Mill: 5/8″ Dia, 1-5/8″ LOC, 0.04″ Radius, 2 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill Head: 6 Flutes E20, Solid Carbide
• Roughing End Mill
• Ball End Mill Heads; Mill Diameter (Inch): 5/8; Mill Diameter (Decimal Inch): 0.6250; Number of Flutes: 6; Length of Cut (Inch): 5/8; Connection Type: E16; Overall Length (Decimal Inch): 2.0120; Material: Solid Carbide; Finish/Coating: HXT; Cutting Direct
• Ball End Mill Heads; Mill Diameter (mm): 16.00; Mill Diameter (Decimal Inch): 0.6299; Number of Flutes: 6; Length of Cut (mm): 16.0000; Connection Type: E16; Overall Length (mm): 51.1000; Material: Solid Carbide; Finish/Coating: HXT; Cutting Direction: Ri
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.06″ Radius, 2 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.09″ Radius, 2 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End
• Corner Radius End Mill: 3/4″ Dia, 15/16″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 3/4″ Dia, 15/16″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End
• Pipe Thread Plug Gage: Tapered, 1-11-1/2, Single End
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M18x1.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 3; Additio
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M18x2.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 3; Additio
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M18x1.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 3; Additional
• Pipe Thread Plug Gage: Tapered, 1-11-1/2, Single End
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M18x2.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 3; Additional
• Spiral Point Tap: 1-8, UNC, 3 Flutes, Plug, HSSE Finish 1-1/2″ Thread Length, 6.29″ OAL, Right Hand, H4, Series 306
• Spiral Point Tap: 1-12, UNF, 3 Flutes, Plug, HSSE Finish 1-1/2″ Thread Length, 5.51″ OAL, Right Hand, H4, Series 306
• Spiral Point Tap: 1-12, UNF, 3 Flutes, Plug, HSSE Finish 1-1/2″ Thread Length, 5.51″ OAL, Right Hand, H6, Series 306
• Spiral Point Tap: 1-8, UNC, 3 Flutes, Plug, HSSE Finish 1-1/2″ Thread Length, 6.29″ OAL, Right Hand, H6, Series 306
• Filters
• Jobber Length Drill Bit: 0.3906″ Dia, 140 °, Solid Carbide nano-A Finish, 4.0551″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 8511
• Ball End Mill: 0.9843″ Dia, 1.4961″ LOC, 4 Flute, Solid Carbide 100 mm OAL, 25 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide TiAlSiN Finish, Spiral Flute, Series DC175-03-A1
• Corner Radius End Mill: 0.314″ Dia, 0.767″ LOC, 0.022″ Radius, 3 Flutes Helix, Bright/Uncoated, Corner Radius End, Series Solid Mill
• Clear Double-Sided Polyethylene Foam Tape: 12″ Wide, 5 yd Long, 5 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.045″ Radius, 2 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 121
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 121
• Jobber Length Drill Bit: 0.3858″ Dia, 140 °, Solid Carbide TiN Finish, 4.06″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Box End Striking Wrench: 2-5/16″, 12 Point, Single End Alloy Steel, Black Finish
• Ball End Mill: 0.5″ Dia, 1.5″ LOC, 4 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 30 ° Helix, CVD Diamond Coated, Single End
• Ball End Mill: 0.5″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 283
• Slitting & Slotting Saw: 4″ Dia, 3/32″ Thick, 1″ Arbor Hole, 36 Teeth, Solid Carbide Bright/Uncoated
• Corner Radius End Mill: 5/8″ Dia, 1″ LOC, 3 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, 30 ° Helix, DLC Coated, Centercutting End, Series 2873
• Corner Radius End Mill: 5/8″ Dia, 2-1/4″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPV
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 11/64-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 11/64-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 11/64-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 11/64-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: High
• Pipe Thread Plug Gage: Tapered, 1/2-14, Single End
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 4'' OAL, 5 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1193; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Grooving Insert: GX24EM-1 WBS10, Solid Carbide CBN Finish, Neutral, 0.157″ Cutting Width, Series GX24_EM-1_R
• Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.1789; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
• Direct-Operated Solenoid Valves; Input Current: 24 VDC; Pressure: 23 - 145; CV Rating: 1.37; Inlet Size: 1/4
• Plug Thread Gage: M3.5x0.60 Thread, 6H Class, Double End, Go & No Go Handle Included
• Ball End Mill: 0.5″ Dia, 3 Flute, Solid Carbide 5″ OAL, 1/2″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Ball End Mill: 0.5″ Dia, 3 Flute, Solid Carbide 5″ OAL, 1/2″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 3 Flutes Helix
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 2; End Mill Material: Solid Carbide; Overall Length: 0.94
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.1181″ Dia, 0.315″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill Power Series; Number Of Flutes: 4; Overall Length: 1.57
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.1575″ Dia, 0.4331″ LOC, 4 Flute, 0.0031″ Chamfer Width, Solid Carbide 2.28 mm OAL, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.315″ Dia, 0.9449″ LOC, 5 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.76 mm OAL, AlTiN Coated
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 0.94
• Corner Radius End Mill: 0.2362″ Dia, 0.5118″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.375″ Cut Width, 1/2″ Shank Dia, Straight Tooth 3-3/8″ OAL, 10 Teeth, Brazed Solid Carbide, AlTiN Finish
• Screw Machine Length Drill Bit: 0.404″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Guhring Roughing End Mill for Tough Materials 20.00mm Diameter 20.0mm Shank 38.00mm Length of Cut 104mm Overall
• Knob Locksets; Type: Storeroom; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Stainless Steel; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.375; Lockset Grade: Grade 2
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 0.94
• Corner Chamfer End Mill: 0.375″ Dia, 0.469″ LOC, 4 Flute, 0.0075″ Chamfer Width, Solid Carbide 2″ OAL, 3/8″ Shank Dia, AlTiN Coated, Centercutting
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 3; End Mill Material: Solid Carbide; Overall Length: 0.94
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Jobber Length Drill Bit: 140 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Pipe Thread Plug Gage: Tapered, 1-11-1/2
• Chucking Reamer: 0.393″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Polyester Film Tape: 2″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Polyester Film Tape: 2″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, CVD Coated, Corner Radius End
• Ball End Mill: 0.1562″ Dia, 0.235″ LOC, 4 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, CVD Coated, Single End
• Electromagnet Locks; Average Magnetic Pull (Lb.): 600.000; 600.0 lb; Depth (Inch): 1 in; Timer: No; LED: No; Finish: Aluminum; Finish/Coating: Aluminum; Overall Depth: 1 in; Led Included: No; Average Magnetic Pull: 600.0 lb
• Class ZZ Plug Gage Set: 0.0197 to 0.0394″ Range, 51 Pc 0.002000″ Tolerance
• Corner Radius End Mill: 5/8″ Dia, 1-5/8″ LOC, 0.062″ Radius, 5 Flutes, Solid Carbide 3-1/2″ OAL, 5/8″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Side Chip Saw: 6″ Blade Dia, 0.2344″ Blade Thickness, 1-1/4″ Arbor Hole Dia, 42 Teeth, High Speed Steel Uncoated, Straight Tooth
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 5.5; Width (Inch): 0.3; Color: Natural
• Jobber Length Drill Bit: 0.4134″ Dia, 140 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series 4105 ECODRILL
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 5.5; Width (Inch): 0.3; Color: Black
• Side Chip Saw: 6″ Blade Dia, 0.2813″ Blade Thickness, 1-1/4″ Arbor Hole Dia, 42 Teeth, High Speed Steel Uncoated, Straight Tooth
• Jobber Length Drill Bit: 0.4724″ Dia, 140 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series 4105 ECODRILL
• Gravity Conveyors; Roller Style: Roller; Shape: Round; Roller Diameter (Decimal Inch): 0.75 in; 0.75 mm; Length (Feet): 76; Wheel Material: Aluminum; Load Capacity (Lb.): 50.000; Frame Material: Galvanized Steel; Gauge: 14 ga; 14 gauge; Centerline Distanc
• Jobber Length Drill Bit: 0.4528″ Dia, 140 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series 4105 ECODRILL
• 3/4″ Diam 6-Flute 35/38° Solid Carbide 0.012″ Corner Chamfer Roughing & Finishing End Mill AlCr Finish, 1-1/2″ LOC, 4″ OAL, 3/4″ Shank Diam, Centercutting, Standard Length
• Ball End Mill: 0.6299″ Dia, 0.9449″ LOC, 3 Flute, Solid Carbide 105 mm OAL, 16 mm Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4730
• Tapered End Mill: 20 ° per Side, 4 Flutes, Solid Carbide, Tapered End 8″ Shank Dia, SIRON-A Finish, Series JH744
• Tapered End Mill: 20 ° per Side, 4 Flutes, Solid Carbide, Tapered End 8″ Shank Dia, SIRON-A Finish, Series JH734
• Roughing End Mills; Mill Diameter (mm): 10.00; Mill Diameter (Decimal Inch): 0.3940; Number of Flutes: 4; Pitch: Close; Length of Cut (mm): 26.0000; Shank Diameter (mm): 10.0000; Material: Solid Carbide; Finish/Coating: TiAlSiN; Overall Length (mm): 72.00
• Electronic Caliper: 0 to 6″, 0.0005″ Resolution, IP40 0.0010″ Accuracy, Data Output
• Electronic Caliper: 0 to 6″, 0.0005″ Resolution, IP40 0.0010″ Accuracy, Data Output
• Spiral Flute Tap: M20 x 2.50, Metric, 4 Flute, Bottoming, 6HX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D9 & D10, Series 4630
• Woodruff Keyseat Cutter: 0.625″ Cut Dia, 0.156″ Cut Width, 5/8″ Shank Dia, Straight Tooth 3-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Finish
• Ball End Mill: 0.375″ Dia, 0.563″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 4; Length (yd): 5.00; Thickness (mil): 10.0000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 500.000; Color: Clear; Liner Material: Kraft Paper; Series: F9
• O-Ring: 1.4″ ID x 1.693″ OD, 0.103″ Thick, Dash 128, Kalrez 4079 Round Cross Section
• Spiral Flute Tap: M30 x 3.50, Metric, 4 Flute, Semi-Bottoming, 6GX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D14 & D15, Series 4625
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide TiAlSiN Finish, Spiral Flute, Series DC175-03-A1
• Electromagnet Lock Accessories; Type: Armor Door Cord; For Use With: Electrified Locks; Electric Exit Devices; Material: Satin Stainless Steel; Material: Satin Stainless Steel; For Use With: Electrified Locks; Electric Exit Devices; Type: Armor Door Cord;
• Screw Machine Length Drill Bit: 0.25″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.257″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.2657″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• O-Ring: 0.796″ ID x 1.074″ OD, 0.139″ Thick, Dash 211, Kalrez 7075 Round Cross Section
• Screw Machine Length Drill Bit: 0.252″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.4724″ Dia, 4 Flutes, Solid Carbide Variable ° Helix, Duarise Coated, Corner Radius End
• Corner Radius End Mill: 0.4724″ Dia, 4 Flutes, Solid Carbide Variable ° Helix, Duarise Coated, Corner Radius End
• Screw Machine Length Drill Bit: 0.248″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.2402″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Screw Machine Length Drill Bit: 0.2441″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Polytetrafluroethylene Film Tape: 2″ Wide, 36 yd Long, 2 mil Thick 20 Lb/In Tensile Strength, Acrylic Adhesive, 500 ° F
• Screw Machine Length Drill Bit: 0.2559″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.2638″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.2717″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.2598″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Knob Locksets; Type: Entrance; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Stainless Steel; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.375; Lockset Grade: Grade 2
• Screw Machine Length Drill Bit: 0.2677″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Power Protection Products, GFCI Linecords, Commercial, Manual Set, 15A 120V AC, 5-15R, 15' Cord Length, 4-6 mA Trip Level, Black and Yellow
• Screw Machine Length Drill Bit: 0.2756″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.2677″ Dia, 135 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 142P
• Square End Mill: 5/8'' Dia, 1-7/8'' LOC, 5/8'' Shank Dia, 5'' OAL, 5 Flutes, Solid Carbide Single End, Duarise Finish, 0 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Screw Machine Length Drill Bit: 0.25″ Dia, 135 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 142P
• Woodruff Keyseat Cutter: 0.625″ Cut Dia, 0.125″ Cut Width, 5/8″ Shank Dia, Straight Tooth 3-1/2″ OAL, 8 Teeth, Solid Carbide
• Woodruff Keyseat Cutter: 0.625″ Cut Dia, 0.187″ Cut Width, 5/8″ Shank Dia, Straight Tooth 3-1/2″ OAL, 8 Teeth, Solid Carbide
• Corner Radius End Mill: 5/8″ Dia, 3/4″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 5/8″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SM6F-NB
• Square End Mill: 5/8'' Dia, 1-1/4'' LOC, 5/8'' Shank Dia, 3-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN+ Finish, Spiral Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series 6/44
• Side Chip Saw: 3″ Blade Dia, 5/32″ Blade Thickness, 1″ Arbor Hole Dia, 28 Teeth, Cobalt Uncoated, Staggered Tooth
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.062″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.078″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.1875″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide, AlTiN Finish
• Duct Tape: 1-3/8″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.25″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.125″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 0.75″ Cut Dia, 0.093″ Cut Width, 3/8″ Shank Dia, Staggered Tooth 3″ OAL, 10 Teeth, Solid Carbide, AlTiN Finish
• Turning Insert: S-CNGN432 BXC90, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGN
• Turning Insert: S-CNGN433 BXC90, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGN
• Spiral Flute Tap: M28 x 1.50, MF, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D6, Series C0451000
• Knob Locksets; Type: Passage; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Stainless Steel; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.75; Lockset Grade: Grade 2