Products

• Ring Pipe Thread Gages; Thread Size: 1-1/2-11; Classification: System A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: BSPP; Additional Information: Set: 2 Pc.; Go ™No ™Go: Go/No Go; Thread Size (Inch): 1-1/2
• Plastic Hardwired Timed Bypass Exit Alarm & Rechargeable Battery For use with Interior & Exterior Doors
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Single or Multiple Components Within an Access Control System; Material: Steel; Material: Steel; For Use With: Single or Multiple Components Within an Access Control System; Type: Power Sup
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Single or Multiple Components Within an Access Control System; Material: Steel; Material: Steel; For Use With: Single or Multiple Components Within an Access Control System; Type: Power Sup
• Ring Pipe Thread Gages; Thread Size: 3/8-18; Classification: L2; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: ANPT; Additional Information: Specification Met: SAE AS71051; Thread Size (Inch): 3/8-18
• Polytetrafluroethylene Film Tape: 1/2″ Wide, 36 yd Long, 6.7 mil Thick 40 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Square End Mill: 41mm LOC, 20mm Shank Dia, 126mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6480
• 12" Dia, 24 Grit, Ceramic Blend
• Square End Mill: 1'' Dia, 3'' LOC, 1'' Shank Dia, 7'' OAL, 5 Flutes, Solid Carbide Single End, Duarise Finish, 0 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Straight; Flute Type: Helical
• Spiral Flute Tap: 7/8-9, DIN & ANSI, 4 Flute, Semi-Bottoming, 2BX Class of Fit, High Speed Steel-E-PM, TiAlN Finish Right Hand Flute, Right Hand Thread, Series T300
• Jobber Length Drill Bit: 0.6563″ Dia, 140 °, Solid Carbide TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Square End Mill: 1'' Dia, 2'' LOC, 1'' Shank Dia, 4-1/2'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Corner Radius End Mill: 1″ Dia, 2″ LOC, 0.03″ Radius, 4 Flutes 4″ OAL, 1″ Shank Dia, 50 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SR4F
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Laser & Ultrasonic Distance Finders; Minimum Distance: 33; Maximum Distance (Meters): 262; Maximum Distance (Feet): 262; Maximum Distance: 262; Distance Meter Functions: 4-Point Crossbeam; Align; Plumb; Level; Square; Accuracy: +/-1/8 ™; Minimum Distance
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 1.500; Number of Walls: 0
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 1.500; Number of Walls: 0
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 1.500; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Ball End Mill: 1″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 1″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Electromagnet Lock Accessories; Type: Proximity Card Reader; For Use With: Access Control Panel; PXL-500P Controllers; Material: Plastic; Material: Plastic; For Use With: Access Control Panel; PXL-500P Controllers; Type: Proximity Card Reader; Accessory T
• Guhring Optimized Roughing End Mill for Aluminum 25.00mm Diameter 25.0mm Shank 38.00mm Length of Cut 121mm Overall
• Electromagnet Lock Accessories; Type: Touchless Switch; For Use With: Interior; Exterior Doors; Material: Stainless Steel; Material: Stainless Steel; For Use With: Interior; Exterior Doors; Type: Touchless Switch; Accessory Type: Touchless Switch; Type: T
• Electromagnet Lock Accessories; Type: Touchless Switch; For Use With: Interior; Exterior Doors; Material: Stainless Steel; Material: Stainless Steel; For Use With: Interior; Exterior Doors; Type: Touchless Switch; Accessory Type: Touchless Switch; Type: T
• Jobber Length Drill Bit: 0.625″ Dia, 85 °, Micron Grain Carbide Diamond Finish, 5.24″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series UDR5P1AA
• Corner Radius End Mill Head: 3 Flutes Polycrystalline Diamond
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Adjustable Stop Countersink Cage
• Utility Cart: 38″ OAH, Steel, Silver
• Clocks & Multi-Function Clocks; Type: Analog; Color: White; Black; Type: Analog; Additional Information: Includes: 13″ PoE IP Network 12 Hour Analog Wall Clock, Security Wall Bracket, Security Wall Bracket Key & User Guide; Dims: 13-1/4 x 2″; Non-glare, S
• Power Pallet Truck: 5,500 lb Capacity, 27″ OAW, 27″ Forks 3″ Min Lift Height, 36″ Fork Length x 27″ Fork Width, 27″ Overall Width
• Electromagnet Lock Accessories; Type: Touchless Switch; For Use With: Interior; Exterior Doors; Material: Stainless Steel; Material: Stainless Steel; For Use With: Interior; Exterior Doors; Type: Touchless Switch; Accessory Type: Touchless Switch; Type: T
• Electromagnet Lock Accessories; Type: Touchless Switch; For Use With: Interior; Exterior Doors; Material: Stainless Steel; Material: Stainless Steel; For Use With: Interior; Exterior Doors; Type: Touchless Switch; Accessory Type: Touchless Switch; Type: T
• Glass Cloth Tape; Width (Inch): 4; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 5.0000; Tensile Strength (Lb./Inch): 120.00; Maximum Operating Temperature (F): 500.000
• Full Barrel Manual Caulk & Adhesive Applicator: 29 oz Black & Gray, Use with Triggerfoam Cartridges
• Jobber Length Drill Bit: 0.5313″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-20; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material: High Spee
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-20; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material: High S
• Jobber Length Drill Bit: 0.625″ Dia, 140 °, Solid Carbide TiN, AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-20; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material: High Spee
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-20; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material: High S
• 11" Dia, 120 Grit, Ceramic Blend
• Power Pallet Truck: 5,500 lb Capacity, 21″ OAW, 21″ Forks 3″ Min Lift Height, 42″ Fork Length x 21″ Fork Width, 21″ Overall Width
• Corner Radius End Mill Head: 7 Flutes Solid Carbide, Super-A Coated, Series 6864
• Jobber Length Drill Bit: 0.5709″ Dia, 140 °, Solid Carbide AlCrN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.5945″ Dia, 140 °, Solid Carbide AlCrN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Door Closer Accessories; For Use With: SEM7810 Series Door Closers; Finish/Coating: Sprayed Aluminum; For Use With: SEM7810 Series Door Closers
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Jobber Length Drill Bit: 85 °, Micron Grain Carbide Diamond Finish, 133″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series UDR5P2AA
• Pipe Thread Plug Gage: 1/2-14, Double End
• Corner Radius End Mill: 3/4″ Dia, 1.142″ LOC, 3 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 30 ° Helix, DLC Coated, Series 2874
• Ring Pipe Thread Gages; Thread Size: 1/8-28; Classification: System A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: BSPP; Additional Information: Go ™No ™Go: No Go; Thread Size (Inch): 1/8-28
• Power Pallet Truck: 5,500 lb Capacity, 21″ OAW, 21″ Forks 3″ Min Lift Height, 48″ Fork Length x 21″ Fork Width, 21″ Overall Width
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M27x2.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Additional
• Spiral Flute Tap: M40 x 2.00, MF, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D7, Series C0451000
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Electromagnet Lock Accessories; Type: Battery Eliminator; For Use With: ECL-600 Battery Powered Series Exit Control Locks; ECL-230X Series; Detex ECL-230D; Material: Steel; Material: Steel; For Use With: ECL-600 Battery Powered Series Exit Control Locks;
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 5/8-18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: Hi
• Square End Mill: 6mm Shank Dia, 115mm OAL, 6 Flutes, Solid Carbide Single End, 50 ° Helix, RH Cut, RH Flute
• Electromagnet Lock Accessories; Type: Hardwired Door Prop Alarm; For Use With: Emergency Exit & Restricted Doors; All Access Control Systems; Material: Plastic; Material: Plastic; For Use With: Emergency Exit & Restricted Doors; All Access Control Systems
• Ring Pipe Thread Gages; Thread Size: 1/8-28; Classification: System A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: BSPP; Additional Information: Go ™No ™Go: Go; Thread Size (Inch): 1/8-28
• Square End Mill: 16mm Shank Dia, 115mm OAL, 6 Flutes, Solid Carbide Single End, 50 ° Helix, Centercutting, RH Cut, RH Flute
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M27x3.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Additional
• Jobber Length Drill Bit: 0.6299″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-3/8-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material: Hig
• Jobber Length Drill Bit: 0.622″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.6181″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-3/8-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material: High S
• Jobber Length Drill Bit: 0.6142″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M27x2.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Additio
• Jobber Length Drill Bit: 0.6024″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.5315″ Dia, 140 °, Solid Carbide AdvaTech Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series 4005 ECODRILL
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-3/8-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Material: Hi
• Jobber Length Drill Bit: 0.5984″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.5945″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 5/8-18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: Hi
• Jobber Length Drill Bit: 0.5906″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-3/8-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Material: High
• Jobber Length Drill Bit: 0.5807″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.5625″ Dia, 140 °, Solid Carbide Bright/Uncoated, 4.9016″ OAL, Right Hand Cut, Straight Flute, Straight-Cylindrical Shank
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M27x3.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Additio
• Jobber Length Drill Bit: 0.5787″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.5748″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.5709″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.563″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Guhring Optimized Roughing End Mill for Aluminum 20.00mm Diameter 20.0mm Shank 38.00mm Length of Cut 104mm Overall
• Jobber Length Drill Bit: 0.5591″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.5551″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Electromagnet Lock Accessories; Type: Inrush Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Inrush Power Supply; Accessory Type: Inrush Power Supply; Type: Inrush Power
• Jobber Length Drill Bit: 0.5669″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.626″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.6102″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Jobber Length Drill Bit: 0.5827″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Corner Radius End Mill Head: 1″ Dia, 2″ LOC, 5 Flutes Solid Carbide, nano-A Coated, Series 6990
• Ball End Mill: 0.75″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End, Series SAPB-NB
• Ball End Mill: 0.75″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 35 ° Helix, AlCrN Coated, Single End, Series SAPB
• Electromagnet Lock Accessories; Type: Proximity Card Reader; For Use With: Access Control Panel; Material: Polycarbonate; Material: Polycarbonate; For Use With: Access Control Panel; Type: Proximity Card Reader; Accessory Type: Proximity Card Reader; Type
• Corner Radius End Mill: 3/4″ Dia, 2-1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 40 ° Helix, Altima Q Coated, Corner Radius End
• UHMW Film Tape: 6″ Wide, 5 yd Long, 15.2 mil Thick 55 Lb/In Tensile Strength, Rubber Adhesive, 225 ° F
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Burglar Alarm System; Material: Steel; Material: Steel; For Use With: Burglar Alarm System; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Jobber Length Drill Bit: 0.6693″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Electromagnet Lock Accessories; Type: Software & Cable Kit; For Use With: Alarm Lock PC to Digital Lock Interface; Material: Plastic; Material: Plastic; For Use With: Alarm Lock PC to Digital Lock Interface; Type: Software & Cable Kit; Accessory Type: Sof
• Multi-Polymer Film Tape: 12″ Wide, 100 yd Long, 2.8 mil Thick 4,500 Lb/In Tensile Strength, Acrylic Adhesive
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Duct Tape: 12″ Wide, 12.1 mil Thick, Polyethylene Rubber Adhesive, 36 lb/in Tensile Strength
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• 1/8″ x 5/8″ 4FL EXOCARB DG-EML long neck corner radius carbide end mill engineered to achieve high-efficiency and high precision milling in high-hardness steels.
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 1″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Ball End Mill: 1″ Dia, 4 Flute, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Straight Flutes Tap: 7/8-9, UNC, 5 Flutes, Modified Bottoming, 2BX, Powdered Metal High Speed Steel, TiAlN Finish 1.339″ Thread Length, 5.512″ OAL, Right Hand, Series MTS
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• UHMW Film Tape: 6″ Wide, 5 yd Long, 10.2 mil Thick 30 Lb/In Tensile Strength, Rubber Adhesive, 225 ° F
• Ball End Mill: 1″ Dia, 1″ LOC, 4 Flute, Solid Carbide 3″ OAL, 1″ Shank Dia, 35 & 38 ° Helix, AlCr Coated, Single End, Series 2919L
• Snap Gages; Minimum Measurement (mm): 115.90; Maximum Measurement (Inch): 4-15/16; Maximum Measurement (mm): 125.4; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 4-15/16; Minimum Measurement (Inch): 4-9/16; Minimum Measurement (Decimal
• Snap Gages; Minimum Measurement (mm): 106.40; Maximum Measurement (Inch): 4-9/16; Maximum Measurement (mm): 115.9; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 4-9/16; Minimum Measurement (Inch): 4-3/16; Minimum Measurement (Decimal I
• Pipe Wrench: 36″ OAL, Aluminum 6″ Max Pipe Capacity
• Spiral Flute Tap: #1-8, UNC, 4 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, TiAIN Finish 2.52″ Thread Length, 6.2992″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Spiral Flute Tap: #1-12, UNF, 4 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, TiAlN Finish 2.52″ Thread Length, 6.2992″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Electromagnet Lock Accessories; Type: Hardwired Pushplate; For Use With: Touchless Actuators; Material: Stainless Steel; Material: Stainless Steel; For Use With: Touchless Actuators; Type: Hardwired Pushplate; Accessory Type: Hardwired Pushplate; Type: Ha
• Electromagnet Lock Accessories; Type: Hardwired Pushplate; For Use With: Touchless Actuators; Material: Stainless Steel; Material: Stainless Steel; For Use With: Touchless Actuators; Type: Hardwired Pushplate; Accessory Type: Hardwired Pushplate; Type: Ha
• Screw Machine Length Drill Bit: 0.63″ Dia, 124 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 131N
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill Power Series; Number Of Flutes: 4; Overall Length: 1.26
• Impact Socket: 6-Point, 4-5/16″ OAL
• Spiral Point Tap: 1-12, UNF, 4 Flutes, Plug, VC-10 Finish 1-1/2″ Thread Length, 5.51″ OAL, Right Hand, H4, Series 316TI
• 3/32″ x 15/32″ 4FL EXOCARB DG-LN-EML long neck corner radius carbide end mill engineered to achieve high-efficiency and high precision milling in high-hardness steels.
• Spiral Point Tap: 1-12, UNF, 4 Flutes, Plug, VC-10 Finish 1-1/2″ Thread Length, 5.51″ OAL, Right Hand, H6, Series 316TI
• 1/16″ x 5/16″ 4FL EXOCARB DG-LN-EML long neck corner radius carbide end mill engineered to achieve high-efficiency and high precision milling in high-hardness steels.
• 3/64″ x 15/64″ 4FL EXOCARB DG-LN-EML long neck corner radius carbide end mill engineered to achieve high-efficiency and high precision milling in high-hardness steels.
• 1/32″ x 5/32″ 4FL EXOCARB DG-LN-EML long neck corner radius carbide end mill engineered to achieve high-efficiency and high precision milling in high-hardness steels.
• Ball End Mill: 0.625″ Dia, 4 Flute, Solid Carbide 5″ OAL, 5/8″ Shank Dia, 35 & 38 ° Helix, AlCr Coated, Single End, Series 3900L
• Spiral Point Tap: M24 x 1.5, Metric, 4 Flutes, Plug, VC-10 Finish 36 mm Thread Length, 140 mm OAL, Right Hand, D6, Series 347TI
• Modular Tool Holding System Adapter
• Modular Tool Holding System Adapter: ER32QF Taper 38.5 mm Projection, Through Coolant
• Positioning Indicators; Indicator Type: Dial Positioning; Accuracy: 0.01; Point Length (mm): 27.00; Point Diameter (mm): 4.00; Shank Type: Straight
• Positioning Indicators; Indicator Type: Dial Positioning; Accuracy: 0.01; Point Length (mm): 27.00; Point Diameter (mm): 4.00; Shank Type: Straight; Shank Size (mm): 16.00
• Spiral Flute Tap: #1-8, DIN & ANSI, 4 Flute, Semi-Bottoming, 3BX Class of Fit, High Speed Steel-E-PM, TiAlN Finish Right Hand Flute, Right Hand Thread, Series T300
• Corner Chamfer End Mill: 0.63″ Dia, 4 Flute, Solid Carbide 92 mm OAL, 16 mm Shank Dia, 48 ° Helix, TiAlN Coated, Centercutting
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 9/16-18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: H
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 9/16-18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 3; Material: H
• Electromagnet Lock Accessories; Type: Touchless Switch; For Use With: Interior; Exterior Doors; Material: Polycarbonate; Material: Polycarbonate; For Use With: Interior; Exterior Doors; Type: Touchless Switch; Accessory Type: Touchless Switch; Type: Touch
• Ball End Mill: 1/4" Dia, 1" LOC, 2 Flute, Solid Carbide
• Duct Tape: 48 mm Wide, 7 mil Thick, Polyethylene Cloth Rubber Adhesive, 38 lb/in Tensile Strength
• Tapered End Mill: 20 ° per Side, 4 Flutes, Solid Carbide, Tapered End SIRON-A Finish, Series JH744
• Tapered End Mill: 20 ° per Side, 4 Flutes, Solid Carbide, Tapered End SIRON-A Finish, Series JH744
• Tapered End Mill: 20 ° per Side, 4 Flutes, Solid Carbide, Tapered End SIRON-A Finish, Series JH744
• Tapered End Mill: 20 ° per Side, 4 Flutes, Solid Carbide, Tapered End SIRON-A Finish, Series JH744
• Square End Mill: 3/4'' Dia, 3'' LOC, 3/4'' Shank Dia, 6'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN+ Finish, Spiral Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series 6/44
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M30x2.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Teeth per
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M30x2.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Teeth p
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M30x3.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Teeth p
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M30x3.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Teeth per
• Pipe Thread Plug Gage: Tapered, 2-11-1/2
• Pipe Thread Plug Gage: Tapered, 2-11-1/2
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Jobber Length Drill Bit: 0.5469″ Dia, 140 °, Solid Carbide AlTiN Finish, 4.8819″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B211
• Jobber Length Drill Bit: 0.5156″ Dia, 140 °, Solid Carbide AlTiN Finish, 4.8819″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B211
• Jobber Length Drill Bit: 0.4844″ Dia, 140 °, Solid Carbide AlTiN Finish, 4.8819″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B211
• Glass Cloth Tape; Width (Inch): 6; Material Type: Fiberglass; PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 11.7000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• Electromagnet Lock Accessories; Type: Stand Alone Door Alarm; For Use With: Emergency Exit & Restricted Doors; All Access Control Systems; Material: Aluminum; Material: Aluminum; For Use With: Emergency Exit & Restricted Doors; All Access Control Systems;
• Electronic Label Makers; Type: Printer Workstation; Power Source: Rechargeable Battery; AC Adapter; Resolution: 320 x 240 pixels; Includes: R4300 Series Printer Ribbon (M61-R4310); AC Adapter/Battery Charger (M-AC-143110); BradyPrinter M611 Mobile Printer
• Woodruff Keyseat Cutter: 1″ Cut Dia, 0.1875″ Cut Width, 1/2″ Shank Dia, Staggered Tooth 3-1/2″ OAL, 12 Teeth, Solid Carbide, AlTiN Finish
• Pipe Thread Plug Gage: Tapered, 3-8, Double End
• Edge & Center Finder Accessories; Type: MasterBar; Includes: 1 MasterBar; For Use With: HSK-A 63 Spindles; Accessory Type: MasterBar
• Electromagnet Locks; Average Magnetic Pull (Lb.): 1200.000; 1200.0 lb; Length (Inch): 22 in; Timer: No; LED: No; Finish: Aluminum; Finish/Coating: Aluminum; Overall Length: 22 in; Led Included: No; Average Magnetic Pull: 1200.0 lb
• Woodruff Keyseat Cutter: 1″ Cut Dia, 0.125″ Cut Width, 1/2″ Shank Dia, Staggered Tooth 3-1/2″ OAL, 12 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 1″ Cut Dia, 0.093″ Cut Width, 1/2″ Shank Dia, Staggered Tooth 3-1/2″ OAL, 12 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 1″ Cut Dia, 0.25″ Cut Width, 1/2″ Shank Dia, Staggered Tooth 3-1/2″ OAL, 12 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 1″ Cut Dia, 0.078″ Cut Width, 1/2″ Shank Dia, Staggered Tooth 3-1/2″ OAL, 12 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 1″ Cut Dia, 0.062″ Cut Width, 1/2″ Shank Dia, Staggered Tooth 3-1/2″ OAL, 12 Teeth, Solid Carbide, AlTiN Finish
• Spiral Flute Tap: BSP, 4 Flute, Semi-Bottoming, X Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, Series 4632
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SM5F-NB
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Corner Radius End Mill: 0.6299″ Dia, 0.031″ Radius, 6 Flutes, Solid Carbide 35 ° Helix, Corner Radius End, Series MD133
• Corner Radius End Mill: 0.6299″ Dia, 0.031″ Radius, 6 Flutes, Solid Carbide 35 ° Helix, Corner Radius End, Series MD133
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill Power Series; Number Of Flutes: 4; Overall Length: 1.26
• Corner Radius End Mill: 0.2362″ Dia, 0.5118″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill Power Series; Number Of Flutes: 4; Overall Length: 1.57
• Jobber Length Drill Bit: 0.5938″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 5.24″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.6102″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 5.2362″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.6024″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 5.2362″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.6181″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 5.2362″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Jobber Length Drill Bit: 0.6299″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 5.2362″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 1/4″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.12″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.19″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Ball End Mill: 1″ Dia, 2.25″ LOC, 3 Flute, Solid Carbide 5″ OAL, 1″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Jobber Length Drill Bit: 0.4055″ Dia, 140 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Polyimide Film Tape: 6″ Wide, 50' x 5 mil Thick Non-Adhesive, -40 to 450 ° F
• Polyimide Film Tape: 3″ Wide, 100' x 1 mil Thick Non-Adhesive, -40 to 450 ° F
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/2 - 18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Teeth pe
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/2 - 18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Teeth
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/2 - 18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Teeth pe
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/2 - 18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Teeth
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Ball End Mill: 0.75″ Dia, 1.125″ LOC, 2 Flute, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 35 ° Helix, Uncoated, Single End
• Guhring Roughing End Mill for Aluminum 16.00mm Diameter 16.0mm Shank 32.00mm Length of Cut 108mm Overall with Coolant Thru
• FEP Film Tape: 2″ Wide, 36 yd Long, 3.5 mil Thick 8 Lb/In Tensile Strength, Silicone Adhesive, -100 to 400 ° F
• Spiral Flute Tap: M20 x 2.50, DIN, 4 Flute, Modified Bottoming, 6H Class of Fit, Hardlube Finish 2.48″ Thread Length, 5.5118″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Side Chip Saw: 6″ Blade Dia, 0.2344″ Blade Thickness, 1″ Arbor Hole Dia, 42 Teeth, High Speed Steel TiN Finish, Straight Tooth
• UHMW Film Tape: 6″ Wide, 36 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Door Closer Accessories; For Use With: LCN 8310 Power Operator Actuators; Finish/Coating: Black; For Use With: LCN 8310 Power Operator Actuators
• Spiral Flute Tap: 11/8-7, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, TiN Finish 7.0866″ OAL, Right Hand Flute, Right Hand Thread, H8
• Corner Radius End Mill Head: 1″ Dia, 1-1/2″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Hot Melt Glue Sticks; Diameter (Inch): 1/2; Length (Inch): 10; Color: Clear
• Electromagnet Lock Accessories; Type: Proximity Card Reader; For Use With: Access Control Panel; PXL-500P Controllers; Material: Plastic; Material: Plastic; For Use With: Access Control Panel; PXL-500P Controllers; Type: Proximity Card Reader; Accessory T
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Pipe Thread Plug Gage: Straight, 1-11-1/2, Double End Handle Size 5
• Pipe Thread Plug Gage: Straight, 3/4-14, Double End
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-7/16 - 18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Material: Hi