Products

• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9333; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Trim; Type: Blank Escutcheon; Trim Type: Blank Escutcheon; Material: Steel; Finish/Coating: Satin Chrome; Hand: Non-Handed; Minimum Order Quantity: Steel; Material: Steel; Cylinder Type: Keyless; Finish: Satin Chrome; Material: Steel
• Glass Cloth Tape; Width (Inch): 1; Material Type: PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 5.6000; Tensile Strength (Lb./Inch): 100.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Torque Wrenches; Wrench Type: Preset Open End Wrench; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 40.00; Maximum Torque (Ft/Lb): 220.00; Overall Length (Decimal Inch): 24.0000; Head Type: Interchageable
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-5/16-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Addi
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 11/64-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material:
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 11/64-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material:
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-5/16-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Addi
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Screw Machine Length Drill Bit: 147 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 860
• Spiral Flute Tap: M36 x 2.00, MF, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D7, Series C0451000
• Gate Latches
• Electronic Inside Micrometer: 1.2 to 1.6″ Range 0.00005″ Resolution, 0.00015″ Accuracy, Micro USB Output
• Electronic Inside Micrometer: 1.6 to 2″ Range, IP54 0.00005″ Resolution, 0.00020″ Accuracy, Micro USB Output
• Square End Mill: 3/4'' Dia, 2-1/2'' LOC, 3/4'' Shank Dia, 5-1/2'' OAL, 5 Flutes, Solid Carbide Single End, Duarise Finish, 0 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Clear Double-Sided Acrylic Tape: 12″ Wide, 5 yd Long, 40 mil Thick, Acrylic Adhesive
• Ball End Mill: 0.0469″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, DG Diamond Coated, Series 7430
• Ball End Mill: 0.0938″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, DG Diamond Coated, Series 7430
• Ball End Mill: 0.0625″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, DG Diamond Coated, Series 7430
• Ball End Mill: 0.0313″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, DG Diamond Coated, Series 7430
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 1.57
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 3.000; Number of Walls: 0
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/4-7; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 5; Material: High Sp
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/4-7; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 5; Material: High
• Temporary Structures; Type: Platform; Width (Feet): 3.00; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Pipe Thread Plug Gage: Tapered, 1-1/2-11-1/2, Single End
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/4-7; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 5; Material: High Sp
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/4-7; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 5; Material: High
• Corner Radius End Mill: 3/4″ Dia, 2-1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 40 ° Helix, Altima Q Coated, Corner Radius End
• Electromagnet Lock Accessories; Type: Touchplate; For Use With: Remote Module& Transmitter; Material: Brass; Material: Brass; For Use With: Remote Module& Transmitter; Type: Touchplate; Accessory Type: Touchplate; Type: Touchplate
• Die-Cut Label for Printer: 2″, Self-Laminating Vinyl, Clear & White Use with IP Series Printer, BradyPrinter i5100 Industrial Label Printer, BradyPrinter i7100 Industrial Label Printer & THT 3″ Core Printers
• Corner Radius End Mill: 0.472″ Dia, 0.098″ Radius, 5 Flutes, Solid Carbide 42 ° Helix, TiAlSiN Coated, Corner Radius End, Series CoroMill Plura
• Screw Machine Length Drill Bit: 0.5039″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.5″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.4844″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.5118″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.6693″ Dia, 140 °, Solid Carbide WD1 Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5600
• Square End Mill: 1'' Dia, 2-1/4'' LOC, 1'' Shank Dia, 5'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 45 ° Helix, Centercutting, RH Cut, Series XP-NB
• Screw Machine Length Drill Bit: 0.4921″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Glass Cloth Tape; Width (Inch): 3; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 10.0000; Tensile Strength (Lb./Inch): 225.00; Maximum Operating Temperature (F): 500.000
• Airflow Meters & Thermo-Anemometers
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9599; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Guhring Universal Roughing End Mill 18.00mm Diameter 18.0mm Shank 32.00mm Length of Cut 92mm Overall
• Screw Machine Length Drill Bit: 0.689″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5510
• Corner Radius End Mill: 7/8″ Dia, 2″ LOC, 3 Flutes, Solid Carbide 4-1/2″ OAL, 7/8″ Shank Dia, 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2843
• Corner Radius End Mill: 7/8″ Dia, 2″ LOC, 3 Flutes, Solid Carbide 4-1/2″ OAL, 7/8″ Shank Dia, 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2843
• Corner Radius End Mill: 7/8″ Dia, 2″ LOC, 3 Flutes, Solid Carbide 4-1/2″ OAL, 7/8″ Shank Dia, 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2843
• Corner Radius End Mill: 7/8″ Dia, 2″ LOC, 3 Flutes, Solid Carbide 4-1/2″ OAL, 7/8″ Shank Dia, 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2843
• Corner Radius End Mill: 7/8″ Dia, 2″ LOC, 3 Flutes, Solid Carbide 4-1/2″ OAL, 7/8″ Shank Dia, 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2843
• Corner Radius End Mill: 7/8″ Dia, 2″ LOC, 3 Flutes, Solid Carbide 4-1/2″ OAL, 7/8″ Shank Dia, 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2843
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.12″ Radius, 6 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Screw Machine Length Drill Bit: 140 °, Solid Carbide Coated, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B210
• Impact Socket: 6-Point
• Electromagnet Lock Accessories; Type: Pneumatic Pushplate Switch; For Use With: Touchless Actuators; Material: Steel; Material: Steel; For Use With: Touchless Actuators; Type: Pneumatic Pushplate Switch; Accessory Type: Pneumatic Pushplate Switch; Type: P
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 5/8-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: H
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 5/8-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material: H
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 9/16-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: H
• Jobber Length Drill Bit: 0.5315″ Dia, 140 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series 4105 ECODRILL
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 9/16-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 3; Material: H
• Corner Radius End Mill Head: 5 Flutes Solid Carbide, Super-A Coated, Series 6858
• Square End Mill: 1'' Dia, 4'' LOC, 1'' Shank Dia, 7'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 7'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Jobber Length Drill Bit: 0.315″ Dia, 120 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Storage Cabinet: 36″ Wide, 18″ Deep, 78″ High 4 Shelf
• Ball End Mill: 1″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 1″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End, Series SAPB-NB
• Storage Cabinet: 36″ Wide, 24″ Deep, 72″ High 4 Shelf
• Polyimide Film Tape: 4″ Wide, 36 yd Long, 3 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 311 ° F
• Jobber Length Drill Bit: 85 °, Micron Grain Carbide Diamond Finish, 118″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series UDR5P2AA
• Turning Insert: VNMA332RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0748″ Long, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Storage Cabinet: 36″ Wide, 24″ Deep, 72″ High 4 Shelf
• Turning Insert: DNMA432RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0748″ Long, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series NPD10
• Turning Insert: DCMA32.52RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0669″ Long, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series NPD10
• Turning Insert: CCMW03X102RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0551″ Long, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series NPD10
• Turning Insert: CCMA32.52RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0669″ Long, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series NPD10
• Turning Insert: VCMA630RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0866″ Long, 0.0039″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Turning Insert: CCMA21.50.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0709″ Long, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series NPD10
• Turning Insert: CCMW03X104RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0551″ Long, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series NPD10
• Turning Insert: CCMW04X104RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0709″ Long, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series NPD10
• Turning Insert: CCMA21.51RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0709″ Long, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series NPD10
• Turning Insert: VCMA631RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0630″ Long, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Turning Insert: CCMW04X102RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0748″ Long, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series NPD10
• Turning Insert: TPMA332RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0748″ Long, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series NPD10
• Turning Insert: CCMA32.50.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0709″ Long, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series NPD10
• Turning Insert: DCMA21.50.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0866″ Long, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series NPD10
• Turning Insert: TPMA630.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0472″ Long, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series NPD10
• Turning Insert: DCMA32.51RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0787″ Long, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series NPD10
• Turning Insert: SNMA432RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0709″ Long, 0.0315″ Corner Radius, 90.0 &deg N/A Square, Series NPD10
• Turning Insert: DCMA32.50.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0866″ Long, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series NPD10
• Turning Insert: SNMA433RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0709″ Long, 0.0472″ Corner Radius, 90.0 &deg N/A Square, Series NPD10
• Corner Radius End Mill Head: 8 Flutes E25, Solid Carbide
• Turning Insert: DNMA433RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0748″ Long, 0.0472″ Corner Radius, 55.0 &deg N/A Diamond, Series NPD10
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9684; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: TPMA631RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0433″ Long, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series NPD10
• Turning Insert: TPMA330.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0906″ Long, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series NPD10
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9070; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: TPMA220.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0630″ Long, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series NPD10
• Turning Insert: TPMA331RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0866″ Long, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series NPD10
• Turning Insert: TPMA221RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0591″ Long, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series NPD10
• Turning Insert: TPMA222RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0472″ Long, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series NPD10
• Impact Socket: 6-Point, 5-11/16″ OAL
• Turning Insert: VCMA630.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0787″ Long, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Door Closer Accessories; For Use With: LCN 4040XP Series Door Closers; Finish/Coating: Sprayed Aluminum; For Use With: LCN 4040XP Series Door Closers
• Turning Insert: VCMA220.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0866″ Long, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Door Closer Accessories; For Use With: LCN 4030 Series Door Closers; Body Length: 11.25; Finish/Coating: Sprayed Aluminum; For Use With: LCN 4030 Series Door Closers
• Damping Stays; Type: Heavy-Duty Lift Assist Damper; Capacity: 309.000; Overall Length (mm): 251.0000; Thickness (mm): 130; Width (mm): 84.30; Side: Back Panel; Maximum Opening: 95.000; Finish/Coating: Nickel Plated; Nickel Chrome; Dark Brown; Mounting Hol
• Turning Insert: DCMA21.51RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0787″ Long, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series NPD10
• Turning Insert: VCMA333RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0551″ Long, 0.0472″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Turning Insert: VCMA331RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0709″ Long, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Polytetrafluroethylene Film Tape: 1″ Wide, 36 yd Long, 3.7 mil Thick 27 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Turning Insert: VCMA221RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0709″ Long, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Turning Insert: VCMA330.5RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0866″ Long, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Turning Insert: CCMA32.51RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0709″ Long, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series NPD10
• Pipe Thread Plug Gage: Straight, 1-11-1/2, Double End
• Turning Insert: VNMA333RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0669″ Long, 0.0472″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Turning Insert: VCMA332RH NPD10, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0748″ Long, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series NPD10
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: M3x0.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 00; Addi
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: CCTV Cameras; Material: Steel; Material: Steel; For Use With: CCTV Cameras; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• 1/2″ Port, 11.28″ High x 3.11″ Wide Filter 83 SCFM, 250 Max psi, 175°F Max Temp
• Electromagnet Lock Accessories; Type: Pneumatic Pushplate Switch; For Use With: Touchless Actuators; Material: Steel; Material: Steel; For Use With: Touchless Actuators; Type: Pneumatic Pushplate Switch; Accessory Type: Pneumatic Pushplate Switch; Type: P
• Side Chip Saw: 6″ Blade Dia, 1/4″ Blade Thickness, 1-1/4″ Arbor Hole Dia, 42 Teeth, Cobalt Uncoated, Straight Tooth
• Electromagnet Lock Accessories; Type: Pneumatic Pushplate Switch; For Use With: Touchless Actuators; Material: Steel; Material: Steel; For Use With: Touchless Actuators; Type: Pneumatic Pushplate Switch; Accessory Type: Pneumatic Pushplate Switch; Type: P
• Straight Flutes Tap: Metric, 5 Flutes, Modified Bottoming, 6HX, Powdered Metal High Speed Steel, TiAlN Finish Right Hand, Series MTS
• Electromagnet Lock Accessories; Type: Hand Held Transmitter; For Use With: Touchless Actuators; Material: Cast Iron; Material: Cast Iron; For Use With: Touchless Actuators; Type: Hand Held Transmitter; Accessory Type: Hand Held Transmitter; Type: Hand Hel
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 1.57
• Electromagnet Lock Accessories; Type: 3-Button Hand Held Wireless Transmitter; For Use With: LCN Automatic Doors (Power Operators); Material: Cast Iron; Material: Cast Iron; For Use With: LCN Automatic Doors (Power Operators); Type: 3-Button Hand Held Wir
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill Power Series; Number Of Flutes: 4; Overall Length: 1.26
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 1.26
• Electromagnet Lock Accessories; Type: 2-Button Hand Held Wireless Transmitter; For Use With: LCN Automatic Doors (Power Operators); Material: Cast Iron; Material: Cast Iron; For Use With: LCN Automatic Doors (Power Operators); Type: 2-Button Hand Held Wir
• Ball End Mill: 0.25″ Dia, 4 Flute, Solid Carbide 4″ OAL, DG Diamond Coated, Series 7430
• Electromagnet Lock Accessories; Type: 4-Button Hand Held Wireless Transmitter; For Use With: LCN Automatic Doors (Power Operators); Material: Cast Iron; Material: Cast Iron; For Use With: LCN Automatic Doors (Power Operators); Type: 4-Button Hand Held Wir
• Electromagnet Lock Accessories; Type: Hand Held Transmitter; For Use With: Touchless Actuators; Material: Cast Iron; Material: Cast Iron; For Use With: Touchless Actuators; Type: Hand Held Transmitter; Accessory Type: Hand Held Transmitter; Type: Hand Hel
• Electromagnet Lock Accessories; Type: Hand Held Transmitter; For Use With: Touchless Actuators; Material: Cast Iron; Material: Cast Iron; For Use With: Touchless Actuators; Type: Hand Held Transmitter; Accessory Type: Hand Held Transmitter; Type: Hand Hel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1375; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill Head: 5 Flutes Solid Carbide, Super-A Coated, Series 6861
• Corner Radius End Mill Head: 5 Flutes Solid Carbide, Super-A Coated, Series 6861
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Spiral Flute Tap: M25 x 1.50, DIN 374, 4 Flute, Semi-Bottoming, 6HX Class of Fit, High Speed Steel-E-PM, TiAlN Finish Right Hand Flute, Right Hand Thread, Series T300
• Square End Mill: 1'' Dia, 1-3/4'' LOC, 1'' Shank Dia, 4-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6484
• Knob Locksets; Type: Keyless; Passage; Door Thickness: 1 3/8 - 2; Back Set: 2-3/4; Material: Brass; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1 3/8 - 2; Material: Brass; Design/Shape: Ball Knob; Additional Information: 3-3/8″ Convex Rose; S
• Dummy Lever Lockset for 1-3/4 to 2-1/4″ Thick Doors 6 or 7 Pin Length Best & Compatible (Core Not Included), 2-3/4″ Backset, Satin Chrome Finish
• Polyester Film Tape: 3″ Wide, 72 yd Long, 1.9 mil Thick 28 Lb/In Tensile Strength, Acrylic Adhesive, -60 to 300 ° F
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M39x3.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Additional
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M39x3.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Additio
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M39x4.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Additio
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M39x4.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Additional
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Variable ° Helix, AlCrTiN Coated, Corner Radius End, Centercutting
• Electromagnet Lock Accessories; Type: Stand Alone Door Alarm With Strobe; For Use With: Access Control; Material: Steel; Material: Steel; For Use With: Access Control; Type: Stand Alone Door Alarm With Strobe; Accessory Type: Stand Alone Door Alarm With S
• Dark Gray Double-Sided Foam Tape: 1-1/2″ Wide, 36 yd Long, 45 mil Thick, Acrylic Adhesive
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-3/8 - 18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Teeth pe
• Threaded Ring Gage: 1-5/16-18 Thread, UNEF, Class 2A, Go
• Threaded Ring Gage: 1-5/16-12 Thread, UNF, Class 2A, Go
• Threaded Ring Gage: 1-5/16-18 Thread, UNEF, Class 2A, No Go
• Threaded Ring Gage: 1-5/16-12 Thread, UNF, Class 3A, No Go
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-3/8 - 18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Teeth
• Corner Radius End Mill: 7/8″ Dia, 1-5/16″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 7/8″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Threaded Ring Gage: 1-5/16-18 Thread, UNEF, Class 3A, Go
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-3/8 - 18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Teeth pe
• Corner Radius End Mill: 7/8″ Dia, 1-5/16″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 7/8″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Threaded Ring Gage: 1-5/16-18 Thread, UNEF, Class 3A, No Go
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M1.8x0.35; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 0; Teeth
• Corner Radius End Mill: 7/8″ Dia, 1-5/16″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 7/8″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Pipe Thread Plug Gage: Tapered, 1-1/2-11-1/2, Single End
• Impact Socket: 6-Point
• Corner Radius End Mill: 7/8″ Dia, 1-5/16″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 7/8″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-3/8 - 18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Teeth
• Corner Radius End Mill: 7/8″ Dia, 1-5/16″ LOC, 2 Flutes, Solid Carbide 4″ OAL, 7/8″ Shank Dia, 25 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2863
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M1.8x0.35; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 0; Teeth per
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Threaded Ring Gage: 1-5/16-12 Thread, UNF, Class 2A, No Go
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1040; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Pipe Thread Plug Gage: Tapered, 1-1/2-11-1/2, Single End
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M1.6x0.35; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Teeth per Inch: 0.35;
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Snap Gages; Minimum Measurement (mm): 77.80; Maximum Measurement (Inch): 3-7/16; Maximum Measurement (mm): 87.30; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 3-7/16; Minimum Measurement (Inch): 3-1/16; Minimum Measurement (Decimal In
• Threaded Ring Gage: 1-5/16-12 Thread, UNF, Class 3A, Go
• Snap Gages; Minimum Measurement (mm): 69.90; Maximum Measurement (Inch): 3-1/16; Maximum Measurement (mm): 77.80; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 3-1/16; Minimum Measurement (Inch): 2-3/4; Minimum Measurement (Decimal Inc
• Strut & Rod Cutters; Type: Cordless; Power Type: Battery; Cutting Capacity: 3/8 inch
• Ball End Mill: 1″ Dia, 2.25″ LOC, 4 Flute, Solid Carbide 5″ OAL, 1″ Shank Dia, 37 ° Helix, AlCrN Coated, Single End, Series XPVSB
• Clear Double-Sided Acrylic Tape: 12″ Wide, 5 yd Long, 20 mil Thick, Acrylic Adhesive
• Glass Cloth Tape; Width (Inch): 2; Material Type: PTFE; Color: Light Brown; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 4.5000; Tensile Strength (Lb./Inch): 110.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Tempe
• Square End Mill: 3/4'' Dia, 1.624'' LOC, 3/4'' Shank Dia, 4-1/2'' OAL, 8 Flutes, Solid Carbide Single End, 50 ° Helix, RH Cut, RH Flute
• Duct Tape: 6″ Wide, 3.5 mil Thick, Aluminum Foil Silicone Adhesive, 20 lb/in Tensile Strength
• Hook & Loop; Shape: Roll; Tape Width: 3.00 in; Color: Black; Roll Length (Feet): 75.00; Component Type: Hook & Loop
• Spiral Flute Tap: 1-1/8-8, UN, 4 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 1.575″ Thread Length, 7.087″ OAL, Right Hand Flute, Right Hand Thread, H5, Series CU50C310
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 9/16-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material:
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 9/16-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Material:
• Screw Machine Length Drill Bit: 180 °, Solid Carbide Coated, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B707
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SAP-NB
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9466; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Jobber Length Drill Bit: 0.4685″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Spiral Flute Tap: M39 x 4.00, Metric, 5 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D13 & D15,Series 0393
• Corner Chamfer End Mill: 0.75″ Dia, 2.25″ LOC, 5 Flute, 0.024″ Chamfer Width, Solid Carbide 4-7/8″ OAL, 3/4″ Shank Dia, AlTiN Coated
• Jobber Length Drill Bit: 0.4724″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 16; Centercutting: No; Flute Type: Spiral; Number Of Flutes: 8; End Mill Material: Solid Carbide; Overall Length: 0.79
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 12; Centercutting: No; Flute Type: Spiral; Number Of Flutes: 5; End Mill Material: Solid Carbide; Overall Length: 0.94
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 6; Width (Inch): 0.25; Color: Red
• Belt Sanding Machine: 6″ Wide
• Privacy Lever Lockset for 1-3/4 to 2-1/4″ Thick Doors Keyless, 2-3/4″ Backset, Satin Chrome Finish
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 6; Width (Inch): 0.25; Color: Yellow
• Jobber Length Drill Bit: 0.689″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Whistle Notch Shank, Series 1132
• Electronic Outside Micrometer: 4″, Solid Carbide Measuring Face 0.00005″ Resolution, Ratchet Stop Thimble
• Mobile Battery Lift Table: 400 lb Capacity, 8-3/4 to 29″ Lift Height, 17-5/8″ Platform Width, 27-1/2″ Platform Length 8-3/4″ to 29″ Lift Height, 27-1/2″ Platform Length x 17-5/8″ Platform Width
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Ball End Mill: 0.75″ Dia, 3 Flute, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Impact Socket: 1-1/2″ Drive 6-Point, 110 mm OAL
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 45 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 45 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 1/8″ Radius, 3 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 45 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• CNC Storage Accessories; For Use With: Tool Holder Cart; Description: 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 HSK-A/E/F50 per carrier
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• CNC Storage Accessories; For Use With: Safe Tool Holder Fixture; Description: 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 SK40 per carrier; Type: Tool Holder Carrier; Type: Tool Holder Carrier
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• CNC Storage Accessories; For Use With: Safe Tool Holder Fixture; Description: 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 SK30 per carrier; Type: Tool Holder Carrier; Type: Tool Holder Carrier
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• CNC Storage Accessories; For Use With: Safe Tool Holder Fixture; Description: 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 CAT40 per carrier; Type: Tool Holder Carrier; Type: Tool Holder Carrier
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• CNC Storage Accessories; For Use With: Safe Tool Holder Fixture; Description: 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 PSC 63 per carrier; Type: Tool Holder Carrier; Type: Tool Holder Carrier
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• UHMW Film Tape: 3″ Wide, 36 yd Long, 10 mil Thick 80 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• CNC Storage Accessories; For Use With: Tool Holder Cart; Description: 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 HSK-A/E/F63 per carrier