Products

• Threaded Ring Gage: 1-1/8-18 Thread, UNEF, Class 3A, Go
• Threaded Ring Gage: 1-1/8-18 Thread, UNEF, Class 3A, No Go
• Tapered End Mill: 20 ° per Side, 4 Flutes, Solid Carbide, Tapered End SIRON-A Finish, Series JH734
• Lockset Accessories; Type: Service Equipment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: Service Equipment; For Use With: Best
• Jobber Length Drill Bit: 0.5512″ Dia, 143 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.5156″ Dia, 143 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.4961″ Dia, 143 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.4803″ Dia, 143 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.5118″ Dia, 143 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.4843″ Dia, 143 °, Solid Carbide AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.5156″ Dia, 140 °, Solid Carbide TiN, AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.4844″ Dia, 140 °, Solid Carbide TiN, AlTiN Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, AlTiCrN Coated, Corner Radius End, Centercutting, Series HS
• Screw Machine Length Drill Bit: 0.375″ Dia, 128 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank, Series B556
• Drawer Slides; Type: Drawer Slide; Extension Style: Full; Slide Length: 508.20; Travel Length: 522.20; Load Capacity (Lb.): 530.000; Width (Inch): 0.91; Finish/Coating: Zinc Plated; Additional Information: Mounting Type: Side; Closure Type: Conventional;
• Square End Mill: 3/4'' Dia, 3/4'' LOC, 3/4'' Shank Dia, 4'' OAL, 4 Flutes, Solid Carbide Single End, 50 ° Helix, RH Cut, RH Flute
• Guhring Roughing End Mill for Aluminum 16.00mm Diameter 16.0mm Shank 32.00mm Length of Cut 108mm Overall with Coolant Thru
• Corner Radius End Mill Head: 9 Flutes Solid Carbide
• Corner Radius End Mill Head: 9 Flutes Solid Carbide
• Multi-Polymer Film Tape: 12″ Wide, 100 yd Long, 2 mil Thick 4,500 Lb/In Tensile Strength, Acrylic Adhesive
• Corner Radius End Mill Head: 9 Flutes Solid Carbide
• Pipe Thread Plug Gage: Tapered, 1-1/2-11-1/2
• CNC Storage Accessories; For Use With: Tool Holder Cart; Description: 8 pcs. Tool holder carrier for tool holder rack with recess to hold 4 HSK-A/F80 per carrier
• Pipe Thread Plug Gage: Straight, 1/4-18, Double End Handle Size 2
• Pipe Thread Plug Gage: Straight, 3/8-18, Double End Handle Size 3
• Pipe Thread Plug Gage: Straight, 1/2-14, Double End
• Pipe Thread Plug Gage: Straight, 1/2-14, Double End Handle Size 3
• Pipe Thread Plug Gage: Straight, 3/4-14, Double End Handle Size 4
• Threaded Ring Gage: 1-1/4-18 Thread, UNEF, Class 2A, No Go
• Threaded Ring Gage: 1-1/4-18 Thread, UNEF, Class 2A, Go
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #6-40; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #10-32; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/4-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material: Hig
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #12-28; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: Hi
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 7; Length (yd): 60.00; Thickness (mil): 2.3000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 46
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #6-32; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #12-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: Hi
• Pipe Thread Plug Gage: Straight, 1/8-27, Double End
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #5-40; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #10-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/4-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material: High S
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #8-36; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: Hig
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #5-44; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #8-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: Hig
• Ring Pipe Thread Gages; Thread Size: 3/4-14; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Pitch Diameter: 0.9873-0.982; Handle: 4; Go ™No ™Go: No Go; Specifi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/4-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material: Hig
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill: 0.2362″ Dia, 0.5118″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/4-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material: High S
• Pipe Thread Plug Gage: 3/8-19, Double End
• Ring Pipe Thread Gages; Thread Size: 1-1/4-11-1/2; Classification: L1; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: ANPT; Additional Information: Specification Met: SAE AS71051; Thread Size (Inch): 1-1/4-11-
• Threaded Ring Gage: 1-5/16-18 Thread, UNEF, Class 2B, Go & No Go
• Threaded Ring Gage: 1-5/16-18 Thread, UNEF, Class 3B, Go & No Go
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #8-36; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: Hig
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/4-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material: High S
• Pipe Thread Plug Gage: Tapered, 1-1/4-11-1/2, Single End
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #5-44; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: Hi
• Snap Gages; Minimum Measurement (mm): 96.80; Maximum Measurement (Inch): 4-3/16; Maximum Measurement (mm): 106.4; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 4-3/16; Minimum Measurement (Inch): 3-13/16; Minimum Measurement (Decimal I
• Snap Gages; Minimum Measurement (mm): 87.30; Maximum Measurement (Inch): 3-13/16; Maximum Measurement (mm): 96.8; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 3-13/16; Minimum Measurement (Inch): 3-7/16; Minimum Measurement (Decimal I
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #5-40; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: Hi
• Ring Pipe Thread Gages; Thread Size: 3/4-14; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Pitch Diameter: 0.9873-0.982; Handle: 4; Go ™No ™Go: Go; Specificat
• Pipe Thread Plug Gage: Straight, 2-11-1/2
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/4-7; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 5; Material: High Sp
• Pipe Thread Plug Gage: Straight, 2-11-1/2
• Threaded Ring Gage: 1-1/4-18 Thread, UNEF, Class 3A, Go
• Threaded Ring Gage: 1-1/4-18 Thread, UNEF, Class 3A, No Go
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/4-7; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 5; Material: High
• Jobber Length Drill Bit: 0.5394″ Dia, 140 °, Solid Carbide AlCrN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/4-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 5; Material: Hig
• Jobber Length Drill Bit: 0.5512″ Dia, 140 °, Solid Carbide AlCrN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #8-32; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: Hig
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #6-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 00; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #12-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #10-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 0; Material: Hi
• Pipe Thread Plug Gage: Straight, 3/8-18, Double End
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #10-32; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #6-40; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 00; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #12-28; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 0; Material: Hi
• Pipe Thread Plug Gage: Straight, 1/4-18, Double End
• Pipe Thread Plug Gage: Straight, 1/8-27, Double End Handle Size 2
• UHMW Film Tape: 9/16″ Wide, 36 yd Long, 7.7 mil Thick 45 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Roughing End Mills; Mill Diameter (Inch): 0.75; Mill Diameter (Decimal Inch): 0.7500; Number of Flutes: 4; Pitch: Fine; Length of Cut (Inch): 1-1/2; Shank Diameter (Inch): 0.75; Material: Solid Carbide; Finish/Coating: WXL; Overall Length (Inch): 4.25; Ce
• Roughing End Mills; Mill Diameter (Inch): 0.75; Mill Diameter (Decimal Inch): 0.7500; Number of Flutes: 4; Pitch: Fine; Length of Cut (Inch): 1-1/2; Shank Diameter (Inch): 0.75; Material: Solid Carbide; Finish/Coating: WXL; Overall Length (Inch): 4.25; Ce
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 30.000; Connection Type: Duo-Lock 20; Centercutting: No; Flute Type: Spiral; Number Of Flutes: 8; End Mill Material: Solid Carbide; Overall Length: 0.98
• Corner Radius End Mill: 1″ Dia, 1-1/4″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SM5F-NB
• Corner Radius End Mill: 1″ Dia, 1-1/4″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Electromagnet Lock Accessories; Type: Touchless Switch; For Use With: Interior; Exterior Doors; Material: Polycarbonate; Material: Polycarbonate; For Use With: Interior; Exterior Doors; Type: Touchless Switch; Accessory Type: Touchless Switch; Type: Touch
• Electromagnet Lock Accessories; Type: Touchless Switch; For Use With: Interior; Exterior Doors; Material: Polycarbonate; Material: Polycarbonate; For Use With: Interior; Exterior Doors; Type: Touchless Switch; Accessory Type: Touchless Switch; Type: Touch
• Electromagnet Lock Accessories; Type: Touchless Switch; For Use With: Interior; Exterior Doors; Material: Polycarbonate; Material: Polycarbonate; For Use With: Interior; Exterior Doors; Type: Touchless Switch; Accessory Type: Touchless Switch; Type: Touch
• Drill Bit Set: Jobber Length Drill Bits, 29 Pc, 0.0625″ to 0.5″ Drill Bit Size, 118 °, High Speed Steel TiN, N, Straight Shank, Series 651
• Commercial Hinges; Length (Inch): 4-1/2; Thickness (Decimal Inch): 0.1340; Number of Knuckles: 5.000; Stanley Finish Code: US26D; Finish/Coating: US26D; Box Quantity: 3; Hand: Non-Handed; Number of Ball Bearings: 0; Material Grade: Grade 1; Number of Hole
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 25.00; Mill Diameter (Decimal Inch): 0.9840; Length of Cut (mm): 49.8000; Connection Type: E25; Overall Length (mm): 73.6000; Flute Type: Spiral; Material Grade: WJ30RA; Helix Angle: 50; C
• Slitting & Slotting Saw: 4″ Dia, 1/8″ Thick, 1″ Arbor Hole, 36 Teeth, Solid Carbide Bright/Uncoated
• Filament & Strapping Tape; Type: Safety Mirror Backing Tape; Color: White; Width (Inch): 12; Length (yd): 33.33; Thickness (mil): 6.0000; Tensile Strength: 50; Length (mm): 100.00
• Filament & Strapping Tape; Type: Safety Mirror Backing Tape; Color: White; Width (Inch): 4; Length (yd): 33.33; Thickness (mil): 6.0000; Tensile Strength: 50; Length (mm): 100.00
• Filament & Strapping Tape; Type: Safety Mirror Backing Tape; Color: White; Width (Inch): 6; Length (yd): 33.33; Thickness (mil): 6.0000; Tensile Strength: 50; Length (mm): 100.00
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.2222; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Side Chip Saw: 6″ Blade Dia, 9/64″ Blade Thickness, 1″ Arbor Hole Dia, 42 Teeth, High Speed Steel TiN Finish, Straight Tooth
• Square End Mill: 3/4'' Dia, 2-1/2'' LOC, 3/4'' Shank Dia, 5-1/2'' OAL, 5 Flutes, Solid Carbide Single End, Duarise Finish, 0 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Pipe Thread Plug Gage: Tapered, 1-1/4-11-1/2
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/8-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material: High S
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 15/16-20; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 15/16-20; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 15/16-20; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material: Hi
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/8-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material: Hig
• Ring Pipe Thread Gages; Thread Size: 1-11-1/2; Classification: L1; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: ANPT; Additional Information: Specification Met: SAE AS71051; Thread Size (Inch): 1-11-1/2
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/8-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material: High S
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 15/16-20; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/8-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material: Hig
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1024; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPV
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 7'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Square End Mill: 1'' Dia, 4'' LOC, 1'' Shank Dia, 7'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 3/16″ Dia, 15/16″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3″ OAL, Helix, DG Diamond Coated, Corner Radius End, Centercutting, Series 7470
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 7'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 3/16″ Dia, 15/16″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, Helix, DG Diamond Coated, Corner Radius End, Centercutting, Series 7470
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Ball End Mill: 1″ Dia, 3″ LOC, 4 Flute, Solid Carbide 6″ OAL, 1″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Square End Mill: 1'' Dia, 4'' LOC, 1'' Shank Dia, 7'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• 1″ Diam 4-Flute 35/38° Solid Carbide Ball End Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• Laser & Ultrasonic Distance Finders; Minimum Distance: 82; Maximum Distance (Meters): 262; Maximum Distance (Feet): 262; Maximum Distance: 262; Distance Meter Functions: Align; 4-Point Crossbeam; Plumb; Level; Square; Accuracy: +/- 1/8″; Minimum Distance
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Duct Tape: 6″ Wide, 4 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.09″ Radius, 6 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.19″ Radius, 6 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 1/4″ Radius, 6 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Electric Strikes; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Finish: Stainless Steel
• Jobber Length Drill Bit: 0.165″ Dia, 130 °, Brazed Solid Carbide Polycrystaline Diamond Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Electromagnet Lock Accessories; Type: Hand Held Transmitter; For Use With: Touchless Actuators; Material: Cast Iron; Material: Cast Iron; For Use With: Touchless Actuators; Type: Hand Held Transmitter; Accessory Type: Hand Held Transmitter; Type: Hand Hel
• Side Chip Saw: 7″ Blade Dia, 1/8″ Blade Thickness, 1-1/4″ Arbor Hole Dia, 44 Teeth, High Speed Steel TiN Finish, Staggered Tooth
• Electromagnet Lock Accessories; Type: Wireless Pushplate; For Use With: Touchless Actuators; Material: Stainless Steel; Material: Stainless Steel; For Use With: Touchless Actuators; Type: Wireless Pushplate; Accessory Type: Wireless Pushplate; Type: Wirel
• Side Chip Saw: 7″ Blade Dia, 1/8″ Blade Thickness, 1″ Arbor Hole Dia, 44 Teeth, High Speed Steel TiN Finish, Staggered Tooth
• Electromagnet Lock Accessories; Type: Hardwired Pushplate; For Use With: Touchless Actuators; Material: Stainless Steel; Material: Stainless Steel; For Use With: Touchless Actuators; Type: Hardwired Pushplate; Accessory Type: Hardwired Pushplate; Type: Ha
• Door Closer Accessories; Type: Magnetic Door Position Switch; For Use With: Aluminum, Wood & Hollow Metal Doors; Finish: Aluminum; Standards: CAN-ULC-S104; UL10C; Series: 7700; Finish/Coating: Aluminum; Type: Magnetic Door Position Switch; Accessory Type:
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• Turning Insert: DCGW21.51FN_A3 CTDMD05, Polycrystalline Diamond Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW21.52FN_A3 CTDMD05, Polycrystalline Diamond Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Spiral Flute Tap: 1-3/8-8, UN, 5 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish Right Hand Flute, Right Hand Thread, H5, Series CU50C310
• Ball End Mill Heads; Mill Diameter (Inch): 3/4; Mill Diameter (Decimal Inch): 0.7500; Number of Flutes: 6; Length of Cut (Inch): 3/4; Connection Type: E20; Overall Length (Decimal Inch): 2.2910; Material: Solid Carbide; Finish/Coating: HXT; Cutting Direct
• Turning Insert: DCGW32.5.5FNA3 CTDMD05, Polycrystalline Diamond Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Electromagnet Lock Accessories; Type: Access Control Keypad; For Use With: Indoor or Outdoor Applications; Material: Aluminum; Material: Aluminum; For Use With: Indoor or Outdoor Applications; Type: Access Control Keypad; Accessory Type: Access Control Ke
• Ball End Mill Heads; Mill Diameter (mm): 20.00; Mill Diameter (Decimal Inch): 0.7874; Number of Flutes: 6; Length of Cut (mm): 20.0000; Connection Type: E20; Overall Length (mm): 59.7000; Material: Solid Carbide; Finish/Coating: HXT; Cutting Direction: Ri
• Square End Mill: 1/2'' Dia, 1-1/2'' LOC, 4'' OAL, 10 Flutes, Solid Carbide Single End, CVD Finish, Helical Flute, RH Cut, RH Flute
• Corner Radius End Mill: 1″ Dia, 1.523″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 30 ° Helix, DLC Coated, Series 2874
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill Power Series; Number Of Flutes: 4; Overall Length: 1.57
• Corner Radius End Mill: 1″ Dia, 1.523″ LOC, 0.09″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, 30 ° Helix, DLC Coated, Series 2874
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.12″ Radius, 5 Flutes, Solid Carbide 4-3/4″ OAL, 3/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2108
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 4-3/4″ OAL, 3/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2108
• Corner Radius End Mill: 0.7874″ Dia, 5 Flutes, Solid Carbide Variable ° Helix, EXO Coated, Centercutting End, Series 2110
• Corner Radius End Mill: 0.7874″ Dia, 5 Flutes, Solid Carbide Variable ° Helix, EXO Coated, Centercutting End, Series 2110
• Guhring Optimized Roughing End Mill for Aluminum 16.00mm Diameter 16.0mm Shank 32.00mm Length of Cut 132mm Overall with Coolant Thru
• Corner Radius End Mill: 0.7874″ Dia, 5 Flutes, Solid Carbide Variable ° Helix, EXO Coated, Centercutting End, Series 2110
• Square End Mill: 80mm LOC, 20mm Shank Dia, 155mm OAL, 5 Flutes, Solid Carbide Single End, Duarise Finish, 0 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.7874″ Dia, 5 Flutes, Solid Carbide Variable ° Helix, EXO Coated, Centercutting End, Series 2110
• Ball End Mill: 0.75″ Dia, 1.125″ LOC, 2 Flute, Solid Carbide 6″ OAL, 5/8″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 5 Flutes, Solid Carbide 4-3/4″ OAL, 3/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2108
• Screw Machine Length Drill Bit: 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 6498
• Jobber Length Drill Bit: 0.3346″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 4-3/4″ OAL, 3/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2108
• Corner Radius End Mill: 0.7874″ Dia, 5 Flutes, Solid Carbide Variable ° Helix, EXO Coated, Centercutting End, Series 2110
• Jobber Length Drill Bit: 0.374″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.7874″ Dia, 5 Flutes, Solid Carbide Variable ° Helix, EXO Coated, Centercutting End, Series 2110
• Jobber Length Drill Bit: 0.3819″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1157; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill: 0.7874″ Dia, 5 Flutes, Solid Carbide Variable ° Helix, EXO Coated, Centercutting End, Series 2110
• Polyester Film Tape: 2″ Wide, 72 yd Long, 1.9 mil Thick 28 Lb/In Tensile Strength, Acrylic Adhesive, -60 to 300 ° F
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 1/4″ Radius, 6 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.19″ Radius, 6 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• 7,000 kg Load Capacity Safety Engineered Center Pull Hoist Ring M30 x 3.5 Thread, 66mm Thread Length, Alloy Steel, Black Oxide Finish
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M22x2.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Additio
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M22x1.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Additional
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M22x1.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Additio
• Adjustable Stop Countersink Cage
• Corner Radius End Mill: 3/4″ Dia, 3″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 6″ OAL, 3/4″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM7F
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/8-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material: Hig
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/8-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material: High S
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: No Go; Thread Size: 1-1/8-7; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 4; Material: High
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go; Thread Size: 1-1/8-7; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 4; Material: High Sp
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 30 ° Helix, WXL Coated, Centercutting End, Series 3670
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M22x2.50; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Additional
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 30 ° Helix, WXL Coated, Centercutting End, Series 3670
• Screw Machine Length Drill Bit: 0.622″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.6102″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.625″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Screw Machine Length Drill Bit: 0.6299″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Snap Gages; Minimum Measurement (mm): 125.40; Maximum Measurement (Inch): 5-5/16; Maximum Measurement (mm): 134.9; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 5-5/16; Minimum Measurement (Inch): 4-15/16; Minimum Measurement (Decimal
• Snap Gages; Minimum Measurement (mm): 134.90; Maximum Measurement (Inch): 5-11/16; Maximum Measurement (mm): 144.5; Indicator Type: No Indicator; Maximum Measurement (Decimal Inch): 5-11/16; Minimum Measurement (Inch): 5-5/16; Minimum Measurement (Decimal
• Pipe Thread Plug Gage: Tapered, 2-11-1/2, Single End
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Polyurethane Film Tape: 4″ Wide, 5 yd Long, 14 mil Thick 75 Lb/In Tensile Strength, Acrylic Adhesive
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 1/4″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Edge & Center Finder Sets; Product Type: Edge Finder Set; End Type: Single; Head Contact Type: Ball; Head Diameter: 75.0000; Head Diameter (Decimal Inch): 75.0000; Shank Diameter: 16.0000; Accuracy (Decimal Inch): 0.01; Number of Pieces: 5; Includes: Edge
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.12″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 3/4″ Dia, 2-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 5″ OAL, 3/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Jobber Length Drill Bit: 0.625″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.622″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.6181″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.4531″ Dia, 140 °, Solid Carbide Bright/Uncoated, 4.6654″ OAL, Right Hand Cut, Straight Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.626″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.6024″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.5984″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Door Damper: 10″ Closer Body Length Duranodic Bronze Finish, Non-Handed
• Jobber Length Drill Bit: 0.5906″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Combination Wrench: 31-3/4'' OAL
• Jobber Length Drill Bit: 0.5807″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.5787″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.5748″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.5709″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.5591″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Jobber Length Drill Bit: 0.5625″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.5551″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.5945″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.6299″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.6102″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Jobber Length Drill Bit: 0.5827″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 5.236″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-A0
• Corner Radius End Mill Head: 1″ Dia, 2-1/4″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• Electromagnet Lock Accessories; Type: Exterior Digital Keypad; For Use With: Outdoor Applications; Material: Steel; Material: Steel; For Use With: Outdoor Applications; Type: Exterior Digital Keypad; Accessory Type: Exterior Digital Keypad; Type: Exterior
• Corner Radius End Mill: 1″ Dia, 4-1/8″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 4-1/8″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 4-1/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 4-1/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 1″ Dia, 5 Flute, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 4-1/8″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Drill Bit Set: Screw Machine Length Drill Bits, 115 Pc, 0.04″ to 0.5″ Drill Bit Size, 135 °, Cobalt Split-Point, Straight Shank, Series MS115CS
• Ball End Mill: 1″ Dia, 5 Flute, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• 1/2″ Radius, 4-1/4″ Cut Diam, 1″ Circle Diam, 7/16″ Cut Width, 1-1/4″ Arbor Concave Radius Cutter High Speed Steel, Uncoated, 1-9/16″ OAL, 10 Teeth, Form Relieved
• Glass Cloth Tape; Width (Inch): 4; Material Type: PTFE; Color: Black; Adhesive Material: Silicone; Length (yd): 18.00; Thickness (mil): 7.0000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.1593; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball End Mill: 0.875″ Dia, 3″ LOC, 3 Flute, Solid Carbide 6″ OAL, 7/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0235; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Spiral Point Tap: 7/8-9, DIN/ANSI, 4 Flutes, Plug, 2BX, HSS-E-PM, TiAlN Finish 34 mm Thread Length, 140 mm OAL, Right Hand, Series T200
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8487; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Dial Bore Gage: 2 to 6″ Dia 11 Anvil, 0.000080″ Accuracy
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1242; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Hand Hex & Torx Bit Sockets; Socket Type: Torx Bit Socket; Drive Size (Fractional Inch): 1/2; Torx Size: T60; Bit Length (mm): 25.00
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 40 ° Helix, AlTiN+ Coated, Corner Radius End, Centercutting, Series 6/44
• Corner Radius End Mill: 3/4″ Dia, 7/8″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, Variable ° Helix, AlCrTiN Coated, Corner Radius End, Centercutting
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1/2-28; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 2; Material: H
• Pipe Thread Plug Gage: 1-1/4-11, Double End