Products

• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7747; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standard
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7538; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standard
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.3188; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Turning Insert: RPGN43T0102 WIS30, Ceramic
• Ball Grip Quick-Release Pin: Ring Handle, 3/8″ Pin Dia, 2″ Usable Length 3.49″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Cut-Resistant Sleeve: Size Medium, HPPE, Gray, ANSI Cut A4
• TIG Torch Parts & Accessories; Type: Water Hose; Hose Type: Water; Length (Feet): 25.0; For Use With: 20; For Use With: 20; PSC Code: 3438; For Use With: 20; Type: Water Hose
• Threaded Rod: 7/16-14, 3' Long, Stainless Steel, Grade 304 (18-8)
• Enamel Spray Paint: Black, Gloss, 12 oz
• Enamel Spray Paint: Flat Black, Flat, 12 oz
• Strip: Buna-N Rubber, 3/4″ Wide, 120″ Long, White Durometer 50, Plain Backing
• Enamel Spray Paint: White, Gloss, 12 oz
• Ball End Mill: 0.20 mm Dia, 0.15 mm LOC, 2 Flute, Solid Carbide
• Ball End Mill: 0.20 mm Dia, 0.15 mm LOC, 2 Flute, Solid Carbide
• Soldering Station Accessories; For Use With: 1 kg Roll Of Solder Wire; Type: Solder Spool Single Reel; Type: Solder Spool Single Reel; Accessory Type: Solder Spool Single Reel
• Ball End Mill: 0.20 mm Dia, 0.15 mm LOC, 2 Flute, Solid Carbide
• M4x0.7, 23.53mm OAL, 8mm Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 14mm Body Length, 9.53mm Thread Length, 10.1mm Thread Depth, Grade T-3, Uncoated
• Encapsulated Suits: Medium, Orange, Multi-Layer Non-Woven Barrier Laminate Fabric, N/AClosure, Taped & Welt, Yes
• #6 Screw 9/16″ OAL 0.14″ ID x 1/4″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Ball End Mill: 0.20 mm Dia, 0.15 mm LOC, 2 Flute, Solid Carbide
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 10' Long x 7' Wide, 12 mil Polyethylene, Rectangle
• Lawn Sprinklers; Type: Sprinkler; Thread Size: 3/4; Base Style: Sled; Travelling Sprinkler: No; Spray Pattern: Circular; Description: Pulsating
• Notebook: 200 Sheets, College Ruled Black Cover
• Pipe Square Head Plug: 3/4″ Fitting, 316 Stainless Steel MNPT, Threaded, 150 psi
• Desk Pad: 13 Sheets, Planner Ruled Ocean Blue Cover
• Ball Grip Quick-Release Pin: L-Handle, 5 mm Pin Dia, 50 mm Usable Length 82.3 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.2223; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Ring Handle, 3/16″ Pin Dia, 1-3/4″ Usable Length 3.24″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Threaded Studs; Style: Fully Threaded; System of Measurement: Inch; Thread Size: 5/8-11 in; 5/8-11; Overall Length (Inch): 6; Overall Length (Decimal Inch): 6 in; Overall Length (mm): 6 in; Material: Alloy Steel; Finish/Coating: Black Oxide; Class: 2A; Gr
• Straight Blade Plug: Industrial, 5-20P, 125VAC, Black & White Self-Grounded, 20A, Nylon Body, 2 Poles, 3 Wires
• Safety Goggles; Product Service Code: 4240
• Black Hex Bushing: 2 x 3/4″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• 3/4" 316 Stainless Steel Pipe Plug
• Black Hex Bushing: 2 x 1/2″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Coolant Hose Nozzles; Type: Nozzle Tip; Nozzle Type: None; Hose Inside Diameter (Inch): 1/2; Thread Type: 1; Series: X-15; Nozzle Type: None
• Plastic Bar: Garolite, 1/4″ Thick, Green
• Multi-Purpose Fence & Net; Type: Loading Dock Netting; Mesh Size: 6 in; Color: Safety Orange; Material: Polyester
• Boring Head Parts & Tools; Type: Hardware Kit; Tool Type: Hardware Kit; Includes: Torx Wrench; Dial Screw; Wedge; Boring Head Body; Insert Holder
• Thread Forming Tap
• Ball End Mill: 2.00 mm Dia, 1.60 mm LOC, 2 Flute, Solid Carbide
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 22' Long x 10' Wide, 5 mil Polyethylene, Rectangle
• FlexC 65 Quick-Change Collet 1-3/4" Square Smooth
• Ball End Mill: 2.50 mm Dia, 2.00 mm LOC, 2 Flute, Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9478; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0272; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Indexable Drill Insert: 32 BK8425, Carbide TiAlN & TiN Finish, Square
• Indexable Drill Insert: 34 BK8425, Carbide TiAlN & TiN Finish, Square
• Spiral Point Tap: 3/4-10 UNC, 3 Flutes, Plug Chamfer, HSS, TiN Coated
• Wet Mop Loop: Clamp Jaw, Medium, White Mop, Cotton Green Headband, 4
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9186; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: TCMT32.52MW4 WPP20G, Carbide
• Ball End Mill: 1.00 mm Dia, 0.75 mm LOC, 2 Flute, Solid Carbide
• Ball End Mill: 3.00 mm Dia, 3.50 mm LOC, 2 Flute, Solid Carbide
• Ball End Mill: 4.00 mm Dia, 4.00 mm LOC, 2 Flute, Solid Carbide
• Indexable Drill Insert: SCMTGH-I PR1535, Carbide 90 ° Square
• Indexable Drill Insert: SCMTGH-E PR1225, Carbide 90 ° Square
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.3077; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Cut-Off Inserts; Insert Style: TK; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: CR9025; Cutting Width (mm): 2.20; Insert Holding Method: Self Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 8; Reli
• Plastic Sheet: POM, 3/8" Thick, 24" Wide, 4' Long, Natural, 9700 psi Tensile Strength
• Cut-Off Inserts; Insert Style: TK; Insert Size Code: 24; Insert Material: Solid Carbide; Manufacturer Grade: CR9025; Cutting Width (mm): 2.40; Insert Holding Method: Self Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 8; Rel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7179; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Cut-Off Inserts; Insert Style: TKN; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: CR9025; Cutting Width (mm): 1.60; Insert Holding Method: Self Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief A
• Cut-Off Inserts; Insert Style: TKN; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: CR9025; Cutting Width (mm): 2.20; Insert Holding Method: Self Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief An
• Cut-Off Inserts; Insert Style: TK; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: CR9025; Cutting Width (mm): 2.20; Insert Holding Method: Self Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 8; Relief
• Lever Locksets; Lockset Type: Classroom; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Less Core; Material: Metal; Door Thickness: 1-3/4; Finish: Aged Bronze
• Cut-Off Inserts; Insert Style: TK; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: CR9025; Cutting Width (mm): 3.10; Insert Holding Method: Self Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 8; Reli
• Woodruff Keyseat Cutter: 1/2" Cut Dia, 1/8" Cut Width, 1/2" Shank Dia, Straight Tooth
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8514; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• GZ305.0150.080.AA.04.L Carbide Cutoff Insert TiCN Finish, 0° Neutral Lead Angle, LH Insert, 1.5mm Cutting Width, Series 25649
• Indexable Drill Insert: 03 BK8425, Carbide TiAlN & TiN Finish, Trigon
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 3″; Color: Red; Material: Vinyl; Size: 8-1/2 x 11″; Minimum Order Quantity: Vinyl; Material: Vinyl
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 3″; Color: Blue; Material: Vinyl; Size: 8-1/2x11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use Tool
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7113; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use Tool
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use To
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use Tool
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use To
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use Tool
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9302; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Milling Insert: SNMU160612TN-M18 MP3501, Carbide
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 3; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use To
• Deep Groove Ball Bearing: 32 mm OD Bearing Number 6804
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Micro Drill Bit: 0.0315″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0354″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0394″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Tank Flanges; Overall Height (Inch): 5/16
• Micro Drill Bit: 0.0217″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0335″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0236″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0374″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0276″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0197″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0295″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0256″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Indexable Drill Insert: 32 BK8425, Carbide TiAlN & TiN Finish, Square
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9879; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Indexable Drill Insert: 34 BK8425, Carbide TiAlN & TiN Finish, Square
• Taper Length Drill Bit: 0.0197″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Cylindrical Shank, Series 219
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6966; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Wet & Dry-Cut Saw Blade: 9" Dia, 7/8" Arbor Hole, 16 Teeth
• Taper Length Drill Bit: 0.0295″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Ball Grip Quick-Release Pin: Ring Handle, 3/16″ Pin Dia, 1-1/2″ Usable Length 2.99″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 1-1/4″ Usable Length 2.74″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• DVD-R Disc: Use with DVD
• Ball Grip Quick-Release Pin: Ring Handle, 3/16″ Pin Dia, 1-1/2″ Usable Length 2.99″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Instrument Utility Cart: 64" Long, 24" Wide, Steel, 1200 lb Capacity, Gray
• 2-Sided Adjustable Shelf Utility Cart: 65-1/2" Long, 24" Wide, Steel, 3600 lb Capacity, Gray
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9945; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Flap Disc: 4-1/2″ Dia, 7/8″ Hole, Aluminum Oxide, Type 27 Non-Woven, Coarse Grade, Non-Woven & Nylon-Backed, 13,300 RPM
• Indexable Drill Insert: 01 BK7710, Carbide TiB2 Finish, Square
• Indexable Drill Insert: 01 BK6425, Carbide TiCN, Al2O3 & TiN Finish, Square
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, Square
• #10 Screw 1″ OAL 0.192″ ID x 5/8″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Indexable Drill Insert: 03 BK8430, Carbide TiAIN & TiN Finish, Square
• Indexable Drill Insert: 13 BK8425, Carbide TiAlN & TiN Finish, Square
• Indexable Drill Insert: 01 BK8425, Carbide TiAlN & TiN Finish, Square
• Selector Switch Accessories; Switch Accessory Type: Handle; For Use With: Harmony XB4 Flush Mounted Illuminated Selector Switch; Switch Style: Handle; Color: Green
• Indexable Drill Insert: 01 BK6115, Carbide TiCN, TiN & Al2O3 Finish, Square
• Grooving Tool: Interior, Right Hand, 1/8" Shank Dia
• Drywall Tape
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8912; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Personal Insect Repellents; Form: Liquid; Targeted Pest: Mosquitoes; Biting Insects; Ticks; Active Ingredient: Permethrin; Container Size: 24 oz; Container Type: Spray Bottle; Protection Time: 6; Concentration: .5; Standards: EPA Registered; Container Siz
• Chamfer Mill: 3/8" Dia, 3/8" Shank Dia, 22.5 deg, 3 Flute, Solid Carbide, Single End
• Chamfer Mill: 3/16" Dia, 3/16" Shank Dia, 45 deg, 2 Flute, Solid Carbide, Single End
• Hand & Body Lotions & Creams; Product Type: Moisturizing Skin Cream; Container Type: Dispenser Refill; Formula Type: Lotion Emollients; Fits Dispenser: Dial ™ Eco Smart ™ Amenity Dispensers; Scent: Fragrance Free; Fits Dispenser: Dial ™ Eco Smart ™ Amenit
• 3/4″ Screw 3/4″ OAL 3/4″ ID x 1-1/2″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Flexible Coupling: Sinter Carbon Steel, 5/16″ Pipe, 0.81″ OAL
• Plastic Sheet: Garolite, 1/16″ Thick, 6″ Long, Green, 37,000 psi Tensile Strength Rockwell M-110
• Swivel Top Plate Caster: Polyolefin, 4" Wheel Dia, 1-3/8" Wheel Width, 300 lb Capacity, 5-3/8" OAH
• Worm Gear Clamps; Clamp Type: Fuel Injection Hose; Minimum Diameter (mm): 14.00; Minimum Diameter (Fractional Inch): 9/16; Minimum Diameter (Decimal Inch): 0.5625; Maximum Diameter (Decimal Inch): 0.6250; Maximum Diameter (mm): 16.00; Maximum Diameter (In
• Paints; 1GAL WHT GLOSS FINISHING ENAMEL
• Indexable Drill Insert: 32 BK8425, Carbide TiAlN & TiN Finish, Square
• Dock Levelers; Edge-of-dock: No; Load Capacity: 35000; Overall Width: 72; Service Height Range: 12-12 in; Phase: Three; Number Of Bumpers: 2; Bumper Length: 4.5 in
• Indexable Drill Insert: 34 BK8425, Carbide TiAlN & TiN Finish, Square
• Bibs & Cape Sleeves; Garment Style: Sleeves; Material: Cotton Sateen; Flame Resistance: Yes; Material Weight (oz.): 9 oz; Closure Type: Elastic; Size: Medium; Standards: ASTM D6413; Length (Inch): 18 in; Features: 3/4″ Elastic Ends; Material Weight: 9 oz;
• Safety Glass: Scratch-Resistant, Polycarbonate, Blue Mirror Lenses, Frameless, UV Protection Gunmetal Frame, Single
• Taper Length Drill Bit: 0.0315″ Dia, 118 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 667
• Taper Length Drill Bit: 0.0335″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Dock Levelers; Edge-of-dock: No; Load Capacity: 30000; Overall Width: 72; Service Height Range: 12-12 in; Phase: Three; Number Of Bumpers: 2; Bumper Length: 4.5 in
• Taper Length Drill Bit: 0.0374″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Indexable Drill Insert: 21 BK7710, Carbide TiB2 Finish, 1/2″ Inscribed Circle, Square
• Indexable Drill Insert: 01 BK7615, Carbide TiCN & Al2O3 Finish, 1/2″ Inscribed Circle, Square
• Indexable Drill Insert: 13 BK8425, Carbide TiAlN & TiN Finish, 1/2″ Inscribed Circle, Square
• Indexable Drill Insert: 03 BK8430, Carbide TiAIN & TiN Finish, 1/2″ Inscribed Circle, Square
• Indexable Drill Insert: 01 BK6115, Carbide TiCN, TiN & Al2O3 Finish, 1/2″ Inscribed Circle, Square
• Blow Gun Accessories; Accessory Type: Air Gun Extension; Material: Stainless Steel; For Use With: GA44 Air Gun; Thread Standard: NPT; Thread Size: 1/4 in; Standards: OSHA; Additional Information: Star-Tip Safety Extension Tube; Length (Decimal Inch - 4 De
• Indexable Drill Insert: 01 BK6420, Carbide TiCN, Al2O3 & TiN Finish, 1/2″ Inscribed Circle, Square
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8609; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, 1/2″ Inscribed Circle, Square
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9495; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Taper Length Drill Bit: 0.1004″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Indexable Drill Insert: 13 BK7935, Carbide AlTiN Finish, 1/2″ Inscribed Circle, Square
• Micro Drill Bit: 0.011″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.5″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 302
• Taper Length Drill Bit: 0.1083″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• GZ305.0100.080.AA.04.R Carbide Cutoff Insert Uncoated, 0° Neutral Lead Angle, RH Insert, 1mm Cutting Width, Series 25650
• Indexable Drill Insert: P28428E67 WSP45S, Carbide Coated, 96 ° Square
• GZ305.0150.080.AA.04.R Carbide Cutoff Insert Uncoated, 0° Neutral Lead Angle, RH Insert, 1.5mm Cutting Width, Series 25650
• Indexable Drill Insert: P28428E67 WSP45S, Carbide Coated, 96 ° Square
• Indexable Drill Insert: FBH09G AH725, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBH09G AH8015, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBH11HF AH725, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBH09HF AH725, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBH11G AH8015, Carbide Coated, 80 ° Parallelogram
• Indexable Drill Insert: FBH09G AH725, Carbide Coated, 80 ° Parallelogram
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8832; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Cut-Off Inserts; Insert Style: TK; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 4.10; Insert Holding Method: Self Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 8; Relief
• Plastic Bar: Acetal, 1/32″ Thick, White
• Plastic Bar: Polytetrafluoroethylene, 1/16″ Thick, White
• Fiber Disc: 5" Disc Dia, Quick Change TN, 36 Grit, Premium Ceramic Alumina
• Deep Groove Ball Bearing: 922 lb Static Load
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 12' Long x 12' Wide, 5 mil Polyethylene, Rectangle
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, Trigon
• Taper Length Drill Bit: 0.1094″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Indexable Drill Insert: TPMX14B AH8015, Carbide Coated, 60 ° Triangle
• Wire Post: Use with Shelving
• Cut & Puncture Resistant Gloves
• Facepiece Replacement Lens: Polycarbonate, Clear
• Taper Length Drill Bit: 0.0550″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Strip: Silicone Rubber, 3/8″ Wide, 120″ Long, Red Durometer 40, Plain Backing
• Taper Length Drill Bit: 0.0595″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• FlexC 42 Quick-Change Collet 23mm Round Serrated
• Corner Radius End Mill: 1" Dia, 1-1/4" LOC, 3.05 mm Radius, 8 Flute, Solid Carbide
• 1-8 7-1/2″ OAL Equal Double Threaded Stud Carbon Steel, 2-1/2″ Equal Thread Length
• Abrasive Belt: 1/2" Wide, 18" OAL, 50 Grit, Aluminum Oxide
• Cooling Bandana: Size Universal, Black, Red & Gray Camouflage, Cotton
• Cooling Bandana: Size Universal, Black None, Cotton
• Class X Plus Pin Gage: 0.3127″ Dia, 2-1/2″ Long Micro Finish
• Class X Plus Pin Gage: 0.3126″ Dia, 2-1/2″ Long Micro Finish
• Taper Length Drill Bit: 0.1024″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Class X Plus Pin Gage: 0.3124″ Dia, 2-1/2″ Long Micro Finish
• Class X Plus Pin Gage: 0.3123″ Dia, 2-1/2″ Long Micro Finish
• Micro Drill Bit: 0.0157″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0453″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Ball Grip Quick-Release Pin: Ring Handle, 3/4″ Pin Dia, 3″ Usable Length 4.99″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.2138; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Micro Drill Bit: 0.0492″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0531″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0394″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Woodruff Keyseat Cutter: 1/4" Cut Dia, 1/16" Cut Width, 1/4" Shank Dia, Straight Tooth
• Plastic Bar: Polyvinylchloride, 1/8″ Thick, Dark Gray
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9812; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Black 90 ° Elbow: 3/4″, 250 psi, Threaded Cast Iron, Black Finish, Class 250
• Micro Drill Bit: 0.0571″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0433″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0177″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0512″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0217″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0551″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0256″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0472″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9813; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Micro Drill Bit: 0.0315″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0236″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9986; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Micro Drill Bit: 0.0276″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8614; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Micro Drill Bit: 0.0335″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0295″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Flexible Coupling: Aluminum hubs with Stainless Steel Discs, 3/8" Pipe, 1.81" OAL
• Micro Drill Bit: 0.0374″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0413″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0197″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0354″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Taper Length Drill Bit: 0.1181″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Hydraulic Filter Element: 10 µ
• Arc Welding Accessories; For Use With: Electrodes
• Arc Welding Accessories; For Use With: Electrodes
• Traffic Barricades; Type: Type I & II; Barricade Height (Inch): 12; Material: Plastic; Barricade Width (Inch): 24; Reflective: Yes; Compliance: None; Color: White; Additional Information: Reflective Strip Direction: Right Strip On One Side Of The Board; R
• Traffic Barricades; Type: Type I & II; Barricade Height (Inch): 12; Material: Plastic; Barricade Width (Inch): 24; Reflective: Yes; Compliance: None; Color: White; Additional Information: Reflective: Engineer Grade Striped Sheeting; Reflective Strip Direc
• Micro Drill Bit: 3/8" (0.3750") Dia, 9.53 mm Dia, (0.3750"), 130 deg, Solid Carbide
• Shaft Collar: Shaft, 1-1/2" OD, Aluminum
• Time Cards & Time Clock Accessories; For Use With: Acroprint Time Recorder - Manual or Automatic Time Recorders
• Plastic Bar: Polytetrafluoroethylene, 1/16″ Thick, White
• 5/16″ Pin Diam, 2-1/4″ Pin Length, #10-32 Thread, Spiral Groove Dowel Pin Alloy Steel, -0.0001 to 0.0001″ Diam Tolerance, 1 Beveled & 1 Threaded End
• #4 Screw 2″ OAL 0.115″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Ball Grip Quick-Release Pin: Ring Handle, 3/16″ Pin Dia, 1-1/4″ Usable Length 2.74″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 1″ Usable Length 2.49″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Neutral Floor Cleaner: Pouch, Use On Floors Water Based
• Ball End Mill: 0.0450" Dia, 0.1350" LOC, 4 Flute, Solid Carbide
• Rotary & Multi-Tool Accessories; Accessory Type: Sanding pad; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 3.5 in; Material: None; Application: Wood, Paint, and Varnish; Includes: (1) Imperial Blades One Fit
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.2356; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Sheet: EPDM Rubber, 18″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Hex Head Cap Screw: 7/8-9 x 5″, Grade L9 Steel, Zinc Yellow Dichromate Finish Partially Threaded
• Timing Belt Pulleys; Pulley Type: Hub & Flanges; Number of Teeth: 24; Outside Diameter (Decimal Inch): 1.4590; Belt Width: 9.0 mm; 9.0 in; 9.0 cm; Material: Aluminum; Pitch Diameter: 1.504 mm; 1.504 in; Face Width: 0.54 in; 0.54 mm; Flange Diameter: 1.625
• Timing Belt Pulleys; Pulley Type: Hub w/No Flanges; Number of Teeth: 19; Outside Diameter (Decimal Inch): 1.1460; Belt Width: 9.0 mm; 9.0 in; 9.0 cm; Material: Aluminum; Pitch Diameter: 1.191 in; 1.191 mm; Face Width: 0.546 in; 0.546 mm; Minimum Order Qua