Products

• Chucking Reamer: 0.498″ Dia, 8″ OAL, 2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Micro Drill Bit: 2.38 mm Dia, (0.0937"), 140 deg, Solid Carbide
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 20.00; Groove Width (mm): 2.00; Shank Diameter (mm): 20.0000; Overall Length (mm): 20.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 1.900;
• Chucking Reamer: 0.485″ Dia, 8″ OAL, 2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• FlexC 80 Quick-Change Collet 2-13/16" Round Smooth
• Chucking Reamer: 0.407″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Chucking Reamer: 0.401″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6722; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Chucking Reamer: 0.3945″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Chucking Reamer: 0.396″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• #8-32, 1-7/8″ OAL, 3/8″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/2″ Body Length, 3/8″ Thread Length, 7/16″ Thread Depth, Grade 12L14, Zinc-Plated
• Phillips Screwdriver Insert Bit: #4 Point, 5/16" Drive, 1-1/4" OAL
• Hook & Loop; Shape: Roll; Color: White; Roll Length (Feet): 15.00; Component Type: Hook & Loop
• Press Fit Headless Drill Bushing: HM, 9.6″ ID Steel
• Corner Chamfer End Mill: 16.00 mm Dia, 24.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Press Fit Headless Drill Bushing: HM, 9.5″ ID Steel
• Plastic Bar: Polypropylene, 1-1/2″ Thick, Semi-Clear White
• Press Fit Headless Drill Bushing: HM, 7.7″ ID Steel
• Press Fit Headless Drill Bushing: HM, 8.7″ ID Steel
• Press Fit Headless Drill Bushing: HM, 7″ ID Steel
• Press Fit Headless Drill Bushing: HM, 6.25″ ID Steel
• Spade Drill Insert: 17.5 mm Dia, Series 0, Solid Carbide AM200 Finish, Series 0
• Extra Length Drill Bit: 0.1457″ Dia, 130 °, Cobalt Bright Finish, 4.528″ Flute Length, 6.496″ OAL, Parabolic Flute, Straight-Cylindrical Shank, Series 618
• Extra Length Drill Bit: 0.1417″ Dia, 130 °, Cobalt Bright Finish, 4.528″ Flute Length, 6.496″ OAL, Parabolic Flute, Straight-Cylindrical Shank, Series 618
• DVD-R Disc: Use with Leading Laser Printers
• Masking Tape: 60 yd Long, 5 mil Thick, Green Polypropylene, Rubber Adhesive, 13 lb/in Tensile Strength
• Die Drill Bit: 0.2362″ Dia, 140 °, Solid Carbide Bright Finish, 1-5/16″ Flute, 2-7/16″ OAL, Series 470
• Press Fit Headless Drill Bushing: HM, 5.8″ ID Steel
• Cut & Abrasion-Resistant Gloves: Size L, ANSI Cut A3, Kevlar Yellow & Gray, Palm Coated, ANSI Abrasion 5
• Press Fit Headless Drill Bushing: HM, 5.75″ ID Steel
• 18″ Plastic Ergonomic Snow Scoop 42″ Ergonomic Plastic Handle
• Corner Chamfer End Mill: 16.00 mm Dia, 24.00 mm LOC, 5 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Power Generator Accessories; Generator Accessory Type: Strap; For Use With: M18 ™ CARRY-ON ™ 3600W/1800W Power Supply; Accessory Type: Strap
• Press Fit Headless Drill Bushing: HM, 5.25″ ID Steel
• Black 90 ° Street Elbow: 1-1/2″ Black Finish
• Plastic Bar: Nylon 6/6, 3/4″ Thick, Off-White
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 3/4″ Usable Length 2.24″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• TIG Torch Parts & Accessories; Type: Cable Cover; Length (Feet): 10.0; For Use With: All; For Use With: All; PSC Code: 3438; For Use With: All; Type: Cable Cover
• Corner Chamfer End Mill: 18.00 mm Dia, 27.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 3/4″ Usable Length 2.24″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Compression Spring: 2.291″ OD, 4″ Free Length 0.225″ Wire Dia, 119.052 lb Max Load, 71.506 lb/in Spring Rate, Stainless Steel
• TKF16R200-T PR1225 Carbide Cutoff Insert Megacoat Finish, 0° Neutral Lead Angle, RH Insert, 2mm Cutting Width, 0.08mm Corner Radius, Series KTKF
• Countersink: 60 deg Included Angle, 0 Flute, Cobalt Steel, Right Hand
• Compression Spring: 2.35″ OD, 4″ Free Length 0.225″ Wire Dia, 116.218 lb Max Load, 68.487 lb/in Spring Rate, Stainless Steel
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Left Hand; Lead Angle: 0; Relief Angl
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 2.00; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Left Hand; Lead Angle: 0; Relief Angl
• Milling Insert: LNHU080404-F57T WSP45G, WSP45G, Solid Carbide N/A Finish,
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 16; Relief
• 3/8 Countersink and Deburring Tool 82 Degree Cleveland 3001 Bright Cobalt
• Milling Insert: WHH15, Solid Carbide N/A Finish,
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Right Hand; Lead Angle: 0; Relief Ang
• Compression Spring: 2.468″ OD, 4″ Free Length 0.225″ Wire Dia, 110.933 lb Max Load, 63.167 lb/in Spring Rate, Stainless Steel
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Right Hand; Lead Angle: 0; Relief Ang
• Grooving Insert: TDTT K10, Solid Carbide Uncoated, Neutral, 0.236″ Cutting Width, Series TDT-E (Full Radius)
• Plastic Bar: Nylon 6/6, 1″ Thick, Off-White
• Garden Hose Spray Nozzles; Type: Pre-Set Watering Wand; Style: Thumb Control; Material: Plastic; Metal; Color: Red/Gray; Thread Size (Inch): 3/4; Description: Pre-Set Watering Wand with Swivel Connect; Description: Pre-Set Watering Wand with Swivel Connec
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 2.00; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 20; Relief
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 20; Relief
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 2.00; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Right Hand; Lead Angle: 0; Relief Ang
• Compression Spring: 2.585″ OD, 4″ Free Length 0.225″ Wire Dia, 106.141 lb Max Load, 58.671 lb/in Spring Rate, Stainless Steel
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1225; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Left Hand; Lead Angle: 16; Relief
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 2.00; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Right Hand; Lead Angle: 0; Relief Ang
• Compression Spring: 2.468″ OD, 6.5″ Free Length 0.192″ Wire Dia, 73.118 lb Max Load, 21.38 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.586″ OD, 3.25″ Free Length 219.119 lb Max Load, 303.486 lb/in Spring Rate, Stainless Steel
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1225; Cutting Width (mm): 2.00; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Left Hand; Lead Angle: 16; Relief
• Compression Spring: 2.233″ OD, 8″ Free Length 0.177″ Wire Dia, 64.902 lb Max Load, 15.099 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDT-.00E
• Spot Welder Tips; Tip Type: Straight Tip C Nose (Flat); Material: RWMA Class 2 - C18200; Type: Straight Tip C Nose (Flat)
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 2.00; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Left Hand; Lead Angle: 0; Relief Angl
• Grooving Insert: TDITT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDIT-.00E
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 2.00; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Left Hand; Lead Angle: 20; Relief
• Ball Grip Quick-Release Pin: T-Handle, 8 mm Pin Dia, 25 mm Usable Length 57.3 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Grooving Insert: TDITT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDIT-.00E
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Left Hand; Lead Angle: 0; Relief Angl
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDT-.00E
• Ball Grip Quick-Release Pin: T-Handle, 6 mm Pin Dia, 30 mm Usable Length 62.3 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Push-to-Connect Tube Fitting: 1/4″ Thread Stainless Steel, 290 psi
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Neutral; Insert Hand: Right Hand; Lead Angle: 0; Relief Ang
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDT-.00E
• Grooving Insert: TDITT TT7220, Solid Carbide TiCN Finish, Neutral, 0.157″ Cutting Width, Series TDIT-.00E
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1725; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 16; Relief
• Grooving Insert: TDITT TT7220, Solid Carbide TiCN Finish, Neutral, 0.157″ Cutting Width, Series TDIT-.00E
• Cut-Off Inserts; Insert Style: TKF; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: PR1225; Cutting Width (mm): 1.50; Insert Holding Method: Screw; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 16; Relief
• Grooving Insert: TDTT TT8020, Solid Carbide TiCN Finish, Neutral, 0.157″ Cutting Width, Series TDT-.00E
• #4-40, 0.624″ OAL, 1/4″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 0.437″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 6/6, Uncoated
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.157″ Cutting Width, Series TDT-.00E
• Cable Tools & Kits; Number of Pieces: 1.0; Number Of Pieces: 1.0; For Use With: Can Wrench
• Corner Chamfer End Mill: 18.00 mm Dia, 27.00 mm LOC, 5 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDT-.00E
• Plastic Sheet: Acetal, 1/16″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Ball End Mill: 2.00 mm Dia, 1.50 mm LOC, 2 Flute, Solid Carbide
• Abrasive Belt: 16 Grit, Aluminum Oxide Coated
• Grooving Insert: TDTT TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.157″ Cutting Width, Series TDT-.00E
• Hex Head Cap Screw: 3/8-16 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated
• Ball End Mill: 4.00 mm Dia, 2.50 mm LOC, 2 Flute, Solid Carbide
• Compression Spring: 2.233″ OD, 5″ Free Length 0.207″ Wire Dia, 98.081 lb Max Load, 42.959 lb/in Spring Rate, Stainless Steel
• Masking Tape: 60 yd Long, 7.6 mil Thick, Tan Crepe Paper, Rubber Adhesive, 28 lb/in Tensile Strength
• Grooving Insert: DGLGL AH7025, Solid Carbide TiAlN Finish, Neutral, 0.236″ Cutting Width, Series DGL
• Ball End Mill: 5.00 mm Dia, 3.00 mm LOC, 2 Flute, Solid Carbide
• Ball Grip Quick-Release Pin: Button Handle, 6 mm Pin Dia, 10 mm Usable Length 32.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Compression Spring: 1.998″ OD, 3″ Free Length 177.773 lb Max Load, 196.138 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 6.00 mm Dia, 3.50 mm LOC, 2 Flute, Solid Carbide
• Compression Spring: 1.41″ OD, 5.75″ Free Length 0.192″ Wire Dia, 123.786 lb Max Load, 66.164 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 8.5″ Free Length 0.162″ Wire Dia, 82.615 lb Max Load, 24.071 lb/in Spring Rate, Stainless Steel
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 3.00; Overall Length (mm): 3.00; Material: Foam; Plastic; Finish/Coating: Plastic; Maximum Load Capacity: 16.00; Minimum Order Quantity: Foam; Plastic; Material: Foam; Plastic;
• Pipe Adapter: 1/8″ Fitting, 316 Stainless Steel FNPT x MNPT, 6,100 psi
• Turning Insert: SNGN453 FX105, Ceramic Uncoated Finish, Neutral, 0.5000″ Long, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, N/A Square, Series SNGN
• Black 45 ° Elbow: 1″, Threaded Steel, Black Finish, Class 3000, ANSI/ASME B1.20.1, ANSI/ASME B16.11-MSS SP-83 & ASTM A105
• Lever Locksets; Lockset Type: Classroom; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Conventional; Material: Metal; Door Thickness: 1-3/4 to 2; Finish: Satin Chrome
• Silicone Tube: 1-1/2″ OD, 2' Length 40 Max psi, Clear
• Compression Spring: 1.116″ OD, 7.5″ Free Length 0.162″ Wire Dia, 98.402 lb Max Load, 41.279 lb/in Spring Rate, Stainless Steel
• Milling Insert: XAHT 060525SR-M50 CTCP230, CTCP230, Solid Carbide N/A Finish, 1.0000″ OAW
• Milling Insert: XAHT 060525SR-M50 CTCK215, CTCK215, Solid Carbide N/A Finish,
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0926; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards,
• Compression Spring: 0.999″ OD, 6.5″ Free Length 0.177″ Wire Dia, 136.296 lb Max Load, 94.527 lb/in Spring Rate, Stainless Steel
• Corner Chamfer End Mill: 20.00 mm Dia, 30.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
• Compression Spring: 1.293″ OD, 4.25″ Free Length 0.225″ Wire Dia, 200.667 lb Max Load, 232.053 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.41″ OD, 8.5″ Free Length 0.162″ Wire Dia, 79.395 lb Max Load, 22.156 lb/in Spring Rate, Stainless Steel
• 16IR6STACME IC908 Carbide Laydown Threading Insert TiAlN Finish, RH Internal Stub Acme Thread, 6 TPI, 3/8″ Inscribed Circle, 0.143″ Thick
• Compression Spring: 1.586″ OD, 4.75″ Free Length 0.207″ Wire Dia, 135.087 lb Max Load, 86.213 lb/in Spring Rate, Stainless Steel
• Die Drill Bit: 0.1570″ Dia, 140 °, Solid Carbide Uncoated, 1-1/16″ Flute, 2-1/8″ OAL, Series 106
• Submersible Pump Accessories; Type: Motor Plate; For Use With: LTA; For Use With: LTA; Type: Motor Plate; For Use With: LTA
• Flap Disc: 4-1/2″ Dia, 5/8-11 Hole, Aluminum Oxide, Type 27 Non-Woven, Coarse Grade, Fiberglass-Backed, 13,300 RPM
• Compression Spring: 1.88″ OD, 3″ Free Length 187.997 lb Max Load, 223.487 lb/in Spring Rate, Stainless Steel
• Hex Key: 8 mm Hex, T-Handle Arm 210 mm OAL, 61CrSiV5 Vanadium Steel
• Compression Spring: 0.823″ OD, 9.5″ Free Length 0.148″ Wire Dia, 101.794 lb Max Load, 46.433 lb/in Spring Rate, Stainless Steel
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.113MC
• Compression Spring: 1.821″ OD, 4.75″ Free Length 0.207″ Wire Dia, 118.87 lb Max Load, 65.158 lb/in Spring Rate, Stainless Steel
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 6.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 6.0000; Overall Length (mm): 47.0000; Finish Coating: TiCN; Serie
• Ball Grip Quick-Release Pin: Button Handle, 6 mm Pin Dia, 100 mm Usable Length 122.6 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 6.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 6.0000; Overall Length (mm): 42.0000; Finish Coating: TiCN; Serie
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 46.0000; Finish Coating: TiCN; Series
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 6.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 6.0000; Overall Length (mm): 47.0000; Finish Coating: TiCN; Series
• Plastic Bar: Nylon 6/6, 3/4″ Thick, Off-White
• 1/4″ Pin Diam, 2-1/2″ Pin Length, #8-32 Thread, Spiral Groove Dowel Pin Alloy Steel, -0.0001 to 0.0001″ Diam Tolerance, 1 Beveled & 1 Threaded End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 41.0000; Finish Coating: TiCN; Serie
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 12' Long x 9' Wide, 12 mil Polyethylene, Rectangle
• Die Drill Bit: 1/32″ Dia, 135 °, Solid Carbide Bright Finish, 3/16″ Flute Length, 1-1/2″ OAL
• Pullers, Extractors & Specialty Wrenches; Type: Control Cabinet Key; Capacity: Triangle: 9mm; Two-Way Key Bit: 3-5mm; Square: 5, 6, 8mm; Overall Length (Inch): 4; Capacity: Triangle: 9mm; Two-Way Key Bit: 3-5mm; Square: 5, 6, 8mm; Drive Size (Inch): 1/4;
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 46.0000; Finish Coating: TiCN; Serie
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7262; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 1/2″ Inlet, ASME Safety Valve MNPT Ends, 50 Max psi, Brass
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Square End Mill: 1/8'' Dia, 1/8'' LOC, 3/16'' Shank Dia, 2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.12'' Dia, 0.18'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• 600 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 1/8″ Wide x 4″ Long x 1/8″ Thick
• Die Drill Bit: 0.0320″ Dia, 135 °, Solid Carbide Uncoated, 7/32″ Flute, 1-1/2″ OAL, Series 200
• Deep Groove Ball Bearing: 80 mm OD 3,709 lb Static Load
• Corner Chamfer End Mill: 20.00 mm Dia, 30.00 mm LOC, 5 Flute, 0.30 mm Chamfer Width, Solid Carbide
• Chucking Reamer: 0.1142″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Deep Groove Ball Bearing: 80 mm OD 4,991 lb Static Load
• Deep Groove Ball Bearing: 80 mm OD 3,417 lb Static Load
• M6x1.0 Coarse 10mm Long Hex Thread Cutting Screw 12L14 Steel, Hex Washer Head, Self Drilling Point, Zinc-Plated
• Tank Flanges; Overall Height (Inch): 11/16
• Corner Chamfer End Mill: 3.00 mm Dia, 8.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Cut-Resistant Gloves: Size S, ANSI Cut A9, NeoFoam, PolyKor Green & Black, Palm & Fingers Coated
• Hex Head Cap Screw: 5/16-18 x 1″, Grade 5 Steel, Uncoated Fully Threaded, ASME B18.2.1
• Brutus TIG Welding Rod: 1/16" Dia, For Welding All Steels
• Cut-Resistant Gloves: Size 2XL, ANSI Cut A9, NeoFoam, PolyKor Green & Black, Palm & Fingers Coated
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T45; Blade Length (mm): 175.0000; Overall Length (mm): 213.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T45; Handle Type: T-Handle; Additional
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.4220; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Cut-Resistant Gloves: Size 2XL, ANSI Cut A9, Polyurethane, HPPE Black & Yellow, 10″ OAL, Palm & Fingertips Coated, Coretex Lined, HPPE Back, Polyurethane Grip
• Collet Chuck: 0.1080 to 0.6300" Capacity, Slim Chuck Collet
• ER: ER32 2″ OAL, 1″ Overall Diam
• Slotting & Profile Milling Tip Insert: XSE550E25250D1CZ4 SIRA, Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Packaging Tape: 1″ Wide, 60 yd Long, 6 mil Thick, Kraft Kraft Paper, Pressure Sensitive Rubber Adhesive, 33 lb/in Tensile Strength
• Grooving Tool: Internal Solid Carbide
• Turning Insert: CCET32.50.5RSR HTI10, Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• #8 Screw 1-1/8″ OAL 0.166″ ID x 5/16″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Grooving Tool: Internal Solid Carbide
• Hose I.D. x MNPTF End Connection Brass Truck Valve 2-3/4″ OAL
• Grooving Tool: Internal Solid Carbide
• Lever Locksets; Lockset Type: Entrance; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Conventional; Material: Metal; Door Thickness: 1-3/4; Finish: Satin Chrome
• Stucco Tape: 48 mm Wide, 60 yd Long, 7.5 mil Thick, Red Hot Melt Synthetic Rubber Resin, Hot Melt Synthetic Rubber Adhesive, 22 lb/in Tensile Strength
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Safety Green; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Safety Green; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Black; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Black; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Yellow; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Yellow; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Blue; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Blue; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Safety Orange; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Orange; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: White; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: White; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Red; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Red; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Hook & Loop Discs; Disc Diameter (Decimal Inch): 5; Grade: Coarse; Ultra Fine; Medium; Grit: 60; Abrasive Material: Ceramic Blend; Disc Color: Red; Package Quantity: 50; Grit: 60; Grit: 60; Package Quantity: 50
• Corner Chamfer End Mill: 4.00 mm Dia, 11.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Corner Chamfer End Mill: 6.00 mm Dia, 13.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6463; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Micro Drill Bit: 0.0890" Dia, 140 deg, Solid Carbide
• Ball Grip Quick-Release Pin: Ring Handle, 5/16″ Pin Dia, 3″ Usable Length 4.49″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Circuit Continuity & Voltage Testers; Tester Type: Voltage Tester; Minimum Voltage: 0 VAC/VDC; Maximum Voltage: 220V; Display Type: Neon Lamps, Digital; Audible Alert: No
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0764; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Dish Detergent; Form: Powder; Container Type: Box; Container Size (oz.): 75.00; Scent: Fresh; For Use With: Powder
• Screw Extractor & Drill: 2 Pc Includes Jobber Drill & Screw Extractor
• Corner Chamfer End Mill: 5.00 mm Dia, 13.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6019; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill: 3/16" Dia, 3/8" LOC, 0.0150" Radius, 4 Flute, Solid Carbide
• FlexC 80 Quick-Change Collet 1-19/64" Round Smooth
• Turning Insert: CCMT21.51MS MP9025, Carbide
• Pipe Reducing Adapter: 3/8 x 1/8″ Fitting, 316 Stainless Steel FNPT x MNPT, Threaded, ANSI/ASME B31.1, ANSI/ASME B31.3 & ANSI/ASME B1.20.1, 4,900 psi
• Pullers, Extractors & Specialty Wrenches; Product Type: Valve Wheel Hook; Overall Length (Decimal Inch): 25.5906
• Stainless Steel Pipe Nipple: 1-1/2″ Pipe, Grade 316 Schedule 80
• FlexC 80 Quick-Change Collet 1-17/64" Round Smooth
• Neutrazen Metered Dutch Apple Concentrated Dry Spray Odor Counteractant for Automatic Dispensers
• Compression Tube:
• Metered Melon Concentrated Dry Spray Odor Counteractant for Automatic Dispensers
• Compression Tube:
• Metered Citrus Peel Concentrated Dry Spray Odor Counteractant for Automatic Dispensers
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T20; Blade Length (mm): 125.0000; Overall Length (mm): 152.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T20; Handle Type: T-Handle; Additional
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T15; Blade Length (mm): 125.0000; Overall Length (mm): 152.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T15; Handle Type: T-Handle; Additional
• Magnifying Safety Glasses: +2, Clear Lenses, Anti-Fog & Scratch Resistant, ANSI Z87.1 UV Protection, Gray Frames, Half-Framed
• Timing Belt Pulleys; Pulley Type: Hub & Flanges; Number of Teeth: 19; Outside Diameter (Decimal Inch): 1.1460; Belt Width: 9.0 mm; 9.0 in; 9.0 cm; Material: Aluminum; Pitch Diameter: 1.191 in; 1.191 mm; Face Width: 0.54 in; 0.54 mm; Flange Diameter: 1.313
• Milling Insert: SNMU130508EN-SM PR1810, Carbide
• Milling Insert: BDMT110302ER-JS PR1825, Carbide
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: SpeedLoc; Outside Diameter (Decimal Inch): 1.127 in; Inside Diameter (mm): 20 mm; Plate Thickness Tolerance: ™0.0050 in; Plate Thickness Compatibility: 1 in; Plate Thickness Tolerance (
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00002/-0.00002; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.2581; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards,
• Plastic Sheet: Cast Acrylic, 1/4″ Thick, Red Rockwell M-95
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, White Rockwell M-95
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, Black Rockwell M-95
• Deep Groove Ball Bearing: 30 mm OD 450 lb Static Load
• Ball Grip Quick-Release Pin: Ring Handle, 3/16″ Pin Dia, 3/4″ Usable Length 2.24″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 1/2″ Usable Length 1.99″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Compression Tube Sleeve: Compression x Compression Zinc-Plated Steel
• Push Broom: 23.6″ Wide, Polypropylene Bristle Plastic Block, European Threaded Handle Connection
• Push Broom: 23.6″ Wide, Polypropylene Bristle Plastic Block, European Threaded Handle Connection
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 1/2″ Usable Length 1.99″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Round Linear Shafting; Shaft Type: Standard; Diameter (mm): 9.5300; Diameter (Decimal Inch): 0.3750; Diameter (Inch, Fraction): 3/8; Shaft Diameter: 9.530; Shaft Diameter: 0.3750; Material: Steel; Length (Inch): 12; Minimum Diameter Tolerance: 9.4996 mm
• Traffic Barrels, Delineators & Posts; Type: Open Top Delineator; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 4-5/8; Additional Information: Stripe Width: 4 in; Stripe Color: White; Series: 6842; Post Diameter: 4 in; Sheeting G
• #4 Screw 11/16″ OAL 0.115″ ID x 3/16″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Woodruff Keyseat Cutter: 24.00 mm Cut Dia, 2.00 mm Cut Width, 12.70 mm Shank Dia, Straight Tooth
• Automotive Switches; Switch Type: Dimmer Switch; Number Of Connections: 2; Contact Form: Blade; Sequence: Hi-Low; Amperage: 10; Voltage: 12; Color: Silver; Actuator Type: Push Button
• Corner Chamfer End Mill: 8.00 mm Dia, 19.00 mm LOC, 4 Flute, 0.12 mm Chamfer Width, Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8739; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0280; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Linear Motion Systems; Type: Multi-Roller Guide Block; Overall Width (mm): 18.1000; Overall Length (mm): 43.0000; Height (mm): 6.0000
• Rigid & Swivel Caster Wheel: Polyurethane, 5" Dia, 1-1/4" Wide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.8238; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.8105; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 1/2″ Inlet, ASME Safety Valve MNPT Ends, 150 Max psi, Brass
• 1/2″ Inlet, ASME Safety Valve MNPT Ends, 125 Max psi, Brass
• 1/2″ Inlet, ASME Safety Valve MNPT Ends, 225 Max psi, Brass