Products

• Wet & Dry Cut Saw Blade: 4-1/2″ Dia, 7/8″ Arbor Hole, 0.08″ Kerf Width, 1 Teeth High Speed Steel Teeth, Use on Ceramic Tile, Standard Arbor
• Plastic Bar: Polypropylene, 1″ Thick, Semi-Clear White
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 3.000; Number of Walls: 0
• Plastic Bar: Acetal, 3/32″ Thick, Black Rockwell M-90
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Temporary Structures; Type: Platform; Width (Feet): 1.50; Length (Feet): 3.000; Number of Walls: 0; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 54; Post Consumer Recycled Conten
• Plastic Bar: Acetal, 1/8″ Thick, Black Rockwell M-90
• 18" Dia, 60 Grit, Ceramic Blend
• Plastic Bar: Acetal, 1/8″ Thick, White
• Abrasive Belt: 1/2" Wide, 18" OAL, 180 Grit, Aluminum Oxide
• Plastic Bar: Acetal, 1/8″ Thick, White
• Milling Machine Power Feed: 140 in/lb Max Peak Torque, 100 in/lb Max Continuous Torque 37″ Max Feed Rate per min, 37″ Traversing Speed per min
• Power Pallet Truck: 4,400 lb Capacity, 27″ OAW, 27″ Forks 3-3/8″ Min Lift Height, 48″ Fork Length x 27″ Fork Width, 27″ Overall Width
• Indexable Broaching Accessories; Accessory Type: Ball-Bearing Point Set Screw; For Use With: Lathe Without Y-Axis; Additional Information: M14X2
• Black Hex Bushing: 2 x 1″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Traffic Barrels, Delineators & Posts; Type: Traffic Drum; Material: HDPE; Reflective: No; Base Needed: Yes; Height (Inch): 39.7; Width (Inch): 23-1/2; Additional Information: Sub Brand: Commander ™; Rubber Base Sold Separately; Series: 456; Color: Orange;
• Corner Radius End Mill Head: 1/8″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• Black Hex Bushing: 2 x 1-1/4″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Polyethylene Film Tape: 12″ Wide, 25' x 2 mil Thick 2,500 Lb/In Tensile Strength, Acrylic Adhesive
• All-Purpose Cleaner: 144 gal Bottle, Disinfectant Liquid, Lavender & Orchid Essence Scent
• Corner Radius End Mill Head: 1/8″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Single or Multiple Components Within an Access Control System; Material: Steel; Material: Steel; For Use With: Single or Multiple Components Within an Access Control System; Type: Power Sup
• All-Purpose Cleaner: 144 gal Bottle, Disinfectant Liquid, Sparkling Lemon & Sunflower Essence Scent
• Screw Machine Length Drill Bit: [ATT_DrillBitSizeInch_NUM] 140 &deg N/A Solid Carbide TiAlSiN Finish, Spiral Flute, Series DC175-03-A1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0110; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Latches; Type: Bar Latch; Length (mm): 45.00; Width (mm): 40.00; Height (mm): 16.0000; Finish/Coating: Polished; Distance Between Mounting Hole Centers: 30; Series: BLT; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Descripti
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4638; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Impact Socket: 3/4″ Drive 6-Point
• Ring Pipe Thread Gages; Thread Size: 2-11-1/2; Classification: 6 Step; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: ANPT; Additional Information: Specification Met: SAE AS71051; Thread Size (Inch): 2-11-1/2
• Impact Socket: 3/4″ Drive 6-Point
• Deep Groove Ball Bearing: 90 mm OD 4,923 lb Static Load
• Forklift Drum Rotator: 1 Drum, 800 lb Capacity 800 Lb Capacity, For 1 Drum
• Deep Groove Ball Bearing: 90 mm OD 4,923 lb Static Load
• Precision & Specialty Screwdrivers; Tool Type: Precision Bit Screwdriver; Blade Length (mm): 2; Shaft Length: 40 mm; Handle Length: 140 mm; Handle Color: Black; Green; Finish: Chrome-Plated; Body Material: Chrome Alloy Steel; Overall Length (Inch): 5.50;
• Hex Key: 7 mm Hex, Extra Long Arm 197 mm OAL, 59CrV4 Vanadium Steel
• Corner Radius End Mill: 5/16″ Dia, 3/4″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 37 ° Helix, Bright/Uncoated, Corner Radius End, Series 1040
• Hex Key: 8 mm Hex, Extra Long Arm 205 mm OAL, 59CrV4 Vanadium Steel
• 18" Dia, 50 Grit, Ceramic Blend
• Corner Radius End Mill: 5/16″ Dia, 3/4″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 37 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 1010 & Alumigator
• Square End Mill: 5/16'' Dia, 1-1/8'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• 900 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 1/4″ Wide x 4″ Long x 1/4″ Thick
• Square End Mill: 0.105'' Dia, 0.158'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• 600 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 1/4″ Wide x 4″ Long x 1/4″ Thick
• Ring Pipe Thread Gages; Thread Size: 1/2-14; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Handle: 3; Pitch Diameter: 0.7769-0.7718; Set: 2 Pc.; Specification
• 220 Grit Aluminum Oxide Rectangular Polishing Stone Very Fine Grade, 1/4″ Wide x 6″ Long x 1/8″ Thick, Oil Filled
• Square End Mill: 0.07'' Dia, 0.105'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• 800 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 1/4″ Wide x 4″ Long x 1/4″ Thick
• Ring Pipe Thread Gages; Thread Size: 3/8-18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: NPSM; Additional Information: Pitch Diameter: 0.6256-0.6211; Handle: 3; Set: 2 Pc.; Specification
• 120 Grit Aluminum Oxide Rectangular Polishing Stone Fine Grade, 1/4″ Wide x 6″ Long x 1/8″ Thick, Oil Filled
• 140° 3.5433″ Diam 1-1/2″ OAL 2-Flute Solid Carbide Spotting Drill AlTiN Finish, 0.075″ Flute Length, 1/8″ Shank Diam
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/8-18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material:
• Sheet: EPDM Rubber, 18″ Wide, 36″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Taper Length Drill Bit: 0.1354″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: M24x2.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Addi
• Taper Length Drill Bit: 0.1299″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/16-12; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material:
• Hex Head Cap Screw: 9/16-12 x 1″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/16-12; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 4; Material:
• Extra Length Drill Bit: 0.2441″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/16 - 18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Materi
• Push-to-Connect Tube Fitting: 3/8″ Thread Stainless Steel, 290 psi
• Sorbent Pad: Absorbs And Permanently Solidifies Hydrocarbons While Allowing Rainwater To Pass Through Use, 15.9, Red, Yellow, Black & White
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: M24x3.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 4; Addi
• Hand Cleaner: 1 gal Bottle Foam, Blue, Spring Water Scent
• Black Tee: 1/4″, Threaded Steel, Black Finish, Class 3000, ANSI/ASME B1.20.1, ANSI/ASME B16.11-MSS SP-83 & ASTM A105
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/16 - 18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Materi
• Compression Spring: 1.528″ OD, 4.75″ Free Length 0.207″ Wire Dia, 139.769 lb Max Load, 93.502 lb/in Spring Rate, Stainless Steel
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/8-18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 4; Material:
• Milling Insert: LNHU160712R-L55T WSP45G, WSP45G, Solid Carbide N/A Finish,
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 1.82; Overall Length (mm): 1.82; Material: Foam; Projection: 0.5 in; Finish/Coating: Plastic; Minimum Order Quantity: Foam; Material: Foam; Length (Inch): 1.82; Overall Length:
• Polytetrafluroethylene Film Tape: 6″ Wide, 36 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Sheet: Neoprene Rubber, 6″ Wide, 12″ Long, Black Durometer 70, Plain Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9655; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 2.585″ OD, 5″ Free Length 0.207″ Wire Dia, 85.282 lb Max Load, 34.225 lb/in Spring Rate, Stainless Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7244; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 1.351″ OD, 6.75″ Free Length 0.177″ Wire Dia, 104.178 lb Max Load, 43.686 lb/in Spring Rate, Stainless Steel
• Plastic Sheet: Cast Acrylic, 1/4″ Thick, Red Rockwell M-95
• Hex Head Cap Screw: 9/16-12 x 5-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Plastic Bar: Polyvinylchloride, 1/8″ Thick, Dark Gray
• Compression Spring: 1.41″ OD, 6.75″ Free Length 0.177″ Wire Dia, 100.164 lb Max Load, 39.941 lb/in Spring Rate, Stainless Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7595; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Hex Nut: 5/8-11, Grade 9 Steel, Zinc-Plated Clear Chromate Right Hand Thread, 15/16″ Across Flats, ANSI & ASME B18.2.2
• Float Valves; Style: Angle Pattern-Single Seat; Pipe Size: 1/2″; End Connection: MIP; Valve Body Material: Stainless Steel; PVC; GPM @ 50 Psi: 14.00; Float Arm Size: 1/4″ NPT; Style: Angle Pattern-Single Seat
• Grooving Insert: TQISS TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.118″ Cutting Width, Series TQIS 14
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.3329; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• 16 x 40 6FL A BRAND AE-MS-H Multi-flute square type and radius type carbide end mills designed for stable and high-efficiency milling of high-hardness steels.
• Plastic Bar: Acrylonitrile Butadiene Styrene, 1/2″ Thick, Beige Rockwell R-105
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Grooving Insert: TNMC43NG TN60, Cermet TiCN & NbC Finish, Right Hand, 3.18 mm Cutting Width, 5.94 mm Max Depth, Series STVP
• Square End Mill: 25mm Shank Dia, 150mm OAL, 8 Flutes, Solid Carbide Single End, 50 ° Helix, RH Cut, RH Flute
• Lawn Sprinklers; Type: Sprinkler Head; Thread Size: 3/4; Base Style: Elevated; Travelling Sprinkler: No; Spray Pattern: Circular; Description: Black; Adjustable
• Square End Mill: 25mm Shank Dia, 150mm OAL, 8 Flutes, Solid Carbide Single End, 50 ° Helix, RH Cut, RH Flute
• RCMT 16 06 MP-L3 1105 Carbide Turning Insert TiAlN Finish, Neutral, 16mm Inscribed Circle, 8mm Corner Radius, 1/4″ Thick, Round, Series CoroTurn 107
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Turning Insert: RNMG 19 06 00 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3750″ Corner Radius, N/A Series RNMG
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Square End Mill: 1'' Dia, 4'' LOC, 1'' Shank Dia, 7'' OAL, 5 Flutes, Solid Carbide Single End, Duarise Finish, 0 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Turning Insert
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.015″ Radius, 2 Flutes, Solid Carbide 3-3/4″ OAL, 5/8″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Series ALCR
• Taper Length Drill Bit: 0.3680″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Manual Hold-Down Toggle Clamp: Horizontal, 200 lb Capacity, U-Bar, Flanged Base 61 ° Handle Movement, 91 ° Bar Opening, Steel
• Compression Spring: 2.115″ OD, 7.5″ Free Length 0.177″ Wire Dia, 68.369 lb Max Load, 17.511 lb/in Spring Rate, Stainless Steel
• Taper Length Drill Bit: 0.3740″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Corner Radius End Mill: 0.6299″ Dia, 2 Flutes, Solid Carbide Helix, Bright/Uncoated, Corner Radius End, Series ALCR
• Calculators; Type: Desktop; Number Of Displayed Digits: 12; Display Type: LCD; Color: Black; Print Speed: 1 Line per Second; Function: Calculation; Batteries Included: Yes; Display Size: 12mm; Width (Inch): 1.5 in; Width (Decimal Inch): 1.5 in; 1.5000; Le
• Compression Spring: 2.115″ OD, 3.75″ Free Length 0.225″ Wire Dia, 128.373 lb Max Load, 88.59 lb/in Spring Rate, Stainless Steel
• Magnetic Grate Separators & Rods; Magnet Type: Rare Earth (Neodymium); Number of Pieces: 1.000; Overall Length (Inch): 10; Diameter (Inch): 1; Diverter: No; Length (Inch): 10; Material: Stainless Steel; Width (Inch): 1; Shape: Tube; Material Grade: 316; M
• Wall & Dimmer Light Switches; Switch Type: Four Way; Switch Operation: Toggle; Color: Ivory; Color: Ivory; Grade: Industrial; Number of Poles: 1; Amperage: 20 A; Number Of Poles: 1; Amperage: 20 A; 20; Voltage: 120/277 VAC; Includes: Terminal Screws; Stan
• Trim; Trim Type: Lever; For Use With: Panic Device; Material: Stainless Steel; Brass; Finish/Coating: Satin; PSC Code: 5340; Minimum Order Quantity: Stainless Steel; Brass; Material: Stainless Steel; Brass; For Use With: Panic Device; Finish: Satin; Mater
• Compression Spring: 2.174″ OD, 3.75″ Free Length 0.225″ Wire Dia, 125.093 lb Max Load, 84.303 lb/in Spring Rate, Stainless Steel
• Ball Grip Quick-Release Pin: L-Handle, 8 mm Pin Dia, 25 mm Usable Length 57.3 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Turning Insert: POMG643MNW T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/4″ Inscribed Circle, 0.0470″ Corner Radius, 72.0 &deg N/A Pentagon, Series POMG
• Compression Spring: 2.233″ OD, 4.75″ Free Length 0.207″ Wire Dia, 98.081 lb Max Load, 45.436 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4" Dia, 1/2" LOC, 0.0050" Radius, 3 Flute, Solid Carbide
• Ball Grip Quick-Release Pin: L-Handle, 3/16″ Pin Dia, 1/2″ Usable Length 1-3/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: L-Handle, 5 mm Pin Dia, 30 mm Usable Length 62.3 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Ball Grip Quick-Release Pin: L-Handle, 3/16″ Pin Dia, 1″ Usable Length 2-1/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Compression Spring: 1.586″ OD, 6.75″ Free Length 0.177″ Wire Dia, 89.796 lb Max Load, 31.707 lb/in Spring Rate, Stainless Steel
• Boring Bar: 0.1800" Min Bore Dia, 3/4" Max Bore Depth, Right Hand, 3/16" Shank Dia, Micrograin Solid Carbide
• Compression Spring: 2.291″ OD, 4.75″ Free Length 0.207″ Wire Dia, 95.717 lb Max Load, 43.588 lb/in Spring Rate, Stainless Steel
• Side Chip Saw: 8″ Blade Dia, 3/8″ Blade Thickness, 1-1/2″ Arbor Hole Dia, 48 Teeth, High Speed Steel TiN Finish, Staggered Tooth
• Compression Spring: 0.764″ OD, 9.5″ Free Length 0.148″ Wire Dia, 108.365 lb Max Load, 57.306 lb/in Spring Rate, Stainless Steel
• Bookcases; Overall Height: 42; Overall Width: 36; Overall Depth: 18; Material: Steel; Color: Wine Red; Shelf Weight Capacity: 160
• Locking Storage Cabinet: 33″ Wide, 18″ Deep, 66″ High 3 Shelf
• Boring Bars; Boring Bar Type: Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (Decimal Inch): 0.0700; Material: Solid Carbide; Maximum Bore Depth (Decimal Inch): 0.3000; Projection (Decimal Inch): 0.0100
• #6 Stud, 18 to 14 AWG Compatible, Noninsulated, Crimp Connection, Standard Fork Terminal Copper Contacts
• Ball End Mill: 0.50 mm Dia, 0.40 mm LOC, 2 Flute, Solid Carbide
• PVC Tube: 1/8″ ID, 1/4″ OD, 25' Long 20 Max psi, Yellow
• #6-32, 3/4″ OAL, 3/16″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 1/2″ Body Length, 1/4″ Thread Length, 1/4″ Thread Depth, Grade T-3, Uncoated
• Silicone Tube: 3/16″ OD, 10' Length 40 Max psi, Clear
• Jobber Length Drill Bit: 0.9646″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 7.087″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• FlexC 65 Quick-Change Collet 1-9/16" Hex Serrated
• Sheet: EPDM Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Plain Backing
• Jobber Length Drill Bit: 0.9252″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.811″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Stainless Steel Pipe Nipple: 1/2″ Pipe, Grade 316 Schedule 40
• Sheet: Buna-N Rubber, 6″ Wide, 6″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Jobber Length Drill Bit: 0.9055″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.811″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Compression Spring: 2.35″ OD, 4.75″ Free Length 0.207″ Wire Dia, 93.425 lb Max Load, 41.862 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.8858″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.811″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Sheet: Buna-N Rubber, 12″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Jobber Length Drill Bit: 0.8661″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.535″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Kyocera LNGX 120916RTT PR1525 Grade PVD Carbide, 90 Degree Rectangle, Negative Rake Angle, Right-Hand Milling insert for Finishing in (P) Free-Cutting Steel
• Plastic Sheet: Garolite, 1/8″ Thick, 6″ Long, Brown, 10,000 psi Tensile Strength Rockwell M-100
• Jobber Length Drill Bit: 0.8268″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.535″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Kyocera LNGX 120916 PR1525 Grade PVD Carbide, 90 Degree Rectangle, Negative Rake Angle, Neutral Milling insert for Finishing in (P) Free-Cutting Steel
• Jobber Length Drill Bit: 0.8071″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.535″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Compression Spring: 1.41″ OD, 3.25″ Free Length 242.777 lb Max Load, 414.39 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.9843″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 7.087″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series DC160-05-F0
• Compression Spring: 1.821″ OD, 8″ Free Length 0.177″ Wire Dia, 78.843 lb Max Load, 21.257 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.9449″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.811″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Compression Spring: 1.116″ OD, 6″ Free Length 0.177″ Wire Dia, 123.762 lb Max Load, 77.009 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 2.00 mm Dia, 1.60 mm LOC, 3 Flute, Solid Carbide
• Jobber Length Drill Bit: 0.8465″ Dia, 140 °, Solid Carbide TiSiAlCrN, AlTiN Finish, 6.535″ OAL, Right Hand Cut, Whistle Notch Shank, Series DC160-05-F0
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.118″ Cutting Width, Series TDT-.00E
• Carpet & Upholstery Cleaners; Type: Urine Destroyer; Container Size (fl. oz.): 32; Container Type: Spray Bottle; Scent: Citrus; Application: Carpet; Upholstery Cleaner; Additional Information: Form: Liquid, Removes: Coffee Stains, Food Stains, Grease, Uri
• Grooving Insert: GMM3020040MW CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.124″ Cutting Width, Series TDT-.00E
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.124″ Cutting Width, Series TDT-.00E
• Retaining Ring Pliers; Type: Internal; Tip Angle: 0 ™; Body Material: Steel; Handle Material: Non-Slip Plastic; Tether Style: Not Tether Capable; Features: Heavy-Duty; Overstretching Limiter; Bolted Joint; Zero Backlash Operation; Adjustable Stop Screw;
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.125″ Cutting Width, Series TDT-.00E
• Spot Welder Tips; Tip Type: Straight Tip C Nose (Flat); Material: RWMA Class 1 - C15000; Type: Straight Tip C Nose (Flat)
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.118″ Cutting Width, Series TDT-.00E
• Pressure Gauge: 1-1/2" Dial, Center Back Mount
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.118″ Cutting Width, Series TDT-.00E
• Cut, Puncture & Abrasive-Resistant Gloves: Size L, ANSI Cut A3, ANSI Puncture 4, Nitrile, PolyKor Black & Blue, Full Coated, Double Dipped Grip, ANSI Abrasion 4
• Grooving Insert: GMM4020040MW CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series KGM
• Jobber Length Drill Bit: 45 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Grooving Insert: TDITT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.118″ Cutting Width, Series TDIT-.00E
• Jobber Length Drill Bit: 45 &deg N/A RH Cut, Spiral Flute, Straight Shank, Series SCD
• Way Oil: 1 gal Bottle ISO 32, Food Grade
• Grooving Insert: GMM3020040MS CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Grooving Insert: GMM3015040V CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 3 mm Cutting Width, 8 mm Max Depth, Series KGM
• Grooving Insert: GMM2420020MW CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 2.4 mm Cutting Width, 17 mm Max Depth, Series KGM
• Hex Key:
• Grooving Insert: TDTT TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.118″ Cutting Width, Series TDT-.00E
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.118″ Cutting Width, Series TDT-.00E
• Cargo Net: 100' Long, 96" Wide, Polypropylene
• Grooving Insert: TDIPP TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.118″ Cutting Width, Series TDIP
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/2 - 18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Ad
• Grooving Insert: TDITT TT7220, Solid Carbide TiCN Finish, Neutral, 0.118″ Cutting Width, Series TDIT-.00E
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-1/2 - 18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Ad
• Grooving Insert: TDTT TT9030, Solid Carbide TiAlN Finish, Neutral, 0.118″ Cutting Width, Series TDT-.00E
• Pneumatic & Valve Lockouts; Type: Butterfly Valve Lockout; Valve Lockout Type: Butterfly Valve; Maximum Valve Handle Size (Inch): 4; 4 in; Maximum Pipe Diameter (Inch): 4; 4 in; Minimum Valve Handle Width: 2 in; Minimum Valve Handle Size (Inch): 2; 2 in;
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.124″ Cutting Width, Series TDT-.00E
• Hard Hat Accessories; Type: Visor; Hard Hat Compatibility: X5000; Material: Polycarbonate; Material: Polycarbonate; Attachment Type: Slide In/Out; Attachment Method: Slide In/Out; Color: Gray; Additional Information: Anti-Fog; P3EV/2-10P Adapter or 3M X-S
• Indexable Square-Shoulder Face Mill: A490300R0909A100200EF, 3'' Cut Dia, 1.0000″ Arbor Hole Dia, 0.3150″ Max Cutting Depth Uses 9, SD.. 09T3.. Inserts, Through Coolant, Series A490-09
• Grooving Insert: GIR NS9530, Cermet Uncoated, Right Hand, 0.098″ Cutting Width, Series GIR
• Compression Spring: 2.468″ OD, 4.75″ Free Length 0.207″ Wire Dia, 89.153 lb Max Load, 38.803 lb/in Spring Rate, Stainless Steel
• Electromagnet Lock Accessories; Type: Electrical Power Transfer; For Use With: Exit Devices; Material: Stainless Steel; Material: Stainless Steel; For Use With: Exit Devices; Type: Electrical Power Transfer; Accessory Type: Electrical Power Transfer; Type
• Grooving Insert: GX34GD6 WSM23S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series Tiger-tec Silver
• Grooving Insert: GX34GD6 WSM33S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series Tiger-tec Silver
• Grooving Insert: GX34CF5 WSM33S, Solid Carbide Al Finish, Left Hand, 0.118″ Cutting Width, Series Tiger-tec Silver
• Corner Radius End Mill: 1-1/4″ Dia, 2-1/2″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 1-1/4″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2108
• Grooving Insert: GX34CF5 WSM33S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series Tiger-tec Silver
• Threaded Ring Gage: 1-3/16-18 Thread, UNEF, Class 2A, Go & No Go
• Polyimide Film Tape: 6″ Wide, 100' x 5 mil Thick Non-Adhesive, -40 to 450 ° F
• Grooving Insert: GX34CE4 WSM33S, Solid Carbide Al Finish, Left Hand, 0.118″ Cutting Width, Series Tiger-tec Silver
• Threaded Ring Gage: 1-3/16-18 Thread, UNEF, Class 3A, Go & No Go
• Grooving Insert: GX34CE4 WSM33S, Solid Carbide Al Finish, Right Hand, 0.118″ Cutting Width, Series Tiger-tec Silver
• Corner Radius End Mill: 3/4″ Dia, 4″ LOC, 3 Flutes, Solid Carbide 6-1/2″ OAL, 3/4″ Shank Dia, 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2853
• Grooving Insert: GX34CF5 WSM43S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series Tiger-tec Silver
• Corner Radius End Mill: 3/4″ Dia, 4″ LOC, 3 Flutes, Solid Carbide 6-1/2″ OAL, 3/4″ Shank Dia, 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2853
• Corner Radius End Mill: 3/4″ Dia, 4″ LOC, 3 Flutes, Solid Carbide 6-1/2″ OAL, 3/4″ Shank Dia, 35 ° Helix, DLC Coated, Centercutting End, Centercutting, Series 2853
• Grooving Insert: GX34CE4 WKP23S, Solid Carbide Al2O3 & TiCN Finish, Neutral, 0.118″ Cutting Width, Series Tiger-tec Silver
• Knob Locksets; Type: Entrance; Tumbler; Door Thickness: 1 3/8 - 2; Back Set: 2-3/4; Material: Brass; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1 3/8 - 2; Material: Brass; Design/Shape: Ball Knob; Additional Information: 2-9/16″ Concave Rose
• Grooving Insert: GX34CE4 WSM43S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series Tiger-tec Silver
• Knob Locksets; Type: Dormitory; Tumbler; Door Thickness: 1 3/8 - 2; Back Set: 2-3/4; Material: Brass; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1 3/8 - 2; Material: Brass; Design/Shape: Ball Knob; Additional Information: Standard Strike; 3-
• Knob Locksets; Type: Dormitory; Tumbler; Door Thickness: 1 3/8 - 2; Back Set: 2-3/4; Material: Brass; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1 3/8 - 2; Material: Brass; Design/Shape: Ball Knob; Additional Information: 3-3/8″ Convex Rose;
• Grooving Insert: GX34CE4 WSM33S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series Tiger-tec Silver
• Knob Locksets; Type: Tumbler; Classroom; Door Thickness: 1 3/8 - 2; Back Set: 2-3/4; Material: Brass; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1 3/8 - 2; Material: Brass; Design/Shape: Ball Knob; Additional Information: 3-3/8″ Concave Rose
• Grooving Insert: GX34CF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series Tiger-tec Silver
• Grooving Insert: GX34CF5 WSM33S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series Tiger-tec Silver
• Strip: Buna-N Rubber, 1/4″ Wide, 120″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Turning Insert: TPG543 KCP25C, Carbide
• Jobber Length Drill Bit: 0.3268″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Power Riveter Accessories; Accessory Type: C Yoke
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 1040
• Safes; Type: Depository Safe; Internal Width (Inch): 13-51/64; Internal Height (Inch): 18-1/2; Internal Depth (Inch): 11-1/4; External Width (Inch): 14; External Height (Inch): 27; External Depth (Inch): 14; UL Fire Rating (Hours): Not Rated; Cubic Feet:
• Freshmatic Life Scents Ultra Refill
• Freshmatic Life Scents Ultra Refill
• Stationary Work Bench: 24″ Wide, 72″ Deep, 30″ High
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.7600; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Pipe Thread Plug Gage: Tapered, 3-8, Single End
• Milling Machine Power Feed: 140 in/lb Max Peak Torque, 100 in/lb Max Continuous Torque 37″ Max Feed Rate per min, 16″ Traversing Speed per min
• Stationary Work Bench: 24″ Wide, 72″ Deep, 37″ High
• Pipe Thread Plug Gage: Tapered, 3-8, Single End
• Plastic Sheet: Garolite, 3/8″ Thick, 6″ Long, Brown, 10,000 psi Tensile Strength Rockwell M-100
• Welded Bandsaw Blade: 20' 5″ Long, 1/2″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Abrasive Belt: 2″ Width, Aluminum Oxide Non-Woven, Y Weighted
• Square End Mill: 0.1969'' Dia, 0.6299'' LOC, 0.2362'' Shank Dia, 2.2835'' OAL, 5 Flutes, Solid Carbide AlTiN Finish, 45 ° Helix, Centercutting, Series MSM5F-NB
• Abrasive Belts
• Square End Mill: 0.1969'' Dia, 0.6299'' LOC, 0.2362'' Shank Dia, 2.2835'' OAL, 5 Flutes, Solid Carbide AlCrN Finish, 45 ° Helix, Centercutting, Series MSM5F
• Pipe Fitting: 1/2 x 1/2″ Fitting, 316 Stainless Steel 150 psi
• Paint Pads; Application: Fences; Decks; Size: 9; For Use With: All Hardwood Floor Coatings; Stains; Polyurethane Coating; All Hardwood Deck Coatings; Paints
• Jobber Length Drill Bit: 0.5118″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.5″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Nail & Framing Hammers; Claw Style: Curved; Head Weight Range: 21 oz. - 25 oz.; Overall Length Range: 18″ - 23.9″; Handle Material: Wood & Stainless Steel; Face Surface: Milled; Handle Material: Wood & Stainless Steel; Handle Material: Wood & Stainless St
• Jobber Length Drill Bit: 0.4843″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• DVD-R Disc: Use with DVD
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/8″ Thick, Black Rockwell R-105
• 18" Dia, 36 Grit, Ceramic Blend
• Taper Length Drill Bit: 0.2720″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Duct Tape: 1″ Wide, 15 mil Thick, Aluminum Foil Acrylic Adhesive, 126 lb/in Tensile Strength
• Safety Exhaust: 3/8″ Pipe, Full Port, Brass 1-Way Flow & In-Line, Female NPT, 600 psi WOG
• Corner Rounding End Mills; Mill Diameter (Inch): 1/8; Mill Diameter (Decimal Inch): 0.1250; Number Of Flutes: 3; End Mill Material: Solid Carbide; Radius (Decimal Inch): 0.0100; Shank Type: Cylindrical; Flute Type: Helical Flute; Shank Diameter (Inch): 1/
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-3/8 - 18; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Ad
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 1-3/8 - 18; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 5; Ad
• Ball End Mill: 0.017″ Dia, 0.051″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Cut-Resistant Gloves: Size XS, ANSI Cut A3, Polyurethane, PolyKor Black, Full Coated