Products

• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.07″ Dia, 0.56″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Strip: EPDM Rubber, 2″ Wide, 120″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Ball End Mill: 0.093″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball Grip Quick-Release Pin: Button Handle, 3/16″ Pin Dia, 6″ Usable Length 6.83″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Ball End Mill: 0.1″ Dia, 0.8″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.12″ Dia, 1″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3220; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3220; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Power Riveter Accessories
• Precision & Specialty Screwdrivers; Tool Type: Torx Screwdriver; Blade Length (mm): 4; Shaft Length: 100 mm; Handle Length: 205 mm; Handle Color: Yellow; Orange; Finish: Gunmetal; Body Material: Chrome Alloy Steel; Insulated: Yes; Overall Length (Inch): 8
• Compression Packing; Material: Carbon Fiber; Size: 3/16; Spool Length: 5; Color: Black; Maximum Working Pressure (psi): 4000.0 psi; 4000; PSC Code: 5330; Color: Black; Maximum Working Pressure: 4000.0 psi; Material: Carbon Fiber
• Hex Head Cap Screw: 1/2-13 x 2-1/2″, Grade 17-4PH Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• Abrasive Belt: 6" Wide, 308" OAL, 220 Grit, Aluminum Oxide
• Square End Mill: 1/64'' Dia, 0.045'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Spot Welder Tips; Tip Type: Straight Tip A Nose (Pointed); Material: RWMA Class 2 - C18200; Type: Straight Tip A Nose (Pointed)
• Sheet: Neoprene Rubber, 24″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Full Face Respirator: Silicone, Medium 4-Point Suspension, Bayonet Connection
• M4x0.7, 15.53mm OAL, 8mm Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 6mm Body Length, 9.53mm Thread Length, 2.8mm Thread Depth, Grade 360, Zinc-Plated
• Black Hex Bushing: 2-1/2 x 2″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Plastic Sheet: Acetal, 1-1/4″ Thick, 6″ Long, Black, 8,500 psi Tensile Strength Rockwell M-90
• Die Drill Bit: 0.1850″ Dia, 135 °, Solid Carbide Uncoated, 5/8″ Flute, 2″ OAL, Series 200
• Ball End Mill: 0.021″ Dia, 0.031″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 3 Flute, 0.0063″ Chamfer Width, Solid Carbide 3.66 mm OAL, Bright/Uncoated, Centercutting
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 3 Flute, 0.0063″ Chamfer Width, Solid Carbide 3.66 mm OAL, ZrN Coated, Centercutting
• Chamfer Mills; Number Of Flutes: 6; End Type: Single; Included Centerline Angle: 90; Included Side Angle: 45
• Corner Chamfer End Mill: 0.7087″ Dia, 1.2598″ LOC, 3 Flute, 0.0071″ Chamfer Width, Solid Carbide 3.66 mm OAL, Bright/Uncoated, Centercutting
• Corner Chamfer End Mill: 0.7087″ Dia, 1.2598″ LOC, 3 Flute, 0.0071″ Chamfer Width, Solid Carbide 3.66 mm OAL, ZrN Coated, Centercutting
• Plastic Rod: Garolite, 4' Long, 9/16″ Dia, Brown Rockwell M-100
• Chamfer Mills; Number Of Flutes: 6; End Type: Single; Included Centerline Angle: 60; Included Side Angle: 60
• #8-32, 2-7/8″ OAL, 3/8″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 2-1/2″ Body Length, 3/8″ Thread Length, 7/16″ Thread Depth, Grade 360, Zinc-Plated
• Chamfer Mills; Number Of Flutes: 6; End Type: Single; Included Centerline Angle: 120; Included Side Angle: 30
• Round Linear Shafting; Shaft Type: Standard; Diameter (mm): 101.6000; Diameter (Decimal Inch): 4.0000; Diameter (Inch, Fraction): 4; Shaft Diameter: 101.600; Shaft Diameter: 4.0000; Material: Steel; Length (Inch): 5; Minimum Diameter Tolerance: 101.539 mm
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Oscillating Blade: 1-3/8" Cutting Dia
• Taper Length Drill Bit: 0.3150″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Gasket Tapes; Thickness: 1/8; Width (Inch): 3/4; Color: Black; Material: Vinyl Foam; Length (Feet): 5 yd; Material: Vinyl Foam
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 3 Flute, 0.0031″ Chamfer Width, Solid Carbide 2.52 mm OAL, ZrN Coated, Centercutting
• Corner Chamfer End Mill: 0.2362″ Dia, 0.5118″ LOC, 3 Flute, 0.0024″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Thread Forming Tap: DIN 2174, 6GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Corner Chamfer End Mill: 0.2362″ Dia, 0.5118″ LOC, 3 Flute, 0.0024″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Thread Forming Tap: DIN 2174, 7GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 3 Flute, 0.0039″ Chamfer Width, Solid Carbide 2.87 mm OAL, Bright/Uncoated, Centercutting
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 3 Flute, 0.0039″ Chamfer Width, Solid Carbide 2.87 mm OAL, ZrN Coated, Centercutting
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 80, Acrylic Adhesive Backing
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 3 Flute, 0.0047″ Chamfer Width, Solid Carbide 3.31 mm OAL, Bright/Uncoated, Centercutting
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 3 Flute, 0.0047″ Chamfer Width, Solid Carbide 3.31 mm OAL, ZrN Coated, Centercutting
• Chamfer Mills; Number Of Flutes: 6; End Type: Single; Included Centerline Angle: 60; Included Side Angle: 60
• Hydraulic Hose Fittings & Couplings; Type: E-Series Straight Through Female Threaded Plug; Fitting Type: Female Plug; Hose Inside Diameter (Decimal Inch): 0.3750; Hose Size: 3/8
• Chamfer Mills; Number Of Flutes: 6; End Type: Single; Included Centerline Angle: 120; Included Side Angle: 30
• Die Drill Bit: 0.2480″ Dia, 135 °, Solid Carbide Coated, Series 200
• 12" Wide x 72" High x 3/8" Deep, Locker Solid Plastic End Panel
• Chamfer Mills; Number Of Flutes: 6; End Type: Single; Included Centerline Angle: 90; Included Side Angle: 45
• Deep Socket Hand Socket: 3/8" Drive, 11/32" Socket, 6-Point
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 3 Flute, 0.0055″ Chamfer Width, Solid Carbide 3.31 mm OAL, ZrN Coated, Centercutting
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 3 Flute, 0.0055″ Chamfer Width, Solid Carbide 3.31 mm OAL, Bright/Uncoated, Centercutting
• 12" Wide x 60" High x 3/8" Deep, Locker Solid Plastic End Panel
• Toilet Seats; Type: Closed Front w/ Cover; Style: FAST-N-LOCK; Material: Plastic; Color: White; Outside Width: 14-1/2; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Combination Wrench: 5/16" Head Size, 15 deg Offset
• Toilet Seats; Type: Open Front w/o Cover; Style: Round; Material: Plastic; Color: Black; Outside Width: 14-1/2; Inside Width: 0; Length (Inch): 18.6; Minimum Order Quantity: Plastic; Material: Plastic
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 3 Flute, 0.0031″ Chamfer Width, Solid Carbide 2.52 mm OAL, Bright/Uncoated, Centercutting
• Toilet Seats; Type: Luxury Slow-Close w/ Cover; Style: Elongated; Material: Plastic; Color: White; Outside Width: 14-1/2; Inside Width: 0; Length (Inch): 18.6; Minimum Order Quantity: Plastic; Material: Plastic
• Chamfer Mills; Number Of Flutes: 6; End Type: Single; Included Centerline Angle: 60; Included Side Angle: 60
• Blasting Media
• Chamfer Mills; Number Of Flutes: 6; End Type: Single; Included Centerline Angle: 120; Included Side Angle: 30
• Packing Tape: Clear, Hot Melt Rubber Resin Adhesive Polypropylene Film, 3.1 mil Thick, 35 lb/in Tensile Strength
• 1 10-Piece EVA Resin Non-Para Toilet Bowl Clip Orange (Color), Orange Scent
• Chamfer Mills; Number Of Flutes: 6; End Type: Single; Included Centerline Angle: 90; Included Side Angle: 45
• Abrasive Belt: 3" Wide, 72" OAL, Aluminum Oxide
• Oil Change Tools; Type: Pliers; For Use With: PVC; Maximum Diameter (Inch): 3-1/2; Number of Pieces: 1.000; Length (Decimal Inch): 9.0000; Material: Metal; Width (Decimal Inch): 2.5700
• Sponges & Scouring Pads; Pad Type: Scouring Sponge; Scour Type: Clean; Material: Mineral; Resin; Cellulose; Thickness (Inch): 3/4; Color: Yellow; Green; Width (Inch): 4; Thickness (Decimal Inch - 4 Decimals): 0.7500; Length (Decimal Inch - 4 Decimals): 6.
• Silicone Tube: 5/8″ OD, 10' Length 40 Max psi, Red
• Jobber Length Drill Bit: 0.6875″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Indexable Broaching Accessories; Accessory Type: Ball-Bearing Point Set Screw; For Use With: Lathe Without Y-Axis; Additional Information: M6X1
• Silicone Tube: 5/8″ OD, 10' Length 40 Max psi, Clear
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (mm): 16.00; Length of Cut (mm): 16.0000; Number Of Flutes: 4
• Post Top Sign Frame for Retractable Belt Barriers, 7″ x 11″ Vertical
• Indexable Broaching Accessories; Accessory Type: Ball-Bearing Point Set Screw; For Use With: Lathe Without Y-Axis; Additional Information: 5/16-18X37/64
• Round Linear Shafting; Shaft Type: Standard; Diameter (mm): 28.5800; Diameter (Decimal Inch): 1.1250; Diameter (Inch, Fraction): 1-1/8; Shaft Diameter: 28.580; Shaft Diameter: 1.1250; Material: Steel; Length (Inch): 60; Minimum Diameter Tolerance: 28.5496
• Indexable Broaching Accessories; Accessory Type: Torx Driver; For Use With: Size 18/26 Tool Holder; Additional Information: T-20
• Wall Mounted Retractable Belt Barrier: Black Casing, 11' Black Belt
• Abrasive Belt: 1" Wide, 42" OAL, Aluminum Oxide
• Black Coupling: 2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Taper Length Drill Bit: 0.2188″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Chucking Reamer: 0.253″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Turning Insert: WNMG080408IPE+ ACS15M, Carbide
• Sheet: EPDM Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Disposable Gloves: Size X-Large, 6 mil, Nitrile Orange, 9-1/2″ Length, FDA Approved
• Chucking Reamer: 0.2555″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Ball End Mill: 6.00 mm Dia, 16.00 mm LOC, 2 Flute, Solid Carbide
• Chucking Reamer: 0.2575″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Round Die: #6-32, High Speed Steel
• Die Drill Bit: 0.2420″ Dia, 135 °, Solid Carbide ALtima Finish, 3/4″ Flute Length, 2″ OAL
• Chucking Reamer: 0.267″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Corner Radius End Mill: 1" Dia, 1-1/2" LOC, 0.0600" Radius, 6 Flute, Solid Carbide
• Chucking Reamer: 0.274″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Industrial & Laundry Faucets; Type: Base Mount Faucet; Style: Base Mounted; Design: Base Mounted; Handle Type: Knob; Spout Type: Swing Spout/Nozzle; Mounting Centers: Single Hole; Spout Size: 17; Type: Base Mount Faucet; Style: Base Mounted; Type: Base Mo
• Chucking Reamer: 0.276″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• #6-32, 0.656″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 0.406″ Body Length, 1/4″ Thread Length, 1/4″ Thread Depth, Grade 303, Uncoated
• M5x0.8, 39.53mm OAL, 8mm Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 30mm Body Length, 9.53mm Thread Length, 12.7mm Thread Depth, Grade T-3, Uncoated
• Chucking Reamer: 0.2885″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Vacuum Cleaner Attachments & Hose; Attachment Type: Dust Brush; For Use With: Wet/Dry Vacs; ESD Safe: No; Accessory Kit Contents: Dust Brush Nozzle; Single or Double Edge: Single; Number of Pieces: 1.000; Acid Resistant: No
• Straight-Flute & Die Drill Bits
• Round Linear Shafting; Shaft Type: Standard; Diameter (mm): 9.5300; Diameter (Decimal Inch): 0.3750; Diameter (Inch, Fraction): 3/8; Shaft Diameter: 9.530; Shaft Diameter: 0.3750; Material: Steel; Length (Inch): 18; Minimum Diameter Tolerance: 9.4996 mm
• Plastic Bar: Acetal, 1/16″ Thick, Black Rockwell M-90
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6669; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Sleeve Bearings; Bearing Type: Sleeve; Outside Diameter (Inch): 3-11/16; Outside Diameter (Decimal Inch - 4 Decimals): 3.6875; Inside Diameter (Inch): 3-1/2; Inside Diameter (Decimal Inch): 3.5000
• Jobber Drill: 11/32" Dia, 135 deg Point, Cobalt
• Hex Head Cap Screw: 3/8-16 x 2-1/4″, Grade 8, Uncoated Fully Threaded
• Abrasive Belt: 6" Wide, 126" OAL, 80 Grit, Aluminum Oxide
• Half & Full Facepiece Cartridges & Filters; Product Service Code: 4240
• Abrasive Belt: 6" Wide, 109" OAL, 120 Grit, Aluminum Oxide
• Sleeve Bearings; Bearing Type: Sleeve; Outside Diameter (Inch): 2-11/16; Outside Diameter (Decimal Inch - 4 Decimals): 2.6875; Inside Diameter (Inch): 2-1/2; Inside Diameter (Decimal Inch): 2.5000
• Abrasive Belt: 6" Wide, 108" OAL, 120 Grit, Aluminum Oxide
• Taper Length Drill Bit: 0.2244″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Taper Length Drill Bit: 0.2283″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Plastic Bar: Acetal, 1/4″ Thick, White
• Plastic Bar: Acetal, 1/4″ Thick, White
• Taper Length Drill Bit: 0.1299″ Dia, 130 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 668
• Tire Accessories; Type: Emergency Chains; For Tire Size: 22.5-24.5''; 19.5''; For Use With: Heavy Trucks; Container Size: Kit; Additional Information: Fits 19.5″ to 24.5″ Rims; For Use With: Heavy Trucks
• #10 Screw 1-3/4″ OAL 0.192″ ID x 5/16″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Traffic Barrels, Delineators & Posts; Type: Handle Top Delineator; Material: LDPE; Reflective: Yes; Base Needed: Yes; Height (Inch): 28; Width (Inch): 4-1/2; Additional Information: Sub Brand: Watchtower ™; Sheeting Grade: Diamond; Stripe Color: White; Di
• Fluorescent Orange 12.0000Lb,
• Collet Stops & Accessories; Collet Series: 5C; Material: Steel; Material: Steel
• Half-Round & Spade Drill Bits; Drill Bit Type: Aircraft Dagger Drill; Drill Bit Size (Decimal Inch): 0.1285; Drill Bit Size (Wire): #30; Drill Point Angle: 120; Drill Bit Material: Solid Carbide; Overall Length (Decimal Inch): 4; Overall Length (Inch): 4;
• Hex Head Cap Screw: 1/2-20 x 3-1/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Half-Round & Spade Drill Bits; Drill Bit Type: Aircraft Dagger Drill; Drill Bit Size (Decimal Inch): 0.1250; Drill Bit Size (Inch): 1/8; Drill Point Angle: 120; Drill Bit Material: Solid Carbide; Overall Length (Decimal Inch): 4; Overall Length (Inch): 4;
• Half-Round & Spade Drill Bits; Drill Bit Type: Aircraft Dagger Drill; Drill Bit Size (Decimal Inch): 0.0980; Drill Bit Size (Wire): #40; Drill Point Angle: 120; Drill Bit Material: Solid Carbide; Overall Length (Decimal Inch): 4; Overall Length (Inch): 4;
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 1035
• Paints
• Half-Round & Spade Drill Bits; Drill Bit Type: Aircraft Dagger Drill; Drill Bit Size (Decimal Inch): 0.0938; Drill Bit Size (Inch): 3/32; Drill Point Angle: 120; Drill Bit Material: Solid Carbide; Overall Length (Decimal Inch): 4; Overall Length (Inch): 4
• Windex Glass & More, Multi-Surface, Streak-Free Commercial, 4 Piece Set, Capped Bottles, 2 Triggers, 32oz Nsf And Kosher Certified
• Hex Head Cap Screw: 1-14 x 5-1/2″, Grade L9 Steel, Zinc Yellow Dichromate Finish Partially Threaded
• Size L Hi-Viz Yellow & Black High Visibility Long Sleeve T-Shirt 44″ Chest, 1 Pocket, Polyester
• Sheet: Hypalon Rubber, 12″ Wide, 12″ Long, Black Durometer 60 to 70
• Micro Drill Bit: 0.0374″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Wire Stripper: 8 AWG 6.7″ OAL
• Grooving Tool: Internal Solid Carbide
• Shop Roll 1-1/2″ 240G W/DUSTMASK TRU-MAXX SHOP ROLL
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Die Drill Bit: 9/32″ Dia, 135 °, Solid Carbide Uncoated, 3/4″ Flute, 2-1/2″ OAL, Series 200
• Black Reducing Coupling: 2 x 3/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Plastic Bar: Acetal, 3/32″ Thick, Black Rockwell M-90
• Toilet Seats; Type: Closed Front w/ Slow Close and Lift Off Hinge; Style: Open Front; Material: Plastic; Color: White; Outside Width: 14-1/2; Inside Width: 0; Length (Inch): 18.6; Minimum Order Quantity: Plastic; Material: Plastic
• Safety Glass: Anti-Fog, Polycarbonate, Silver Mirror Lenses, Frameless, UV Protection Charcoal Frame, Single
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Clear Lenses, Frameless, UV Protection Charcoal Frame, Single, Adjustable
• Wrenches For Indexables; Wrench Type: Assembly Wrench; Indexable Tool Type: Boring Bar; Drive Type: Slotted; Toolholder Style Compatibility: GL50; Hardware Compatibility: Boring Bar; Overall Length: 13.98; Tool Material: Steel; Series: GL50; Toolholder St
• Abrasive Belt: 6" Wide, 108" OAL, 120 Grit, Aluminum Oxide
• Abrasive Belt: 6" Wide, 108" OAL, 100 Grit, Aluminum Oxide
• Threaded Rod: 1/2-13, 8″ Long, Alloy Steel, Grade B7 Inch Thread, 1A, Right Hand Thread
• Abrasive Belt: 6" Wide, 108" OAL, 80 Grit, Aluminum Oxide
• DOT Conspicuity Tape; Color: Red; Tape Material: Reflective Sheeting; Width (Inch): 5; Length (Feet): 15
• Micro Drill Bit: 0.0244″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Abrasive Belt: 6" Wide, 105" OAL, 60 Grit, Aluminum Oxide
• Micro Drill Bit: 0.0118″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Abrasive Belt: 6" Wide, 98" OAL, 100 Grit, Aluminum Oxide
• Abrasive Belt: 6" Wide, 89" OAL, 120 Grit, Aluminum Oxide
• Micro Drill Bit: 0.0146″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 303
• Hex Head Cap Screw: 5/16-18 x 3/4″, Grade A-286 Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 70, Plain Backing
• Micro Drill Bit: 0.0299″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Plastic Bar: Garolite, 1/8″ Thick, Yellow
• Micro Drill Bit: 0.0472″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 303
• Micro Drill Bit: 0.0295″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.4231; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Plastic Sheet: Garolite, 1-1/4″ Thick, 6″ Long, Brown, 16,000 psi Tensile Strength Rockwell M-100
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Pipe 90 ° Elbow: 1/2″ Fitting, 316 Stainless Steel FNPT x FNPT, Threaded, ASME B1.20.1, ASME B16.11-ANSI & ASTM A182-ANSI, 3,000 psi
• Abrasive Belt: 6" Wide, 89" OAL, 100 Grit, Aluminum Oxide
• Engine Additives; Engine Additive Type: Engine Oil Extender; Container Size: 10 fl oz; Color: Yellow; Boiling Point: 480 - 1100 F
• Electronic Outside Micrometer: 5″, Carbide Tipped Measuring Face, IP65 0.00005″ Resolution, ±0.000050″Accuracy, Ratchet Thimble
• Abrasive Belt: 6" Wide, 89" OAL, 80 Grit, Aluminum Oxide
• Square End Mill: 0.0250" Dia, 0.0750" LOC, 4 Flute, Solid Carbide
• Automotive Fuel Filter: Diesel, 3.31″ OD
• 600 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 5/32″ Wide x 4″ Long x 5/32″ Thick
• Abrasive Belt: 6" Wide, 89" OAL, 80 Grit, Aluminum Oxide
• Milling Machine Power Feed: 140 in/lb Max Peak Torque, 100 in/lb Max Continuous Torque 37″ Max Feed Rate per min, 37″ Traversing Speed per min
• Milling Machine Power Feed: 140 in/lb Max Peak Torque, 100 in/lb Max Continuous Torque 37″ Max Feed Rate per min, 37″ Traversing Speed per min
• Abrasive Belt: 1" Wide, 42" OAL, Aluminum Oxide
• Pneumatic & Valve Lockouts; Type: Gate Valve Lockout; Valve Lockout Type: Gate Valve; Maximum Valve Handle Size (Inch): 7; 7 in; Maximum Pipe Diameter (Inch): 7; 7 in; Minimum Valve Handle Width: 3 in; Minimum Valve Handle Size (Inch): 3; 3 in; Minimum Pi
• Taper Length Drill Bit: 0.2087″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Garden Hose Spray Nozzles; Type: Watering Nozzle; Pre-set Nozzle; Nozzle Type: Watering Nozzle; Pre-set Nozzle; Style: Rear Trigger; Activation Method: Rear Trigger; Material: Plastic; Thread Type: GHT; Features: Ergonomic Non-Slip Handle; 7 Patterns; One
• Ratchet Set & Combination Wrench Set: 25 Pc, Inch & Metric
• Indexable Drill Insert: 21 BK7710, Carbide TiB2 Finish, Square
• Jobber Length Drill Bit: 0.5315″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Tarp/Dust Cover: Black & Green, Rectangle, Polyethylene, 15' Long x 10' Wide, 10 mil Polyethylene, Rectangle
• Jobber Length Drill Bit: 0.5512″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Garden Hose Spray Nozzles; Type: Watering Nozzle; Pre-set Nozzle; Nozzle Type: Watering Nozzle; Pre-set Nozzle; Style: Rear Trigger; Activation Method: Rear Trigger; Material: Plastic; Thread Type: GHT; Features: Ergonomic Non-Slip Handle; 7 Patterns; One
• 3/16″ Diam, 1-1/4 Overall Length, Phillips Drive Concrete Screw & Masonry Fastener Stainless Steel, StalGard GB Finish
• Jobber Length Drill Bit: 0.5433″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Jobber Length Drill Bit: 0.5156″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Size 2XL Hi-Viz Yellow High Visibility Long Sleeve T-Shirt 52″ Chest, 1 Pocket, Polyester
• Garden Hose Spray Nozzles; Type: Watering Nozzle; Pre-set Nozzle; Nozzle Type: Watering Nozzle; Pre-set Nozzle; Style: Rear Trigger; Activation Method: Rear Trigger; Material: Plastic; Thread Type: GHT; Features: Ergonomic Non-Slip Handle; 7 Patterns; One
• Jobber Length Drill Bit: 0.5156″ Dia, 135 °, Solid Carbide TX Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 142P
• Clamps For Indexables; Type: Lever; Clamp Style: KN; Industry Standard Number: KN106; Series: KN106
• Jobber Length Drill Bit: 0.5433″ Dia, 135 °, Solid Carbide TX Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 142P
• Abrasive Belt: 6" Wide, 89" OAL, 150 Grit, Aluminum Oxide
• Thread Repair Kits; Kit Type: Thread Repair; Insert Thread Size (mm): M20x2.5; Includes Drill: No; Includes Tap: Yes; Includes Installation Tool: Yes; Includes Tang Removal Tool: No; Insert Length (mm): 40.00
• Abrasive Belt: 6" Wide, 80" OAL, 36 Grit, Aluminum Oxide
• Abrasive Belt: 6" Wide, 89" OAL, 60 Grit, Aluminum Oxide
• M4x0.7 Coarse 10mm Long 6-Lobe Pin Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Pipe Hex Bushing: 1-1/2 x 1″ Fitting, 304 Stainless Steel MNPT x FNPT, Threaded, 150 psi
• 2″ Aluminum Pipe Coupling 150 psi, F End Connection, Grade 6061-T6
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 90, Acrylic Adhesive Backing
• Sheet: Neoprene Rubber, 12″ Wide, 12″ Long, Black Durometer 90, Acrylic Adhesive Backing
• Threaded Ring Gage: M78 x 1.00 Thread, Metric, Class 4H, Go
• Threaded Ring Gage: M78 x 1.00 Thread, Metric, Class 6H, Go
• Turning Insert: CNMG120404ENWL+ ACP25M, Carbide
• Threaded Ring Gage: M78 x 1.00 Thread, Metric, Class 6H, No Go
• Abrasive Belt: 6" Wide, 89" OAL, 50 Grit, Aluminum Oxide
• Self-Retracting Fall Limiter: 420 lb, 12' Line
• Gasket Tapes; Thickness: 1/16; Width (Inch): 3/4; Color: Black; Material: Vinyl Foam; Length (Feet): 5 yd; Material: Vinyl Foam
• Ball Grip Quick-Release Pin: L-Handle, 20 mm Pin Dia, 10 mm Usable Length 53.7 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/2″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Lumber; Thickness: 2; Width: 4; Length Ft.: 12; Wood Type: SPF
• Tank Flanges; Overall Height (Inch): 5/8
• Check Valve: 3/4″ Pipe Inline, MNPT x FNPT, 400 WOG
• Turning Insert: VCGT220.5FN_A5 CTDMD05, Polycrystalline Diamond Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Welder's & Heat Protective Gloves; Glove Type: Cut & Heat Resistant; Coating Material: Silicone; Coating Coverage: Palm; Lining Material: Kevlar/Nomex; Back Material: Kevlar; Grip Surface: Dotted; Men's Size: Medium; Aluminized Coverage: None; Women's Siz
• Turning Insert: VCGT221FN_A4 CTDMD05, Polycrystalline Diamond Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Hand Tube Cutter: 1/8 to 1/2″ Tube Cuts Copper
• Micro Drill Bit: 0.036″ Dia, 135 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Turning Insert: VCGT220.5FN_A2 CTDMD05, Polycrystalline Diamond Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Welder's & Heat Protective Gloves; Glove Type: Cut & Heat Resistant; Coating Material: Silicone; Coating Coverage: Palm; Lining Material: Kevlar/Nomex; Back Material: Kevlar; Grip Surface: Dotted; Men's Size: Large; Aluminized Coverage: None; Women's Size
• Cargo Net
• Turning Insert: VCGT331FN_A2 CTDMD05, Polycrystalline Diamond Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Micro Drill Bit: 0.0264″ Dia, 135 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Welder's & Heat Protective Gloves; Glove Type: Cut & Heat Resistant; Coating Material: Silicone; Coating Coverage: Palm; Lining Material: Kevlar/Nomex; Back Material: Kevlar; Grip Surface: Dotted; Men's Size: 2X-Small; Aluminized Coverage: None; Women's S
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 7/8-9; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Material: High Speed Steel; A
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 7/8-9; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Material: High Speed Steel; A
• Micro Drill Bit: 0.035″ Dia, 135 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: M24 x 3.00, DIN, 4 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Hardlube Finish 2.598″ Thread Length, 6.2992″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Taper Length Drill Bit: 0.4375″ Dia, 118 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5536
• Micro Drill Bit: 0.11″ Dia, 135 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Brass Pipe 90 Male Elbow: 1/4″ Fitting, Threaded, MNPT x MNPT with Thread Sealant MNPT x MNPT w/Thread Sealant Ends, 3,400 psi, Brass Finish, Class Instrumentation
• Welder's & Heat Protective Gloves; Glove Type: Cut & Heat Resistant; Coating Material: Silicone; Coating Coverage: Palm; Lining Material: Kevlar/Nomex; Back Material: Kevlar; Grip Surface: Dotted; Men's Size: Small; Aluminized Coverage: None; Women's Size