Products

• Micro Drill Bit: 0.0283″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Taper Length Drill Bit: 0.1654″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Latches; Type: Compact Latch; Compact; Length (Decimal Inch): 2.170; Width (Inch): 2.170; Width (mm): 55.12; Height (Inch): 1.89; Overall Width: 2.170; 55.12; Overall Height: 1.89; 48.006; Finish/Coating: Plastic; Minimum Order Quantity: Fiberglass; Mater
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9115; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.028″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0195; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Turning Insert: SNMG644RT TT8020, Solid Carbide TiCN Finish, Neutral, 0.6870″ Long, 3/4″ Inscribed Circle, 0.0630″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Micro Drill Bit: 0.0276″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9116; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0272″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0194; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Ball End Mill: 0.25″ Dia, 1.125″ LOC, 4 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0193; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0268″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Taper Length Drill Bit: 0.2090″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9117; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0264″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Taper Length Drill Bit: 0.2130″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9118; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.026″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0256″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Plastic Sheet: Garolite, 1/32″ Thick, Green, 37,000 psi Tensile Strength Rockwell M-110
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0192; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0252″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Plastic Rod: Garolite (G-11), 2' Long, 1/4″ Dia, Green Rockwell M-110
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0191; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0248″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9119; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9121; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0244″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9122; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.024″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Polytetrafluroethylene Film Tape: 1/2″ Wide, 5 yd Long, 3.7 mil Thick 27 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9123; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0236″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9124; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0232″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0228″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9127; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0224″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.022″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9129; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0217″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9572; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9573; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0213″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9571; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0209″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 5.20; Groove Width (mm): 1.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 46.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 2.450; Ma
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9574; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 4.20; Groove Width (mm): 1.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 35.2000; Material Grade: Submicron; Maximum Hole Depth (mm): 15.00; Projection (mm): 1.950; Ma
• Micro Drill Bit: 0.0201″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9575; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0205″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 20.00; Groove Width (mm): 1.50; Shank Diameter (mm): 20.0000; Overall Length (mm): 20.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 2.450;
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9576; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 20.00; Groove Width (mm): 1.00; Shank Diameter (mm): 20.0000; Overall Length (mm): 20.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 2.450;
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9577; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0197″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0783″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 4.20; Groove Width (mm): 1.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Material Grade: Submicron; Maximum Hole Depth (mm): 15.00; Projection (mm): 1.950; Ma
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9578; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 20.00; Groove Width (mm): 2.00; Shank Diameter (mm): 20.0000; Overall Length (mm): 20.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 2.450;
• Micro Drill Bit: 0.078″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9579; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0772″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9581; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9582; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0776″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9583; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0764″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/4″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9584; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0768″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9585; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.076″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9101; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0756″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9586; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0752″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9102; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0748″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Gasket Tapes; Thickness (Decimal Inch): 0.1180; Width (Inch): 1/2; Color: White; Material: Compressible ePTFE; Length (Feet): 5; Material Grade: Standard; PSC Code: 5330; Maximum Temperature (F): 500; Minimum Temperature (F): -450; Material: Compressible
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9103; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9587; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0744″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9588; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Hex Head Cap Screw: 1/2-13 x 1-1/2″, Grade 17-4PH Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• Polyester Film Tape: 1/2″ Wide, 72 yd Long, 2.5 mil Thick 20 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9104; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.074″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Traffic Cones; Type: Traffic Cone With Base; Color: Fluorescent Orange; Reflective Collars: No; Height (Inch): 28; Base Width (Decimal Inch): 14.5000; Material: PVC; Compliance: MASH Compliant; MUTCD Standards; Weight (Lb.): 10.0000; Special Characteristi
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9589; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0736″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Polyimide Film Tape: 3/4″ Wide, 36 yd Long, 2.5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, -40 to 500 ° F
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9105; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0732″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9106; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0728″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9107; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Turning Insert: RNG45T6 TC3020, Ceramic Uncoated Finish, Neutral, 0.5000″ Long, 1/2″ Inscribed Circle, 0.2500″ Corner Radius, N/A Round, Series RNG
• Hand Sanitizer: Gel, 33 oz, Pack
• Micro Drill Bit: 0.0724″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Press Fit Headless Drill Bushing: P, 1-1/32″ ID, 1-3/8″ OD 2-1/2″ OAL, Carbon Steel
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9108; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0149; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.072″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0713″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Press Fit Headless Drill Bushing: P, 3/4″ ID, 1-3/8″ OD 2-1/2″ OAL, Carbon Steel
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9151; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0717″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Abrasive Belt: 6" Wide, 79" OAL, 120 Grit, Aluminum Oxide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9109; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0159; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0709″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Abrasive Belt: 6" Wide, 89" OAL, 100 Grit, Aluminum Oxide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9152; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0705″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Corner Radius End Mill: 0.0315″ Dia, 0.0315″ LOC, 2 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0158; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Flange Gasketing; Nominal Pipe Size: 3; Inside Diameter (Inch): 3-1/2; Thickness: 1/8; Outside Diameter (Inch): 7-1/2; Material: Buna-N Rubber; Color: Black; Suggested Bolt Size: 5/8; Maximum Temperature (F): 400.000; Maximum Pressure (psi): 150.00; Minim
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9153; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0701″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0157; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0697″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Slip-Fixed Bushing: SF, 19/32″ ID, 1″ Body OD 1-1/2″ Length Under Head
• Micro Drill Bit: 0.0693″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9155; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Combo Drill & Countersink: Metric Bright (Polished) Finish
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0156; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0689″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0155; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0685″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9156; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0681″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0154; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0677″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0673″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0153; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0669″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9158; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0665″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0152; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0661″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9159; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0151; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0657″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0654″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9161; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.065″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Pipe Hex Bushing: 2 x 1/2″ Fitting, 304 Stainless Steel MNPT x FNPT, Threaded, 150 psi
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9162; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Plastic Sheet: Cast Acrylic, 3/32″ Thick, 32″ Long, Clear, 8,000 psi Tensile Strength Rockwell M-95
• Micro Drill Bit: 0.0646″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9163; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0169; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0642″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0000; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0638″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9164; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0634″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0168; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Grooving Tool: Internal Solid Carbide
• Micro Drill Bit: 0.063″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9165; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0626″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0167; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0622″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0618″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0166; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9167; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0614″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0165; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Grooving Tool: Internal Solid Carbide
• Micro Drill Bit: 0.061″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9168; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0606″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0164; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0602″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0163; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0598″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9169; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0162; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0594″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0161; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0587″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9131; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0583″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide FIREX Finish, 2.50 mm TPI, Series 25655
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9132; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide FIREX Finish, 1.5 mm TPI, Series 25654
• Micro Drill Bit: 0.0579″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0178; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide FIREX Finish, 1.00 mm TPI, Series 25654
• Micro Drill Bit: 0.0575″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Black 45 ° Street Elbow: 2-1/2″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9133; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Micro Drill Bit: 0.0567″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• O-Cedar Quick ChangeTM Mopstick, Fiberglass Handle, 1 ea
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 10' Long x 10' Wide, 12 mil Polyethylene, Rectangle
• Micro Drill Bit: 0.0559″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0563″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 15.00; Groove Width (mm): 1.50; Shank Diameter (mm): 15.0000; Overall Length (mm): 15.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 15.00; Projection (mm): 1.900;
• Micro Drill Bit: 0.0547″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• 100 Grit Aluminum Oxide Rectangular Roughing Stone Fine Grade, 1″ Wide x 6″ Long x 1/4″ Thick
• Micro Drill Bit: 0.0555″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0543″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• 80 Grit Aluminum Oxide Rectangular Roughing Stone Medium Grade, 1″ Wide x 6″ Long x 1/4″ Thick
• Micro Drill Bit: 0.0539″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• #6-32, 2″ OAL, 1/4″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 1-3/4″ Body Length, 1/4″ Thread Length, 3/8″ Thread Depth, Grade 360, Zinc-Plated
• Micro Drill Bit: 0.0535″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0528″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0524″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.052″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0516″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Compression Tube:
• Abrasive Belt: 6" Wide, 78-1/2" OAL, 120 Grit, Aluminum Oxide
• Micro Drill Bit: 0.0508″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0504″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.05″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Polyester Film Tape: 1″ Wide, 10 yd Long, 3.5 mil Thick 46 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Micro Drill Bit: 0.0488″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0496″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0484″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.048″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0476″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0469″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 10.24; Load Capacity: 52 lbs Capacity; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 7.24; E
• Corner Radius End Mill Head: 1″ Dia, 1-1/2″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 10.24; Load Capacity: 52 lbs Capacity; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 7.24; E
• Micro Drill Bit: 0.0465″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0461″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 8.66; Load Capacity: 52 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 5.66; Extension Force: 5