Products

• Plastic Sheet: Garolite, 1/16″ Thick, Green, 37,000 psi Tensile Strength Rockwell M-110
• 1″ Diam 6-Flute 35/38° Solid Carbide 0.012″ Corner Chamfer Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• Corner Radius End Mill: 1″ Dia, 3″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 6″ OAL, 1″ Shank Dia, 38 ° Helix, AlTiCrN Coated, Corner Radius End, Centercutting, Series HS
• Plastic Sheet: Chlorinated Polyvinyl Chloride, 1″ Thick, Gray Rockwell R-115
• Hex Head Cap Screw: 1/4-20 x 1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Analog Thread Depth Gages; Thread Size (Inch - 0 Decimals): 3/8 - 24; Thread Standard: UNF; Class Of Fit: 2B; Overall Length: 7.00; Material: Tool Steel; Standards: ASME B1.2
• Analog Thread Depth Gages; Thread Size (Inch - 0 Decimals): 5/16-24; Thread Standard: UNF; Class Of Fit: 2B; Overall Length: 7.00; Material: Tool Steel; Standards: ASME B1.2
• Analog Thread Depth Gages; Thread Size (Inch - 0 Decimals): 5/16-18; Thread Standard: UNC; Class Of Fit: 2B; Overall Length: 7.00; Material: Tool Steel; Standards: ASME B1.2
• Grooving Tool: Face Solid Carbide, 1/4″ Shank Dia, 0.02″ Groove Width
• Analog Thread Depth Gages; Thread Size (Inch - 0 Decimals): 3/8-16; Thread Standard: UNC; Class Of Fit: 2B; Overall Length: 7.00; Material: Tool Steel; Standards: ASME B1.2
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Burglar Alarm System; Material: Steel; Material: Steel; For Use With: Burglar Alarm System; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Corner Radius End Mill: 1-1/4″ Dia, 1-1/2″ LOC, 0.12″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 1-1/4″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Corner Radius End Mill: 0.7874″ Dia, 0.039″ Radius, 6 Flutes, Solid Carbide 35 ° Helix, Corner Radius End, Series MD133
• Ventilator Speed Controls; Number of Speeds: 2; Voltage: 120 V; For Use With: 5DD, 5DDU, 5ADE and 2VLD Ventilator Models; For Use With: 5DD, 5DDU, 5ADE and 2VLD Ventilator Models
• Corner Radius End Mill: 0.7874″ Dia, 0.039″ Radius, 6 Flutes, Solid Carbide 35 ° Helix, Corner Radius End, Series MD133
• Abrasive Belt: 6" Wide, 158" OAL, 120 Grit, Aluminum Oxide
• Traffic Barrels, Delineators & Posts; Type: Handle Top Stacker Cone; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 11; Additional Information: Series: 510; Sub Brand: Watchtower ™; Sheeting Grade: Diamond; Dimensions: 42 in With
• Analog Thread Depth Gages; Thread Size (mm): M10x1.50; Thread Standard: M; Class Of Fit: 6H; Overall Length: 7.00; Material: Tool Steel; Standards: DIN ISO 1502
• Corner Radius End Mill: 3 Flutes, Solid Carbide 39, 40 & 41 ° Helix, Carbo Coated, Corner Chamfer End, Centercutting, Series 6979
• Traffic Barrels, Delineators & Posts; Type: Handle Top Stacker Cone; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 11; Additional Information: Series: 510; Sub Brand: Watchtower ™; Sheeting Grade: Diamond; Dimensions: 42 in With
• Electromagnet Lock Accessories; Type: Exit Alarm; For Use With: Interior; Exterior Doors; Material: Plastic; Material: Plastic; For Use With: Interior; Exterior Doors; Type: Exit Alarm; Accessory Type: Exit Alarm; Type: Exit Alarm
• Electromagnet Lock Accessories; Type: Wrist Band; For Use With: RoamAlert System; Material: Plastic; Material: Plastic; For Use With: RoamAlert System; Type: Wrist Band; Accessory Type: Wrist Band; Type: Wrist Band
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• Plastic Bar: High Density Polyethylene, 3/4″ Thick, Opaque White
• Electromagnet Lock Accessories; Type: Wrist Band; For Use With: RoamAlert System; Material: Plastic; Material: Plastic; For Use With: RoamAlert System; Type: Wrist Band; Accessory Type: Wrist Band; Type: Wrist Band
• Electromagnet Lock Accessories; Type: Wrist Band; For Use With: RoamAlert System; Material: Plastic; Material: Plastic; For Use With: RoamAlert System; Type: Wrist Band; Accessory Type: Wrist Band; Type: Wrist Band
• Strip: Buna-N Rubber, 1-1/2″ Wide, 120″ Long, Black Durometer 40, Plain Backing
• Electromagnet Lock Accessories; Type: Wrist Band; For Use With: RoamAlert System; Material: Plastic; Material: Plastic; For Use With: RoamAlert System; Type: Wrist Band; Accessory Type: Wrist Band; Type: Wrist Band
• Electromagnet Lock Accessories; Type: Wrist Band; For Use With: RoamAlert System; Material: Plastic; Material: Plastic; For Use With: RoamAlert System; Type: Wrist Band; Accessory Type: Wrist Band; Type: Wrist Band
• Jobber Length Drill Bit: 0.4134″ Dia, 140 °, Solid Carbide Bright/Uncoated, 4.6654″ OAL, Right Hand Cut, Straight Flute, Straight-Cylindrical Shank
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Single or Multiple Components Within an Access Control System; Material: Steel; Material: Steel; For Use With: Single or Multiple Components Within an Access Control System; Type: Power Sup
• Corner Radius End Mill: 1-1/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 1-1/4″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Taper Length Drill Bit: 0.1495″ Dia, 130 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 669
• Taper Length Drill Bit: 0.1417″ Dia, 130 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 669
• Taper Length Drill Bit: 0.1535″ Dia, 130 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 669
• Milling Machine Power Feed: 140 in/lb Max Peak Torque, 100 in/lb Max Continuous Torque 37″ Max Feed Rate per min, 37″ Traversing Speed per min
• Taper Length Drill Bit: 0.1562″ Dia, 130 ° Coated, 3.0709″ Flute Length, 4.685″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 669
• Milling Machine Power Feed: 140 in/lb Max Peak Torque, 100 in/lb Max Continuous Torque 37″ Max Feed Rate per min, 37″ Traversing Speed per min
• Taper Length Drill Bit: 0.1654″ Dia, 130 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 669
• Downlights; Overall Width/Diameter (Decimal Inch): 7.72; Housing Type: Aluminum; Standard; Insulation Contact Rating: NonIC Rated; Lamp Type: LED; Voltage: 120; Overall Width/Diameter (Inch): 7.72
• Milling Machine Power Feed: 140 in/lb Max Peak Torque, 100 in/lb Max Continuous Torque 37″ Max Feed Rate per min, 37″ Traversing Speed per min
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-use
• 20″ Noml Height x 24″ Noml Width x 15″ Noml Depth, Synthetic Cube Air Filter 99.72% (Paint) Capture Efficiency, Galvanized Metal Frame, 500 CFM, 175°F Max, Use with Paint Booths
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-us
• ER: ER16 1″ OAL, 1″ Overall Diam
• ER: ER16 1″ OAL, 1″ Overall Diam
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 5; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-us
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use T
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use T
• Jobber Length Drill Bit: 0.7677″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 6.0236″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• ER: ER16 1″ OAL, 1″ Overall Diam
• Jobber Length Drill Bit: 0.7283″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 6.0236″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use T
• Jobber Length Drill Bit: 0.7598″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 6.0236″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.7874″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 6.0236″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Plastic Sheet: Acetal, 1/4″ Thick, Black Rockwell M-90
• ER: ER16 1″ OAL, 1″ Overall Diam
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Jobber Length Drill Bit: 0.7579″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 6.0236″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Plastic Rod: Garolite (LE), 1' Long, 1-1/8″ Dia, Brown Rockwell M-100
• Jobber Length Drill Bit: 0.7543″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 6.0236″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.75″ Dia, 142 °, Solid Carbide ALtima Plus Finish, 6.024″ OAL, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TDV; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Corner Radius End Mill: 1″ Dia, 2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 5-1/2″ OAL, 1″ Shank Dia, Variable ° Helix, EXO Coated, Centercutting End, Series 2108
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use T
• Abrasive Belt: 6" Wide, 158" OAL, 80 Grit, Aluminum Oxide
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2100; Included Angle: 90.00; Minor Diameter: 0.210; Cutting Diameter (mm): 5.33; Minimum Width: 0.210; Finish/Coating: Bright/Uncoated; Overall Length (Inch): 2
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TDV; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Jobber Length Drill Bit: 0.1614″ Dia, 140 &deg N/A Carbide RH Cut, Spiral Flute, Series DC175-05-A1
• Safety Goggles: Chemical Splash Dust & Particulates, Anti-Fog, Clear Polycarbonate Lenses Indirect Vent, Blue Frame, Size Universal
• Profiling Insert: N123F1 S205, Solid Carbide 0.0591″ Corner Radius, Series CoroCut 1-2
• Square End Mill: 1'' Dia, 2-5/8'' LOC, 1'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Profiling Insert: N123F1 S205, Solid Carbide 0.0625″ Corner Radius, Series CoroCut 1-2
• Square End Mill: 1'' Dia, 3'' LOC, 1'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Safety Goggles: Chemical Splash Dust & Particulates, Anti-Fog, Clear Polycarbonate Lenses Indirect Vent, Gray Frame, Size Universal
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Jobber Length Drill Bit: 0.4646″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.4016″ Dia, 140 °, Solid Carbide TiAlSiN, TiSiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Dial Drop Indicator: 1″ Range, 0-100 Dial Reading, 0.0004″ Graduation Lug Back, ±0.0004″ Accuracy
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: CCTV Cameras; Material: Steel; Material: Steel; For Use With: CCTV Cameras; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Hex Head Cap Screw: 3/8-16 x 1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Hex Head Cap Screw: 5/16-18 x 2-3/4″, Grade 9 Alloy Steel, Zinc-Plated
• Hex Head Cap Screw: 3/4-10 x 10″, Grade L9 Steel, Zinc Yellow Dichromate Finish Partially Threaded
• Pipe Thread Plug Gage: Straight, 1/8-28
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2100; Included Angle: 90.00; Minor Diameter: 0.210; Cutting Diameter (mm): 5.33; Minimum Width: 0.210; Finish/Coating: Bright/Uncoated; Overall Length (Inch): 2
• Welded Bandsaw Blade: 7' 9″ Long, 3/8″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Welded Bandsaw Blade: 7' 9-1/2″ Long, 3/8″ Wide, 0.025″ Thick, 4 TPI Carbon Steel, Toothed Edge
• Ring Pipe Thread Gages; Thread Size: 21x16; Coating: Bright; Application: Go Gage; Includes: Short Form Certification; Traceability Certification Included: DIN 40431; Material: Tool Steel; Thread Type: PG; Thread Size (Inch): 21x16; Standards: DIN 40431;
• Standard-Duty Shock Absorber: 2 mm Rod Dia, 12.7 mm OD, 5 mm Stroke 37 mm OAL, 4.9 lb Force
• Welded Bandsaw Blade: 7' 9-1/2″ Long, 3/8″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Jobber Length Drill Bit: 0.2508″ Dia, 90 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Standard-Duty Shock Absorber: 2 mm Rod Dia, 12.7 mm OD, 5 mm Stroke, M8 x 0.75 Thread 37 mm OAL, 4.9 lb Force
• Welded Bandsaw Blade: 7' 9-1/2″ Long, 3/8″ Wide, 0.025″ Thick, 4 TPI Carbon Steel, Toothed Edge
• Modular Tool Holding System Adapter: 42 mm Projection, 49.7 mm Body Dia, Through Coolant
• Diamond Pattern Router Bit: 30 mm LOC, 10 mm Shank Dia, Square Micro Grain Carbide, Diamond Finish
• Spiral Flute Tap: 1-3/8-6, UNC, 4 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 7.874″ OAL, Right Hand Flute, Right Hand Thread, H6, Series CU50C310
• Diamond Pattern Router Bit: 1″ LOC, 3/8″ Shank Dia, Drill Point 3″ OAL, Micro Grain Carbide, Diamond Finish
• Square End Mill: 3/4'' Dia, 4'' LOC, 3/4'' Shank Dia, 6-1/2'' OAL, 3 Flutes, Solid Carbide Single End, ANF Finish, Helical Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series A345
• Roughing End Mill
• Water-Activated Patented Flood Barrier 10' 1/Pack
• Extra Length Drill Bit: 0.0787″ Dia, 130 °, High Speed Steel Uncoated, 3.346″ Flute Length, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Cut & Puncture Resistant Sleeves: Size L, Dyneema & HPPE, Gray, ANSI Cut A4 Thumb Hole, Knit Wrist Closure, Plain, Use for Food Handling, Metal Handling, Poultry Processing & Glass Handling
• Coalescing Filters; Filter Type: Coalescing Filter; Maximum Working Pressure (psi): 250 psi; Port Size: 1/2; Bowl Material: Metal; Width (Decimal Inch): 1.97 in; Height (Inch): 250 psi; Micron Rating: 0.01 ™m; Cubic Feet Per Minute: 33.9; Overall Height:
• Abrasive Belt: 6" Wide, 158" OAL, 120 Grit, Aluminum Oxide
• Cut & Puncture Resistant Sleeves: Size M, Dyneema & HPPE, Gray, ANSI Cut A4 Thumb Hole, Knit Wrist Closure, Plain, Use for Food Handling, Metal Handling, Poultry Processing & Glass Handling
• Cut & Puncture Resistant Sleeves: Size XL, Dyneema & HPPE, Gray, ANSI Cut A4 Thumb Hole, Knit Wrist Closure, Plain, Use for Food Handling, Metal Handling, Poultry Processing & Glass Handling
• 5″ Dia, 180 Grit, Aluminum Oxide Fine Grade, C-Weighted, Paper Backing
• 5″ Dia, 320 Grit, Aluminum Oxide Very Fine Grade, C-Weighted, Paper Backing
• Analog Thread Depth Gages; Thread Size (Inch - 0 Decimals): 1/4 -28; Thread Standard: UNF; Class Of Fit: 2B; Overall Length: 7.00; Material: Tool Steel; Standards: ASME B1.2
• Tactical Gloves: Size XL Black, Padded Palm Grip
• Tactical Gloves: Size 2XL Black, Padded Palm Grip
• Tactical Gloves: Size L Black, Padded Palm Grip
• Threaded Ring Gage: M76 x 3.00 Thread, Metric, Class 4H, Go
• Tactical Gloves: Size S Black, Padded Palm Grip
• Threaded Ring Gage: M76 x 1.00 Thread, Metric, Class 4H, Go
• Tactical Gloves: Size M Black, Padded Palm Grip
• Threaded Ring Gage: M82 x 1.50 Thread, Metric, Class 4H, Go
• Closed Cell EPDM Foam: 12″ Wide, 24″ Long, Black Acrylic Adhesive Backing
• Threaded Ring Gage: M82 x 1.50 Thread, Metric, Class 6H, Go
• Threaded Ring Gage: M76 x 3.00 Thread, Metric, Class 6H, Go
• Threaded Ring Gage: M76 x 1.00 Thread, Metric, Class 6H, Go
• Work & General Purpose Gloves
• Threaded Ring Gage: M82 x 1.50 Thread, Metric, Class 6H, No Go
• Threaded Ring Gage: M76 x 1.00 Thread, Metric, Class 6H, No Go
• Threaded Ring Gage: M76 x 3.00 Thread, Metric, Class 6H, No Go
• Die Drill Bit: 0.2441″ Dia, 135 °, Solid Carbide Coated, Series 200
• Packing Tape: 2-3/4″ Wide, 150 yd Long, Natural, Water-Activated Adhesive Kraft Paper, 6.9 mil Thick
• Analog Thread Depth Gages; Thread Size (mm): M8x1.25; Thread Standard: M; Class Of Fit: 6H; Overall Length: 5.00; Material: Tool Steel; Standards: DIN ISO 1502
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1/2″ Thick, Blue Shore D-70
• 1/4-20 Knurled Shoulderless Dog Point Tip Grade 18-8 Stainless Steel Thumb Screw 2-13/16″ OAL, 1″ Head Diam x 5/16″ Head Height
• Corner Radius End Mill: 1″ Dia, 1-1/4″ LOC, 1/4″ Radius, 3 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series CoroMill Dura
• Hard Hat: Class E, 4-Point Suspension Green, HDPE, Slotted
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Plastic Bar: Garolite, 1″ Thick, Brown Rockwell M-100
• Square End Mill: 3/4'' Dia, 3'' LOC, 3/4'' Shank Dia, 6'' OAL, 5 Flutes, Solid Carbide Single End, Duarise Finish, 0 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Plastic Bar: Garolite, 1″ Thick, Brown Rockwell M-100
• Square End Mill: 1'' Dia, 1-1/4'' LOC, 1'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, ANF Finish, Helical Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series AN345
• Sheet: Buna-N Rubber, 6″ Wide, 12″ Long, Black Durometer 70, Plain Backing
• White Double-Sided Polyethylene Foam Tape: 24 mm Wide, 66 m Long, 31.25 mil Thick, Rubber Adhesive
• White Double-Sided Polyethylene Foam Tape: 18 mm Wide, 66 m Long, 31.25 mil Thick, Rubber Adhesive
• Plastic Sheet: Acetal, 3/8″ Thick, Off-White Rockwell M-90
• Extra Length Drill Bit: 0.1874″ Dia, 118 °, High Speed Steel Oxide Finish, 7.88″ Flute Length, Spiral Flute, Straight-Cylindrical Shank, Series A125
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M36x3.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Additio
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 20' Long x 16' Wide, 5 mil Polyethylene, Rectangle
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: No Go; Thread Size: M36x4.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Additio
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 20' Long x 16' Wide, 5 mil Polyethylene, Rectangle
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M36x3.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Additional
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 20' Long x 16' Wide, 5 mil Polyethylene, Rectangle
• Thread Setting Go/No Go Gages; Type: Taperlock Hilo Setting Plug Gage; Go/No Go: Go; Thread Size: M36x4.00; Classification: 6G; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: Metric; Handle Size: 5; Additional
• Tire Accessories; Type: Emergency Chains; For Tire Size: 25″-36''; For Use With: Heavy Equipment; Container Size: Kit; Additional Information: 21 links of 10mm x 35mm chain, (2) 11mm x 60mm hooks; 33.75″ overall length with hooks; For Use With: Heavy Equi
• Press Fit Headless Drill Bushing: HM, 6″ ID Steel
• Hex Head Cap Screw: 1/2-13 x 8″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Press Fit Headless Drill Bushing: HM, 5.9″ ID Steel
• #6 Stud, 26 to 24 AWG Compatible, Partially Insulated, Crimp Connection, Standard Fork Terminal Nylon Insulation, Yellow
• Press Fit Headless Drill Bushing: HM, 5.8″ ID Steel
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/2″ Thick, Black Shore D-70
• Jobber Length Drill Bit: 0.689″ Dia, 140 °, Solid Carbide AlCrN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/2″ Thick, Black Shore D-70
• Abrasive Belt: 6" Wide, 148" OAL, 80 Grit, Aluminum Oxide
• Press Fit Headless Drill Bushing: HM, 5.25″ ID Steel
• Press Fit Headless Drill Bushing: HM, 5.7″ ID Steel
• Tank Flanges; Overall Height (Inch): 1-5/16
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 2-1/2″ Usable Length 4.08″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Analog Thread Depth Gages; Thread Size (Inch - 0 Decimals): 1/4-20; Thread Standard: UNC; Class Of Fit: 2B; Overall Length: 7.00; Material: Tool Steel; Standards: ASME B1.2
• Hex Head Cap Screw: 3/8-16 x 2-1/2″, Grade 17-4PH Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• Hex Head Cap Screw: 1/2-13 x 2″, Grade 17-4PH Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• Threaded Ring Gage: M95 x 2.00 Thread, Metric, Class 6G, Go
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2060; Included Angle: 90.00; Minor Diameter: 0.206; Cutting Diameter (mm): 5.23; Minimum Width: 0.206; Finish/Coating: Bright/Uncoated; Overall Length (Inch): 2
• Spot Welder Tips; Tip Type: Double Bend Tip A Nose (Pointed); Material: RWMA Class 2 - C18200; Type: Double Bend Tip A Nose (Pointed)
• Threaded Ring Gage: M95 x 2.00 Thread, Metric, Class 6G, No Go
• Ball End Mill Heads; Mill Diameter (mm): 15.88; Mill Diameter (Decimal Inch): 0.6250; Number of Flutes: 2; Length of Cut (mm): 12.0000; Length of Cut (Inch): 0.4724; Connection Type: Duo-Lock 16; Overall Length (mm): 20.0000; Overall Length (Inch): 0.7874
• Corner Radius End Mill Head: 3 Flutes Solid Carbide
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2060; Included Angle: 90.00; Minor Diameter: 0.206; Cutting Diameter (mm): 5.23; Minimum Width: 0.206; Finish/Coating: Bright/Uncoated; Overall Length (Inch): 2
• Soap: 1 gal Bottle Liquid, Blue, Spring Water Scent
• Corner Radius End Mill: 0.9843″ Dia, 4 Flutes, Solid Carbide Helix, Bright/Uncoated, Corner Radius End, Series ALSB
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 12.50; Maximum Range (mm): 13.00
• Side Chip Saw: 8″ Blade Dia, 1/8″ Blade Thickness, 1-1/2″ Arbor Hole Dia, 48 Teeth, High Speed Steel Uncoated, Straight Tooth
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2060; Included Angle: 90.00; Minor Diameter: 0.206; Cutting Diameter (mm): 5.23; Minimum Width: 0.206; Finish/Coating: Bright/Uncoated; Overall Length (Inch): 2
• ER20 Spanner Wrench For Use with ER Spanner Nuts
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 15.50; Maximum Range (mm): 16.00
• Rotary Tool Holder Coolant Tube 12mm Bolt, 11-1/2″ Collar, 36.5mm Long, Compatible with HSK Holders Spindles, HSK63, M18x1
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 11.00; Maximum Range (mm): 11.50
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 11/16-24; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Addi
• Collet Racks & Trays; Collet Series: ER16; Number of Collets Held: 12; Material: Foam; Overall Length: 11.5442 in; Overall Width: 1.5366 in; Overall Height: 0.8668 in; Length (Inch): 11.5442 in; Height (Decimal Inch): 0.8668; Height (Inch): 0.8668 in; Len
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 14.00; Maximum Range (mm): 14.50
• Pipe Thread Plug Gage: Straight, 1-11-1/2, Double End
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 14.50; Maximum Range (mm): 15.00
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 13/16-20; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Addi
• Plastic Sheet: Nylon 6/6, 3/4″ Thick, 6″ Long, Off-White, 10,000 psi Tensile Strength Rockwell M-85
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 18.50; Maximum Range (mm): 19.00
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 13/16-20; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Addi
• Dead Centers; Center Type: Half Center; Shank Type: Morse Taper; Shank Taper Size: MT3; Point Style: Center; Carbide-Tipped: No; Head Diameter (Decimal Inch): 0.9500; Overall Length (mm): 125.00; Included Angle: 60; Overall Length: 125 mm
• Thread Setting Go/No Go Gages; Type: Truncated Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: 11/16-24; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNEF; Handle Size: 3; Addi
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 16.50; Maximum Range (mm): 17.00
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2100; Included Angle: 90.00; Minor Diameter: 0.210; Cutting Diameter (mm): 5.33; Minimum Width: 0.210; Finish/Coating: Bright/Uncoated; Overall Length (Inch): 2
• Taper Length Drill Bit: 0.5625″ Dia, 118 ° Black Oxide Finish, 4.875″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2100; Included Angle: 90.00; Minor Diameter: 0.210; Cutting Diameter (mm): 5.33; Minimum Width: 0.210; Finish/Coating: Bright/Uncoated; Overall Length (Inch): 2
• 1″ Diam 6-Flute 35/38° Solid Carbide 0.03″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• Abrasive Belt: 6" Wide, 148" OAL, 120 Grit, Aluminum Oxide
• 1″ Diam 6-Flute 35/38° Solid Carbide 0.03″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• Turning Insert: WCMT431RP4 WPP20G, Carbide
• #8-32, 0.812″ OAL, 3/8″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 0.437″ Body Length, 3/8″ Thread Length, 1/4″ Thread Depth, Grade 12L14, Zinc-Plated
• 1″ Diam 6-Flute 35/38° Solid Carbide 0.09″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• Abrasive Belt: 6" Wide, 164" OAL, 100 Grit, Aluminum Oxide
• 1″ Diam 6-Flute 35/38° Solid Carbide 0.12″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 22.00; Maximum Range (mm): 22.50
• 8' Cable Length, 1 Lockout Points, Cable Lockout Nylon Cable, Nylon Sleeve
• 1″ Diam 6-Flute 35/38° Solid Carbide 0.12″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 21.50; Maximum Range (mm): 22.00
• 1″ Diam 6-Flute 35/38° Solid Carbide 0.09″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• 1″ Diam 6-Flute 35/38° Solid Carbide 0.06″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• Abrasive Belt: 6" Wide, 144" OAL, 100 Grit, Aluminum Oxide
• 1″ Diam 6-Flute 35/38° Solid Carbide 0.06″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 2″ LOC, 5″ OAL, 1″ Shank Diam, Centercutting, Standard Length
• Abrasive Belt: 6" Wide, 144" OAL, 80 Grit, Aluminum Oxide
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2060; Included Angle: 90.00; Minor Diameter: 0.206; Cutting Diameter (mm): 5.23; Minimum Width: 0.206; Finish/Coating: Bright/Uncoated; Overall Length (Inch): 2
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2060; Included Angle: 90.00; Minor Diameter: 0.206; Cutting Diameter (mm): 5.23; Minimum Width: 0.206; Finish/Coating: Bright/Uncoated; Overall Length (Inch): 2
• Sheet: Neoprene Rubber, 12″ Wide, 12″ Long, Black Durometer 80, Acrylic Adhesive Backing
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 80, Acrylic Adhesive Backing
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 24.50; Maximum Range (mm): 25.00
• Jobber Length Drill Bit: 0.5039″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Jobber Length Drill Bit: 0.4921″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 20.00; Maximum Range (mm): 20.50
• Jobber Length Drill Bit: 0.5118″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 19.50; Maximum Range (mm): 20.00
• Jobber Length Drill Bit: 0.5″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Taper Length Drill Bit: 0.2210″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Jobber Length Drill Bit: 0.4844″ Dia, 135 °, Solid Carbide Ti-NAMITE-A Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 143M
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 16.00; Maximum Range (mm): 16.50
• Water-Activated Patented Flood Barrier 5' 2/Pack
• Jobber Length Drill Bit: 0.5039″ Dia, 135 °, Solid Carbide TX Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 142P
• Abrasive Belt: 6" Wide, 142" OAL, 100 Grit, Aluminum Oxide
• Jobber Length Drill Bit: 0.4921″ Dia, 135 °, Solid Carbide TX Finish, 4.8819″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 142P
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 19.00; Maximum Range (mm): 19.50
• Guhring Roughing End Mill for Tough Materials 25.00mm Diameter 25.0mm Shank 45.00mm Length of Cut 121mm Overall
• Abrasive Belt: 6" Wide, 133" OAL, 60 Grit, Aluminum Oxide
• Black Hex Bushing: 3 x 1-1/2″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 11.50; Maximum Range (mm): 12.00
• Abrasive Belt: 6" Wide, 132" OAL, 180 Grit, Aluminum Oxide
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 13.50; Maximum Range (mm): 14.00
• Electronic Outside Micrometer: 4″, Solid Carbide Measuring Face 0.00005″ Resolution, Ratchet Thimble
• Corner Radius End Mill: 1″ Dia, 4-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, AlTiCrN Coated, Corner Radius End, Centercutting, Series HS
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 8.50; Maximum Range (mm): 9.00
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 8.00; Maximum Range (mm): 8.50