Products

• Spiral Point Tap: M4 x 0.7, Metric, 3 Flutes, Plug, 6HX, HSS-E, Sirius Finish 125 mm OAL, Right Hand, D4/D5 Series 4645
• Plastic Sheet: Garolite, 3/4″ Thick, 6″ Long, Brown, 10,000 psi Tensile Strength Rockwell M-100
• Square End Mill: 1/2'' Dia, 1-1/2'' LOC, 1/2'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Cut-Resistant Gloves: Size XS, ANSI Cut A6, HPPE Black, Yellow & Gray, Palm & Fingers Coated, HPPE Back
• Double Angle Milling Cutter: 60 °, 1/4″ Cut Dia, 0.082″ Cut Width, 1/4″ Shank Dia, Solid Carbide 2″ OAL, AlTiN Coated, 4 Teeth
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, Bright/Uncoated
• Dish Detergent; Form: Liquid; Container Type: Gelpac; Container Size (Lb.): 2.43; Scent: Orange; For Use With: Dish Detergent
• Jobber Length Drill Bit: 0.2344″ Dia, 130 °, Solid Carbide Amorphous Diamond Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Reduced Shank Drill Bit: 3/4'' Dia, 1/2'' Shank Dia, 118 ™, High Speed Steel 6'' OAL, 3-1/8'' Flute Length, Coated Finish, Straight-Cylindrical Shank, RH Cut
• Jobber Length Drill Bit: 0.25″ Dia, 130 °, Solid Carbide Amorphous Diamond Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Lever Hand Pump: DEF Lubrication, Polyethylene Use with 5 lb & 55 gal Container
• Spiral Point Tap: 3/8-24, UNF, 4 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 3.937″ OAL, Left Hand, X, Series Rekord B
• Spiral Point Tap: 3/8-16, UNC, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 3.937″ OAL, Left Hand, X, Series Rekord B
• Toilet Seats; Type: Closed Front w/ Lift and Clean; Style: Round; Material: Plastic; Color: White; Outside Width: 14; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: Biscuit; Outside Width: 14; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Corner Radius End Mill: 3/8″ Dia, 1-1/4″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 50 ° Helix, nACRo Coated, Corner Radius End, Centercutting, Series SM3F
• Toilet Seats; Type: Luxury Closed Front w/ Cover and Slow Close; Style: Round; Material: Plastic; Color: Bone; Outside Width: 14; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Chucking Reamer: 0.324″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: Black; Outside Width: 14; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Silicone Tube: 7/16″ OD, 5' Length 40 Max psi, Clear
• Abrasive Belt: 6" Wide, 202" OAL, 60 Grit, Aluminum Oxide
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: White; Outside Width: 14; Inside Width: 0; Length (Inch): 16.5; Minimum Order Quantity: Plastic; Material: Plastic
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White
• Corner Radius End Mill: 3/8″ Dia, 1-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Chamfer Mill: 8 mm Dia, 4 Flutes, Solid Carbide, Corner Chamfer End 63 mm OAL, 8 mm Shank Dia, Nano-Si Coated
• Standard Battery: Size C, Lithium-ion 3.6V, Button Tab Terminal
• SpyroTec 8.3mm Head Diam, 2mm Cut Diam, 6mm Shank Diam, 3 Flute 90° High Speed Steel Countersink TiAlN Finish, Single End, 6mm Straight Shank, Right Hand Cut
• Hex Head Cap Screw: 5/16-18 x 1″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Square End Mill: 1/4'' Dia, 5/16'' LOC, 1/4'' Shank Dia, 4'' OAL, 5 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series VGM5-LN
• Taper Length Drill Bit: 0.2500″ Dia, 118 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 667
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Taper Length Drill Bit: 0.1673″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 3.50; Maximum Range (mm): 4.00
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK260; Series: PK260
• Square End Mill: 1/2'' Dia, 1-1/2'' LOC, 1/2'' Shank Dia, 3.5'' OAL, 5 Flutes, Solid Carbide Single End, Uncoated, Spiral Flute, 36 ° Helix, RH Cut, RH Flute
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 2.50; Maximum Range (mm): 3.00
• Cord Stock; Shape: Round; System of Measurement: Metric; Tensile Strength (psi): 725; Coil Length (Feet): 10; Durometer: 70; Maximum Temperature (F): 350.000; Durometer (Shore A): 70A; Standard; Hardness: Standard
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, Bright/Uncoated
• Laundry Detergent; Form: Liquid; Container Size (oz.): 150; Scent: Mountain Essence; Description: Bottle
• Square End Mill: 3/32'' Dia, 9/64'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 37 ° Variable Helix, RH Cut, RH Flute
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 3.00; Maximum Range (mm): 3.50
• Ball End Mill: 0.3438″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 3-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Double End
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Locking Inlet: Connector, Industrial, ML-2R, 125V, Black & White Self-Grounding, 15A, Composite, 2 Poles, 3 Wire
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Free Swing Heavy-Duty Concealed Hinge: Steel & Zinc Alloy, Black Nickel Finish
• Self-Closing Heavy-Duty Concealed Hinge: Steel & Zinc Alloy, Black Nickel Finish
• Self-Closing Heavy-Duty Concealed Hinge: Steel & Zinc Alloy, Black Nickel Finish
• Self-Closing Heavy-Duty Concealed Hinge: Steel & Zinc Alloy, Black Nickel Finish
• Free Swing Heavy-Duty Concealed Hinge: Steel & Zinc Alloy, Black Nickel Finish
• Free Swing Heavy-Duty Concealed Hinge: Steel & Zinc Alloy, Black Nickel Finish
• Abrasive Belt: 6" Wide, 186" OAL, 220 Grit, Aluminum Oxide
• Boring Bar
• Boring Bar: 6 mm Min Bore, 24 mm Max Depth, Right Hand Cut, Carbide 6 mm Shank Dia, 59.60 mm OAL, 0.15 mm Corner Radius
• Abrasive Belt: 6" Wide, 186" OAL, 80 Grit, Aluminum Oxide
• Hex Head Cap Screw: M24 x 3.00 x 250 mm, Grade 10.9 Steel, Zinc-Plated Partially Threaded, 36 mm Hex, DIN 931
• Turning Insert: CCGW21.52FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW21.51FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGT21.51FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: DCGW21.51FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGT21.51FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Abrasive Belt: 7" Wide, 10-23/32" OAL, 80 Grit, Aluminum Oxide
• Sheet: Silicone Rubber, 12″ Wide, 36″ Long, Semi-Clear Durometer 40, Plain Backing
• Hex Head Cap Screw: M10 x 1.50 x 100 mm, Grade 10.9 Steel, Zinc-Plated Partially Threaded, 16 mm Hex, DIN 931
• Die Drill Bit: 0.1610″ Dia, 135 °, Solid Carbide Uncoated, 5/8″ Flute, 2″ OAL, Series 200
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 2″ Thick, Black Shore D-70
• CNMG250924-RP5 WPP20S Turning Insert TiCN+Al2O3+(TiCN) Finish, Neutral, 25.79mm Long, 25.4mm Inscribed Circle, 2.4mm Corner Radius, 9.53mm Thick, 80° Rhombic 80, Series CNMG-RP5
• Nylon Tube: 1/4″ ID, 3/8″ OD, 25' Long 500 Max psi, Red
• Jobber Length Drill Bit: 0.311″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 10.00; Groove Width (mm): 1.00; Shank Diameter (mm): 10.0000; Overall Length (mm): 10.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 10.00; Projection (mm): 2.400;
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 15.00; Groove Width (mm): 1.50; Shank Diameter (mm): 15.0000; Overall Length (mm): 15.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 15.00; Projection (mm): 2.400;
• Milling Insert: WHH15X, Solid Carbide N/A Finish,
• Jackets & Coats; Garment Style: Jacket; Size: 2X-Large; Material: Cotton; Closure Type: Snaps; Flame Retardant: Yes; Number Of Pockets: 1.000; Flame Resistant: Yes
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 15.00; Groove Width (mm): 1.50; Shank Diameter (mm): 15.0000; Overall Length (mm): 15.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 15.00; Projection (mm): 2.400;
• Jackets & Coats; Garment Style: Jacket; Size: 2X-Large; Material: Cotton; Closure Type: Snaps; Flame Retardant: Yes; Number Of Pockets: 1.000; Flame Resistant: Yes
• Milling Insert: KDMT1610ERHC, KCPK10, Cast Iron & Steel N/A Finish, 0.6299″ OAW
• Standard Battery: Size C, Alkaline 1.5V, Button Tab Terminal, LR14
• Power Cords; Cord Type: Extension Cord; Overall Length (Feet): 25; Cord Color: Orange; Amperage: 13; Voltage: 125; Number Of Receptacles: 2
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Safety Pink; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Safety Pink; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 3.20; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 48; Minimum Threads Per Inch: 24; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.40; Manufactur
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 4.20; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 48; Minimum Threads Per Inch: 24; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.40; Manufactur
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Purple; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Magenta; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Silver; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Black; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Blue; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Blue; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 4.40; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 1.00; Maximum Pitch (mm): 1.00; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Safety Green; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Safety Green; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 4.20; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 48; Minimum Threads Per Inch: 24; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.40; Manufactur
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Safety Orange; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Orange; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 4.40; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 0.50; Maximum Pitch (mm): 0.50; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 3.40; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 0.70; Maximum Pitch (mm): 0.70; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Brown; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Yellow; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 4.90; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 0.50; Maximum Pitch (mm): 0.50; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Ball End Mill: 0.75″ Dia, 1.125″ LOC, 4 Flute, Solid Carbide 8″ OAL, 3/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 4.40; Cutting Depth (mm): 16.00; Minimum Pitch (mm): 0.50; Maximum Pitch (mm): 0.50; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.35; Manufacturer's Par
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Evergreen; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Evergreen; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 4.20; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 48; Minimum Threads Per Inch: 24; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.40; Manufactur
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Magenta; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Magenta; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 3.20; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 48; Minimum Threads Per Inch: 24; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.40; Manufactur
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Traffic Blue; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Traffic Blue; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 3.20; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 48; Minimum Threads Per Inch: 24; Shank Diameter (mm): 4.0000; Maximum Reach (mm): 18.40; Manufactur
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Black; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Black; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Single Point Threading Tools; Thread Type: Internal; Profile Angle: 4; Threading Diameter (mm): 3.20; Cutting Depth (mm): 16.00; Maximum Threads Per Inch: 48; Minimum Threads Per Inch: 24; Shank Diameter (mm): 6.0000; Maximum Reach (mm): 18.40; Manufactur
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: White; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: White; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Plastic Bar: Garolite, 1/16″ Thick, Yellow
• Electromagnet Lock Accessories; Type: Touchless Switch; For Use With: Interior; Exterior Doors; Material: Polycarbonate; Material: Polycarbonate; For Use With: Interior; Exterior Doors; Type: Touchless Switch; Accessory Type: Touchless Switch; Type: Touch
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Khaki Gold; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Khaki Gold; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: Fire Alarm Control Panel; Material: Steel; Material: Steel; For Use With: Fire Alarm Control Panel; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Red; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Red; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Sky Blue; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Sky Blue; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Gold; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Yellow; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Yellow; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Yellow; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Green; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Safety Green; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Spot Welder Tips; Tip Type: Backup Electrode Round Face; Material: RWMA Class 1 - C15000; Type: Backup Electrode Round Face
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Traffic Orange; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Traffic Orange; Length (Feet): 25.00; 25.000; Overall Length: 25.00
• Drywall & Hollow Wall Anchors; Thread Size (Inch): #8; Anchor Material: Nylon; Minimum Workpiece Thickness: 0.375 in; Maximum Load Capacity: 65.0 lb
• Black 90 ° Elbow: 1″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Abrasive Belt: 6" Wide, 168" OAL, 120 Grit, Aluminum Oxide
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 70, Plain Backing
• Floor Cleaner: Bottle, Use on Baseboards & Floors Hard Floor Care
• M4x0.7, 20.53mm OAL, 8mm Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 11mm Body Length, 9.53mm Thread Length, 7.1mm Thread Depth, Grade T-3, Uncoated
• Corner Radius End Mill: 1″ Dia, 4″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Flashlight Flashlight 300 Lumens, LED Bulb, Black Body,
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide Uncoated Finish, 3.0-6.0 mm & 8-4 TPI, Series 25659
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide Uncoated Finish, 3.0-6.0 mm & 8-4 TPI, Series 25658
• Taper Length Drill Bit: 0.1200″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Taper Length Drill Bit: 0.1260″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-3/8″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Desktop Copyholder: Gray & Dark Blue-Gray Use with Office Use
• Corner Radius End Mill: 1″ Dia, 4″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: SpeedLoc; Outside Diameter (Decimal Inch): 1.127 in; Inside Diameter (mm): 20 mm; Plate Thickness Tolerance: ™0.0050 in; Plate Thickness Compatibility: 2 in; Plate Thickness Tolerance (
• Corner Radius End Mill: 1″ Dia, 4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 4″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-3/8″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball Grip Quick-Release Pin: Button Handle, 5 mm Pin Dia, 90 mm Usable Length 111.1 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Corner Radius End Mill: 1″ Dia, 4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 4″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 1/8″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 1″ Dia, 4″ LOC, 4 Flute, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Closed Cell Silicone Foam: 36″ Long, Brown High Temperature Adhesive Backing
• Ball End Mill: 1″ Dia, 4 Flute, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1″ Dia, 1-1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• High Visibility Vest: 3X-Large Hi-Visibility Yellow, Zipper Closure, 3 Pocket
• M6x1.0 Coarse 16mm Long Hex Thread Cutting Screw 12L14 Steel, Hex Washer Head, Self Drilling Point, Zinc-Plated
• Spot Welder Tips; Tip Type: Straight Tip E Nose (Truncated); Material: RWMA Class 1 - C15000; Type: Straight Tip E Nose (Truncated)
• Corner Radius End Mill: 1″ Dia, 4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 7″ OAL, 1″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Screw Machine Length Drill Bit: 0.6496″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Aluminum Drop Plate For Use with LCN 4041-AL Door Closers
• Taper Length Drill Bit: 0.2795″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Abrasive Belt: 6" Wide, 168" OAL, 60 Grit, Aluminum Oxide
• Safes; Type: Personal Safe; Internal Width (Inch): 14-1/2; Internal Height (Inch): 2-1/2; Internal Depth (Inch): 11; External Width (Inch): 14-3/4; External Height (Inch): 5; External Depth (Inch): 11-1/4; UL Fire Rating (Hours): Not Rated; Cubic Feet: 0.
• Spiral Flute Tap: 1-1/4-7, UNC, 4 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 1.575″ Thread Length, 7.087″ OAL, Right Hand Flute, Right Hand Thread, H8, Series CU50C300
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• 1-5/8″ Diam, 4 Flutes, Morse Taper Shank, Interchangeable Pilot Counterbore 8-1/8″ OAL, Bright Finish, Carbide-Tipped
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK246; Series: PK246
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1″ Thick, White
• Taper Length Drill Bit: 0.1890″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• ER: ER16 1″ OAL, 1″ Overall Diam
• ER: ER16 1.0830 Inch Overall Length, 0.6700 Inch Overall Diam
• Anti-Fatigue Mat: 36.0000″ Length, 24.0000″ Wide, 5/8″ Thick, Closed Cell Polyvinylchloride, Beveled Edge, Medium Duty Pebbled, Black & Yellow, Dry
• Jobber Length Drill Bit: 0.1909″ Dia, 90 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• ER: ER16 1″ OAL, 1″ Overall Diam
• Corner Chamfer End Mill: 0.787″ Dia, 2.36″ LOC, 7 Flute, 0.4″ Chamfer Width, Solid Carbide 140 mm OAL, 20 mm Shank Dia, 37 ° Helix, TiAlN Coated, Centercutting
• ER: ER16 1″ OAL, 1″ Overall Diam
• Abrasive Belt: 6" Wide, 168" OAL, 50 Grit, Aluminum Oxide
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #2-56; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: H
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.1875; Included Angle: 90.00; Minor Diameter: 0.1875; Cutting Diameter (mm): 4.76; Cutting Diameter (Decimal Inch): 3/16; Minimum Width: .250; Finish/Coating: Bright/Uncoated; Overall Length (I
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.4750; Included Angle: 180.00; Minor Diameter: 0.25; Cutting Diameter (mm): 12.06; Minimum Width: 0.125; Finish/Coating: Uncoated; Overall Length (Inch): 2-1/2
• 48″ OAL, 3/16″ ID, 3,000 Max psi, Flexible Metal Hose Assembly 1/8″ Fitting, Male Coupling x Male Coupling End Connections, Brass Fitting, 304 Stainless Steel Hose
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #2-64; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: H
• Grooving Tool: Retaining Ring Solid Carbide, 1/8″ Shank Dia, 0.03″ Groove Width
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, TiB2 Coated, Single End
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #1-72; Classification: 3A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: H
• Sheet: Buna-N Rubber, 24″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Plastic Bar: Polycarbonate, 1/2″ Thick, Clear
• Pipe Thread Plug Gage: Tapered, 1/16-27, Double End
• Strip: Buna-N Rubber, 3/4″ Wide, 120″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #2-64; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNF; Handle Size: 000; Material: H
• Retention Knob: M10 x 1.5 Thread, 20 mm Knob Dia
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #1-64; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: H
• Thread Setting Go/No Go Gages; Type: Hilo Thread Setting Plug Gage; Go/No Go: Go/No Go; Thread Size: #2-56; Classification: 2A; Calibrated: No; Traceability Certification Included: Certificate of Compliance; Thread Type: UNC; Handle Size: 000; Material: H
• Body Wipes: Tub, 11.5 x 9.5″ Sheet, White
• Abrasive Belt: 6" Wide, 168" OAL, 60 Grit, Aluminum Oxide
• Hex Head Cap Screw: 5/16-18 x 5/8″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Abrasive Belt: 6" Wide, 158" OAL, 100 Grit, Aluminum Oxide
• Hex Lock Nut: 5/16-18, Grade 9 Steel, Cadmium-Plated with Wax 0.263″ High, 1/2″ Width Across Flats, Right Hand Thread
• Analog Thread Depth Gages; Thread Size (Inch - 0 Decimals): #1-64; Thread Standard: UNC; Class Of Fit: 2B; Overall Length: 5.00; Material: Tool Steel; Standards: ASME B1.2
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 25' Long x 12' Wide, 5 mil Polyethylene, Rectangle
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: CCTV Cameras; Material: Steel; Material: Steel; For Use With: CCTV Cameras; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 25' Long x 12' Wide, 5 mil Polyethylene, Rectangle
• Electromagnet Lock Accessories; Type: Power Supply; For Use With: CCTV Cameras; Material: Steel; Material: Steel; For Use With: CCTV Cameras; Type: Power Supply; Accessory Type: Power Supply; Type: Power Supply
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 25' Long x 12' Wide, 5 mil Polyethylene, Rectangle
• Traffic Barrels, Delineators & Posts; Type: Channelizing Cone; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Height (Inch): 50.4; Width (Inch): 7-3/4; Additional Information: Series: 650R1; Dimensions: 42 in Without Handle; Sheeting Grade: Hi
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 20' Long x 15' Wide, 5 mil Polyethylene, Rectangle
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 20' Long x 15' Wide, 5 mil Polyethylene, Rectangle
• Square End Mill: 1'' Dia, 2-1/4'' LOC, 1'' Shank Dia, 5'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 20' Long x 15' Wide, 5 mil Polyethylene, Rectangle
• Black 90 ° Elbow: 1/2″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Household Trash Bag: 13 gal, 0.9 mil, Pack of (120) 24″ Wide, 27.75″ High, Plastic, White
• Square End Mill: 1'' Dia, 1-1/2'' LOC, 1'' Shank Dia, 5'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Square End Mill: 1'' Dia, 3'' LOC, 1'' Shank Dia, 6'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 35 ° Helix, Centercutting, RH Cut, Series SAP-NB
• Grooving Tool
• Guhring Optimized Roughing End Mill for Aluminum 20.00mm Diameter 20.0mm Shank 38.00mm Length of Cut 126mm Overall
• 150 Grit Silicon Carbide Square Polishing Stone Very Fine Grade, 5/32″ Wide x 4″ Long x 5/32″ Thick
• 220 Grit Silicon Carbide Square Polishing Stone Very Fine Grade, 5/32″ Wide x 6″ Long x 5/32″ Thick
• 180 Grit Aluminum Oxide Rectangular Polishing Stone Very Fine Grade, 1/4″ Wide x 4″ Long x 1/16″ Thick
• 320 Grit Silicon Carbide Square Polishing Stone Extra Fine Grade, 5/32″ Wide x 6″ Long x 5/32″ Thick
• Die Drill Bit: 0.2420″ Dia, 140 °, Solid Carbide Uncoated, 1-1/4″ Flute, 2-1/2″ OAL, Series 195
• 15/32″ Diam 4-5/16″ Flute Length 135° High Speed Steel Aircraft Extension Drill Oxide Finish, Straight-Cylindrical Shank, Split Point, Self-Centering
• Black 90 ° Street Elbow: 1″, Threaded Steel, Black Finish, Class 3000, ANSI/ASME B1.20.1, ANSI/ASME B16.11-MSS SP-83 & ASTM A105
• Strip: Buna-N Rubber, 3/4″ Wide, 120″ Long, Black Durometer 80, Plain Backing
• Strip: Buna-N Rubber, 1-1/2″ Wide, 120″ Long, Black Durometer 80, Plain Backing
• Jacket: Fire-Resistant & Welding, Size 2X-Large, Cotton Green, Unisex, Snaps Closure, 28.75″ Chest, 1 Pocket
• Anchor Accessories; Accessory Type: Driver for Pivot Hangermate; For Use With: Hangermate; Material: Steel
• Jacket: Fire-Resistant & Welding, Size X-Large, Cotton Green, Unisex, Snaps Closure, 26.75″ Chest, 1 Pocket
• Collet Coolant Seals; Collet Series: ER20; Minimum Range: 0.2170 in; Maximum Range: 0.2360 in
• Collet Coolant Seals; Collet Series: ER20; Minimum Range: 0.2760 in; Maximum Range: 0.2950 in
• Collet Coolant Seals; Collet Series: ER20; Minimum Range: 0.3350 in; Maximum Range: 0.3540 in
• Jobber Length Drill Bit: 0.2756″ Dia, 140 °, Solid Carbide Bright/Uncoated, 3.6024″ OAL, Right Hand Cut, Straight Flute, Straight-Cylindrical Shank
• Abrasive Belt: 6" Wide, 158" OAL, 80 Grit, Aluminum Oxide
• Collet Coolant Seals; Collet Series: ER20; Minimum Range: 0.3740 in; Maximum Range: 0.3940 in
• Abrasive Belt: 6" Wide, 88-3/8" OAL, 36 Grit, Zirconia Alumina
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.4500; Included Angle: 180.00; Minor Diameter: 0.25; Cutting Diameter (mm): 11.43; Minimum Width: 0.125; Finish/Coating: Uncoated; Overall Length (Inch): 2-1/2
• Charging Handle Slot Cutters; Cutter Diameter (Decimal Inch): 0.5060; Roughing: No; Slot Width (Decimal Inch): 0.1270; Helix Angle: 30.00; Number Of Flutes: 4; Material: Solid Carbide
• NEMA 1, 4, 4X, 12 Polycarbonate Standard Enclosure with Screw Cover 3.9mm Wide x 5.5mm High x 3.9mm Deep, Corrosion, Impact & Moisture Resistant, Dust-tight, Rainproof & Watertight
• Side Chip Saw: 6″ Blade Dia, 5/32″ Blade Thickness, 1-1/4″ Arbor Hole Dia, 40 Teeth, Cobalt TiN Finish, Staggered Tooth
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 36 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series H1TE
• Picatinny Rail Form Cutters; Cutter Diameter (Decimal Inch): 0.2300; Included Angle: 100.00; Minor Diameter: 0.140; Cutting Diameter (mm): 5.84; Minimum Width: 0.080; Finish/Coating: Bright/ Uncoated; Overall Length (Inch): 2
• Corner Radius End Mill: 1″ Dia, 2-1/4″ LOC, 0.12″ Radius, 4 Flutes, Solid Carbide 5″ OAL, 1″ Shank Dia, 36 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series H1TE
• Electromagnet Locks; Average Magnetic Pull (Lb.): 1200.000; 1200.0 lb; Timer: Yes; LED: No; Finish: Aluminum; Features: Bond Sensor, Relock Time Delay; Finish/Coating: Aluminum; Led Included: No; Average Magnetic Pull: 1200.0 lb
• Side Chip Saw: 8″ Blade Dia, 1/4″ Blade Thickness, 1-1/2″ Arbor Hole Dia, 48 Teeth, High Speed Steel Uncoated, Staggered Tooth
• Pipe Thread Plug Gage: Straight, 2-1/2-8
• Work & General Purpose Gloves
• 24 VAC Vertical Float Switch Primary Condensate Overflow Safety Switch Pump, Flame Retardent ABS Housing, 6' Cord, For Use with Universal
• Pipe Thread Plug Gage: Straight, 2-1/2-8
• Work & General Purpose Gloves
• Grinding Pins; Abrasive Head Diameter (Inch): 1/4; Abrasive Head Thickness (Inch): 3/4; Abrasive Material: Diamond; Grit: 40; Grade: Extra Coarse; Head Length: 0.75 in; Head Shape: Ball Nose
• Indexable Drill Insert: LOGT06NDJ AH725, Carbide Coated, 100 ° Proprietary
• 5″ Dia, 240 Grit, Aluminum Oxide Fine Grade, C-Weighted, Paper Backing
• 5″ Dia, 150 Grit, Aluminum Oxide Fine Grade, C-Weighted, Paper Backing