Products

• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: SpeedLoc; Outside Diameter (Decimal Inch): 1.7523 in; Inside Diameter (mm): 35 mm; Plate Thickness Tolerance: ™0.0050 in; Plate Thickness Compatibility: 1 in; Plate Thickness Tolerance
• Sillcocks; Type: Hose Bibb Faucet; Pipe Size: 3/4; End Connections: Compression; WOG Rating (psi): 125; Handle Type: Handwheel; Minimum Order Quantity: Bronze; Connection: Compression to Compression; Material: Bronze
• Taper Length Drill Bit: 0.1285″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Taper Length Drill Bit: 118 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5536
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.2500; Drill Bit Size (Inch): 0.2500; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Four Facet; Overall Length (Decimal Inch): 2.1250; Overall Length (Decim
• Plastic Bar: Acrylonitrile Butadiene Styrene, 1″ Thick, Beige Rockwell R-105
• Sleeves: Size L, Kevlar, Black Elastic Opening at Both Ends Closure
• Plastic Sheet: Garolite, 1/8″ Thick, Brown, 16,000 psi Tensile Strength Rockwell M-100
• 8 oz Spray Bottle White, Polyethylene, Propropylene
• Plastic Sheet: Garolite, 1/8″ Thick, Brown, 16,000 psi Tensile Strength Rockwell M-100
• Pipe Fitting: 1-1/4 x 1-1/4″ Fitting, 316 Stainless Steel 150 psi
• Welding Hose Fittings; Type: Hex Nipple; Material: 316 Stainless Steel; Connection Type: Threaded
• Face Shield Windows & Screens: Face Shield, Clear, 13.7″ High ANSI/ISEA Z87.1-2015
• Deadbolts; Deadbolt Type: Deadbolt; Lock Type: Keyless; Key Type: Keyless; Mount Type: Through Hole; Material: Steel; Minimum Door Thickness: 1.75 in; Maximum Door Thickness: 2.25; Finish: Oil Rubbed Dark Bronze
• Hex Head Cap Screw: 3/8-16 x 2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• M3x0.50, 10.76mm OAL, 4.5mm Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 6mm Body Length, 4.76mm Thread Length, 2.8mm Thread Depth, Grade 6/6, Uncoated
• #4 Screw 7/8″ OAL 0.115″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• #8 Screw 7/8″ OAL 0.166″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• #2 Screw 7/8″ OAL 0.09″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• Taper Length Drill Bit: 0.2283″ Dia, 118 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 317
• Taper Length Drill Bit: 0.1280″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Taper Length Drill Bit: 0.1732″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Taper Length Drill Bit: 0.1319″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Closed Cell Viton Foam: 56″ Long, Black High Temperature Adhesive Backing
• High Temperature Masking Tape: 2″ Wide, 60 yd Long, 6.7 mil Thick, Green Crepe Paper, Natural Synthetic Rubber Adhesive, 25 lb/in Tensile Strength
• Household Trash Bag: 30 gal, 1.05 mil, Pack of (90) 30″ Wide, 33″ High, Plastic, Black
• Plastic Bar: Acetal, 1/8″ Thick, Black Rockwell M-90
• Size XL Navy Blue General Purpose Long Sleeve Button Down Shirt 54″ Chest, 2 Pockets, Cotton
• Sheet: Neoprene Rubber, 6″ Wide, 12″ Long, Black Durometer 40, Plain Backing
• Size M Navy Blue General Purpose Long Sleeve Button Down Shirt 46″ Chest, 2 Pockets, Cotton
• Size L Navy Blue General Purpose Long Sleeve Button Down Shirt 50″ Chest, 2 Pockets, Cotton
• Extra Length Drill Bit: 0.315″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Taper Length Drill Bit: 0.2874″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Sheet: Buna-N Rubber, 6″ Wide, 12″ Long, Black Durometer 40, Plain Backing
• Anti-Fatigue Mat: 3' Length, 2' Wide, 9/16″ Thick, Polyvinylchloride & Vinyl Pebbled, Gray, Dry
• Pipe 90 ° Male Elbow: 1/4″ Fitting, 316 Stainless Steel MNPT x MNPT, Threaded, ANSI/ASME B31.1, ANSI/ASME B31.3 & ANSI/ASME B1.20.1, 7,500 psi
• Micro Drill Bit: 0.0256″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Speed Bumps, Parking Curbs & Accessories; Type: Premium Textured Speed Hump End Cap Female; Length (Inch): 10; Width (Inch): 35; Height (Inch): 2; Color: Black; Material: Recycled Rubber
• Speed Bumps, Parking Curbs & Accessories; Type: Premium Textured Speed Hump End Cap Male; Length (Inch): 10; Width (Inch): 35; Height (Inch): 2; Color: Black; Material: Recycled Rubber
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Blue Lenses, Full-Framed Black Frame
• Welding Hose Fittings; Type: Hex Nipple; Material: 316 Stainless Steel; Connection Type: Threaded
• Micro Drill Bit: 0.0217″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0197″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0236″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• 1-8 Thread, 4-1/2″ Length Under Head, Hex Head Bolt Grade B7 Alloy Steel, Uncoated
• Micro Drill Bit: 0.0276″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: Internal Solid Carbide
• Micro Drill Bit: 0.0291″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0287″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Raceway Fittings & Accessories; Overall Length: 1.0000 in; Overall Width: 8 in; Overall Height: 8 in; For Use With: S and HS Series Wireway; Overall Length (Decimal Inch): 1.0000 in; Overall Length (Feet): 1.0000 in; Overall Length (Inch): 1.0000 in; Over
• Micro Drill Bit: 0.0283″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.028″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0272″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0268″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0264″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.026″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0252″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0248″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0244″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.024″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0232″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0228″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0224″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0213″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.022″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Threaded Rod: 5/8-18, 72″ Long, Alloy Steel, Grade B7 Inch Thread, 1A, Right Hand Thread
• Micro Drill Bit: 0.0209″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0205″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.0201″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Ball Grip Quick-Release Pin: T-Handle, 1/4″ Pin Dia, 1-3/4″ Usable Length 3″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Grooving Tool: Internal Solid Carbide
• Ball Grip Quick-Release Pin: T-Handle, 1/4″ Pin Dia, 2″ Usable Length 3-1/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Lawn Sprinklers; Type: Sprinkler; Thread Size: 3/4; Base Style: Spike; Travelling Sprinkler: No; Spray Pattern: Circular; Description: Impact
• Trash Bag: 0.8 mil 40″ Wide, 46″ High, Polyethylene
• 320 Grit Aluminum Oxide Square Polishing Stone Extra Fine Grade, 1/2″ Wide x 6″ Long x 1/2″ Thick
• 12.4mm Head Diam, 5/16″ Shank Diam, 90° Cobalt Countersink 2-1/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Combo Drill & Countersink: #6, 1/2″ Body Dia, 118 ™, High Speed Steel TiN Finish, 7/32″ Point Dia, 3″ OAL, Right Hand Cut
• Reduced Shank Drill Bit: 21/32'' Dia, 1/2'' Shank Dia, 118 ™, High Speed Steel 6'' OAL, 3'' Flute Length, Bright/Uncoated Finish, Weldon Shank, RH Cut, Series R57
• Taper Length Drill Bit: 0.1654″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Hex Head Cap Screw: 1/4-20 x 1-1/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Household Trash Bag: 30 gal, 1.05 mil, Pack of (40) 30″ Wide, 33″ High, Plastic, Black
• Ball End Mill: 0.031″ Dia, 0.187″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 0.035'' Dia, 0.105'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Pipe Tee: 1/4″ Fitting, 304 Stainless Steel MNPT x FNPT x FNPT, Threaded, ASME B1.20.1, ASME B16.11-ANSI & ASTM A182-ANSI, 3,000 psi
• Square End Mill: 0.025'' Dia, 0.075'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Extra Length Drill Bit: 0.1575″ Dia, 130 °, Cobalt Uncoated, 4.724″ Flute Length, 6.89″ OAL, Parabolic Flute, Straight-Cylindrical Shank, Series 618
• Corner Radius End Mill: 0.0433″ Dia, 0.1181″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0472″ Dia, 0.0709″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0551″ Dia, 0.0827″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0472″ Dia, 0.1378″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0551″ Dia, 0.1575″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0315″ Dia, 0.0945″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0512″ Dia, 0.1575″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Vibration-Control Clamp
• Corner Radius End Mill: 0.0354″ Dia, 0.1063″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: SpeedLoc; Outside Diameter (Decimal Inch): 1.7523 in; Inside Diameter (mm): 30 mm; Plate Thickness Tolerance: ™0.0050 in; Plate Thickness Compatibility: 0.75 in; Plate Thickness Toleran
• Corner Radius End Mill: 0.1406″ Dia, 0.425″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Air Cylinder Accessories; Type: Foot Mounts; Accessory Type: Foot Mounts; For Use With: Cylinder; Material: Aluminum; Bore Size: 25; Bore Size: 25
• Coolant Adapters & Collars For Indexables; Type: Coolant Nozzle; Indexable Tool Type: Toolholder; Toolholder Style Compatibility: JETI-VDI; Series: JETI; Toolholder Style Compatibility: JETI-VDI; Product Type: Coolant Nozzle
• Corner Radius End Mill: 3/32″ Dia, 0.67″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Wall & Dimmer Light Switches; Switch Type: NonDimmer; Switch Operation: Toggle; Color: Clear; Color: Clear; Grade: Industrial; Number of Poles: 1; Amperage: 20 A; Voltage: 120 V; Number Of Poles: 1; Amperage: 20 A; 20; Voltage: 120 V; Includes: Terminal S
• Plastic Sheet: Garolite, 1/2″ Thick, 6″ Long, Brown, 10,000 psi Tensile Strength Rockwell M-100
• Corner Radius End Mill: 1/16″ Dia, 7/16″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Square End Mill: 0.0984'' Dia, 0.1181'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 1/32'' Dia, 0.045'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Ball End Mill: 0.125″ Dia, 0.5″ LOC, 2 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Square End Mill: 3/32'' Dia, 1/2'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 9/64″ Dia, 0.425″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Square End Mill: 5/32'' Dia, 5/8'' LOC, 3/16'' Shank Dia, 3'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Ball End Mill: 0.0625″ Dia, 0.25″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Plastic Bar: Acetal, 1/2″ Thick, Black Rockwell M-90
• Sheet: Neoprene Rubber, 6″ Wide, 6″ Long, Black Durometer 40, Plain Backing
• Plastic Bar: Acetal, 1-1/4″ Thick, White
• Corner Radius End Mill: 0.0315″ Dia, 0.0472″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0394″ Dia, 0.1181″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Utility Utility Cart: 18" Long, 24" Wide, Recycled Molded Plastic, 300 lb Capacity, Gray
• Plastic Bar: Acetal, 1/2″ Thick, White
• Corner Radius End Mill: 0.0197″ Dia, 0.0276″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Plastic Bar: Acetal, 1/2″ Thick, White
• Welding Hose Fittings; Type: Hex Nipple; Material: 316 Stainless Steel; Connection Type: Threaded
• Spiral Flute Tap: M5 x 0.80, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Spiral Flute Tap: M5 x 0.80, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Plastic Bar: Acetal, 1/8″ Thick, Black Rockwell M-90
• Sheet: Buna-N Rubber, 6″ Wide, 6″ Long, Black Durometer 40, Plain Backing
• Closed Cell Silicone Foam: 12″ Wide, 12″ Long, Red Plain Backing
• Plastic Bar: Acetal, 1/8″ Thick, White
• Plastic Bar: Acetal, 1/8″ Thick, White
• Sheet Gasketing; Width (Inch): 12; Thickness: 1/8; Length (Inch): 12.0000; Color: Brown; Material: Cork with Buna-N Rubber Blend; Length (Inch): 12; Grade: Firm; Minimum Temperature (F): 0.000; Backing Type: Adhesive; Material: Cork with Buna-N Rubber Ble
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Adjusting Elements For Indexables; Indexable Tool Type: Face Milling Cutter; Complete Toolholder Compatibility: R220.48-09
• Size L Hi-Vis Yellow High Visibility Long Sleeve T-Shirt Polyester
• Size 5XL Hi-Vis Yellow High Visibility Long Sleeve T-Shirt Polyester
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 7.0000; Outside Diameter: 11.0000; Wall Thickness (mm): 2.00; Material: PVC; Standard Coil Length (Feet): 25; Maximum Working Pressure (psi): 30; Hardness: 70A; Special Item Information: Multi-Purpos
• 8.8OZ CAN GAIN 2PK AIR FRESHENER Air Freshener
• DOT Placards & Holders
• Micro Drill Bit: 0.0625″ Dia, 130 °, Solid Carbide Amorphous Diamond Finish, RH Cut, Spiral Flute
• Micro Drill Bit: 0.0312″ Dia, 130 °, Solid Carbide Amorphous Diamond Finish, RH Cut, Spiral Flute
• Micro Drill Bit: 0.055″ Dia, 130 °, Solid Carbide Amorphous Diamond Finish, RH Cut, Spiral Flute
• Thread Forming Tap: 3/8-16, UNF, Modified Bottoming, High Speed Steel-CO, TiCN Finish 0.752″ Thread Length, 2.93″ OAL, H13, Series 14001
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D9 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D7 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D12 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D11 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D8 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D13 Series 14101
• Hex Head Cap Screw: 3/8-16 x 1″, Grade 17-4PH Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• Safety Glass: Scratch-Resistant, Polycarbonate, Clear Lenses, Full-Framed, UV Protection Black & Red Frame, Single, Adjustable
• Traffic Cones; Type: Traffic Cone With Base; Color: Fluorescent Orange; Reflective Collars: No; Height (Inch): 28; Base Width (Decimal Inch): 14.5000; Material: PVC; Compliance: MASH Compliant; MUTCD Standards; Weight (Lb.): 7.0000; Special Characteristic
• Plastic Sheet: Polypropylene, 1/2″ Thick, Semi-Clear White, 3,250 psi Tensile Strength Rockwell M-85
• Household Trash Bag: 13 gal, 0.8 mil, Pack of (80) 24″ Wide, 28″ High, Plastic, White
• #6 Screw 3/4″ OAL 0.14″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Anodized, Grade T-3, Female Unthreaded
• Welding Hose Fittings; Type: Hex Nipple; Material: Carbon Steel; Connection Type: Threaded
• Plasma Cutter Cutting Tips, Electrodes, Shield Cups, Nozzles & Accessories
• Welding Hose Fittings; Type: Hex Nipple; Material: Carbon Steel; Connection Type: Threaded
• Laundry Detergent; Form: Liquid; Container Size (oz.): 90; Scent: Crisp Linen; Description: Bottle
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1″ Thick, 6″ Long, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T40; Blade Length (mm): 175.0000; Overall Length (mm): 213.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T40; Handle Type: T-Handle; Additional
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T30; Blade Length (mm): 150.0000; Overall Length (mm): 188.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T30; Handle Type: T-Handle; Additional
• Indexable Broaching Accessories; Accessory Type: Torx Driver; For Use With: Size 2, 3, 4 & 5 Tool Holder; Additional Information: T-08
• Spot Welder Tips; Tip Type: Single Bend Tip A Nose (Pointed); Material: RWMA Class 2 - C18200; Type: Single Bend Tip A Nose (Pointed)
• Black Countersunk Square Plug: 1″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Cut & Puncture-Resistant Gloves: Size 2XS, ANSI Cut A8, ANSI Puncture 5, Rubber Latex, HPPE Black & Yellow, 10″ OAL, Palm & Fingertips Coated, Coretex Lined, HPPE Back, Single Dipped Grip
• Cut & Puncture-Resistant Gloves: Size 3XL, ANSI Cut A8, ANSI Puncture 5, Rubber Latex, HPPE Black & Yellow, 10″ OAL, Palm & Fingertips Coated, Coretex Lined, HPPE Back, Single Dipped Grip
• Hex Head Cap Screw: 5/16-18 x 2″, Grade 17-4PH Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• Inspection & Quality Label: ″Mixed Parts/Pates Mixtas″, Rectangle, 5″ Wide, 3″ High Paper
• Extra Length Drill Bit: 0.2047″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Lumber; Thickness: 2; Width: 4; Length Ft.: 8; Wood Type: Southern Yellow Pine; Treated: KDHTPT
• #10 Screw 1-3/4″ OAL 0.192″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Welding Hose Fittings; Type: Hex Nipple; Material: Carbon Steel; Connection Type: Threaded
• Patio Furniture Parts & Accessories; Type: Umbrella Base; Material: HDPE; Color/Finish: Bronze
• Impact Socket: 1″ Drive 6-Point
• Patio Furniture Parts & Accessories; Type: Umbrella Base; Material: HDPE; Color/Finish: Black
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Square End Mill: 9/32'' Dia, 3/4'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Straight Blade Connector: Industrial, 5-20R, 125VAC, Yellow Self-Grounded, 20A, Thermoplastic Body, 2 Poles, 3 Wires
• Square End Mill: 9/32'' Dia, 3/4'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Black Tee: 3/8 x 1/4 x 1/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Black 90 ° Elbow: 3/4″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Boring Bar: 8 mm Min Bore, 25 mm Max Depth, Right Hand Cut, Solid Carbide 8 mm Shank Dia, 63 mm OAL
• Pipe Reducing Hex Nipple: 1/2 x 1/4″ Fitting, 316 Stainless Steel MNPT x MNPT, Threaded, ANSI/ASME B31.1, ANSI/ASME B31.3 & ANSI/ASME B1.20.1, 7,200 psi
• Screw Machine Length Drill Bit: 0.1575″ Dia, 150 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series A1167B
• #8 Screw 5/32″ OAL 0.166″ ID x 5/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Diamond Pattern Router Bit: 1″ LOC, 3/8″ Shank Dia, Plain 3″ OAL, Micro Grain Carbide, Diamond Finish
• Welding Gloves: Size 2X-Large, Uncoated, TIG Welding Application Natural, 12.88″ OAL, Uncoated Coverage, Smooth Grip
• Diamond Pattern Router Bit: 30 mm LOC, 10 mm Shank Dia, Plain Micro Grain Carbide, Diamond Finish
• Nylon Tube: 3/8″ ID, 1/2″ OD, 10' Long 400 Max psi, Black
• Welding Hose Fittings; Type: Hex Nipple; Material: Carbon Steel; Connection Type: Threaded
• Hex Head Cap Screw: 5/16-18 x 3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• 320 Grit Aluminum Oxide Rectangular Polishing Stone Extra Fine Grade, 3/4″ Wide x 6″ Long x 1/8″ Thick
• 400 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 3/4″ Wide x 6″ Long x 1/8″ Thick
• Emergency Light Assemblies; Type: Flush Mount Led Warning Light; Flash Rate: Variable; Mount: Flush Mount; Color: Red; Power Source: 12-24V DC; Shape: Round; Specifications: ECE, DOT REQUIREMENTS
• Emergency Light Assemblies; Type: Flush Mount Led Warning Light; Flash Rate: Variable; Mount: Flush Mount; Color: Amber; Power Source: 12-24V DC; Shape: Round; Specifications: ECE, DOT REQUIREMENTS
• Ball Grip Quick-Release Pin: L-Handle, 6 mm Pin Dia, 80 mm Usable Length 112.3 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Closed Cell EPDM Foam: 12″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• Ball Grip Quick-Release Pin: L-Handle, 5 mm Pin Dia, 80 mm Usable Length 112.3 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Polyimide Film Tape: 1″ Wide, 36 yd Long, 2.3 mil Thick 23 Lb/In Tensile Strength, Acrylic Adhesive, -20 to 350 ° F
• 6 Piece Wood Gouge Set 7″ OAL, Steel Blade
• Pullers, Extractors & Specialty Wrenches; Product Type: Valve Wheel Hook; Overall Length (Decimal Inch): 6.2992
• Micro Drill Bit: 0.0492″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Micro Drill Bit: 0.0433″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Taper Length Drill Bit: 0.3543″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Micro Drill Bit: 0.0315″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Micro Drill Bit: 0.0292″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Micro Drill Bit: 0.0248″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Micro Drill Bit: 0.0181″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Micro Drill Bit: 0.0173″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Extra Length Drill Bit: 0.3346″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Micro Drill Bit: 0.0169″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Micro Drill Bit: 0.0156″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Micro Drill Bit: 0.0126″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Micro Drill Bit: 0.0091″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Micro Drill Bit: 0.0087″ Dia, 118 °, Cobalt TiN Finish, 0.984″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 660
• Bandages & Dressings; Dressing Type: Wrap; Bandage Material: Rubber; Form: Gel; Dressing Size: Medium; Bandage Style: General Purpose; Additional Information: Waterproof; Style: General Purpose; Waterproof/Water Resistant: Waterproof
• Household Trash Bag: 30 gal, 1.05 mil, Pack of (70) 30″ Wide, 32″ High, Plastic, Black
• Taper Length Drill Bit: 0.1719″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Taper Length Drill Bit: 0.0335″ Dia, 118 ° Bright/Uncoated, RH Cut, Spiral Flute, Cylindrical Shank, Series 317
• Sheet: Buna-N Rubber, 12″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Taper Length Drill Bit: 0.0595″ Dia, 118 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 317
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Taper Length Drill Bit: 0.0354″ Dia, 118 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 317
• Taper Length Drill Bit: 0.0315″ Dia, 118 ° Bright/Uncoated, RH Cut, Cylindrical Shank, Series 317
• Taper Length Drill Bit: 0.0276″ Dia, 118 ° Bright/Uncoated, RH Cut, Straight Shank, Series 317
• Micro Drill Bit: 0.0323″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0311″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• All-Purpose Cleaner: 1 gal Bottle, Disinfectant Liquid, Lemon Scent
• Micro Drill Bit: 0.0307″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Household Trash Bag: 30 gal, 1.1 mil, Pack of (74) 30″ Wide, 33″ High, Plastic, Black
• Micro Drill Bit: 0.0303″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0291″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0287″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0283″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Trade Hammers; Handle Material: Hickory
• Micro Drill Bit: 0.028″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0272″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Acrylic Adhesive Backing