Products

• Corner Radius End Mill: 5/64″ Dia, 5/16″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Spot Welder Tips; Tip Type: Straight Tip C Nose (Flat); Material: RWMA Class 2 - C18200; Type: Straight Tip C Nose (Flat)
• Spot Welder Tips; Tip Type: Straight Tip B Nose (Dome); Material: RWMA Class 2 - C18200; Type: Straight Tip B Nose (Dome)
• Pipe Adapter: 1/4″ Fitting, 316 Stainless Steel FNPT x MNPT, 6,200 psi
• Black Hex Bushing: 3-1/2 x 1-1/4″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• 3/4 x 12″ 6063 Aluminum Pipe Nipple Threaded with Thread Sealant, Schedule 40
• Ball Grip Quick-Release Pin: Button Handle, 7/16″ Pin Dia, 4″ Usable Length 5.16″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Pipe Fitting: 1 x 1/2″ Fitting, 304 Stainless Steel 150 psi
• 1/4″ & 1/2″ Inlet, 1/4″ Outlet Manifold 1-1/2″ Long x 1-1/2″ Wide 1-1/2″ High, 5/8″ Mount Hole, 1 Inlet Port, 3 Outlet Ports
• Plastic Sheet: Polyimide
• Strip: Buna-N Rubber, 1″ Wide, 120″ Long, Black Durometer 70, Plain Backing
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 4.00; Maximum Range (mm): 7.40
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 6.00; Maximum Range (mm): 9.40
• Spiral Flute Tap: M2.50 x, 0.45, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D3 & D4,Series 0393
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 7.00; Maximum Range (mm): 11.00
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 5.00; Maximum Range (mm): 8.40
• Collet Coolant Seals; Compatible Collet Series: ER; Minimum Range (mm): 8.00; Maximum Range (mm): 11.00
• Silicone Tube: 3/8″ OD, 25' Length 40 Max psi, Red
• Square End Mill: 1/2'' Dia, 1'' LOC, 1/2'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Silicone Tube: 3/8″ OD, 25' Length 40 Max psi, Blue
• Polyimide Film Tape: 1″ Wide, 5 yd Long, 2.7 mil Thick 33 Lb/In Tensile Strength, Silicone Adhesive, -99.4 to 500 ° F
• Silicone Tube: 3/8″ OD, 25' Length 40 Max psi, Clear
• Chucking Reamer: 0.0827″ Dia, 2″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Chucking Reamer: 0.0405″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 35.0000; Finish Coating: TiCN; Serie
• 2" x 650' 120 Gauge Clear Stretch Film on Unique Dispenser
• Die Drill Bit: 0.2441″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Sheet: SBR Rubber, 36″ Wide, 36″ Long, Black Durometer 75, Plain Backing
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SAP-NB
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SAP-NB
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, Clear Rockwell M-95
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• #10-32, 1-1/8″ OAL, 3/8″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 3/4″ Body Length, 3/8″ Thread Length, 1/2″ Thread Depth, Grade 360, Zinc-Plated
• Grooving Insert: GRIP3003Y IC808, Solid Carbide AlTiN, TiAlN & TiN Finish, Neutral, 3 mm Cutting Width, 1.8 mm Max Depth, Series Heli-Grip
• Solid Counterbores; Cutter Diameter (Decimal Inch): 0.1875; Shank Diameter (Inch): 3/16; Flute Length (Decimal Inch): 0.5620; Overall Length (Inch): 2; Material: Solid Carbide; Number of Flutes: 4
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Chamfer Mill: 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Solid Counterbores; Cutter Diameter (Decimal Inch): 0.1875; Shank Diameter (Inch): 3/16; Flute Length (Decimal Inch): 0.6250; Overall Length (Inch): 2; Material: Solid Carbide; Number of Flutes: 4
• 2" x 650' 120 Gauge Clear Stretch Film Refill
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Die Drill Bit: 0.2040″ Dia, 140 °, Solid Carbide Uncoated, 1-1/4″ Flute, 2-3/8″ OAL, Series 106
• Square End Mill: 1/8'' Dia, 1/2'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Hook & Loop; Shape: Square; Tape Width: 1.00 in; Color: Black; Piece Length (Inch): 1; Component Type: Hook & Loop; Number Of Pieces: 100.000
• RECT POS RAKE RH Carbide Milling Insert Megacoat Nano Finish, 0.8976″ Long x 16.9mm Thick x 12.5mm Wide
• PARALLEL POS RAKE RH Carbide Milling Insert DLC Finish, 5.1mm Thick x 9.9mm Wide
• RECT POS RAKE RH Carbide Milling Insert Megacoat Nano Finish, 0.8976″ Long x 16.6mm Thick x 12.5mm Wide
• Turning Insert: VPGT1003ZZ-FL TIALN+, Solid Carbide TiAlN Finish, Left Hand, 1/4″ Inscribed Circle, 35.0 &deg N/A Diamond, Series VPGT
• Air Cylinder Accessories; Type: Swivel Yoke; Accessory Type: Swivel Yoke; For Use With: Piston rod; Material: Stainless Steel
• Compression Spring: 2.174″ OD, 8″ Free Length 0.192″ Wire Dia, 82.561 lb Max Load, 21.323 lb/in Spring Rate, Stainless Steel
• Plastic Sheet: Acetal, 1/16″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Compression Spring: 2.174″ OD, 7″ Free Length 0.192″ Wire Dia, 82.561 lb Max Load, 23.927 lb/in Spring Rate, Stainless Steel
• Ball Grip Quick-Release Pin: L-Handle, 16 mm Pin Dia, 30 mm Usable Length 73.2 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Ball Grip Quick-Release Pin: T-Handle, 8 mm Pin Dia, 100 mm Usable Length 132.3 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Compression Spring: 2.35″ OD, 5.75″ Free Length 0.207″ Wire Dia, 93.425 lb Max Load, 34.017 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.409″ OD, 4.5″ Free Length 0.225″ Wire Dia, 113.515 lb Max Load, 57.604 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.645″ OD, 9″ Free Length 0.177″ Wire Dia, 86.775 lb Max Load, 22.387 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.409″ OD, 5.75″ Free Length 0.207″ Wire Dia, 91.24 lb Max Load, 32.725 lb/in Spring Rate, Stainless Steel
• Welded Bandsaw Blade: 19' Long, 1/4″ Wide, 0.025″ Thick, 4 TPI Carbon Steel, Toothed Edge
• Compression Spring: 1.998″ OD, 5.5″ Free Length 0.207″ Wire Dia, 108.967 lb Max Load, 46.815 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.175″ OD, 5.25″ Free Length 0.207″ Wire Dia, 176.487 lb Max Load, 160.353 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 3.75″ Free Length 234.346 lb Max Load, 313.541 lb/in Spring Rate, Stainless Steel
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 0.6300 in; Maximum Drill Size: 0.9840 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Compression Spring: 2.056″ OD, 5.5″ Free Length 0.207″ Wire Dia, 106.065 lb Max Load, 44.519 lb/in Spring Rate, Stainless Steel
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 0.6300 in; Maximum Drill Size: 0.9840 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Compression Spring: 2.585″ OD, 4.5″ Free Length 0.225″ Wire Dia, 106.141 lb Max Load, 51.427 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.233″ OD, 7″ Free Length 0.192″ Wire Dia, 80.477 lb Max Load, 22.949 lb/in Spring Rate, Stainless Steel
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 1.4960 in; Maximum Drill Size: 1.8110 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Compression Spring: 2.644″ OD, 4.5″ Free Length 0.225″ Wire Dia, 103.877 lb Max Load, 49.652 lb/in Spring Rate, Stainless Steel
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 0.6300 in; Maximum Drill Size: 0.9840 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Compression Spring: 1.293″ OD, 4″ Free Length 0.25″ Wire Dia, 261.179 lb Max Load, 417.28 lb/in Spring Rate, Stainless Steel
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 0.6300 in; Maximum Drill Size: 0.9840 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Compression Spring: 1.293″ OD, 4.75″ Free Length 0.225″ Wire Dia, 200.667 lb Max Load, 205.07 lb/in Spring Rate, Stainless Steel
• Masking Tape: 72 mm Wide, 55 m Long, 4.7 mil Thick, Beige Crepe Paper, Rubber Adhesive, 22 lb/in Tensile Strength
• 20.00 Volt, Pistol Grip Cordless Impact Wrench
• Compression Spring: 2.056″ OD, 6.75″ Free Length 0.192″ Wire Dia, 87.066 lb Max Load, 27.195 lb/in Spring Rate, Stainless Steel
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 0.4720 in; Maximum Drill Size: 0.5500 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Flap Disc: 7/8″ Hole, 36 Grit, Ceramic, Type 27 Coated, Fiber-Backed, 12,200 RPM
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 1.1810 in; Maximum Drill Size: 1.2600 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Flap Disc: 7/8″ Hole, 50 Grit, Ceramic, Type 27 Coated, Fiber-Backed, 12,200 RPM
• Compression Spring: 2.174″ OD, 5.5″ Free Length 0.207″ Wire Dia, 100.608 lb Max Load, 40.485 lb/in Spring Rate, Stainless Steel
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 0.6300 in; Maximum Drill Size: 0.7080 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Flap Disc: 7/8″ Hole, 80 Grit, Ceramic, Type 29 Coated, Fiber-Backed, 12,200 RPM
• Grooving Insert: TDITT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDIT-E (Full Radius)
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use To
• Non-Woven Rolls; Abrasive Material: Aluminum Oxide; Roll Width: 4; Grade: Very Fine; Grit: 0; Overall Length (Decimal Inch): 4.00; Overall Length: 4.00
• Grooving Insert: TDITT TT7220, Solid Carbide TiCN Finish, Neutral, 0.157″ Cutting Width, Series TDIT-E (Full Radius)
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use Tool
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.157″ Cutting Width, Series TDT-E (Full Radius)
• Cut-Off Inserts; Insert Style: TDC; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Grooving Insert: TDTT TT8020, Solid Carbide TiCN Finish, Neutral, 0.157″ Cutting Width, Series TDT-E (Full Radius)
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDT-E (Full Radius)
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use Tool
• Compression Spring: 2.115″ OD, 6.75″ Free Length 0.192″ Wire Dia, 84.754 lb Max Load, 25.977 lb/in Spring Rate, Stainless Steel
• Cut-Off Inserts; Insert Style: TDJ; Insert Size Code: 4; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 4.000; Relief Angle: 7.000; Multi-use To
• Compression Spring: 1.88″ OD, 6.5″ Free Length 0.192″ Wire Dia, 94.764 lb Max Load, 32.934 lb/in Spring Rate, Stainless Steel
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 72 Pitch, 20° Pressure Angle, Round
• Compression Spring: 2.35″ OD, 7″ Free Length 0.192″ Wire Dia, 76.638 lb Max Load, 21.238 lb/in Spring Rate, Stainless Steel
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 72 Pitch, 14.5° Pressure Angle, Square
• Compression Spring: 2.233″ OD, 5.5″ Free Length 0.207″ Wire Dia, 98.081 lb Max Load, 38.736 lb/in Spring Rate, Stainless Steel
• Indexable Drill Insert: 13 BK8425, Carbide TiAlN & TiN Finish, Trigon
• Micro Drill Bit: 0.0787″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Compression Spring: 1.116″ OD, 5.25″ Free Length 0.207″ Wire Dia, 184.396 lb Max Load, 185.173 lb/in Spring Rate, Stainless Steel
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 32 Pitch, 14.5° Pressure Angle, Square
• Compression Spring: 2.291″ OD, 5.5″ Free Length 0.207″ Wire Dia, 95.717 lb Max Load, 37.161 lb/in Spring Rate, Stainless Steel
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 48 Pitch, 14.5° Pressure Angle, Square
• Micro Drill Bit: 0.0689″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Milling Insert: ONGX0806ANSNGP, KCK20B, Solid Carbide N/A Finish,
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 72 Pitch, 20° Pressure Angle, Round
• Micro Drill Bit: 0.0709″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Micro Drill Bit: 0.0748″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 64 Pitch, 20° Pressure Angle, Square
• Spiral Flute Tap: #12-28, DIN & ANSI, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 1.063″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• Spiral Flute Tap: #8-36, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 0.827″ Thread Length, 2.4803″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• Micro Drill Bit: 0.0768″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Spiral Flute Tap: #6-40, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 0.787″ Thread Length, 2.2047″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 72 Pitch, 14.5° Pressure Angle, Square
• Micro Drill Bit: 0.0728″ Dia, 140 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6200 HP
• Spiral Flute Tap: #12-24, DIN & ANSI, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 1.063″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 72 Pitch, 14.5° Pressure Angle, Round
• Spiral Flute Tap: #6-32, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, Black Oxide Finish 0.787″ Thread Length, 2.2047″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 48 Pitch, 14.5° Pressure Angle, Square
• Spiral Flute Tap: #6-32, DIN & ANSI, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 0.787″ Thread Length, 2.2047″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• Spiral Flute Tap: #10-32, DIN & ANSI, 3 Flute, Modified Bottoming, 2B Class of Fit, Black Oxide Finish 1.024″ Thread Length, 2.7559″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 48 Pitch, 20° Pressure Angle, Round
• Spiral Flute Tap: #8-32, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, Black Oxide Finish 0.827″ Thread Length, 2.4803″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 32 Pitch, 20° Pressure Angle, Round
• Spiral Flute Tap: #12-28, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Black Oxide Finish 1.063″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 20 Pitch, 14.5° Pressure Angle, Square
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 32 Pitch, 14.5° Pressure Angle, Square
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 96 Pitch, 20° Pressure Angle, Square
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 24 Pitch, 14.5° Pressure Angle, Square
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 48 Pitch, 14.5° Pressure Angle, Round
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 72 Pitch, 20° Pressure Angle, Square
• Indexable Drill Insert: TPMX28G UC2220, Carbide Coated, 60 ° Triangle
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 32 Pitch, 20° Pressure Angle, Square
• Flap Disc: 7/8″ Hole, 80 Grit, Aluminum Oxide, Type 27 Coated, Fiber-Backed, 12,200 RPM
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.1291MC
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 20 Pitch, 20° Pressure Angle, Square
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 32 Pitch, 20° Pressure Angle, Square
• Indexable Drill Insert: 32 BK8425, Carbide TiAlN & TiN Finish, Square
• Indexable Drill Insert: 34 BK8425, Carbide TiAlN & TiN Finish, Square
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 96 Pitch, 20° Pressure Angle, Round
• CD-R Disc: Use with CD & DVD
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 64 Pitch, 14.5° Pressure Angle, Square
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 24 Pitch, 20° Pressure Angle, Round
• Compression Spring: 2.409″ OD, 7″ Free Length 0.192″ Wire Dia, 74.837 lb Max Load, 20.473 lb/in Spring Rate, Stainless Steel
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 48 Pitch, 20° Pressure Angle, Square
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 64 Pitch, 14.5° Pressure Angle, Round
• Compression Spring: 1.351″ OD, 7.5″ Free Length 0.177″ Wire Dia, 104.178 lb Max Load, 39.101 lb/in Spring Rate, Stainless Steel
• Metal Push-To-Connect Tube Fittings; Fitting Type: EL SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/8″; Tube Outside Diameter: 3/4; Fitting Shape: 90 ™ Elbow; Maximum Working Pressure (Psi
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 20 Pitch, 20° Pressure Angle, Round
• Turning Insert: TNMG544RP, High Temperature Alloy AlTiN Finish, 0.6250″ Long, 0.0625″ Corner Radius, N/A Series KENLOC
• Metal Push-To-Connect Tube Fittings; Fitting Type: EL SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/4″; Tube Outside Diameter: 3/8; Fitting Shape: 90 ™ Elbow; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards:
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 20 Pitch, 14.5° Pressure Angle, Round
• Compression Spring: 1.821″ OD, 5.25″ Free Length 0.207″ Wire Dia, 118.87 lb Max Load, 58.421 lb/in Spring Rate, Stainless Steel
• Grooving Insert: HGR3003 IC328, Solid Carbide TiCN Finish, Right Hand, 0.1181″ Cutting Width, Series Do-Grip
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 96 Pitch, 14.5° Pressure Angle, Round
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 64 Pitch, 20° Pressure Angle, Round
• Woodruff Keyseat Cutter: 0.093″ Cut Dia, 0.047″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 48 Pitch, 20° Pressure Angle, Round
• Ball End Mill: 0.035″ Dia, 0.175″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Ball End Mill: 0.1875″ Dia, 0.281″ LOC, 3 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 32 Pitch, 14.5° Pressure Angle, Round
• Woodruff Keyseat Cutter: 0.093″ Cut Dia, 0.062″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 32 Pitch, 20° Pressure Angle, Round
• Top Plate Caster: 3" Wheel Dia, 13/16" Wheel Width, 3-9/16" OAH
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 72 Pitch, 20° Pressure Angle, Square
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0817MC
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 64 Pitch, 14.5° Pressure Angle, Square
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 64 Pitch, 20° Pressure Angle, Round
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 72 Pitch, 14.5° Pressure Angle, Round
• Spiral Point Tap: #10-24, UNC & DIN/ANSI, 3 Flutes, Plug, HSS-E, TiAlN Finish 13 mm Thread Length, 70 mm OAL, Right Hand, H7, Series TC217
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 48 Pitch, 20° Pressure Angle, Square
• Ball End Mill: 0.118″ Dia, 0.95″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 32 Pitch, 14.5° Pressure Angle, Round
• Square End Mill: 1/64'' Dia, 0.023'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 64 Pitch, 14.5° Pressure Angle, Round
• Square End Mill: 5/16'' Dia, 1'' LOC, 5/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• 3/16″ Diam 1' Long 1018/12L14 Steel Gear Rack 48 Pitch, 14.5° Pressure Angle, Round
• 1/4″ Face Width 1' Long 1018/12L14 Steel Gear Rack 24 Pitch, 20° Pressure Angle, Square
• 1/4″ Diam 1' Long 1018/12L14 Steel Gear Rack 24 Pitch, 14.5° Pressure Angle, Round
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 64 Pitch, 20° Pressure Angle, Square
• 3/16″ Face Width 1' Long 1018/12L14 Steel Gear Rack 96 Pitch, 14.5° Pressure Angle, Square
• Hard Hat: Impact Resistant, Full Brim, Type 1, Class E, 4-Point Suspension Green, Polyethylene
• SCIL 41-300L15K00 Carbide Cutoff Insert TiAlN/TiN Finish, 15° LH Lead Angle, LH Insert, 3mm Cutting Width, 0.0008″ Corner Radius
• Ball End Mill: 0.125″ Dia, 4 Flute, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 35 & 38 ° Helix, AlCr Coated, Single End, Series 3900L
• Micro Drill Bit: 0.0386″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Micro Drill Bit: 0.0346″ Dia, 118 °, Cobalt Bright/Uncoated, LH Cut, Spiral Flute, Oversized Shank, Series 303
• Hand Sanding Pad: 6″ Wide, 9″ Long Maroon
• Taper Length Drill Bit: 0.2055″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Taper Length Drill Bit: 0.2165″ Dia, 130 ° Bright/Uncoated, 3.523″ Flute Length, RH Cut, Parabolic Flute, Straight Shank, Series 336
• 5" Diam x 1-1/4" Wide x 6-1/4" OAH Standard Caster
• Welded Bandsaw Blade: 14' 9″ Long, 1/2″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Welded Bandsaw Blade: 14' 7-1/2″ Long, 3/8″ Wide, 0.025″ Thick, 3 TPI Carbon Steel, Toothed Edge
• Welded Bandsaw Blade: 14' 10″ Long, 3/8″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• 3/32″, 3/16″ LOC, 1/8″ Shank Diam, 1-1/2″ OAL, 2 Flute, Solid Carbide Square End Mill Double End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 162
• Ink Cartridge: Black Use with HP DeskJet 3,755 (J9V91A#B1H), HP DeskJet 2,655 (V1N04A#B1H) & HP ENVY 5,055 (M2U85A#B1H)
• Hex Head Cap Screw: M8 x 1.25 x 25 mm, Grade 10.9 Steel, Zinc-Plated Partially Threaded, 13 mm Hex, AS 1110, ISO 4014 & ISO 4017
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Sheet: Silicone Rubber, 18″ Wide, 36″ Long, Red Durometer 60, Plain Backing
• Linear Motion Systems; Type: Linear Guide; Linear Motion Type: Linear Guide; Overall Width (Decimal Inch): 0.6300; Overall Length (mm): 6.3500
• Flexible Coupling: Cast Iron
• Flexible Coupling: Cast Iron
• Flexible Coupling: Cast Iron
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• #4-40, 1.687″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/2″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 303, Uncoated
• M3.5x0.6, 12.35mm OAL, 6mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 6mm Body Length, 6.35mm Thread Length, 2.8mm Thread Depth, Grade 303, Uncoated
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.04″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.031″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide
• Square End Mill: 3/64'' Dia, 9/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, Upcut Flute, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Closed Cell EPDM Foam: 12″ Wide, 24″ Long, Black Acrylic Adhesive Backing
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.125″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide
• Tool Pouches & Holsters; Holder Type: Tool Pouch; Tool Type: Wrenches, Ratchets, Extensions; Closure Type: Tie; Material: Vinyl; Color: Blue, Black
• Micro Drill Bit: 0.067″ Dia, 130 °, Solid Carbide TiB2 Finish, RH Cut, Spiral Flute
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Micro Drill Bit: 0.0625″ Dia, 130 °, Solid Carbide TiB2 Finish, RH Cut, Spiral Flute
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Shop Roll
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Shop Roll
• Tapered End Mill: 22.5 ° per Side, 0.194″ LOC, 2 Flutes, Solid Carbide, Ball End 2″ OAL, Uncoated, Series Runner Cutters
• Shop Roll
• Tapered End Mill: 7 ° per Side, 0.286″ LOC, 2 Flutes, Solid Carbide, Ball End 1″ Shank Dia, 1-1/2″ OAL, Uncoated, Series Runner Cutters
• Tapered End Mill: 7 ° per Side, 0.401″ LOC, 2 Flutes, Solid Carbide, Ball End 1″ Shank Dia, 1-1/2″ OAL, Uncoated, Series Runner Cutters
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, nACRo Coated, Corner Radius End
• Shop Roll
• Double Angle Milling Cutter: 90 °, 1/8″ Cut Dia, 0.073″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, Uncoated, 4 Teeth
• Micro Drill Bit: 0.042″ Dia, 140 °, Solid Carbide AlTiN Finish, RH Cut, Spiral Flute
• Double Angle Milling Cutter: 45 °, 3/16″ Cut Dia, 0.095″ Cut Width, 3/16″ Shank Dia, Solid Carbide 2″ OAL, Uncoated, 4 Teeth
• Trade Hammers; Handle Material: Hickory
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Plastic Bar: Polytetrafluoroethylene, 3/32″ Thick, White
• Spiral Flute Tap: M12 x 1.75, Metric Coarse, 3 Flute, Plug, 6H Class of Fit, Vanadium High Speed Steel, Bright/Uncoated 0.935″ Thread Length, 3.38″ OAL, Right Hand Flute, Right Hand Thread, D6
• Micro Drill Bit: 0.055″ Dia, 140 °, Solid Carbide AlTiN Finish, RH Cut, Spiral Flute
• Clear Double-Sided Polyester Film Tape: 1/2″ Wide, 2 yd Long, 8.3 mil Thick, Acrylic Adhesive
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, Black Shore D-70
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: Crane White; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 17; Minimum Order Quantity: Plastic; Material: Plastic
• Toilet Seats; Type: Open Front w/o Cover; Style: Round; Material: Plastic; Color: Bone; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 17; Minimum Order Quantity: Plastic; Material: Plastic
• Plastic Bar: Acetal, 1″ Thick, White
• Jobber Length Drill Bit: 0.4016″ Dia, 130 °, High Speed Steel Bright/Uncoated, 5.2362″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Toilet Seats; Type: Closed Front w/ Cover; Style: Round; Material: Plastic; Color: Biscuit; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 17; Minimum Order Quantity: Plastic; Material: Plastic